Military Engineer Services-MES has published Tender For Spl Repair To Bldg No. T-48 (Opd Block), Provn Of 60 X Security Light With Pole Alongwith Perimeter Of Security Fence And Provn Of Summer And Winter Appliances For Various Units At Rajouri Under Ge 862 Ews. Submission Date for this Tender is 09-02-2024. Building Work Tenders in Udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Jan-2024 | EXTENDEDDATE | Date | 02-02-2024 |
| 2 | 22-Jan-2024 | Revision of BOQ | BOQ | 02-02-2024 |
| 3 | 02-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-02-2024 |
| Sl. No. | Item Description |
| 1 | B&R PORTION:- Dismantling of AC sheet (corrugated, semi corrugated etc) in roof coverings, complete all as specified and directed. |
| 2 | Pre- painted galvatume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 3 | Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter, ridge & similar works fixed with self tapping screws complete all as specified. |
| 4 | Dismantling of timber scantling 40sqcm and over in section, as in any position, complete all as specified. |
| 5 | Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410(Gde E 165), complete, complete all as specified |
| 6 | Preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer, complete all as specified and as directed. |
| 7 | Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified. |
| 9 | 50mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified. |
| 10 | 50mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection laid in slope 1:12, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weightto through out joints of 6mm thicks, complete all as specified. |
| 11 | Vitrified ceramic tiles 10 mm thickdark shade (square/rectangular) area of each tile not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 12 | Vitrified ceramic tiles 10 mm thickdark shade (square/rectangular) area of each tile not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick screed bed in CM (1:4), as in skirting/dados complete all as specified and directed. |
| 13 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 14 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 15 | Glazed ceramic coloured tiles (450x350mm) / (350x250mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 16 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness including cover fillets all as specified & directed. |
| 17 | 4mm thick fibre cement E-board designer pattern (classic) ISI Marked IS-14862-2000 of size 600x600mm as in false ceiling fixed with screws as per manufacturers instructions (Make : everest or equivalent as approved by GE) all sections shall be coated white. The frame shall comprise of GI frame work grid of size as GI Tee of size 38x24x4mm as main runner, 28x24x3mm thick GI Tee as cross runner and GI angle of size 24x24x4mm as the wall perimeter including GI adjustable suspender 4mm wire of required length hange with ceiling with accessories spread at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4mm dia to be fixed with approved rawl plugs, level adjusters and screws etc. The last hanger at the each end of main runner shall not be greater than 450mm from adjuscent wall, flush fitting of 1200mm long cross tee with double stitching to be interlocked between main runners,complete as specified and as directed. |
| 18 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 19 | Brick work with fly ash bricks, straight or curved on plan on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified. |
| 20 | Brick work with fly ash bricks, straight or curved on plan on plan exc 6 m mean radius, in half brick thick wall built in cement mortar 1:6, complete all as specified. |
| 21 | Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed. |
| 22 | Taking down cement plaster of any description on stone or brick walls etc. including racking out joints, hacking for key scrubbing down with water etc.complete all as specified. |
| 23 | 15mm thick rendering in CM 1:6 on brick/stone wall or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified. |
| 24 | 15mm thick rendering in CM 1:4 on brick/stone wall or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified. |
| 25 | Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of distemper oil emulsion (colour as approved ) over and including chalk whiting primer, complete as specified and directed. |
| 26 | Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of weather proof acrylic emulsion over a coat of alkali resistant primer, complete as specified and directed. |
| 27 | Complete removal of existing treatement from wall plasterincluding cornices pilaster etc and applying two coats of distemper oil emulsion(colour as approved ), complete as specified and directed. |
| 28 | Complete removal of existing treatement from wall plaster including cornices pilaster etc and applying two coats of weather proof acrylic emulsion over a coat of approved primer, complete as specified and directed. |
| 29 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm and not exceeding 4 Sqm each, complete all as specified and directed. |
