|
| 1 | Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed |
| 2 | Dismantling of plain or corrugated steel sheeting any gauge / thickness in roof covering etc, complete all as specified and directed. |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet tile profile roof sheet 0.50mm thick, AZ-70 of anycolour having tensile strength of 240 Mpa as in roof covering / cladding towall, fixed with self tapping screws, complete all as specified and directed. |
| 4 | S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as of roof covering / ridges fixed with self tapping screws, complete all as specified and directed. |
| 5 | M&L for structural steel work, rolled mild steel as in joist, channel, angle, steel square tubing or Tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed. |
| 6 | S&F rolled mild steel as in roof trusses (framed) trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, Tee, Angle, Channel or flat section) including distance pieces, cleats etc. conforming to IS 1161-1979 gde ST 240, complete all as specified and directed. |
| 7 | Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. |
| 8 | Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. |
| 9 | Preparation of old paintedwooden surfaces exc 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed. |
| 10 | M&L for french polishing on surfaces of any description, width or girth including cleaning and preparation of surfaces including a coat of wood filler on old work with one or more coats, complete all as specified and directed. |
| 11 | Preparing old painted wooden surfaces of any description, n.exc 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 12 | M& L for two coats of wall care putty, level and smoothen the surface and cure the first coat lightly once it dries apply the second coat of 0.5-1 mm thickness once the first coat is fully dried and set. The thickness of each coat should not exceed 1mm and total thickness of putty should not be less than 1.5mm, complete all as specified and directed. |
| 13 | Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed. |
| 14 | S & FSolid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge |
| 15 | S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given in SSR Part-II2020 Refer item No. 8080 as specified and directed by Engr-in-charge. |
| 16 | S&F Butt hinges 100mm medium weight cold rolled, mild steel, complete all as specified and directed. |
| 17 | S&F aluminium anodised barrel tower bolt 200mm legth of excluded section and fixed, complete all as specified and directed. |
| 18 | S&F in repair aluminium anodised barrel tower bolt 200mm legth of excluded section and fixed, complete all as specified and directed. |
| 19 | S&F Aluminium handle cast type, anodised 200mm, complete all as specified and directed. |
| 20 | M&L for prepration ofnew or previously untreated steel surface and apply two coats synthetic enamelled paint over one coat of red oxide primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified and directed. |
| 21 | M&L for Polished Vitrified Ceramic tiles 10 mm thick of size 600 x 1200mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 15mm thick screed bed in CM (1:6) including demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and as directed. |
| 22 | M&L for PGVTtiles 10 mm thick of size 600 x 1200mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,including 15mm thick screed bed in CM (1:6) including demolition of old existing unserviceable stone slabs or tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and as directed. |
| 23 | M & L for Non skid joint free ceramic coloured (dark shade) tiles of size 300mm x 300mm x 7 to 8mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) including demolition of old existing unserviceable stone slabs or tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and directed by Engineer-in-Charge. |
| 24 | M & L for glazed colour ceramic tiles of size 300mmx600mm x 7 to 8mm thick as in skirting / dado, laid over and including10 mm thick CM (1:4) backing coat, set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles, including triangular filleting in cm 1:4 on top edges, including demolition of old existing unserviceable tiles / plaster of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and directed by Engineer-in-Charge. |
| 25 | M/L for 25 mm thick concrete type B0 1:2:4 using 12.50 mm graded stone aggregate as in floor leveling course etc.incl demolition of cement concrete, complete all as specified and directed. |
| 26 | M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills ,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15mm thick screed bed in CM (1:6) including dismantling of old unserviceable stone slabs or tiles of any description or thickness, complete all as specified and directed. |
| 27 | Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed. |
| 28 | M&L for machine cut cuddappa stone 20 to 22 mm thick both side polished bedded & jointed in CM 1:3, laid over and including 15mm thick screed bed in CM (1:6) including dismantling of old stone slabs and tiles of any description or thickness, complete all as specified and directed. |
| 29 | M&L for cement concrete type B1, 1:2:4 (Using 20 mm graded crushed stone aggregate) as in coping, coving, edging etc including necessary form work including demolition of existing cement concrete. complete all as specified and |
| 30 | M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick / stone / concrete surfaces with sagol finish including taking down of old existing cement plaster , complete all as specified and as directed. |
| 31 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick / stone / concrete surfaces with sponge finishincluding taking down of old existing cement plaster complete all as specified and as directed. |
| 32 | M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, builtin CM (1:6) including demolition of old existing brick work, solid block or stonemasonry built in cement mortar or cement lime mortarcomplete all as specified & directed. |
| 33 | M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick / concrete / stone surfaces with sagol finish cement plaster complete all as specified and as directed. |
| 34 | M&L for complete removal of existing treatment on wall and applying two coast of oil bound distemper over a coat of alkali resistence primer, white or tinted on wall complete all as speficied and directed. |
| 35 | M&L for complete removel of existing treatmentof walls by scrapping, cleaning by water jet, soffits / facia of chajja / roof slab etc and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, complete all as speficied and directed. |
| 36 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as speficied and directed. |
| 37 | M&L for prepration of newly plastered sureface and applying two coats oil bound distemper complete all as specified and as directed. |
| 38 | M & L for 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixedon walls and ceilings or laid in floors etc including taking up or down of old unserviceable steel tubing and connections, complete all as specified and directed. |
| 39 | M & L for 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixedon walls and ceilings or laid in floors etc including taking up or down of old unserviceable steel tubing and connections, complete all as specified and directed. |
| 40 | M & L for 25 mm bore GI tubing medium grade including with all fitting & fixtures, fixedon walls and ceilings or laid in floors etc including taking up or down of old unserviceable steel tubing and connections, complete all as specified and directed. |
| 41 | S&F rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including 20 mm ball valve high pressurePTMT with rod & high density plastic ball and tank nipple of suitable size / dia including dismantling of old unserviceable existing water tank and removing to store, complete all as specified and directed by Engineer-in-Charge. |
| 42 | M & L for 18/19 mm thick perlaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard/ Pelmetswith teak beading of all sides fixed in repair complete all as specified and directed. |
| 43 | S&F continuous (piano) hinges, mild steel, bright finish, width of flaps (When open) 30mm, complete all as specified and directed. |
| 44 | S & F for 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw, complete all as specified and directed. |
| 45 | S & F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished, complete all as specified and directed. |
| 46 | S&F 600x450mm size looking mirror, 5 mm thick with aluminium angle frame, plain mirror of selected quality glass mounted in 6 mm thick commercial plywood and fixed to wooden plug with chromium plated brass and cup washer etc, complete all as specified and directed. |
| 47 | S&F stainless steel plate rack of size 36inch x 31inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe,fixed to wall with screws complete all as specified and as directed. Make – Blue Star, Silver Shine Cat No.KPR-315 or equivalent from Nirali/ Jain Brothers Sanitation Pvt Ltd (Jayna) as approved. |
| 48 | S&F toughened glass Corner glass Shelf 300 x 300 mm (12\"\" x 12\"\")with stainless steel brackets and railing complete all as specified and as directed. Make : CERA Cat No F5005103 or equivalent in Jaquar/Kohler |
| 49 | S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 , laid under floors with necessary socket, elbo & bendetc complete all as complete and directed. |
| 50 | S&F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Al die cast body) and fixed in repairs, complete all as specified and directed. |
| 51 | S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition & breaking up old unserviceable existing drain pipes PVC or AC set in CM or solvent, complete all as specified and directed. |
| 52 | S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition & breaking up old unserviceable existing drain pipes PVC or AC set in CM or solvent, complete all as specified and directed. |
| 53 | S&F in repair PVC (SWR) bends any radius 110 mm bore, complete all as specified and directed. |
| 54 | S&F in repair PVC (SWR) bends any radius 75 mm bore, complete all as specified and directed. |
| 55 | S&F in repair PVC (SWR) bends any radius 110 mm bore provided with access door, complete all as specified and directed. |
| 56 | S&F in repair PVC (SWR) bends any radius 75 mm bore provided with access door, complete all as specified and directed. |
