Military Engineer Services-MES has published Tender For Repair To Flooring, Tilling, Roofing, Ceiling, Plastering, Joinery, Plumbing, Sanitary Fittings And Certain Misc Works In Certain Bldgs At Khunmoh Grn Under Ge 861 Ews.. Submission Date for this Tender is 18-01-2024. Shed Construction Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on any surfaces etc, including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 2 | Demolition of brick work or stone or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 3 | Demolition of cement concrete (un-reinforced) as in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed. |
| 4 | Dismantiling of floor, hearth or wall tiling including cement mortar bedding (not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 5 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, reinforcement cut as required to facilitate demolition, complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings, area not exc 1.50 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed. |
| 7 | Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings, area exc 1.50 Sqm but not exc 4.0 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed. |
| 8 | Taking down shutters of any description, area not exc 1.0 Sqm each, complete all as specified and directed. |
| 9 | Taking down shutters of any description, area exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed. |
| 10 | M&L for brick work with sub class "B" bricks, old size, straight or curved on plan exceeding 6 Mtr mean radius, built in cement mortar 1:4, complete all as specified and directed. |
| 11 | All as per Srl item No. 10.00 above but except bricks. |
| 12 | M&L for flush pointing to random rubble stone masonry, uncoursed or brought upto courses in cement mortar 1:3, complete all as specified and directed. |
| 13 | M&L for 15mm thick rendering in cement mortar 1:6 on other than fair faces of brick wall or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 14 | M&L for 10mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 15 | M&L for 5mm thick rendering in cement mortar 1:3 on fair faces of brick wall or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 16 | M&L for reinforced cement concrete 1:2:4 (Nominal mix), type B-1 (using 20mm graded crushed stone aggregate) as beams, cantilevers, bressummers, lintels over 1.5 mtr span, complete all as specified and directed. |
| 17 | Formwork to rough finished surfaces of concrete of sides and soffits of suspended slabs such as roof slabs, floor slabs, landings, beams and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 18 | S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 19 | M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in covers of manholes, septic tanks, drain etc. including necessary fornwork, setting in cement mortar 1:4,complete all as specified and directed. |
| 20 | M&L for 25mm thick plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling course of floor, floors etc., finshed the surface even and smooth, complete all as specified and directed. |
| 21 | M&L for 10mm thick vitrified ceramic dark shade coloured tiles, polished, area of each tile not exc 0.36 Sqm, as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 22 | All as per Srl item No. 21.00 above but on vertical surfaces such as skirting, dados etc and fixed over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed. |
| 23 | M&L for non skid ceramic coloured tiles 7 to 8mm thick, 1st quality, joint free, size of each tile 400x400mm, as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 24 | M&L for non skid ceramic coloured tiles 7 to 8mm thick, 1st quality, joint free, size of each tile 300x300mm, as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 25 | M&L for glazed ceramic coloured tiles 7mm thick, 1st quality, joint free, size of each tile 300x200mm, as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 26 | M&L for coloured glazed ceramic joint free tiles of size 300x250x7mm thick or 450x350x7mm thick as on verticle surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 15mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed. |
| 27 | Dismantling stone slabs and tiles of any description or thickness as in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 28 | M&L for machine cut kota stone slab flooring 18-20mm thick, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floor, complete all as specified and directed. |
| 29 | All as per Srl item No. 28.00 above but on vertical surfaces such as skirting, dados, steps, pillars etc and fixed over and including 15mm thick rendering in cement mortar 1:4 to receive stone slab, complete all as specified and directed. |
| 30 | M&L for 20mm thick granite (of any type) tiles/ slabs, mahine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 31 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, floors, pavings etc., finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 32 | M&L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, set, jointed and pointedwith grey cement and pigment, as in floors, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 33 | M&L for 2nd class hardwood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 34 | S&F 35mm thick 2nd class hard wood plain framed, panelled shutters (any number of panels) with panel of timber flat on both sides (feather edged) or12mm thick BWP of veneered particle board medium density wood commercial face veneers, fixed to chowkat at site, complete all as specified and directed. |
