|
| 1 | Dismantling & removing doors windows & ventilaters including removal of frames hinges fastening and stacking the materials for reuse and removing the debris with all lead and lift as per direction of the Engineer-in-charge. |
| 2 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep & removing the debris with all lead and lift as per direction of the Engineer-in-charge |
| 3 | 12mm thickcement plastering in C.M (1:6) for brick masonry work including cost ,carriage,royality & taxes of all materials as per direction of the Engineer-in-charge |
| 4 | Finishing wall surface of walls with Acrylic wall puttyof approved make and finished smooth and even surface to receive painting including cost ,carriage,royality & taxes of all materials as per direction of the Engineer-in-charge |
| 5 | Distempering two coats to wall surface with approvedshadeto give an even surface over a coat of primer.including cost of all materials , labour T&P& taxes etc. all complete,as per direction of the Engineer-in-charge. |
| 6 | Wall painting 2 coats with weather coat of approved shade on wall surfaceto give an even shade including cost of brushes and putty including with all cost,carriage,royalty & taxes of all materials complete, as per direction of the Engineer-in-charge. |
| 7 | Painting two coats with approved paint with all cost,carriage,royalty & taxes of all materials complete ,as per direction of the Engineer-in-charge. |
| 8 | Supplying, fitting & fixing of tilesin floor & dados of approved make laid on 12 mm thick cement mortar (1:3) and filling joints with slurry with all cost,carriage,royalty & taxes of all materials complete, as per direction of the Engineer-in-charge. |
| 9 | Supplying, fitting & fixing M.S doors & windows including fixing to walls with C.C.(1:2:4) with all cost,carriage,royalty & taxes of all materials complete , as per direction of the Engineer-in-charge. |
| 10 | Door |
| 11 | Window |
| 12 | Supplying all materials, labour, T&P and Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of Engineer-in-charge |
| 13 | Supplying all materials, labour, T&P and Fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of Engineer-in-charge |
| 14 | Supplying all materials, labour, T&P and Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately) as per specification ,contrator profit &labour cess as per specification and direction of Engineer-in-charge. |
| 15 | Supplying all materials, labour, T&P and Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever requiredetc all complete as per specification and direction of Engineer-in-charge |
