Rural Development Department has published Tender For Supply The Rate For Open Gym Item For Zilla Parishad, Beed. Submission Date for this Tender is 01-01-2024. Cross Trainers Tenders in beed Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Dec-2023 | Date extension | Date | 01-01-2024 |
| Sl. No. | Item Description |
| 1 | Supply the rate for Open Gym Item for Zilla Parishad, Beed (supply the rate including GST and all taxes) |
| 2 | AirWalker Providingand fixing Airwalkermade form G.I pipe Demensions : (L X W X H). =1190X 380X1244 mm. 1) Main Frame - 88 mm dia OD "B" class G.I pipe dually bending desing. 2) Foundationplate-M.S. roundplate of 250mmdia& 8mm thick. 3) Paddle-42mmdia OD roundG.I. pipe. 4) Handle-33mmdiaOD "B"class Gipipe. 5) Footrest-cast iron 124 X296X5 mmthickandM.S.plateof2 mmthick use to supportit. 6)Top Closing cap - dome shape madeby PP/ NYLON/HDPE material. 7) Closing cap’s-PP/ NYLON / HDPEmaterial. 8) Bracket-8mmthicklaserprofile isusetosupportpaddleframe. 9) Foundationstool:Madefrommain pipe 88mmdiaODM. Spipe and top support ofM.S. round plateof "250 mm dia &8 mm thickness is weldedtop.square tubeof30x30x"2mmis usefor to support centerpipe.Heightoftool is3ft. Foundationstool isembeddedinCC..stockbelow groundlevel. Bearing- use is 6005permanent luubricatedreputedbrands. Pin"s - 25mmdia M.S.brightbar pin. Circlips-A24 circlipsareusedfor assembly. Bearingbushes - 60mm diaODseamlesspipe. Coating -bestqualityofpowdercoating 80- 100micron. safetyInstructicunsand Exercisechart-start& finish positionstickon product. Excavationfor-pit as per drawing60x60x75 cm and filledbyconcrete M-20orasdirec tedby Engineer-in-charge. |
| 3 | ChestPressDouble Providing andfixing chestpressDoublemade fromG.I.pipe.Dimensions:(L X WX H)=1955 X7.10 X1900 mm. 1) Maincenterpipe-- 1.14mm diaOD "B"classG.I.pipe. 2) Foundationplate-M.S.roundplateof"250mmdia& 8mm thick. 3) Foundations covercap- dome shape of PP/NYLON/ HDPE material. 4) Remeniningframe-madeupof48mm dia OD "B"ClassG.I.pipe. 5) Handle- Madeupof48mm diaOD"B"ClassG.I.pipe. 6) Link made upof48 mm diaOD "B"Class G.I.pipe. 7) ceatandbackrest-360 X300 X2mm thickM.S.seat twithcorner fillet forsafety. 8) BearingbestClosingcap"s-PP/ NYLON/ HDPEmaterial. 9) Handle inc oonectedwith frameby 8 MM lasercuttingMS profile. 10)Top Closing cup - dome shapemode byPP/ NYLON/ HDPE material 11)Foundation stool:ModefrommainpipeSSmm diaODM.Spipe and temp support of M.S. round plateof 250 mm dia 8 mm thickneesis welded top dot squre tube of30 x30 x2mmisusefear tosupportcenterpipe.Heightofstool is 3ft. FoundationstoolisembeddedinC.C.stockbelowgroundlevel. Bearing-Useis6005permanentlubticatedreputedbiand.Pin -Modeupof25mm diaM.S.blightbarpin. Bearingbuashes- 6 0 mmdiaODseamless pipe. Grips - Highqualityrubber46 mm dia OD. Circiips-A24circlips ai-eused for as terribly. Costing - bestqualityofpowder costing S0-100 micron. SafetyInstructionsandExercisechart-start8i fini-shpositionstickon product. Execavationforpitas per drawing60x 60x75cmandfilledbyconcrete M- 20or as directedby Engineer-in-charge. |
| 4 | TripleTwister Providing andfixing Triple Twister(Standing position-2 -and Seating position-l)made fromG.I.pipe. Dimension ( L X W X H) 1500 X 1500 X 1420MM1)Main frame-114 MMdiaOD "B"classG.I.pipe.2)Foundationplate-M.S.roundplateof250 mm dia & 8mrs thick.3) Seatplatesupport- 60mmdiaOD"B"ClassG.I.Pipe.4) Seating ring - 33 mm dia OD "B" classG.I pipe by rolling .5) Seating ring support - 33 mm dia OD "B" classG.I pipe .6) Remenig frameis made by 100 x 50 x 2.5 mm rectangular pipe.7) Standing plate - 300 mm dia OD x 10 mm thick ms plate .8) Seating plate - 300 mm dia OD x 10 mm thick ms plate . 9) Seating seat position and other two standing position plates are fixed 120 degrees each from other.10) Handle - 33 mm dia B class G.i Pipe made by rolling .11) Top Clsing cap Kome shape made by PP / NYLON / KDPE material. 12) Foundatio stool: made from main pipe 88mm dia OD M.S pipe and top support of MS round plate of 250 mm dia & 8 mm thickness is welded top. Square tube of 30 x 30x 2 mm is use for to support center pipe Height of stool is 3ft.Foundation stool is embedded in C.C stock below ground level.Bearing Used is 6005 permanent lubricated reputed brand.Bearing bushes 60mm dia OD seamless pipe. pin made up of 25 mm dia M.S cright bar Circlips A24 circlips are used for assembly. coating best quality of powder coating 80-100 micron.Safety instructions and Exercise chart start & finish position sicks on product.Excavation for pit as per drawing 60 x 60 x 75 cm and filled by concrete M-20 or as directedd by Engineer in charge. |
| 5 | HorseRider ProvidingandfixingHorseRidermade fromG.I.pipe. Dimensions:(L X W X H)=1 140 X40 0 X 14G0mm. 1) Main frame114 rum dlaOD "B"class G.I.pipe. 2) Foundation plate -M.S. round plateof 250mmdia8 mm thick. 3) FoundationcovercapdomeshapeofPP/NYLON/HDPE material.madeby48mmdix OD"B"classG.I.pipe. 5) seatframe- Is madeby48mmdiaOD "B"classG.I.pipe. 6) Seatpositionmustbe horizontalto 110- ISOdegree. 7) Link - made up of 48 mmdiaOD "B" Clos.s G.I. pipe. Angle betweenis link andground position is10-"20degree. 8) Handle-33run diaOD "B"Class-G.I.pipe. 9) Paddle verticalsupport -60mmdiaOD "B"ClassG.I. pipe. 10) Handleframe-42mm diaOD"B"ClassG.I.pipeduallybendingdesign. 11) Fountpipe-32 mmdia OD "B"Class G.I pipe OD x 10 mm thick ms plate .12) Supportframe- 10 mmthickMSflatisuse . 13) sheet-5mmthickMSlasercuttingprofileisused. 14) Bearing bushclosingcap-PP/NYLON/ HDPE material. 15)Foundationstool:MadefrommainpipeSSmmdiaODM. Spipe and top support of M.S. round plate of250 rum dia & 8min thicknessisweldedattop.Squaretubeof30x30x"2mm is use fortosupportcenterpipe.Heightofstoolis3ft. Foundati‹onstoolis embeddedinC. C.stockbelowgroundlevel.Bearing-Useis6005permanentlubricatedreputedbrand. Bearingbushes -6.0mm dia OD frame Pin-Madeof25mmdiaM.S.brightbar. Grips-Highqualityrubber46 mmdiaOD. Circlips-A 2.4circlipsare useforas terribly. Coating- bestqualityof powder coating6.0to70micron. Safetyinstructions andExeicisechart -start finishposition stickon product. Excavationforpitasperdrawing60x60x75 cm and filledbyconcrete M-20or‘as directedbyEngineer-in-charge. |
| 6 | LegPressDouble ProvidingandfixingLeg Press DoublemadefromG.I.pipe. Dimensions:{L XWXH)=1676X4GC0X 1500mm. 1) Main frame- 114mmdiaOD "B"class G.I. pipe.2) Foundation plate -M.S. roundplate of250mm dia & 8mmthick 3) Foundation cover cap dom shep of PP/NYLON/ HDPE material. 4) Limk is 60 mm dia OD "B" class G.I pipe. 5) Seat farame 42 mm dia OD "B" class G.I pipe.6) Leg press back rest should be angled in 120-130 degree. 7) Foot rest cast iron 124 x 296 5 mm thick and m.S plate of 2 mm thick use to support it.8) Seat 360 x 3002 mm thick M.S seat with corner fillet for safety.9)Link conected both frame by 8 MMthick laser cutting MS profile. 10) TopClosingcap -dome shape madebyPP/ NYLON/ HDPE material. 11) Closing cup’s- PP/ NYLON/ HDPE material. 12) Foundationstool:Madefrommainpipe89mmdiaOD M. Spipe and toys support of M.S. roundplate of "25O mmdia OD8 mm thickness isweldedattop.Squaretubeof30x30x2nunisuse frrtosupportcenterpipe.Heightof.stoolisAft. Foundationstoolis embeddedinC. C.stockbellowgroundlevel. Bearing-useis6005 permanentlubricatedreputedbrand. Pin-25 mmdiaM.S.brightbarpin. Bearingbushes-60 mmdiaOD seainless pipe. Circlip-A 24circlipsare used forassembly. Coating-bestqualityof powdercoating80- 100micron. safetyIstructioasandExercisechart-start&finishstickor product. Excavationforpit as per drawing60 x60x75cm and filledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