| 35 | S&F 35mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc. (internal sash bar), edges of framing plain, chamfered, rounded fitted with mitred beads for securing glass etc., size of members as specified in SSR Part-I Section 8 Clause 8.24 (a), fixed to chowkat at site, complete all as specified and directed. |
| 36 | S&F 30mm thick 2nd class hard wood glazed and skelton shutters for window or venilators, open rebated and prepared to receive glass, gauge etc., divided into square with plain chamfered or rounded, mitred and rebated sash bars any numbers, provided with stiles and rails as specified in SSR Part-I Section 8 Clause 8.24 (b), fixed to chowkat at site, complete all as specified and directed. |
| 37 | S&F PVC door frame of size 50mm x 47mm, made of 5mm single side prelam colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS square tube, fixed in opening, complete all as specified and directed. |
| 38 | S&F factory made solid panel PVC door shutter 28-30mm thick (style) consisiting of frame made out ofMS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixing in the frame at the site, complete all as specified and directed. |
| 39 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections, complete all as specified and directed. |
| 40 | S&F aluminium anodised barrel tower bolts of extruded section 200mm long, complete all as specified and directed. |
| 41 | S&F in replacement aluminium anodised barrel tower bolts of extruded section 200mm long, complete all as specified and directed. |
| 42 | S&F aluminium anodised barrel tower bolts of extruded section 150mm long, complete all as specified and directed. |
| 43 | S&F in replacement aluminium anodised barrel tower bolts of extruded section 150mm long, complete all as specified and directed. |
| 44 | S&F 150mm size, extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed. |
| 45 | S&F in replacement 150mm size, extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed. |
| 46 | S&F 100mm size, extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed. |
| 47 | S&F in replacement 100mm size, extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed. |
| 48 | S&F 100mm size butt hinge, medium weight, cold rolled, mild steel, ISI marked, complete all as specified and directed. |
| 49 | S&F in replacement 100mm size butt hinge, medium weight, cold rolled, mild steel, ISI marked, complete all as specified and directed. |
| 50 | S&F 75mm size butt hinge, medium weight, cold rolled, mild steel, ISI marked, complete all as specified and directed. |
| 51 | S&F in replacement 75mm size butt hinge, medium weight, cold rolled, mild steel, ISI marked, complete all as specified and directed. |
| 52 | S&F 300mm size brass helical door springs including roller and roller plate, complete all as specified and directed. |
| 53 | S&F in replacement 300mm size brass helical door springs including roller and roller plate, complete all as specified and directed. |
| 54 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, complete all as specified and directed. |
| 55 | S&F in replacement floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, complete all as specified and directed. |
| 56 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 57 | S&F 4.0mm thick plain sheet glass, selected quality and glazing with oil putty or beads / glazing pins as required in square not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 58 | S&F 4.0mm thick figured glass, pin headed type and glazing with oil putty or beads / glazing pins as required in square not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 59 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm, fixed with tinned tacks or galvanised wire staples, complete all as specified and directed. |
| 60 | S&F in repair/ replacement galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm, fixed with tinned tacks or galvanised wire staples, complete all as specified and directed. |
| 61 | Dismantling water tank of capacity 500 ltrs and removing from site, complete all as specified and directed. |
| 62 | S&F 500 ltrs capacity PVC rotational moulded polyethylene water storage tank, tripple layered (cylindrical vertical with closed top), hoisted and fixed in position, complete all as specified and directed. |
| 63 | S&F in replacement vitreous china squatting pan, ‘Orissa pattern" of size size 580x440mm, white with integral foot rests (excluding flushing cistern and flush pipe) and including connection to flush pipe to sqatt pattern and provision of cement concrete and making good to disturbed floor, complete all as specified and directed. |
| 64 | S&F in replacement vitreous china bowl urinal, flat back of size 465mm x 355mm x 265mm, white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed. |
| 65 | S&F grating doom 125mm dia with waste hole of PTMT (Minimum weight 40gms), complete all as specified and directed. |