| 30 | Taking down chowkahts or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each, complete all as specified. |
| 31 | Taking down shutters of any description exceeding 1sqm and not exc 2 Sqm each and refixing in same opening with necessary fittings complete all as specified and directed. |
| 32 | Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified. |
| 33 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 34 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed. |
| 35 | Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified. |
| 36 | Steel water tubing 20mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceiling or laid in floors, complete all as specified. |
| 37 | Waste coupling of PTMT 32mm dia(half or full threaded) (Minimum weight -45gms) for 32mm bore dia of discharge pipe to WHB, sink fixed in repairs, complete all as specified. |
| 38 | Bib tap 15 mm bore with flange, cast copper alloy,CP, fancy type. with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified. |
| 39 | Floor mounted one piece EWC white, with P or S trap inclusing fixing boltsand connection to PVC cistern and all connected items of superior quality, complete all as specified and directed. |
| 40 | Hand shower (Health faucet) 15 mmdia chromium plated, inlet lenth 100 mm and wall hook and fixed to angle valve with and including decorative choice flexible pipe complete all as specified and directed. |
| 41 | Vitreous china wash hand basin, white, angle back, size 600x480 mm excluding taps, waste, chain & plug and porcelain stopper but including brass chromium plated waste coupling,MS brackets including cutting for and pinning in ends of brackets or erecting stand etc fixed in repairs, complete all as specified. |
| 42 | PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed in repair, complete all as specified. |
| 43 | PVC flexible waste pipe, 600 to 900mmlong suitable for WHB and urinals including connections, fixed in repairs complete all as specified. |
| 44 | 15mm bore angle valve cast copper alloy chromium plated screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified. |
| 45 | Floor trap of 75mm dia cast iron with grating including jointing to waste pipe fixed in cement mortar type B-1 (1:2:4), fixed in repair complete all as specified. |
| 46 | 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered "Hot" or "Cold" with long shank and fly nuts screwed for iron pipe or for brass ferrule complete, fixed in repair complete all as specified & directed |
| 47 | 600mm x 450mm size bevelled edge mirror with border, selected quality 5mm thick glass mounted on aluminium framemade of channel alround, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repair complete all as specified |
| 48 | Soap dish, chromium plated of size 100mmx100mmx60mm, fixed to wall with plugs with chromium plated screws, fixed in repair complete all as specified |
| 49 | Tubular towel rail 60mm long 20mm dia D type aluminium anodised incl necessary brackets, fixed in repairs, complete all as specified and directed. |
| 50 | Rotational moulded polyethylene water storage tankstriple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR Pt-I,of capacity500 Ltrs, incl dismantling of existing tank, complete all as specified and as directed. |
| 51 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified. |
| 52 | Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, "C" channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) and directed by Engineer-in-Charge. |
| 53 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 54 | Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. with & including 5.5mm thick sheet glass ordinary quality, complete all as specified. |
| 55 | Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., with 5.5mm thick tinted glass & provision of Natural colour 15 micron anodised aluminium grill complete all as specified. Note: Glass and grill shall be measures separately under respective items |
| 56 | Sheet glass ordinary quality, 5.5mm thick, glazing with rubber neoprene packing to aluminium frame in squares exceeding 0.50Sqm in each pane fixed in repairs, complete all as specified. |
| 57 | Aluminium anodized grills 6.3 mm dia decorative type 75 mm mesh size, complete all as specified and directed. |
| 58 | Door closer hydraulically regulated(Aluminium extruded section body) , designation No 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed in repairs,complete all as specified |
| 59 | Plain ACPboard 5 mm thick, fixed in aluminium joinery including cutting, packing, finishing, complete all as specified and directed. |
| 60 | Double action floor spring hydraulically regulatedmade up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made up of mild steel heavy duty fixed in repairs,complete all as specified |
| 61 | Stainless steel sliding door bolt of size 250 to 300 mm, with hasp, staple, 10-12 mm dia decorative type, fixed to wooden/PVC/FRP door shutters with four screws all as approved, complete all as specified and directed. |
| 62 | Stainless steel handles of size110 mm, stove enamelled, bright satin finish or bronze finish, decorative type, fixed to wooden/PVC/FRP door shutter, complete all as specified and directed. |
