Grama Panchayat has published Materials Supply For Anganwadi Construction Of Plachikadu, Pallavur. Submission Date for this Tender is 02-01-2024. Building Work Tenders in Palakkad Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supplying variuos materials |
2 | Stone Aggregate(single size) : 40mm nominal size |
3 | Stone Aggregate(single size) : 20mm nominal size |
4 | Coarse sand (Zone lll) |
5 | Portland cement |
6 | Hire charges of concrete Mixer 0.25 to 0.40 cum with Hopper |
7 | Vibrator (Needle type40mm) |
8 | Stone for masonry work |
9 | Wall form panel 1250x500mm |
10 | Corner angle 45x45x5 mm 1.50 m long |
11 | 100 mm channel shoulder 2.5 m long |
12 | Double clip (Bridge clip) |
13 | Single clip |
14 | M.S tube 40 mm dia |
15 | Stone Aggregate (Single size): 10 mm nominal size |
16 | Solid blocks of size 30x20x20cm |
17 | Solid blocks of size 40x20x15cm |
18 | Structural steel such as tees, angles, channels and R.S joists |
19 | Red oxide Zinc chromate primer |
20 | Adjustable telescope prop 3 m (2.02-3.75m) |
21 | Beam clamp 300-380 mm (450-1070 mm) |
22 | Second class kail wood in planks |
23 | Second class kail wood in scantling |
24 | Hollock ballies 125mm diameter |
25 | Safeda ballies 125mm diameter |
26 | Adjustable span ESO+ SI (2.35-3.4) |
27 | Twisted steel/deformed bars |
28 | Fine sand (zone IV) |
29 | Vitrified floor tile 60x60 cm |
30 | Ceramic Glazed Tiles 1st Quality 300x300 mm in all shades and designs of white ,lvory ,grey,Fume Red brown etc… |
31 | Ceramic Glazed Tiles 1st Quality minimum thickness 5 mm in all colours shades and designs exceptburgundy ,bottle green black |
32 | Mild steel tubes electrc resistant or induction buit welded |
33 | Mild steel round bar 12 mm dia and below |
34 | Flats up to 10 mm in thickness |
35 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
36 | Factory made glass reinforced plastic door frame 90x45 mm i/c carrige |
37 | 30 mm thick factorymade glassfiber reinforced plastic panel door shutter i/c carriage |
38 | Powder coated M.S butt hinges 100 mm x58 mmx1.9 mm |
39 | Bright finished or black enameled mild steel screws40mm |
40 | Bright finished or black enameled mild steel screws 20 mm |
41 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm |
42 | Welding by eletric plant |
43 | Mild steel plates |
44 | G.I pipes 40 mm dia |
45 | Mild steel round bar above 12 mm dia |
46 | Stainless steel (Grade -304)hollow section round /square tubes |
47 | Stainless steel bolts /square bar and plates |
48 | Multi surface paint |
49 | Special primer (C.W) |
50 | Synthetic enamel paint in black or chocolate shade |
51 | Black plastic seat (solid) with lid C.P brass hinges and rubber buffers |
52 | Vitreous china pedestral type wate closet |
53 | Flushing Cistern P.VC 10lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
54 | Vitreous china flat back wash basin 630x450mm |
55 | 15 mm C.P brass tap |
56 | C.P brass waste 32 mm |
57 | C.I bracket for wash basin and sinks |
58 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
59 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
60 | Polyethylene water storage tank with cover and suitable locking arrangement |
61 | PVC pipe 15 mm outer dia 10kgf/cm2 |
62 | PVC pipe 20 mm outer dia 10kgf/cm3 |
63 | PVC pipe 32 mm outer dia 10kgf/cm4 |
64 | PVC pipe 40 mm outer dia 10kgf/cm5 |
65 | PVC pipe 63 mm outer dia 6kgf/cm6 |
66 | PVC pipe 110 mm outer dia 6kgf/cm7 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail