Military Engineer Services-MES has published Tender For Special Repair To Bldg No P-47 Jco Mess And Bldg T-243 (20 X Orsm Barrack) Of Klp-I At Fazilka Mil Stn.. Submission Date for this Tender is 20-01-2024. Building Work Tenders in fazilka Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-01-2024 |
| Sl. No. | Item Description |
| 1 | Taking down chowkatsor frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified and directed by Engineer - in-Charge. |
| 2 | Taking down chowkatswith shutters(without taking off shutters from the frameexceeding 1.50 sqm each but not exceeding 4 sqm) removing to store all as specified and directed by Engineer - in-Charge. |
| 3 | Taking down shutters refixing in same openingbut area exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified. |
| 4 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and removing from site |
| 5 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made |
| 6 | S&Fpowder coated anodized aluminum frame for doors, windows , ventilators with one of more rebates including joining cleat for fixing etc. completed all as specified |
| 7 | S&F powder coated aluminium door shutter ,aluminium section wt 0.55 kg / mtr including necessary joining cleats ,glazing clips, rubber eoprene packing , handles 2 Nos. in each door , hinges , anodised aluminium snap beading screws etc. |
| 8 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 9 | S&F 18mm thick PVC sheet having one side decorative laminated sheet all required brackets SS screws etc. the panel shall be fabricated using adhesive and screws where ever required.all the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification including fitting i.e. magnetic catcher,stainless steel handleapproved by Engineer -in-Charge. |
| 10 | S & F 35mm thick 2ndclass hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified. |
| 11 | S&Fplain framed factory made, paneled shutter 35mm thick made of 2nd class HW (Bonsum/Hollock) of 35 mm thick(two panels)with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces.The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated. |
| 12 | S&F Aluminium handle cast type anodized 125 mm long all as specified and directed by Engineer-in-Charge. |
| 13 | S&F Aluminium handle cast type anodized 150 mm long all as specified and directed by Engineer-in-Charge. |
| 14 | S&F Aluminium anodized barrel tower bolt of extended section and fixed 200 mm long all as specified and directed by Engineer-in-Charge. |
| 15 | S&F Aluminium anodized barrel tower bolt of extended section and fixed 300 mm long all as specified and directed by Engineer-in-Charge. |
| 16 | S&F 100 mm long butt hinges,heavy weightcold rolled mild steel, and fixedall as specified and directed by Engineer-in-Charge. |
| 17 | S&F Aluminium alloy, 300MM long anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 18 | S&F Alum door stopper of any description all as specified and directed by Engineer-in-Charge. |
| 19 | S&F in repair MS 300mm ordinaryrat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&Fpowder coated aluminumventilators shutter side hung type without sash, aluminum section weighing glazed clips, rubber packing anodized aluminum fittings such as peg stays 150 mm long (1 nos)hinges type B-21 100 mm long (2 Nos) suitable handle (1 Nos) complete all as specified. |
| 21 | M & L sheet glass selected quality plain 5.5mm thickness fixed in alum door/window shutter cut to required size and fixed with PVC/Neopane gasket etc.Complete all as as specified and directed.(Aluminium snap beading shall be paid separately) |
| 22 | Dismantling of boarding, any description fixed in any position with nails. |
| 23 | S & F continous (Piano)type hinges mild steel bright finish or lectro galvanised with wide of flaps30mm complete all as spd and directed. |
| 24 | S&F in repairs door closer hydraulically regulated, aluminium (Die cast) body, designation No. 3, universal type suitable for door shutter upto 1000mm in width complete all as specified and as directed. |
| 25 | Taking down alum window shutter of any description and refixing in same opening after necessary easing, minor repairs, adjustment of broken beadingvand rubber packing ,tightening of screws, adjustment of hinges, adjustment of fittings like handle/tower bolt etc inclreplacement of old screws with new as required complete all as specified by engg-in-charge (The item glass,glazing clips & alum section will be measured seperately) |
| 26 | Taking down aluminium door shutter ,Refixing of shutters of any size in same opening incl repairs / replacement of rubber packing,glass,glazing clips & aluminium section etc after tightening of members, adjusting of door closure etc.complete all as specified and directed (The item glass,glazing clips & alum section will be measured seperately) |
| 27 | M & L in repairs sheet glass selected quality plain 5.5 mm thickness fixed in alum door/window shutter cut to required size and fixed with PVC/Neopane gasket etc.Complete all as as specified and directed. |
| 28 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 29 | S & F in 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified and directed by Engineer - in-Charge. |
| 30 | S & F 3 mm thick pin headed sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer - in-Charge. |
| 31 | M&L for Shotcreting 25MM thick in RCC columns, beams and slabs etc in layers with approved design mix (minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characterristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregate of 06 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound /weak concrete material 50mm average thickness from slabs,beams, columns etc with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@ 6sqm/ltr at DFT of 100microns as per specifications and disposal of debries for all lead and lifts complete all as specified and directed by Engineer-in-Charge |
| 32 | S&F for hard drawn steel wire fabric not exceeding 4 Kg / Sqm cut to lengths, bent to shape required and tying with mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement complete all as specified and directed by Engineer-in-Chage. |
| 33 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed. |
| 34 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed. |
| 35 | M & L rendering 15mm thickwater proofing plaster in CM 1:3 on slab / roof admixed including and with Dr. Fixit pidilite LW+@ 200 ml per bag of cement. |
| 36 | M & L cement concrete flooring type B0 1:2:4 using 12.5 mm graded aggregate on roof slab all as specified and directed by Engineer-in-Charge. |
| 37 | Preparation of roof top surfaces, providing and applying UV stable single component smart care damp proof ultra is a fibre reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibres and having SRI of 106 on top of concrete roof surface in three coats including self primer at ratio pf damp proof and water 3:1 and coverage @ 1 Ltr /10 sqm with a thickness of 650micron.Note: 6 Hrs interval between two coats will be maintain& the work will be carried out through company applcator duly got approved from Accepting officer in writing before incorporation and paidonly after receiving of the warrenty certificate from the company. Make : Asian paint or equivalent as approved by GENote : The treatment shall be carried out by authorised applicator approved by GE as per the manufacturer instructions. |
| 38 | M & L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work all as specified and as directed. |
| 39 | M&L green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete inculding screed bed or bedding layer of mortar 20 mm thick CM (1:6)all as directed by Engineer-in-Charge. |
| 40 | M&L18- 20mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and likein cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and moulding the edges half round on exposed sidecomplete inculding screed bed or bedding layer of mortar 20 mm thick CM (1:6)all as directed by Engineer-in-Charge. |
| 41 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 42 | M&L machine cut kota stone slab flooring 18-20mm thick (table rubbed and polished) in single piece in staircase treadover cement screed base laid and jointed with grey cement mixed with pgment to match the shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 20 mm thick CM (1:6)all as directed by Engineer-in-Charge. |
| 43 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etcall as specified.& directed by Engineer -in-charge. |
| 44 | Griding , cleaning,treating, mirror polishing on existing Kota stone/ stone work where ever required to give high gloss finish complete as directed by Engr-in-Charge. |
| 45 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water inculding removal of debarise to distance not exceeding 100Mtr . |
| 46 | M & L 10mm thick rendering in Cement Mortar 1:3 on fair facesof brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge . |
| 47 | M & L rendering 15mm thick on fair facesof brick work or concrete surfacesin CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge . |
| 48 | M & L rendering 15mm thick on fair facesof brick work or concrete surfacesin CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge . |
| 49 | M&L Washed stone grit plaster coloured/pigmented type on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 pigmented stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately). |
| 50 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of woodenattens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge. |
| 51 | M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation ofsurfaces, complete all as specified. |
| 52 | M & L Preparation of newly plastered surfaces by applying two coats of interior grade wall putty and making it smooth with sand paperthen applying two coats of oil bound distemper over one coat of cement primer including all as specifiedand directed by Engineer-in-charge. |
