Military Engineer Services-MES has published Tender For Repair To Flooring, Tilling, Roofing, Ceiling And Certain Misc Work In Certain Bldgs In Depot Area Of 21 Fad At Khundru Grn Under Ge 861 Ews.. Submission Date for this Tender is 25-01-2024. Shed Construction Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Dec-2023 | Amendment to BOQ and Tender Documents | BOQ | 18-01-2024 |
| 2 | 18-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-01-2024 |
| Sl. No. | Item Description |
| 1 | Dismantiling of floor, hearth or wall tiling including cement mortar bedding (not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 2 | Dismantling stone slabs and tiles of any description or thickness as in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 3 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/blankets, any thickness, including cover fillets and snap grip frame etc., complete all as specified and directed. |
| 4 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 5 | Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings, area exc 1.50 Sqm but not exc 4.0 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings, area not exc 1.50 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed. |
| 7 | Taking down shutters of any description, area exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed. |
| 8 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 9 | Demolition of cement concrete (un-reinforced) as in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed. |
| 10 | Dismantling timber scantlings 40 Sqcm and over in section, in any position, complete all as specified and directed. |
| 11 | Demolition of brickwork or stone or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 12 | Taking down cement plaster on any surfaces etc, including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 13 | M&L for non skid ceramic coloured tiles 7 to 8mm thick, 1st quality (square/ rectangular), area of each exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 14 | M&L for non skid ceramic coloured tiles 7 to 8mm thick, 1st quality (square/ rectangular), area of each exc 0.11 Sqm but not exc 0.18 Sqm, as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 15 | All as per Srl item No. 14.00 above but on vertical surfaces such as skirting, dados etc and fixed over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed. |
| 16 | M&L for non skid ceramic coloured tiles 7 to 8mm thick, 1st quality (square/ rectangular), area of each exc 0.18 Sqm but not exc 0.36 Sqm, as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 17 | All as per Srl item No. 16.00 above but on vertical surfaces such as skirting, dados etc and fixed over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed. |
| 18 | M&L for coloured glazed ceramic tiles of size 300x450x7mm thick as on verticle surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed. |
| 19 | M&L for machine cut kota stone slab flooring 20-25mm thick, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floor, complete all as specified and directed. |
| 20 | All as per Srl item No. 19.00 above but on vertical surfaces such as skirting, dados, steps, pillars etc and fixed over and including 10mm thick rendering in cement mortar 1:4 to receive stone slab, complete all as specified and directed. |
| 21 | S&F 605x605mm in size GI frame work for seamless ceiling, snap grid frame work for false ceiling with all necessary angle and tee arrangement with and inclusive fixing cleats screws, complete all as specified and directed. |
| 22 | S&F hangers 6mm dia GI (upto 1200mm length) adjusting level, fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete all as specified and directed. |
| 23 | S&F 8mm thick false ceiling (non asbestos fibre cement building boards), fixed or inserted in ceiling flat or sloping to GI / aluminium framework with screws, complete all as specified and directed. |
| 24 | S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with "L" or "J" type or cranked hooks & bolts and washers as in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed. |
| 25 | All as per Srl item No. 24.00 above but except sheets. |
| 26 | S&F 0.80mm thick plain, galvanised, mild steel sheeting as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed. |
| 27 | S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof coverings, cladding to walls etc, fixed with self tapping screws, complete all as specified and directed. |
| 28 | S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof coverings, ridges, hips, cladding to walls, fixed with self tapping screws, complete all as specifed and directed. |
| 29 | M&L for 2nd class softwood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 30 | S&F 35mm thick 2nd class soft wood plain framed, panelled shutters (any number of panels) with panel of timber flat on both sides (feather edged) or12mm thick BWP of veneered particle board medium density wood commercial face veneers, fixed to chowkat at site, complete all as specified and directed. |
| 31 | S&F 30mm thick 2nd class soft wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bar), edges of framing plain, chamfered, rounded fitted with mitred beads for securing glass etc., size of members as specified in SSR Part-I Section 8 Clause 8.24 (a), fixed to chowkat at site, complete all as specified and directed. |
| 32 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm, fixed with tinned tacks or galvanised wire staples, complete all as specified and directed. |
| 33 | S&F PVC door frame of size 50mm x 47mm, made of 5mm single side prelam colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS square tube, fixed in opening, complete all as specified and directed. |