| 7 | Rower ProvidingandfixingRoom ermadefromG.I.pipe. Dimension s:(1X WXH)=1472 X915X1040mm. 1) Upperandbottompipes S8 mm dia OD "B"ClassGIpipe. 2)Foundationplate-M.S.roundplate of250 mm dia 8mm thick. 3) Handle-33 dia OD "B"ClassG.I.pipe. 4) Ariglebetweenhandleandhorizontalsurface is75-50degree. 5) Linkages-48mmdiaOD"B"ClassG.I.pipe. 6) Seat-36.0X300 X2 rum thickM.S.seatwithu ‹oi‘nerfilletfor safety. 7) Footresting pipe-6.0dia OD "B"ClassG.I. pipe. 8)EndClssing cap dome stage madeby PP/ NYLON/ HDPE material. 9)Closing caps - PP/ NYLON / HDPEmaterial. 10)Foundationstool:Made from mainpipe8mm dia ODM.Spipe and top support of M.S.round plateof 250 mm dia&8 mm thickness is weldedattemp.Squaretubeof30 x3Ox2 mmisuse fearto supportcenterpipe.Heightofstool is3ft. Foundation is embeddedinC.C.stock belowgroundlevel. Pin25 mm dia M.S.brigh bar pin. circlipsA 24 circlips are used for Assemby. Bearingbushes-60 htm dia ODseamless pipe / Bar. Bearing useis6005 permanentlubricatedreputedbrands. Grimes-highqualityrubber46 mm OD. Coating - bestqualityofpoweder coating80- 100micron. SafetyInstructionsandExercisechart-star tfifinicshpositionstickon product.- Excavationforpitasperdrawing60x 6.0x75 cm andfilledbyconcrete. M-20oras directedbyEngineer-in-charge. |
| 8 | Seate d PullerDouble Providingandfixing Seat.edpullerdouble made fromG.I.pipe. Dinaensi"ons:(L X WX H)=19 S5 X 66.0 X1955 mm. 1) Maincenterpique- 1.14mm dis OD"B"chs sG.I.pique. 2) Foundationplate-M.S.rounddeleteof2 S0 mmdix8mmthick. 3) Foundations cover clap-domeshape ofPP/NYLON / HDPE material. 4) Remainingframe- made upof48mm dia OD"B"Cla.ssG.I.pipe. 5) Handle Madeupof48rum aliaOD"B"ClassG.Ipipe. 6)sheet-3GOX300 X2nutthickM.S.sentEUcornerfilletfor safety. 7) HandleIs clean criedwith frame by8mmheel- cuttingMSprcofile. 8) TopClosingcup - frame shape madebyPP/NYLO N / HDPE material. 9) Closingcap"s-PP/ NYLON/HDPE material. l0) Foundationstool:Madefrommainpipe9.Smindia ODM.Spipe and top support ofM.S .ro undplateof 250turn dia fi8mm thicknessis w eldedtop.Squaretubeof30x 30 x2mmis usefor to supportcenterpipeHeightofstool is3ft. Foundationstool is embeddediriC.C. stock bellowgroundlevel.Bearing-Use is6005permanentlubricate d reputedbrands. Pin-Madeupof2.5mrs diaM.S. brightbarpin.Bearingbushes•6.0 mm dia ODseamlesspipe. Grips•Highqualityrubber-46mmdiaOD.Circlips-A24circlipsareusedfor assembly. Coating - bestqualityof pewdercouting80-100micron. SafetyInstructionsandExert i e chart-start8sfinishpositionstickon product. Excavationforpitas per drawing60x 60x 75cm andfilledbyconcrete M-2Goras directedbyEngirier-in-charge. |
| 9 | ShoulderBuilderDouble Providingand fixingShoulderBuilderDoubt e madefromG.I.pipe. Dimensions:(L XWXH)=690X558X150.0mm. 1) Main frame-Modefront114mmdiaOD"B"Class G.I.pipe. 2) Foundationplate-M.S.round plateof 250mmdia&8 mmthick. 3) Foundation cover cap - dconie shape of PP/ NYLON/ HDPE4)Shoulder ringpipe-33 mmdixOD"B"Class G.I.Pipe. 5) Shoulderringpipesuns oi‘t-2 S mmdiaOD"B"Closs G.I.Pipe. 6)Nylon knob with Bearing- Is fixed or shoulder ring pipe for rotating purpose. 2 set to be fixed in a positon for kids and adults. 7) Top Closingcap"s-PP/ NYLON/ HDPE material. 8) Closingcap- PP/ NYLON/HDPEmaterial. 9) Foundationstool:ModefrommainpipeSS mmdiaOD M. S pipe and top support of M.S. roundplateof 250 mm dia 8mm thicknessisweldedat top.Squaretubeof30x3Ox2mm is use fortosupportcenterpipe.Heightofstool is 3ft.FoundationStool isembedded inC. C.stockbelowgroundlevel. .Bearing-Useis6005permanentlubricated reputedbrands. Pin- 25 mm diaM.S.Foundationplate-M.S.roundplateof"250mm dia 8mm thick. Bearingbushes 60 mm dia OD seamless pipe. Circlips-A 24circlipsare used forassemby. Coating-best‘ qualityof powdercoating80- 10.0micron. SafetyIr structionsmd Exerci sechart-startfinishpostionstickon prcoduct. Excavationforpitasperdrawing60x6Gx75cm mdfilledbyconcrete M- 20orasdirectedbyEngineer-in-charge. |
| 10 | Sit UpBoard ProvidingandfixingbitUpBoard made fromG.I.pipe. Dimensions:(L XWXH)=1570X450X60.0mm. 1)Main frame - made froom 33mm dia OD "B" C1ass G.I. pipe bendingdesign. 2) Foundationplate-M. S .roundplate of2.50mm dia &8 mmthick. 3) Leg Support-6.0 mm dia OD "B"ClassG.I.Pipe. 4)RemainingFrame-6.0nun dia OD"B"Cls.ssGIpipeand 100X 50 MWpipe. 5)Backrest sheet made of M. SCheckered Plate sheet of 3 mm thickesssize 1100mmx310mm. 6) Foundationstool:ModefrommainpipeS 9mm dix OD M. Spipe and top support of M. 5 . round plate of 250 mmdia 8 rum thickness isweldedtop.Squretubeof30x30x2mmis use for tosupportcenterpipe.Heightofsteelis3ft. Foundationstool isembeddedinC. C.stockbelowgroundlevel.Coating-bestqualityofpowdercoating80-100 micron. SafetyInstructionsandExercisechartstart& finishpositionstickon product. Excovationforpitasperdraiving6.0x6.0x75 cm aridfilledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
| 11 | Sky Walker ProvidingandfixingSkyWalkermade fromG.I.pipe. Dimmentions: {L XWXH)=1720 X910X1700mm. 1) Main frame- Made of SS mrs dia OD"B" class6.1 pipe dually bendingdesign. 2) Foundation plate - M.S. round plate of 250 mindia&8 mm thick. 3) Paddleverticalsupport- 60 mm dia OD "B"ClassG.I.Pipe. 4) Handle-33 mm dia OD"B"Class G.I.Pipeduallybendingdesign. 5)Leg movementframe-50 mmX50 mmX 2mmthicksquarepipe. 6) Footrest-castiron124X296X 5 mmthickandM. S .plateof2 mmthickusefortosupportit. 7) Top Closing cap-done shapemade by PP/ NYLON / HDPE material. 8) Closingcup"s-PP/NYLON/ HDPE material. 9)Foundatic›nstool:Madefrommain pipeSSmmdiaM. Spipe,and tempsupportof M.S.round plateof250mmdia&8 rumthickness iswelded top. Square tube of 30 x 30 x 2 mm is use forto supportcenterpipe.Heightofstroolis3ft. Foudation stool is eimbbededinC. C. stock belowgroundlevel. Grips - High qualityrubber46 mm dia OD. Bearing-Use is6005 permanentlubricatedreputedbrand. Bearingbushes-60mm dia OD seamlesspipe.Pin-Modeof25 and diaM.S. bright bar. Circlips - A 24 circlips are used fler asterribly.Costing-best qualityofpoderc‹aating8O-100mirron. Safety In structionsand Exercisechart-startRfinishpositionstickon product. Excavationfor-pitasper drawing 60x6Ox75 cm andfilledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