| 53 | M & L Preparation of Old plastered surfaces by removing old treatment with electric hand grinder and applying two coats of interior grade wall putty and making it smooth with sand paperthen applying two coats of oil bound distemper over one coat of cement primerall as specified and directed by Engineer-in-charge. |
| 54 | M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge . |
| 55 | M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge . |
| 56 | M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation ofsurfaces, complete all as specified. |
| 57 | M&L for applying one coat of synthetic enamel paint on old decorated steel surfaces exc 10 cm width or girth including preparation of surfaces , complete all as specified and directed. |
| 58 | M&L preparing surface of wood and woodbased surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat ofprimer all as specified and directed by Engineer - in - Charge. |
| 59 | M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge . |
| 60 | M & L for complete removal of existing treatment with hand electric grinderand preparation of old decorated (plastered or unplastered) of walls and applying two coats of cement base paint complete all as specified. |
| 61 | M & L applying two coat of cement base painton new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in – Charge. |
| 62 | S&F 600mm x 450mm beveled edge mirror of selected quality glass on 6mm thick commercial plywood and fixed wooden plugs with chromium plated brass screw and cup washes fixed in repair. |
| 63 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises. |
| 64 | M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge. |
| 65 | M & L vitrified ceramic light shade coloured tiles with matt finish, 10 mm thick ( square/ rectangular ) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:4)complete all as specified and directed by Engineer - in - Charge. |
| 66 | M&L Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge. |
| 67 | M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shadeover and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 68 | M & L Endura Coolroof tiles 300 x 300 x 10 mm white vitrified water absorption < 0.5% SRI >90 (ASTME 1980, EN673 and En 411) BEPL (Building energy perfoance laboratory ) certified laid over screed bed or bedding layer of mortar 15 mm thick CM (1:4) all as Specified. |
| 69 | M & L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge. |
| 70 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 71 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. |
| 72 | M&L chequred cement concrete tiles gloss finish 30cm X 30cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. complete all as specified and directed. |
| 73 | S&F 25 mm dia drapery curtain road with decoative end knobs complete with brackate and fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 74 | M&L in repairsball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge. |
| 75 | S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed. |
| 76 | Demolitionof cement concrete ( un re-inforced) of any description in roofs, floors(other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified. |
| 77 | M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge. :- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (c)Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d)Apply first coat of two component modified polymer coating on the horizontal and verticle surface(e)Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete as specified.Manufacturer : Make : - Dr.Fixit/Fosroc/STP/Asianpaints. Note: 1. The treatment shall be carried out by approved authorised applicator approved by GE as per manufacturer instructions and as directed by Engineer-in-charge. 2. PCC filling in sunken portion will be measured seperately |
| 78 | M & L PCC (1:5:10)using 40mm graded burnt bricksaggregate as in foundation filling & mass concrete or as in sunkenfloor complete all as specified. |
| 79 | supply only liquid water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 80 | Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge . |
| 81 | S & F 110mm PVC (SWR) pipes andsingle socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 82 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 83 | S&F 110mm PVC(SWR) bends any radius provided with access door complete all as specified and directed. |
| 84 | S&F 75mm PVC(SWR) bends any radius provided with access door complete all as specified and directed. |
| 85 | S&F PVC (SWR)floor trap100/75 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 |
| 86 | S & F 100mm bore stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified and directed by Engineer - in - Charge . |
| 87 | S & F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door |
| 88 | S & F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door |
| 89 | S & F 75mm PVC (SWR) vent cowl |
| 90 | Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store |
| 91 | Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store |
| 92 | Refixing 20 mm old steel tubing and connections in new or old possition ( wall ceiling floors, etc.) |
| 93 | S&F Chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed. Make : Supreme/Vectus or equivalent |
| 94 | Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wallall as specified. |
| 95 | S&Fin repair PVC low level flushingsystem 10 Ltr capacity with flush pipe complete as approved by Eng-in charge. |
| 96 | S&F in repair Viterous China squating pan Orrisa pattern size 580/440mm wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with plastic seat cover. |
| 97 | S&F in repair vitreous china,whitewash hand basin ,pedestal type,flat back size 550x400mm complete all as specified and directed by Engineer-in-Charge. |
| 98 | M&L Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed |
| 99 | S&F plain PVC waste pipe 900mm long 32mm bore waste coupling of sinks, basins, etc complete all as specified and directed |
| 100 | S&F bib taps long body, 15mm bore dia, fancy type, cast copper alloychromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified. |
| 101 | S & F 15mm bore CP Angle cock one waychromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified . |
| 102 | S&F 15mmstop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 103 | S/F in repairs pillar taps 15mm borefancy type chromium plated cast copper alloywith capstan heads scre-wed down high pressure with or without lettered hot" or"cold" with long screwed shanks and fly nuts screwed for iron pipe . ISI marked. |
| 104 | S & F soap dish brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and directed by Engineer - in - Charge. |
| 105 | S & Fbrass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge . |
| 106 | PVC connections 15mm size with PTMT nuts 600mm long all as specified and directed by Engineer-in-Charge. |
| 107 | M & L RCC 1:1½:3, (nominal mix), Type A-1, using 20mm graded aggregates as in chajjas, fins, fascias,shelves , louvers, parapets and railing etc and the like including necessary formworks all as specified and directed by Engineer - in - Charge. |
| 108 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia. |
| 109 | Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided for. |
| 110 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed. |
| 111 | M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge . |
| 112 | S & F in repairs stainless steel plate rack of size 900x775x250mm of 1mm thick stainless steel of 1st Quality all as specified and directed by Engineer-in-Charge. |
| 113 | S&F sink mixer with swinging spout (wall mounted model) chromium plated brass with connection and nut complete all as specified and directed. Make : ESS ESS ,Hindware ,Jaquar or equivalent. |
| 114 | M&L 50mm thick PCC1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, surface finished even smooth without using extra cement. |
| 115 | Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete |
| 116 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; Cooler Stand, railings; framework of water tanks & similar work conforming to Fe 410-0 or Fe 310-0 |
| 117 | S&F in repair steel window 1.25mm thick box type (primer coated) ERW hollow "P" section of size 60mm x 25mm single rebated comprises Glazed skeleton shutter ERW Section and Gauzed skeleton shutter 50mm x 20mm and 1mm thick with two open able leaf consisting two Nos. of sash bars of flat iron 12mm x 3mm complete welded to frame with one vertical mullion of ERW box type "T" section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1, four Nos. for each window including following fittings welded to the frame shutter complete all as specified and directed by Engineer-in-Charge :- (a) Hold fast 150mm long of 12mm x 3mm made to shape - 04 Nos. per window. (b) Handle of "Z" section 20mm x 25mm, 100mm long - 01 No. per leaf. (c) MS tower bolt 150mm long - 02 Nos. per leaf. (d) MS pintol hinges of size 100mm x 14mm - 02 Nos per leaf. (e) "Z" section 20mm x 25mm x 100mm long stopper - Per leaf. Make : M/s Tee Pee Enterprises, M/s Friends Manufacturing Co., Kotkapura Note : Glass and painting shall be measured and paid separately under appropriate items of BOQ. |
| 118 | S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 125 x 60mm all as specified and directed by Engineer - in - Charge . |
| 119 | M&L Cement concrete 1:3:6 type C-1 for filling of pressed steel frame, hold fast blocks etc all as specified . |
| 120 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 121 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 122 | S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed by Engineer - in - Charge. |
| 123 | S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed all as specified and directed by Engineer-in-Charge. |
| 124 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 125 | Dismantling structural steel work including doors, gates but excluding framed truss etc |
| 126 | Erection & fixing only Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 127 | M&L for 4mm thick E board fibre cement designer ceiling board of Everest make embossed texture of size 595x 595 mm fixed with screws to snap grid works including GI frame work channel 0.55mm thick frame work in ceiling complete all as specified and directed |
| 128 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 129 | Refixing Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 130 | M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4)finished even & smooth (without using extra cement) |
| 131 | M&L for Rough cast plaster complete all as specified and directed by Engineer-in-Charge. Note : Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished eaven |
| 132 | M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed. |
| 133 | M&L applying two coats of synthetic enamel paint including preparation of old steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed. |
| 134 | Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge.Note: Rate for making good shall be deemed to be included in above item rate. |
| 135 | Taking down unserviceable main switches and MCB distribution boards single phase complete all as spd |
| 136 | M & L for point wiring complete with 1.5 Sqmm (Nominal area) PVC insulated multustranded fire retardant (low smoke unsheathed and multicore copper conductor cable with colour code ISI marked and including PVC concealed conduict ISI marked and conduit fittings for one light point/fan point/exhaust fan/Bell Point controlled by one switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified (Cost of MS sunken box and bakelite sheet included in the rate). |
| 137 | M & L point wiring with PVC FRLS insulated unsheathed multistranded copper conductor of size 1.5 Sqmm, 1100V grade in Existing concealed conduit,and one run PVC FRLS insulated unsheathed copper conductor of size 1.5 Sqmm as earth continuity wire and connected to common earth dolly using color code as per IS and all as specified withcopper lugs/timbles inserted in existing MS boards/boxes complete heavy duty for housing switches, , regulators, bell push etc, and making good all disturbed work to match the existing for One light / fan point controlled by one waypiano switch 5 Amp. and complete all as specified and directed. |
| 138 | All as per Srl item No. 138 here-in-before but one three pin socket outlet 5 Amps on the independent board complete all as specified. |
| 139 | All as per Srl item No. 138 here-in-before but one three pin socket outlet 5 Amps on the same board complete all as specified. |
| 140 | All as per Srl item No.138 here in before but with 1.5 Sqmm (nominal area) PVC insulated multistranded copper conductor cable unsheathed ISI marked controlled by two way switches complete all as specified. |
| 141 | M&L for point wiring complete with 2.5 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore switch socket combination including PVC insulated 2.5 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified. |
| 142 | S&F switch Piano type single pole one way 5 Amp,230 VAC supply. |
| 143 | S&F socket two in one ,3 Pin 5 Amps 230 VAC supply,. |
| 144 | S&F switch Piano type single pole two way 5 Amp,230 VAC supply. . |
| 145 | S&F switch Piano type single pole one way 15 Amp on laminated sheet top cover complete to all as spd (Sheet top cover incl in point wiring) . |
| 146 | S&Fsocket Pinao type 6 Pin 16 amp,230 VAC. |
| 147 | Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, . |
| 148 | M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed. |
| 149 | S&F of fan regulator step down electronic type heavy duly flush type 230 volts AC single phase fixed on laminated sheet top cover (laminated top cover is included in point wiring) and connecting up complete all as specified and directed. (Laminated sheet top cover and sunken box is included in point wiring). |
| 150 | S &F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SPof capacity16 A |
| 151 | S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 12 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB"s and isolators etc complete all as specified and directed.. |
| 152 | S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps all as specified and directed. |
| 153 | S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps all as specified and directed. |
| 154 | S&F sheet metal enclouser VTPN/HTPN DB having facility to fix MCCB incomer upto 100 Amps and MCB in outgoing , TPN 4 WayDistribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting with bus bar,neutral links, door earthing , IP-43 Protection including making good disturbed surfaces after taking out old unsv DBcomplete all as specified and directed.. |
| 155 | S&F MCCB 4 POLE , 100 Amps 415 Volts of breaking capacity 36 KA (Adustable thermal and adjustable magnetic release setting) complete taking out down ols unsv one and making necessary connections as existing and cleaning the terminals with CTC soluations complete all as spd and dir. |
| 156 | Supply and fixing LED luminaire 600 mm x 600 mm,36 watt, 220 V AC surfacetype with high efficiency PMMA diffuser soft glare free light complete with driver suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.Make :Bajaj/ Havells/Phillips/Wipro as recommended by Engr-Incharge and approved by GE. |
| 157 | M&L sub main wiringof PVC FRLS insulated unsheathed two core 6 sqmm copper multi stranded conductor including one run of single core copper conductor of size 6.0 sqmm as earth wire drawing in concealed PVC conduitcompleteall as specified and directed.(Note : Three length of submain considered as one unit) |
| 158 | M&L for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge Make: Bajaj BIBWP LED 10W WHor equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE. |
| 159 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 160 | S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin. |
| 161 | Supply, install,commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS -CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening size of 3-4 ft as specified |
| 162 | Supply , fixing,testing and commissioning of electrical chimney (90CM)with features of filterless& autoclean technology,oil collector tray,inbuilt light,digital display,noise level 46 dB, 304 Watt motor capacity with copper winding extra installation kit , air suction capacity 1400 cum/h, input voltage range 220-240 volts,50 Hz and fitting in wall as concealed or duct complete all as specified and directed by Engr-in-Charge.Make : BOSCH/HINDWARE/SUNFLAME |
| 163 | Supply and fixing modern style indoor type wooden glass 12 watt wall light suitable for dining hall/room with provision of 12 Watt LED warm white bulb with complete fiiting in walls complete all as spcified and directed by Engr-in-Charge. |
| 164 | Suppy and fixing Exhaust fan metalicbody heavy duty of size450 mm sweep with louver shutter 220V, single phase AC including 1.0sqmm copper flexible cable twiested three core alongwith flelxible PVC condiut from ceiling rose to fitting testing complete all as specified and directed includingcutting holes thruogh cement mortor wall for fixing 300mm sweep exhaust fan grouting the bolts, plastering and making good surface internally and externally wth existing colour.Make:Cromption/Havells/Bajaj |
| 165 | Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GIearthing wire of size 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI light grade pipe upto test point or upto electric equipment, fixing with 02 Nos nuts and bolts. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common saltall around bottom and top. 20 mmbore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type ofsoil, returning filling and disposal of surplus soil to a distance not exceeding 50m,Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat ofred oxide primer, complete all as specified & shown in electrical plate No. 3 ofSSR 2009 (Part-I) including taking out/dismantling old unserviceable earthing system complete all as specified and as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge. |
| 166 | S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB"s and isolators etc complete all as specified and directed.. |
| 167 | S&F of Ceiling fan BLDC type , 1200mm sweepmounted in suitable arrangement for operation on 230 volts, single phase, 50 cycle per second, AC supply with electonic type regulator and connecting accessories BEE 5 Star ratingand connecting up including three core PVC insulated PVC sheated copper conductor flexible cable from ceiling rose to fanfixing in ceiling completeand making the surface good after fixing the fan complete all as specified and directed. MAKE : BAJAJ/HAVELLS/CROMPTON |
| 168 | Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth forpipe linein soft/loose soil,& getting out complete all as specified and directed by Engin-in-Charge. |
| 169 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge |
| 170 | Material and labour for sand cushioning, with dry and clean fine river sand (for under ground cable) 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cablecomplete all as specified and as directed. (Note:- Punned thickness shall be considered for payment purpose) |
| 171 | Supply and laying Best quality, locally available, sub class ‘B’ bricks (Old Size) for cable protection cover, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete allas specified and as directed. |
| 172 | M&L for boring hole across the road/plinth/hard standing by trench less technology method suitable for up to 100 mm bore pipe for 0.4 mpa working pressure for cable passing without damaging Road/plinth/floor complete all as specified and directed by Engr-In-Charge. |
| 173 | Supply and fixing GI tubing light grade of size 50 mm bore, ISI marked, fixed along poles/walls or laid in trenches, under road for cable protection including fittings (elbow, tee, socket etc) including taking out old pipe any size complete all as specified and as directed. (Note:- Excavation and earthwork and MS clamp as required shall be measured and paid separately under respective item of Sch.) |
| 174 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