| 34 | S&F factory made solid panel PVC door shutter 28-30mm thick (style) consisiting of frame made out ofMS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixing in the frame at the site, complete all as specified and directed. |
| 35 | S&F 3.0mm thick plain sheet glass, selected quality and glazing with oil putty or beads / glazing pins as required in square not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 36 | S&F 3.0mm thick plain sheet glass, selected quality and glazing with oil putty or beads / glazing pins as required in square exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 37 | M&L for 50mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection / path, laid to a slope of 1 in 24 in alternate panels not exc 1.20 Sqm each, 12mm wide and 5cm deep joints shall be formed between the ways and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen of grade VG-10 and two parts of heated coarse sand (by volume), finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 38 | M&L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, set, jointed and pointedwith grey cement and pigment, as in floors, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. |
| 39 | M&L for 60mm thick machine pressed precast concrete interlocking paver block of any shape and size, confirming to IS:15658-2006, M-35 Grade, set, jointed and pointed with grey cement and pigment, complete all as specified and directed. |
| 40 | M&L for sand filling under floors or in foundations or under paver block including watering and consolidation, complete all as specified and directed. |
| 41 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, floors, pavings etc., finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 42 | M&L for brick work with sub class "B" bricks, old size, straight or curved on plan exceeding 6 Mtr mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 43 | M&L for cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in kerbs or mud stops, copings, side of interlocking tiles and the like including weathering, slightly rounded or chamfered angles/ edges and throating including necessary formwork, complete all as specified and directed. |
| 44 | S&F in replacement vitreous china wash hand basin of size 550x400mm, white, flat back, fixed with and including brackets and cutting for and pinning in ends of brackets and including 32mm dia CP waste coupling/ fitting but excluding taps, complete all as specifed and directed. |
| 45 | M&L for second class soft wood, clean sawn, fixed as in scantling or framed work in any position, complete all as specified and directed. |
| 46 | All as per Srl item No. 45.00 above but except timber. |
| 47 | S&F bevelled edged looking mirror of size 600x450mm, 2mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 48 | S&F in replacement cast iron or mild steel hat and coat hooks, solid body, 175mm to 250mm in size, complete all as specified and directed. |
| 49 | S&F in replacement 500 ltrs capacity PVC rotational moulded polyethylene water storage tank, tripple layered (cylindrical vertical with closed top), hoisted and fixed in position including ball valve, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for 20mm bore iron pipe and fixed, minimum weight 210gms, complete all as specified and directed. |
| 50 | M&L for preparation of new CGI / PGI sheets of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over a coating of mordant solution including washing the surface, complete all as specified and directed. Note :- Painting / work shall be carried upto 10 mtr height. |
| 51 | M&L for preparation of old CGI / PGI sheets or steel/ iron surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. Note :- Painting / work shall be carried upto 10 mtr height. |
| 52 | Dismantling boarding of any description, fixed in any position with nails, complete all as specified and directed. |
| 53 | S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed. |
| 54 | S&F 250mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed. |
| 55 | S&F 150mm long mild steel barrel tower bolts, stove enamelled black with bright bolt, complete all as specified and directed. |
| 56 | S&F 150mm long mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed. |
| 57 | S&F 100mm long butt hinge, medium weight, cold rolled, mild steel, complete all as specified and directed. |
| 58 | S&F 100mm long mild steel barrel tower bolts, stove enamelled black with bright bolt, complete all as specified and directed. |
| 59 | S&F 100mm long mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed. |
| 60 | M&L for preparation of new wooden surfaces or articles of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 61 | M&L for 10mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 62 | M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 63 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 64 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer, complete all as specified and directed. |
| 65 | M&L for preparation of old plastered or unplastered surfaces of walls with brooming down or steel wire brushing, scraping down smoke soots, moulds moss, efforescentt salt, trading oil and greasy spots and applying one coat of oil bound distemper, white or tinted, complete all as specified and directed. |
| 66 | M&L for preparation of old plastered or unplastered surfaces of walls with brooming down or steel wire brushing, scraping down smoke soots, moulds moss, efforescentt salt, trading oil and greasy spots and applying one coat of cement base paint, complete all as specified and directed. |
| 67 | M&L for preparation of old wooden surfaces or articles of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 68 | Notes :- An amount of Rs. 96,515.00 on account of Credit Schedule for Schedule "A" Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
