Grama Panchayat has published Tender For Construction Of Anganwadi In Elimala Ward. Submission Date for this Tender is 11-01-2024. Building Work Tenders in kuttichal Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Anganwadi Construction in ward 6 |
2 | Stone Aggregate(single size): 40 mm nominal size |
3 | Stone Aggregate(single size):20 mm nominal size |
4 | Coarse sand (zone III) |
5 | Portland Cement |
6 | Twisted steel/deformed bars |
7 | wall form panel 1250x500 mm |
8 | Corner angle 45x45x5 mm 1.50 m long |
9 | 100 mm channel shoulder 2.5 m long |
10 | Double clip (bridge clip) |
11 | Single clip |
12 | M.S. Tube 40 mm dia |
13 | Structural steel such as tees, angles, channels and R.S. joists |
14 | Red oxide Zinc chromate primer |
15 | Adjustable telescopic prop 3 m (2.02-3.75m) |
16 | Beam clamp 300-380 mm (450-1070 mm) |
17 | Adjustable span ESO+SI (2.35-3.40) |
18 | Second class kail wood in planks |
19 | Second class kail wood in scantling |
20 | Safeda ballies 125 mm diameter |
21 | Wall form panel 1250x450xmm |
22 | Corner angle 45x45x5 mm 2.50 long |
23 | Column clamp 450x1070 mm |
24 | Prop 2 m (2-3.5m) |
25 | Stone Aggregate(single size): 10 mm nominal size |
26 | Royalty for good earth |
27 | Solid blocks of size 40x20x20cm |
28 | Solid blocks of size 40x20x15cm |
29 | Mild Steel round bar above 12 mm dia |
30 | Flats up to 10 mm in thickness |
31 | Anjili wood scantls |
32 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
33 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
34 | Bright finished or black enameled mild steel screws 40 mm |
35 | Bright finished or black enameled mild steel screws 20 mm |
36 | Anjili wood planks |
37 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
38 | 50 mmx42 mmx2 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish |
39 | 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
40 | Multi surface paint |
41 | Special primer (C.W) |
42 | 200 mm Aluminium aldrop |
43 | Iron hooks & eyes 100 mm |
44 | Anodised Aluminium tower bolt (barrel type) 200x10 mm |
45 | Chromium plated Brass screws 30 mm |
46 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
47 | Chromium plated Brass screws 25 mm |
48 | Fine sand (zone IV) |
49 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
50 | Plastic emulsion paint |
51 | Acrylic exterior paint |
52 | Exterior primer |
53 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
54 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
55 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
56 | C.I. bracket for wash basin and sinks |
57 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
58 | PTMT - Towel Rail (600 mm) |
59 | Second class teak wood in scantling |
60 | Brass stop-cock 15 mm dia |
61 | Brass full way valve with C.I. wheel (screwed end) 25 mm dia |
62 | PVC pipe 25 mm outer dia. 10kgf cm2 |
63 | PVC pipe 40 mm outer dia. 10kgf/cm2 |
64 | PVC pipe 50 mm outer dia.6kgf/cm2 |
65 | PVC 45 degree Elbow 63 mm dia |
66 | PVC bend 63 mm dia |
67 | PVC vent cowl 63 mm dia |
68 | PVC end cap 63 mm dia |
69 | PVC Elbow 110 mm dia |
70 | PVC Tee 110x110x110mm dia |
71 | PVC vent cowl 110 mm dia |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail