Public Works Department-PWD has published Tender For Construction Of Anganwadi Centre Building At Dedran W.No.3 Tehsil Mandi District Poonch. (Under District Capex Budget Ssy Components 2023-24) (2Nd Call). Submission Date for this Tender is 27-12-2023. Building Work Tenders in surankote Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas( exceeding 30cm in depth, 1.5 m in width as well as 10 sqm on plan ) including disposal of excavated earth, lead up to 50m and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of Soil |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 3 | Providing and laying in position cementconcrete of specified grade including curing but excluding the cost of centring and shuttering . All work up to plinth level with : 1:5:10( 1 cement :5 coarse sand :10 graded stone aggregate 40 mm nominal size ) |
| 4 | Providing and laying in position cementconcrete of specified grade including curing but excluding the cost of centring and shuttering .All work up to plinth level with : 1:3:6 with( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Providing of laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttring, finishing, and reinforcement. all work upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars |
| 10 | Dumping stone including cost of stones. On Horizontal on level. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 13 | Suspended floors, roofs, landings, balconies and acess platforms |
| 14 | Edges of slabs and breaks in floors and walls 5.16.1.1 under 20cm wide. |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal Wood |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First class kail wood |
| 17 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.12 mm thick Marine plywood conforming to IS: 710 |
| 18 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws First class deodar wood |
| 19 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood |
| 20 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete |
| 21 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 22 | Providing and laying ISI marked aluminium butt hingers ISI marked anodoized (inodic coating not less then grade AC 10 as per IS: 1868 transperent and drayed to recquired colour or shade with necessery secrews etc.complete |
| 23 | providing and fixing aluminium sliding door bolts ISI markedanodoized (inodic coating not less then grade AC 10 as per IS: 1868 transperent and drayed to recquired colour or shade with nuts and secrews etc. complete 250*16 mm |
| 24 | providing and fixing aluminium tower bolts ISI markedanodoized (inodic coating not less then grade AC 10 as per IS: 1868 transperent and drayed to recquired colour or shade with necessery secrews etc. complete 150*10 mm |
| 25 | providing and fixing aluminium handles ISI markedanodoized (inodic coating not less then grade AC 10 as per IS: 1868 transperent and drayed to recquired colour or shade with necessery secrews etc. complete 125mm |
| 26 | 100*10mm |
| 27 | providing and fixing aluminium hanging floor door stoper ISI markedanodoized (inodic coating not less then grade AC 10 as per IS: 1868 transperent and drayed to recquired colour or shade with necessery secrews etc. complete twin rubber stopper. |
| 28 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 29 | 6mm cement plaster to ceiling of mix 1:3 (1cement: 3fine sand) |
| 30 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 31 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 32 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 33 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 35 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 36 | Providing and fixing white vitreous china pedestal type water closet (indian type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 37 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 38 | Providing and fixing mediem class G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.(internal work) 20mm dia normal bore |
| 39 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 40 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 41 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
| 42 | Providing and fixing following PVC fitting of approved quality as vectus or princePVC pipe 100mm dia |
| 43 | PVC pipe 65mm dia |
| 44 | FLOOR TRAP 65mm *100 mm dia |
| 45 | Plan band 100 mm |
| 46 | P band 65mm |
| 47 | Door band 65mm |
| 48 | Providing and fixing following CP/PVC/brass fixture Fitting ofstandard manufecture 15mm CPbib cock (long nose) |
| 49 | Supplying and fixing CP soap dish |
| 50 | Supply and fixing CP wast cuppling |
| 51 | supply and fixing of grating withlock |
| 52 | supply and fixing angel valve |
| 53 | supply and fixing CP 15mm nipple |
| 54 | supply and fixing Cp 25mm nipple |
| 55 | supply and fixing 15mm PVC connection 600mm long |
| 56 | supply and fixing waste pipe |
| 57 | supply and fixing 40mm brass ball valve with polythine flote |
| 58 | supply and fixing 15mm GI union |
| 59 | supply and fixing 15/20mmfull thread GI (tanky nipple) |
| 60 | supply and fixing 25/20mm brass ball vale |
| 61 | Carriage of material by M.T inclloading/unloading& stacking complete. Sand/Bajree average distance of 28km by MT and 500 mtr by HL |
| 62 | Sand Average distance of 225km by MT |
| 63 | Bricks average distance of 225km by MT |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