| 12 | SurfBoard ProvidingandfixingSurf Boardmade from G.I.pipe. Dimensions:(L XWXH)=IGA GX8S O X 13S Gmm. 1) Mainframe-Madefromto opipesof1.14mmdia OD"B"class G.I.pipe. 2) Foundationplate-M. S.round plateof 250mmdia & 8mmthick. 3) Connecting pipe - 8- mm dia OD "B" class GI pipe is used to connectbothmainframepipesat topend and 42mmdiapipeis usedtoconnectatbottom end. 4)Handle-42 mm dixand33miv dixOD "B"ClauseG.I.pipe. 5)Supportpipe-6.0mm dia isuse tosupport leg moveventframe. 6) Legmovementframe-42 mmdiaOD"B" 1ClassG.I.pipe. 7) Footrest-castiron325X270X 8sim thickandM.S. plateof 250 x200 x2 mmthick usefortosupportit. 8) Bracket-Bmm thickloserpre fileisuse tosupportlegmovement frame. 9) Top Closingcup- domeshape made byPP/ NYLON / HDPE material. 10) Closingcup"s- PP/ NYLON /HDPE material. 11) Foundationstool:ModefrommainpipeSSmmdixOD M. Spipe and top support of M.S. round plate of 250 mmdiaidia 8 mm thickness is w eldedattop.Squaretubeof3Ox30x"2mm is use fortosupportcenterpipe.Heightofstool Is3ft. Foundationstool isembeddedinC. C.stockbelowgroundlevel.Grips Highqualityrubber46 mmdiaOD. Bearing-Useis6005permenentlubric ated reputedbrand.Bearingbushes-6.0mm dia OD seamless pipe. Pin-MadeofUS mmdiaM. S.brightfar. Circlips-A "24circlipsareused foras sembly. Coating-bestqualityof powdercoating50- 100 micron. SafetyInstructionsandExercisechart-start&finishpositionstickon product. Excavationforpit as per drawing60x60x75 cm and filledbyconcrete M-20 orasdirectedbyEngineer-in-charge. |
| 13 | ExerCycle ProvidingandfixingExerCycle madefromG.I.pipe.Dimensions:(L XWXH)=1340X7.10 X 1190mm. 1)MainFrame- 1.00mrs X 50mmX 2. 5mmrectmgularCRpipe with bendingdesign. 2) Foundationplate-M.S.roundplateof 250mmdia&8rumthick. 3) Handle-33mmdiaOD "B"ClassGIRoundpipedullybending design. 4) Sideandtopcover-- 1.6mmthickMSlasercuttingprofileisused. 5) Seat-5 mm thickMSlasercuttingprofileisu sod. 6) Paddle-100rumX50rumcapsulepipeand40x16mm MS flat isusefear-cairn ectingthepaddleandshaft. 7) Closingcap"s- PP/ NYLON / HDPE m-atei-ial. 8) Foundationstool:Madefrommainpipe8 mmdiaOD M. Spipe and top support of M.S. roundplate of "2S0 mmdia& 8 mm thicknessisweldedtop.Squaretubeof30x30x2mmisuse for tosupportcenterpipeHeightofstool is3 ft. Foundationstodelis embeddedinC. C.stockbelowgi‘oundlevel. Bearingbushes-6.0rust dia OD seamless pipe.BearingUse is6005 permanentlubricatingscaledreputedbrand. Shaft-Modeupof25mrs diaOD MS Brightbar. Circlips-A24circlipsareusedforassembly. Coating-best qualityof powdercoatingS 0- 1GOmicron. SafetyInstructionsand Exercisechart-start&finishpositionstickon product. Excavationforpitasperdrawing60x60x75 cm and filledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
| 14 | StandingandSeatingTwister ProvidingandfixingStandingandSeating TwistermadefromG.I.pipe. Dimensions:- (L XWXH)=1820 X450 X1270mm. 1) Main frame-114 nimdlaOD"B"chssG.I.pipe. 2) Foundationplate-M.S.round plateof 250mmdia8 mmthick. 3) sheetplatesupport-60mmdiaOD "B"Class G.I.Pipe. 4) Salertingring-33 mmdiaOD"B"Class G.I.Rheemadebyroiling. 5) heatingringsupport 33mmdiaOD"B"ClassG.I.Pipe. 6) Remainingframe-Is madeby 100x 50x "2. 5 mmrectangular Pipe. 7) Standingplate- 300 mmdiaODX10 mmthickM.S.plate. 8) heatingplate-300 mm ODX 10 mmthickM.S.plate. 9) Handle-3.3 mm dia "B"ClassG.I.Pipe madeby rolling. 10) Top Closingcap - DomeshapemadebyPP/ NYLON/ HDPE material. 11) Foundationstool:ModefrommainpipeS 8mm dia OD M. S pipc and top support of M. S . round plate of USG mmdia& 8mm thickenss isweldedtop.Squaretubeof30x30x2mmisuse for tosupportcenterpipe. .Heightofstool is 3ft. Foundationstool isembeddedinC. C.struckbelowground level.Bearing-Used is6005permanent lubricated repurted brand. Bearingbushes -60mm dia OD seamless pipe.Pin-Madeupof25 mmdia M. S. brightbe. Circlips-A24circlipsare usedforassembly. Coating-bestqualityof powdercoating80- 100micron. safetyInstructions and Exercisechart-sctartfinishposiitionstickon product. Excavationforpitasperdrawing60x6.0x75 cm and filledbyconcrete M-20orasdirectedbyEngineer-in-chai‘ge. |