| 63 | Chromium plated grating suitable for 75/100 mm bore floor trap and fixed with white cement, complete all as specified and directed. |
| 64 | 15mm bore Gun metal, globe or gate valves (ISI Marked), with iron wheel head, screwed both ends for iron pipe, fixed in repairs, complete all as specified. |
| 65 | Vitreous China half stall urinal, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified. |
| 66 | PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in trenches/floors/walls as soil pipe, fixed in repair, complete all as specified and directed. |
| 67 | PVC (SWR) bends any radius 75mm bore fixed, complete all as specified. |
| 68 | PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in trenches/floors as soil pipe, fixed in repair, complete all as specified and directed. |
| 69 | PVC (SWR) bends any radius 110mm bore fixed, with access to door complete all as specified. |
| 70 | PVC (SWR) bends any radius 75 mm bore fixed, with access to door complete all as specified. |
| 71 | Cement concrete (1:2:4) type-B-1 (using 20mm graded stone crushed aggregate) as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, bed block, kneelers, apex stones, bed plates, roof kerbs round or chamfered on edges, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc.including necessary form work complete all as specified and directed by Engineer-in-Charge. |
| 72 | Demolition of reinforced cement concreteas inRoofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified. |
| 73 | RCC nominal mix 1:2:4, type, B-1 (using 12.5mm graded crushed stone aggregate), as in slab supported on walls, columns in floors, roofs, landings, balconies and in shelves, complete all as specified. |
| 74 | TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified. |
| 75 | TMT bars, 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified. |
| 76 | Stainless steel curtain rods 20 mm dia including necessary supporting clamp, SS brackets etc, complete all as specified and directed. |
| 77 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified. |
| 78 | Plain cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) as in surface channels and drains including necessary form work, complete all as specified. |
| 79 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surfaces of concrete complete all as specified |
| 80 | E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed. |
| 81 | Point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cableand one single core 1.5 Sqmm(nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with sunken galvanised pressed steel box of thickness not less than 1.12mm of appropriate sizes copvered with 3mm thick phenolic laminated white sheet cover with all requisiteaccessories such as PVC elbow, Tee, collars, bends etc. for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :- |
| 82 | One light / fan point controlled by one way switch 6 Amp complete all as specified. |
| 83 | One 3 pin socket outlet 6 amp independent board complete all as specified. |
| 84 | One 3 pin socket outlet 6 amp on same board complete all as specified. |
| 85 | Description all as per srl item No 81 here in before but for one 3 pin socket outlet 15 Amps, independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 1.5 Sqmm as in continuous earth wire, complete all as specified. |
| 86 | Point wiring with 4 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cableand one single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with and inckl 3 mm thik plastic laminated top sheet cover incl making good the disturbed surfaces to match with the existing specification complete all as specified and as directed. |
| 87 | Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified. |
| 88 | Switch Socket outlet multipurpose combination 2 in 1,5 pin, 6 Amp flush type universal,complete all as specifed. |
| 89 | Socket 5 pin, 5 amps, 2 in 1, flush type, 230 volts complete all as specifed. |
| 90 | Socket outlet multipurpose combination 2 in 1, 5 pin,16 Amp flush type universal,complete all as specifed. |
| 91 | Ceiling rose, 3 phase PVC/poly carbonate, insulated body, compete all as specified. |
| 92 | Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd, for 1200 / 1400mm sweep, complete all as specified. |
| 93 | Taking down ceiling fans of any type and size after disconnecting from existing ceiling rose to connector and clamp hooks for carrying out repairs incl servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent incl replacement of minor spare parts such as split pin, cater pins, coupling bolts, capacitor holder, terminal adaptor, screws, nuts and washers , ball bearing, gun metal bushes, capacitor, canopy top and bottom, shakle clip assembly incl rewinding of fan motor, painting and refixing the same in position after repair work and re-connecting with thee core cable of required size, complete all as specified |
| 94 | Environment friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head 10 watt 6000 K LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, including taking down the old unserviceable fitting all as directed. |
