Public Works Department-PWD has published Tender For Repair And Maintenance Work In Adj No. 1 Court Building At Hindaun City. Submission Date for this Tender is 28-12-2023. Building Work Tenders in hindaun Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Old work (one or more coats) including scrapping surface andnecessaryrepairs. Colour Change |
| 2 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shadetogive an even shade including all scaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : one or more coats on old work |
| 4 | Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) |
| 5 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ). |
| 6 | Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 20mm thick . |
| 7 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 8 | Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged : Panel by Wire Gauge 14 mesh x 24 gauge |
| 9 | Providing and applyingMelamine polish on teak wood work of approved brand and manufacture to give an even shade with twoor more coats by compressor including sand papering,wood filler coat etc complete in all respect: Old Surface |
| 10 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 11 | P & F High Level Flushing Cistern of 10 Litres capacity of approved make including C.I. brackets duly painted, china & pull and 32 mm dia G.I. concealed flush pipe with M.S. clamps, 20 mm dia G.I. overflow pipe up to 185 Cm. Long, brass ball cock (IS:1703 Mark) with PVC ball and internal fittings and mosquito proof coupling, complete including cutting and making good the wall. White PVC (IS: 7231 Make) |
| 12 | P&F towel rail or ring of approved quality /make: C.P. brass towel rail elbow type with concealed screws size 600mm (heavy duty) |
| 13 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 510 mm x 400 mm |
| 14 | P&F Bath shower of approved quality/ make . C.P. brass of heavy & superior quality 150mm. |
| 15 | P&F Soap dish or tray of approved quality/ make. (IS : 2556 Marked) C.P. brass heavy and superior quality |
| 16 | P&F Jet spray for water closet with C.P. copper tube flange of approved make |
| 17 | P & F Pillar Cocks (IS:8934 Mark) of superior quality and approved make :C.P. Pillar cock fancy type, 15 mm nominal bore. |
| 18 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : C.P. Brass bib cock, 15 mm nominal bore. |
| 19 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked). |
| 20 | P & F 15 mm. Dia Connection pipe of approved quality/make: PVC pipe with C.P. Brass nuts up to length 300 mm. |
| 21 | P & F Flush Cock/Flush Valve (IS:9758 Mark) or WC of approved quality make : C.P. brass push type 15 mm nominal bore. |
| 22 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked including top cover of6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plate MS 20 mm dia curtain rod with nickel plated bracket including fixing with 25x3 mm MS flat10 cm long all complete |
| 23 | Grading roof for water proofing treatment withwater proffing compound . Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 24 | Renewing glass panes, with putty and nails wherever necessary:Float glass panes of thickness 5.0 mm |
| 25 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours. Second layer of slurryof cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints ,corners,junction with polymer mixed slurry. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