| 15 | Multi-Functional Trainer ProvidingandfixingMulti-Functional Trainer madefrontG.I.pipe. Dimensions(L XWXH)=1390X660X2600mm.1) Mainframe-SSmmdia OD"B"alas.sG.I. Pipe. 2) Foundation plate M. S. round plate of 250 mm dia 8 mm thick. 3) Back support-42 mmdixODroundGIpipe. 4) Leg risersupportpipe-10GX50X2. 5rumthickrectanglepipe.5) Dippinghandle-33 mm dix OD"B"ClassG.I.Pipe. 6) Pushup handle-42 dia OD"B"classG.I.Pipe. 7) Chin-upsupport-50 rarediaOD"B" ClassG.I.Pipe.8) Chin-uphandle- 25 mm dia ODMSbar with knurling. 9) Gips high quality rubber 46mm bar wit h knurling. 10) TopClosingcrop-PP/ NYLON/ HDPE material. 11) Flat-50 x10 mrii flatisused forconnectingmainframe. 12) Foundation stool:ModefrommainpipeSSmrsdiaOD M. 8pipe and keep support of M.S. roundplateof 250 mmdia & 8mm thicknessiswelded top.Squaretubeof30x30x2mmisusefor tosupportcenterpipe.Heightofstool is3 ft. Foundationstooliseinbedded inC. C.attackbelowgroundlevel.Coating bestqualityof powdercoating80-100 micron. SafetyInstructionsandExercisechart-start&finishpositionstickcan product. Excavationfor-pitasperdrawing60x60x75cm and filledbycexcrete M-20 or asdirectedbyEngineer-in-charge. |
| 16 | BenchwithFixedWeight Providingand fixingBench with Fixed WeightmadefromG.I. pipe. Dimensions:{LXWXH)- 1190X1190X1290mm. 1) Mainframe-Made front6.0mm dia OD "B"Class mm G.I.pipe. 2) Foundationplate -M.S.round plateof250mmdia& 8 mmthick. 3) Backrestframe-Madefrom48 mmdiaOD”B”Class mmG.I.pipe. 4) Bottomsupportpipe - S0 X25X25ion thickrectanglepipe. 5) Fixedweight-madefrom 9S 2OR StainlessSteeltube and5kg costinground plate isattachedatboth endofbar. 6) Backrestseat- made of M. SCheckered Plate Sheet of 3 mm thicknesssize1150 mmx305mm. 7) MS Flat50 x10 -isusedforconnectingmain frameandbackrest frame. 8) TopClosingcup"s - M.S.cup isused. 9) Foundationstool:MadefrommainpipeSPmmdiaOD M. Spipe and top support of M.S. roundplate of 250mm dia fi 8mm thickness isweldedtop.Squaretubeof30x30x2rrimisuse fear tosupportcenterpipe.HeightofStoolis 3feet.Foundationstool is embedded in C.C. stock below ground level. Locking chain Used to connectfixed weightwith mainframe. Coating best quality of powder sting 80-100 micron. Safety instructionand Exercise chart start & finishpositionstickon product. Excavation forpitas drawing60x60x75 cm andfilledby concreteM-20 orasdirectedbyEngineer-in-charge. |
| 17 | BenchwithFixed Dumbbells ProvidingandfixingBench withFixedDumbbellswade fromnG.I.pipe. Dimension:(L XWXH) =I650X960 X810 mm. 1) Mainframe-Madefrom48 mmdiaOD"B"Ctac.s mmG.I.pipe. 2) Foundationplate-M. S.roundplateof 250mm dia& 8mmthick. 3) Dumbbellsupportingframe-Madefrom48 mmdia &D "B"Cl as.s aim G.I.Rpe. 4) Seating frame- 50 x 25 x 2mm thickness rectangular pipe is5) Fixed weight-madefrom 9S 202StainlessSteeltubearid5kg costinground plateweightisattachedatbothendofbar. 6) 8mm lasercutM. S .profile-Isuseforconnectingthedumbbell frameandmain fi-awe. 7) Footrest-TOx"25 x2rumthicknessrectangularpipe isused. 8) Foundationstool:Madetrendmainpipe99mm diaOD M. Spipe and top support of M.S. roundplate of "2S0 mmdia& 8 mm thicknesslSweldedtop.-Squaretubeof30 x30x2 mmisus.for tosuppoltcenterpipe.Heightofnet ro1 is3feet. Foundationstool isembeddedinC. C. .stockbelowgroundlevel.Coating-bestqualityof powdercoating 80-100 micron. SafetyInstructionsandExercisechart-startR finishpositionstickon product. Excavationforpitesperdrawing60x60x75 cm and filledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