| 57 | M & L for PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 58 | S&F brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed. |
| 59 | S&F aluminium powder coated three track sliding window with two shutters of 4mm thick tintedglass of modigaurdand one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining etc by using following aluminium powder coated sections conforming to catalogue of\"JINDAL\" or of equivalent make complete all as specified directed by Engr-in-Charge :-Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604. |
| 60 | S&F aluminium powder coated two track sliding window with two shutters of 4mm thick tintedglass of modigaurdincluding good quality of bearing handle, locks, PVC rubber lining etc by using following aluminium powder coated sections conforming to catalogue of\"JINDAL\" or of equivalent make complete all as specified directed by Engr-in-Charge:-Two track bottom – 20956, Two track top/vertical – 21432, Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 61 | S&Faluminium powder coated ventilator with moveable louvers including 100mm wide pinheaded glass strip by using following sections of using following aluminium powder coated sections conforming to catalogue of\"JINDAL\" or of equivalent make complete all as specified directed by Engr-in-Charge(a) Frame - 20048(b) Glazing clip - 19352 |
| 62 | M&L for aluminium powder coated louvered ventilator with provision of suitable space for fixing of exhaust fan including 100mm wide pinheaded glass strip by using following aluminium powder coated sections conforming to catalogue of\"JINDAL\" or of equivalent make complete all as specified directed by Engr-in-Charge:-Frame - 20048Glazing Clip - 19352 |
| 63 | S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle,5mm th plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board as bottom pannel both side laminated) by using following aluminium powder coated sections conforming to catalogue of\"JINDAL\" or of equivalent make complete all as specified directed by Engr-in-Charge:-(a)Rectangular tube - 14005(b)Vertical rail - 19501 (c) Top rail-19503 (d)Middle rail -20060(e)Bottom rail- 19511 |
| 64 | S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 65 | S&F salt grazed stone ware gully traps, square 150x150 size fixed in repairs, complete all as specified and directed |
| 66 | S&F 320mm dia UPVC rain water gutter (320mm height) including fittings such as end drop, running drop etc, complete all as specified and as directed. |
| 67 | S&F straps, supports orsuspenders, hooks for hanging fans , MS Plates, nut bolts, hold fast , clamps ,hooks and similar small articleetc. confirming to Fe 290 & Gde E-165, complete all as specified and directed |
| 68 | S&F 18mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work, complete all as specified and as directed. |
| 69 | S&F 2nd class hardwood Plain fillets, size exc. 6 and n. exc. 13 sqcm in square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed |
| 70 | S&F 2nd class hardwood Plain fillets, size exc. 13 and n. exc. 25 sqcm in square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed |
| 71 | S&F 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instructions complete all as specified and as directed |
| 72 | S&F Stainless Steel 304 grade Silver finish curtain rod,25 mm bore, medium weight complete all as specified & directed.Make : Herrlich Homes or equivalent |
| 73 | S&F Steel Chrome Finish Alloy Zinc Solid Jointless heavy Rod Curtain bracket and bracket Accessories for Door and Window etc complete all as specified and as directed.Make : WKS Cat Part No S123-001, 1 incch or equivalent. |
| 74 | S&F in repair 12mm thick toughened glass partitions with stainless steel supporting railing at top and other supporting clips/clamps of SS, glass having frosted/film finish complete all as specified and as directed. |
| 75 | S&F in repair 12mm thick toughened glass door, glass having frosted / film finish with stainless steel handle of 600mm (1No) and stainless steel handle of 200mm (1No) and mounted on double action Floor spring complete all as specified and as directed. |
| 76 | M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including dismantling of old unserviceable wall / ceiling boards of any thickness including cover fillets complete all as specified and directed.Note-1 : Design and pattern of ceiling shall be as approved by Engineer-in-Charge. |
| 77 | S&F 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous & calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling & tapping screws having Phillips head with under head cutter at 200 mm C/Cincluding finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish ( Frame work for ceiling shall be measured & paid separately) complete all as specified and directed.(Note-1 : Cost of making frame work for light fittings/ grills/ diffusers and cutting to shape in ceiling etc shall be deemed to be included in the quoted rate of item.) |
| 78 | S&F Single piece-WC with PP Seat cover, hinges, Fixing Accessories, Accessories set and cistern fittings complete all as specified andas directed.(Make : Jaquar of cat noCNS-WHT-853P180SPPSM or equivalent model in CERA clayton 2043,2343,2243/PARRYWARE Aquiline C8919(P-180) or as approved by GE. ) |
| 79 | S&F in repairs Hand Shower( Health faucet) with 1.00mtr flexible tube and wall hook with N.R.V. (back flow prevented)complete all as specified & directed. Make Jaquar Product code ALD-CHR-565 / Parrywareserene T9876A1 /Cera F8030401AB as approved by GE. |
| 80 | S&F Single lever Basin Mixer without popup waste with 600mm long Braided Hoses complete all as specified and directed.(Make : Jaquar Product code OPP-15005BPM /CERA GAYLE F1014452/Parryware G 3163A1 )as approved by GE. |
| 81 | S&F CP toilet paper holder confirming to CAT No ALD-CHR-1153S of \"Jaquar\" or Equivalent make as mentioned here in after, complete all as specified and directed. |
| 82 | S&F Soap dish confirming to CAT No ACN-WHM-1131N of \"Jaquar\" or Equivalent make as mentioned here in after, complete all as specified and directed. |
| 83 | S&F in repairs 2-Way Bib cock with Wall Flangecomplete all as specified & directed. Make : Jaquar Product code FUS-CHR-29041 or equivalent model in Kohler as approved by GE. |
| 84 | S&Fin repairs, CP, fancy type bib cock with wall flangecomplete all as specified & directed. Make : Jaquar Product code OPP-15037PM or equivalent model in Kohler as approved by GE. |
| 85 | S&F Semi insert Counter top basin of Size 570x420x195mm complete all as specified & directed. Make : Jaquar Product code FLS-WHT-5601 or equivalent model in Kohler as approved by GE. |
| 86 | S&F Bottle trap (with internal Partition) 32mm size with 300 & 190mm Long wall connection pipes and wall flange complete all as specified & directed. Make : Jaquar Product code ALE-CHR-773ML300x190 or equivalent model in Kohler as approved by GE. |
| 87 | M&L for 5mm thick Mirror frameless of selected quality mounted on walls with suitable number of brackets, size and shape as directed, complete all as specified andas directed.Make - Modiguard or equivalent |
| 88 | S&F Stainless Steel Nahani trap Square grating 5\"\" x 5\"\" with diameter of outlet 75mm. Ruhe 304 Grade Stainless Steel Product Code : 16-0307-15, complete all as specified and directed. |
| 89 | S&F in repairs Wall mixer with provision for Overhead Shower with 115mm long Bend pipe on Upperside, Connecting Legs & Wall Flangecomplete all as specified & directed. Make : Jaquar Product code FUS-29281 or equivalent model in Kohler as approved by GE. |
| 90 | S&F in repairs Overhead Shower 200x200mm Square Shape Single Flow(ABS Body Chrome plated with Gray face plate) with rubit cleaning system complete all as specified & directed. Make : Jaquar Product code OHS-CHR-35497 or equivalent model in Kohler as approved by GE. |
| 91 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing to be provided by Engr-in-charge. |
| 92 | S&F 25mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick with wood grain printed PVC sheet duly fitted into the wall as per specifications and drawing to be provide by Engr-in-charge. |
| 93 | S&F 10-12mm thick rubber flooring tiles of 500x500mm size in any colour at Gym, by using approved quality rubber tiles, stretching resistant, stain resistant grade, complete all as specified and directed.Make:- Ecoflex flooring Pvt Ltd / Topfloor / Asian flooring India Pvt Ltd / Liltoes |
| 94 | Taking down carefully exising unserviceable point wiring of any type (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc)for taking credit and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed. |
| 95 | Taking down carefully existing wooden board, main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out etc of any size, any capacity fromboards and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed. |
| 96 | M & L for Point wiring using approved colour coding as per IS, with multi-stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed FRLS cable 1100 volts gradeISI-694 marked drawn through in and including heavy duty, PVC casing capping including all accessories including with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches,including PVC insulated multi-stranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-(a) One light point controlled by one, one way switch 5 Amps. |
| 97 | (b) One 3/5 pin5 Amp socket outlet point controlled by one switch on same board. |
| 98 | (c) One 3/5 pin5 Amp socket outlet point controlled by one switch on independent board. |
| 99 | (d) One bell point controlled by one, bell switch 5 Amps |
| 100 | All as per item No. 96 above but with stranded copper conductor 4 Sqmm (nominal area), single core, PVC insulated and unsheathed multi-stranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multi-stranded copper conductor 4 Sqmm (nominal area) single coreFRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. |
| 101 | S & F for modular bell push modular 6 Amps single module, complete all as specified and directed. |
| 102 | Suply and fixfor Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and as directed |
| 103 | S & FModular switch one way 6 Amps, 1 module, complete all as specified and directed. |
| 104 | S & F Modular switch one way 16 Amps, 1 module, with neon indicator, complete all as specified and directed. |
| 105 | S & F celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked , complete all as specified and directed. |