| 95 | Environment friendly, ultra modern, energy saving, LED Panel Square profile of size 2"X2" with Unique slimmest recess cum surface panel, solution to provide variable cut out size for installation in recess of 36 Wattand including removing old U/S fitting, complete all as specified. |
| 96 | LED Tube light fitting, 1x 20 watts, decorative ultra slim linear LED lighting fixture with co-extruded polycarbonate body, environment friendly, energy efficient ready to use pack complete rewired, premium 20 W LED batten with "Eye Soft" technology & glare free diffuser for perfect application in modern homes and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed. |
| 97 | Supply and fixing in replacement Lamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/angular/pendent fittings including LED lamp 9 watt complete all as specified and directed. |
| 98 | Supply and fixing AC Socket with 20 Amp MCB with Sheet metal Enclosure with IP -66 and shock proof complete all as specified and directed. |
| 99 | Exhaust fan made up of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,1200 RPM, copper winding of sweep 300mm, fixed in repair all as specified and directed. |
| 100 | Taking Down and refixing of air conditioner after and including cleaning and servicing complete all as specified and directed by Engr-in-Charge. |
| 101 | Sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:-MCBs will be measured separately.) |
| 102 | Sheet metal enclosure Vertical TPN distribution board, double door single pole and neutral with IP-66 protection single phase 415 volts 8 way,including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing of MCCB as incomer of capacity 63 Amps and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:-MCCBs will be measured separately.) |
| 103 | MCCB, 63 Amps current carrying capacity, 415V, G Frame type MCCB TP/FPand rupturing capacity 16Acomplete with connection testing and commissioning complete all as specified and directed. |
| 104 | MCB single pole,240 volts any rating, 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 105 | MCB single pole,240 volts any rating, 63 amps, with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed. |
| 106 | MCB single pole and neutral, 240 volts any rating, 40 to 63 amps, with rupturing capacity 10 KA,including providing thimble for out going cablescomplete all as specified and directed. |
| 107 | Submain wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 4 sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & includingPVC casing caping/ non metallic rigid PVC conduit medium gradeand making good the disturbed wall surfaces to match with existing specification all as required at site incl taking down of existing wiring complete all as directed by Engr-in- charge. |
| 108 | M&L in for submain wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 6 sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & includingPVC casing caping/ non metallic rigid PVC conduit medium gradeand making good the disturbed wall surfaces to match with existing specification all as required at site incl taking down of existing wiring complete all as directed by Engr-in- charge. |
| 109 | Supply, lay, connect, test and commissioning of XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area70 Sqmm, 3.5 core includingremoving existing old unserviceable cable,complete all as specified and directed. |
| 110 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc for laying of cable , pipes, shafts, wells,cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in any type of soil, complete all as specified. |
| 111 | Excavation in trenches not exc 1.5 mtr wide andexc1.5 mtr depth for foundation for erection of poles, etc and getting out in any type of soil complete all asspecified and directed. |
| 112 | Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed. |
| 113 | Removal of excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above starting point complete all as specified and directed |
| 114 | Dry sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid. |
| 115 | Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed. |
| 116 | Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 8mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed. |
| 117 | Supply and erecting of true vertical position steel tubular swaged pole, 09 metre long, complete with mild steel base plate 6mm thick of size 300mm x 300mm, B-118 finial taper plug, bolts, nuts, washers and screws, type 410 SP-55 including drilling of holes of required size and nuts for fixing of cross arms, painting with two coats of aluminium paint over a coat of red oxideand two coats of black bituminous paint for portion embedded in concrete, painting five black and white bands at lower portion of pole each of 300 mm height at 300mm spacing complete all as specified and directed. (Note : Excavation, earth work and PCC in foundation of poles, coping etc shall be measured and paid separately under respective items of Sch "A"). |