| 18 | BackExtension ProvidingandfixingBackExtensionmodefromG.I.pige. Dimensions: (L XWXH)—1060X730 X990 mm. 1) Mainframe- Madefrom 88 mm dia OD"B"Classmm G.I.pipe. 2) Foundationplate-M.S.round plateof 250 mmdia&8 mm thick. 3) legSupport-42 mmdia OD "B"G.I.Pipe. 4) Seatrestpipe 42nomdiaOD "B"Class G.I.Pipe. 5) Handlepipe-33mindiaOD"B"ClassG.I.Pipe. 6) Footrest-Costiron124X296 X 5 mm thick and M. Splateof3 mm thickusedtosupportit. 7) Footrestpipe-42mmdia OD "8"ClassG.I.Pipeand80x40mm MS rectangularpipe. 8) Closingcap-PP/NYLON / HDPE material. 9) great 360X 300 X 2 mmthickM.S. seatwith corner filletfor safety. 10) Grips High qualityrubber46mmdiaOD. 11) Foundationstool:Madefrommaispipe80mmdiaOD M. Spipe and top support of M.S. round plate of 250mm dia8 mm thickness isweldedtop.Squaretubeof30x30 x2mmisusefor tosupportcenterFipe.Heightofstocalis3ft. FoundationstoolisembeddedinC. C. stockbelowgroundlevel. Coating-bestqualityof powdercoating80-100 micron SafetyInstruction sandExercise chart-start&finishpositionstickon Exvacationforpitasperdrawirig60 x 60 x75 cmfilledbyconcreteM-20orasdirectedbyEngineer-in-charge. |
| 19 | Chest PressSingle ProvidingandfixingchestFrom sSingle madefrom G.I.pipe.Dimentions:{I X WXH)- 1060X 730 X 990 mm 1) Maincenterpipe--114mmdiaOD "B"class G.I.pipe. 2) Foundationplate-M.S.i-oundplateof 250 mm dia 8s8mm thick. 3)Foundations cover cap-drone shape of PP/ NYION/HDPE materil. 4)Remainingframe- madeupof48 mmdiaOD"B"Class G.I.pipe. 5) Handle-bladeupof48 mrnadia OD"B"ClassG.I.pipe. 6) link- made upof48 mrsdiaOD"B"ClassG.I.pipe. 7) Seatfibackreest-360 X 300X 2mm thickM.S.sentwithcorner filletforsafety. 8) BearingbushClosingcap"s-PP/NYLON/ HDPE material. 9) Handle iscourected with frame by8 MM 1asercuttingMSprofile. 10) cap- done shapemade by PP/ NYLON/ HDPE material. 11) Foundationstool:Madefromminpipe85mmdiaODM.Spipe and top support of M.S.round plateof 250mm dia &miv thicknessis weldedtop.Squretubeof30x30x2mmisusefor twosupportcenterpipc.Heightofst rol is3ft. Foundationstooa1 isembeddedinC.C.stockbelow groundlevel. Bearing-Use is6005 permanertlubricatedreputedbrands. Pin -Madeup of25 mmdia M.S.brightbarpin.Bearingbashes-6.0 mm dia ODseamlesspipe.Grips- Highquality rubber 46mmdiaOD. Circlips-A24 cir clipsareusedforas sembly. Coating-bestqualityof powderccritin 80- 100micron. SafetyInstructionsandExercisechart-start finishpositionstickon product. Excavation forpitasperdr wing60x60x75cru.andfilledbyconcrète M- 20ora.sdirectedby Engineer-in-charge. |
| 20 | InstructionBoard Dimensions:(L XWXH)- D90 X430 X244O mm. lnstruction board made up of"B" class G.I.PigeofdifferentNB.nominal Bore sizei.e internal diameterof pipe inmilimeters. 4O mm NB: Centerpipe,foundationmais frarne. Theinstructionfond is modeupofACP (AluminiumC omposite Panel) thicknessof3mrs. M.S.Wgle23 x 23 x1 .8mm foundation supportframe. M. SPipe40 x2O x1.8 mmi foundationmain frame. NutandBolt-Hightensilesteel withgalanized outandbotsare used. Po-nderC rating-bestqualityofp"u w5ercoating80-100 micron. Excavation forpitasperdawing60x6Ox75cmandfilledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