| 66 | S&F in replacement 10 Litres capacity PVC valveless syphonic action flushing cistern low level, white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern, complete all as specified and directed. |
| 67 | S&F in replacement vitreous china wash hand basin of size 550x400mm, white, flat back, fixed with and including brackets and cutting for and pinning in ends of brackets and including 32mm dia CP waste coupling, PVC waste pipe and 15mm bore CP pillar tap, complete all as specifed and directed. |
| 68 | S&F in replacement 15mm dia PVC connection pipe, 600mm long with PTMT nuts of superior quality, complete all as specified and directed. |
| 69 | S&F in replacement 15mm dia PVC connection pipe, 450mm long with PTMT nuts of superior quality, complete all as specified and directed. |
| 70 | S&F in replacement swivel shower of PTMT of any colour for fixing with 15mm bore pipe with shower arm 15mm dia 195mm long with bend of 45 degree with flange of PTMT, complete all as specified and directed. |
| 71 | S&F 100mm bore cast iron sanitary connection socket to fit WC outlet, complete all as specified and directed. |
| 72 | S&F in replacement 75mm bore cast iron soil, waste and vent spun pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed. |
| 73 | S&F in replacement 100mm bore cast iron soil, waste and vent spun pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed. |
| 74 | S&F in replacement 75mm dia cast iron floor trap, with grating including jointing to waste pipe, fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed. |
| 75 | S&F in replacement 75mm dia cast iron Nahani trap including jointing to waste pipe, fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed. |
| 76 | S&F in replacement 75mm bore cast iron bend (any radius), diminishing pieces or tapers, complete all as specified and directed. |
| 77 | S&F in replacement 100mm bore cast iron vent cowl, complete all as specified and directed. |
| 78 | S&F in replacement of 15mm dia bib tap, fancy type, cast copper alloy with chromium plated crutch or butterfly handle, screwed down, scewed for iron pipes or for brass ferrule, complete all as specified and directed. |
| 79 | S&F in replacement 15mm dia stop valve/ angle valve, chromium plated, fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, complete all as specified and directed. |
| 80 | S&F in replacement 15mm dia stop valve/ angle valve, chromium plated, fancy type with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, complete all as specified and directed. |
| 81 | S&F bevelled edged looking mirror of size 600x450mm with selected quality glass, mounted on 6mm thick PVC sheet and 3mm thick PVC moulded frame around the glass, fitted with chromium plated brass screws and cup washers including provision of hanging hooks and sheet glass shelf assembly consisting of 5.5mm thick, 12cm wide with chromium plated brackets guard and railing 60cm long, complete all as specified and directed. |
| 82 | Taking up or down 15mm bore steel water tubing and connection including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 83 | Taking up or down 20mm bore steel water tubing and connection including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 84 | M&L for 15mm bore GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors etc., complete all as specified and directed. |
| 85 | M&L for 20mm bore GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors etc., complete all as specified and directed. |
| 86 | Fixing only 15mm bore GI tubing of any grade and fixed complete to walls and ceiling or laid in floors etc., complete all as specified and directed. |
| 87 | Fixing only 20mm bore GI tubing of any grade and fixed complete to walls and ceiling or laid in floors etc., complete all as specified and directed. |
| 88 | S&F in replacement tubular towel rail, 20mm dia, "D" type, 60cm long between flanges, complete all as specified and directed. |
| 89 | S&F in replacement vitreous china wash down water closet pan (pedestal pattern) with plastic water closet seat cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging divice (excluding flusing cistern and flush pipe) and including "P" or "S" trap, complete all as specified and directed. |
| 90 | S&F in replacement brass CP mixer, fancy type, chromium plated for mixing hot and cold water, screwed down, high pressure with long screwed shank and fly nut, for iron pipe or union of 15mm bore, complete all as specified and directed. |
| 91 | S&F in replacement health faucet, CP brass hand shower 15mm bore and 1500mm long flexible tube and CP wall hook including making connection and fixed in position, complete all as specified and directed. |
| 92 | S&F in replacement 15mm dia fancy type pillar tap,cast copper alloy with crutch or butterfly handle, chromium plated, scewed down for iron pipe, complete all as specified and directed. |
| 93 | S&F in replacement bib tap of PTMT (minimum weight 90 Gram) of any colour, high pressure, screwed for iron pipe 15mm bore and fixed, complete all as specified and directed. |
| 94 | S&F in replacement gun metal, globe or gate valve with iron wheel head, screwed both ends for 20mm bore iron pipe, complete all as specified and directed. |
| 95 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed on wall with MS suitable clamps or laid in floor, complete all as specified and directed. |