| 118 | Supply and fixLED street light fitting 70 watts, pressure diecast housing with epoxy power coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses with IP 66complete with all accessories and necessaryfixing arrangementon wall at any height including cable to connect with junction boxof three core 1.0 sqmm copper cable from connector to fitting with PVC pipe andcomplete all as specified and directed. |
| 119 | GI bracket pipe of size 25 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of street light fittings of any type/sizeand the GI bracket pipe shall be fixed on wall/pole, steel/PCCsurfaces by providing suitable MSiron 25x4 mm clamps 2 nos of length as required at site to the bracket pipe and painting to MS clampsand fixing with necessary suitablenuts,bolts & washers andcomplete all as specified and directed. |
| 120 | Supply and fixingFRPlooping box of size 200x140x95 mm with connector andcomprising of MCB SP 6 Amps, ISI marked, 240V complete with and including providingGI clamps, nuts boltsetc suitable for fixing on PCC pole/ wall/steel tubular pole etc and complete all as specified and directed. |
| 121 | Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres belowground level, connected to and including galvanised iron wire of size4 mm dia from earth electrode to test point/equipment or up to 7.5 metreswhichever is less by means of GIbolts, nuts, check nuts and washersall as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,with suitable handle, angle iron made of frame out of angle iron of size 40x40x4 mm,including excavation/earth work in any strata and returning filling, removal of surplus soil and testing for required value completeall as specified and directed. |
| 122 | Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed. |
| 123 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size25 sq mm 4 coreall as specified and directed. |
| 124 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size50 sq mm 3.5 core Complete all as specified & directed |
| 125 | PCC 1:4:8 (nominal mix) type D-2 using 40mm graded crushed stone aggregates, as in foundation filling and mass concrete complete all as specified and directed. |
| 126 | PCC 1:3:6 (nominal mix) type C-2 using 40mm graded crushed stone aggregates, as in foundation filling and mass concrete for poles and stay/installation paths complete all as specified and directed. |
| 127 | PCC 1:2:4 (nominal mix) type B1 using 20mm graded crushed stone aggregate, as in coping of poles and the like complete including weathering, slightly rounded or chamfered angles and throating all as specified and directed. |
| 128 | GI tubes, "light grade", 40 mm bore with and including all fittings laid in trenches/road crossing/floors etc for cable protection, complete all as specified and directed. Note:Excavation and earth work shall be measured and paid for separately. |
| 129 | GI tubes, "light grade", 50mm bore with and including all fittings laid in trenches/road crossing/floors etc for cable protection, complete all as specified and directed. Note:Excavation and earth work shall be measured and paid for separately. |
| 130 | Supply, installation, testing and commissioning of LT panel board suitable for working on 3 phase, 4 wire, 415 volts, AC, 50Hz Outdoor type, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation, factory fabricated made out of 3.2 mm thick CRCA sheet duly powder coated and shall be CPRI approved and as approved by GE. The Panel shall have front and rear opening, locking arrangement, bus bar chamber and switch gear compartment, hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, aluminium bus bar duly covered with heat shrink sleeves colour coded duly fixed on DMC/SMC insulators, aluminium strip connection from bus bar to outgoing MCCBs and copper conductor cable of adequate size for MCBs, housed in a separate bus bar chamber and control wiring adequate size and lengthcontd.. |
| 131 | outgoing MCCBs shall have extended bus bar links and Panel mounted on 50x50x5mm size MS angle iron frame duly painted including PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) in foundation design subject to approval of GE as persite requirement. The minimum depth, height, width of panel is 900x 900x450 mm respectively, minimum clearance from ground level is 450mmcomplete all as specified and directed and comprising of following:- Note:- (i) contractor shall provide CPRI certification of the panel. (ii) All items incorporated in panel shall be ISI marked or as per IS specification . |
| 132 | Electric water heater, storage type steel body with stainless steel inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and directed |
| 133 | GI pipe medium class 15 mm bore fixed to wall/ceiling laid infloor etccomplete all as specified. |
| 134 | 15mm bore Stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, complete all as specified. |
| 135 | Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 136 | Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep Min air delivery 210 CFM with service value minimum 6.00 BEE,five star rated with brushless direct current motor (BLDC) complete with all accessories all as specified and directe. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