| 106 | S & Fmodular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed |
| 107 | S & F Modular socket, 6 Amps, 2/3 pin combination 2 module, complete all as specified and directed. |
| 108 | S & F Modular socket, 6/16Amps, 2/3 pin combination 2 module, complete all as specified and directed. |
| 109 | S & Flamp holder, PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings, complete all as specified and directed. |
| 110 | Supply and fixing LED lights fitting 1x 18/20W, 1100 volt grade, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 111 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 112 | S & F sheet metal enclosure double door, SPN, suitable for distribution boards when MCB to be used having 200 Amp rated bus bar, 8 ways 230 V including recessed grouting in wall with PCC 1:2:4 type B-1 complete all as specified and as directed. |
| 113 | S & F MCB single pole, 6 to 32 Amp, 240 V, ‘C’ Series, 10 KA, 50 Hz, complete all as specified and as directed. |
| 114 | S&F MCB, SPN, 40-63 amp rating 240V, 10KA \"C\" curveand current carrying capacity, IS/IEC 60898-12002, fixed in DBs complete with connection testing and commissioning, complete all as specified and as directed. |
| 115 | M&L for earthing complete with galvanised steel earth plate electrode including necessaryexcavation and earth work in any type of soil with galvanized steelearth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly inground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.50 m below normal ground levelconnected to with and including earth lead of 4 mm dia GI wire up to 7.50m by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR Part-I(2009) connected to main switch board or main control board all as specified and testing on completion with & including provision of earth wire protected by galvanised iron 15 mm dia light grade pipe up 7.50m and watering pipe shall be 20 mm bore medium grade with and including concretepit shall be PCC 1:3:6 type C-1,40 mm thick pre cast cover slab in RCC (1:2:4) type B-1 using 20 mm graded stone aggregate duly reinforced with 8 mm TMT bars @100mm C/C on both sides with suitable cast iron lifting handle, GI earthing wire shall be encased in and including 15mm nominal bore GI \"light grade\" tubing with all fittings from earth plate up to panel / DBs shall beprovided & charcoal / saltfunnel & other fittings etc. complete all as specified and as directed.Note :- (i) Unit rates includes the cost of 7.50 m 4mm dia GI earth wire & GI pipe for protection of GI earth wire for each earthing. |
| 116 | Supply, fixing and testing LED IP 66 roadway luminaire with suitable size bracket high power LED as light source and electronic driver for 35 Watt LED efficacy, 100 lumens / watt CCT 5700K, CRI>70 PF 0.95, IP66, IK 07 SP5KV interval & 10 KV, SPD external, complete all as specified and directed. Make: Cat Part No :LR02-501-XXX-57-G1 of Wipro or equivalent model & cat part in Bajaj / Phillips |
| 117 | S&F Ceiling LED recessed Luminaire 600mmx600mm 35/36 Watt, 220VAC with high efficiency PMMA diffuser soft glare free light complete with driver holders &LED lamp suitable for roof, ceiling including connecting up with driver three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 118 | S&F exhaust fan made out of sturdy engineering plastic complete with louvres shutter, voltage 230V, 50Hz, RPM 1200 copper winding of sweep 250 mm sweep, 230V AC complete all as specified and directed |
| 119 | S & F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 25 Amp, 240 volts, complete all as specified and as directed. |
| 120 | S&F ceiling LED recessed Luminaire 12Watt, 220VAC with high efficiency PMMA diffuser soft glare free light complete with driver holders & LED lamp suitable for roof, ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 121 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid PVC conduit of suitable dia including one run ofPVC insulated 2.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire including dismantling of old unserviceable sub main wiring complete all as specified and as directed. Note:- Two runs of 4.0 sqmm cable, one run of 2.5 sqmm cable and one run of PVC conduit shall be measured as one unit length. |
| 122 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 2.5 Sqmm nominal area and drawing into PVC non metallic rigid PVC conduit of suitable dia including one run ofPVC insulated 2.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire,including dismantling of old unserviceable sub main wiring, complete all as specified and as directed. Note:- Two runs of 2.5 sqmm cable, one run of 2.5 sqmm cable and one run of PVC conduit shall be measured as one unit length. |
| 123 | Excavation in soft / loose soil for post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth arround, in layers n. exc. 25 cm, watering, and removing surplus soil to a distance n. exc. 50m and making good disturbed surfaces, complete all as specified and directed. |
| 124 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed. |
| 125 | Dismantling of battens for tiles shingles etc of any size includingtiling fillets exc 15 cm spacing etc complete all as specified & directed. |