| 96 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed on wall with MS suitable clamps or laid in floor, complete all as specified and directed. |
| 97 | S&F 75mm bore PVC (SWR) bends of any radius,complete all as specified and directed. |
| 98 | S&F 110mm bore PVC (SWR) bends of any radius,complete all as specified and directed. |
| 99 | S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 100 | S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 101 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/blankets, any thickness, including cover fillets and snap grip frame etc., complete all as specified and directed. |
| 102 | S&F anodised aluminium snap grid of size 605x605mm as in frame work for false ceiling including straining with 4mm dia GI wire, complete all as specified and directed. |
| 103 | S&F 10mm thick PVC insulation panels with EPS stuck to 1.0mm thick plain PVC sheet suitably placed in false ceiling grid made of aluminium/ GI/ MS, complete all as per specification and directed. |
| 104 | S&F solid PVC wall paneling, decorative type, consisting of 5mm thick plain colour PVC prelaminated sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed. |
| 105 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame, complete all as specified and directed. |
| 106 | S&F 9mm thick veneered decorative plywood, Grade 1 (with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work on wall or ceiling, complete all as specified and directed. |
| 107 | M&L for 2nd class hard wood weather boarding, clean sawn, plain, 20mm thick or feather edged, 15mm to 20mm thick and fixed with 30mm laps including taking down old boardings, complete all as specified and directed. |
| 108 | M&L for second class hard wood, clean sawn, fixed as in scantling or framed work in any position, complete all as specified and directed. |
| 109 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 110 | S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof coverings, cladding to walls etc, fixed with self tapping screws, complete all as specified and directed. |
| 111 | S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof coverings, ridges, hips, cladding to walls, fixed with self tapping screws, complete all as specifed and directed. |
| 112 | S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers as in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed. |
| 113 | S&F 0.63mm thick plain, galvanised, mild steel sheeting as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specifed and directed. |
| 114 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 115 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including 3mm thick wall care putty, complete all as specified and directed. |
| 116 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 117 | M&L for preparation of old plastered surfaces of walls including removing of existing treatment with steel wire brush, scraping down and applying two coats of cement base paint, complete all as specified and directed. |
| 118 | M&L for preparation of old plastered surfaces of walls including removing of existing treatment and applying two coats of oil bound distemper over and including 3mm thick wall care putty, complete all as specified and directed. |
| 119 | M&L for preparation of old plastered surfaces of ceiling including removing of existing treatment and applying two coats of white wash, complete all as specified and directed. |
| 120 | M&L for preparation of new wooden surfaces or articles of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 121 | M&L for preparation of new CGI sheets or steel/ iron surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 122 | M&L for preparation of old wooden surfaces or articles of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 123 | M&L for preparation of old CGI sheets or steel/ iron surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 124 | Supply & Insert 3mm thick 38mm wide glass dividing strips as in floor, complete all as specified and directed. |
| 125 | M&L for 100mm thick plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in floor, sub base etc., laid in alternate bays, joints filled with mastic filling as directed including necessary formwork, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 126 | M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in alternate bays not exc 2.0 Sqm each, 12mm wide and 5cm deep joints shall be formed between the ways and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen of grade VG-10 and two parts of heated coarse sand (by volume), finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 127 | S&F in replacement ball valve, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm iron pipe and fixed, minimum weight 210 gms, complete all as specified and directed. |
| 128 | S&F in replacement 25mm dia harrison / curtain rail/rod, mild steel, chromium plated, decorative type with 02 Nos wood finished side brackets/ fenals and stops, rollers etc. as required for each curtain rod, complete all as specified and directed. |
| 129 | Notes :- An amount of Rs. 51,141.00 on account of Credit Schedule for Schedule "A" Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