| 21 | DoubleTwisterStanding ProvidingandfixingDouble TwisterStandingmade fromG.I.pipe. Dimentions:(LXWXH)=1820X4SOX1270 mm. 1) Mainframe-1 1 4lTlIIldlv OD "B" chs >-G.I.pipe. 2) Foundationplate-M.S.roundplateof 250 mmdia&8 mmthick. 3) Seatplatesupport-6.0modia OD "B"ClassG.I.R }oe . 4)Standingring-33 mmdiaOD"B"Cses G.I.Pipemadeby rolling. 5) Standingringsupport--33rarediaOD"B"ClassG.l.Pipe. 6)Remainingframe-1smadeby 100x 50x25newrectangular pipe 7) Standing plate-3GOmmdiaOD X 05 mmthickM.S.plate. 8) Handle-33 mmdia *B"C1as sG.I.Pipemadeby rolling. 9) TopClosing cup - Dome shapemadeby PP/ NYLON/ HDPE material. 10) Foundationstool:Madefrommainpipeseeom dia ODM. Spipe andtop support of M.S .round plot.cof 250mmdia&8 mm thickness is weldedtop.Squaretubeof30 x 30 x 2mmisusefor to supportcenterpipe.Heightof stoolis 3ft. FoundationstooliseinbeddedinC. C.stookbelow ground level. Bearing-Used is 6005 permanentlubricatedreputedbiand.Bearingbush es -60 nimdiaODseamlesspipe. Pin-Made upof25mmdiaM.S.brightbar. Circlips-A24circlipsare used foras sembly. Coating-bestqu alityof p"oder-cc.stingSO- lG 0 micron. SafetylnstructionsandExercisechart-start& Finish positionstickcan product. Excavationforpitasperdi using60 x 6.0x75 cm and filledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
| 22 | PushUpBar ProvidingandfixingPushUp Bar madefromG.I.pipe. Dimensions:(L XWXH)- 12EOX530X I5GO mm. 1) Main frame -88 mm diaOD"B"class G.I.Pipe. 2) Leg & HandSupport-33mmdia. OD8 class G.I.Pipe. 3) Foundationplate-M. S.roundplateof 150mmdia & 8mmthick. 4) Top closing cap DomeshapemadebyPP/ NYLON/ HDPE material. 5) Closingcap"s-Plasticmolded 6) Foundationstool:Modefrommainpipe 88 mm dia OD M.S.pipe and topsupport of M.S. roundplate of 250 mm dia & 8 mm thickness isweldedtop Squaretubeof30x30x2mm isuse for tosupportcenterpipe. .Heightofstool is3ft. FoundationstooliseinbeddedinC. C.stookbelouwgroundlevel. Coating- bestqualityofpowdercoating80-100 micron. SafetyInstructionsandExercises - chart-start & finishpositionstickor product. Excavationforpitasperdrawing60x60x75cmandfilledbycan concrete M-20or directedbyEngineer-in-charge. |
| 23 | TaichiSpinner ProvidingandflingTai chi SpinnermadefromG.I.pipe.Dimensions: (L XWXH)=1200 X680X 1370mm. 1) Mainframe-Modefrom114 mmdiaOD"B"Class G.I.pipe. 2)Foundationplate-M.S.round pla.eof250mm dia 8rare thick. 3) Fouridatiioncover capdone shape of PP/NYLON/HDPE ”material. 4)Thaichi ring Snipe-33mm dia OD "B"ClassG.I.Pipe. 5)Thaichi ringpipesupport -25mmdiaOD"B"Ches G.I.Pipe.6) Nylon knob with Bewring - Istimedonshoulder ring pipe for roteting pusrpose. 7) TopClosingcup"s-PP/ NYLON/ HDPE material. . 8) Closingcap- PP/ NYLON / HDPE material. 9) Foundationstool:Madefrontmainpipe88 mm diaOD M.S.pipe and topsupport of M.S. roundplateof 250 mm dix R 8 mm thicknessis weldedattop.Squaretubeof30x30x2mmisuse fortosupportcenterpipe.Heightofstoolis 3ft. FoundationstcoolisenibeddedinC. C.stockbelowgroundlevel.Bearing-Useis50.0.5permanentlubricated reputedbiand. Pin-25 mmdiaM.S. Foundationplate-M. S.roundplateof 250 mmdiaRSmmthick. Bearingbushess -60mmdia ODseamless pipe. Circlips-A 24Circlipsare used forassembly. Coating-bestqualityof po /cdercooating80-IONmicros. SafetyInstructionsandExercisechart-start&finish positionstick on product Excavation for pitasperdrawingCOx60x7.5cn‹ and filledby concreteM-20 as directedbyEngineer-in-charge. |
| 24 | ThreeinOneComboUnitChestpress/Airwalker/ SeatedPuller. ProvidingandfixingThreeinOneComboUnitmadefromG.I.pipe.Dimentions:(L XWXH)=2740 X7.10X2.130mm. 1) Main centerpipe-114 mmdiaOD"B"classG.I.pipe, 2) Mainpipe-Airwalter99mmdiaOD "B"classG.I.piledually bendingdesign. 3) Foundationplate-M. S.roundplateof250mmdia&8mmthick. 4) Founclation cover cap - dome stape ofPP/ NYLON / HD PE material. 5) Rerriiving frame upof48mm dia OD "B"Clas >G.I.pipe. 6) Handle Madeupof48rrimdiaand 33mmdiaOD "B"ClassG.I. Pipe. 7) Paddle- 4"2rum dia ODroundG.I. pipe. 8) Seat-360X300X2 mm thickM.S.seatwithcornerfilletfor safety. 9) Footrest-castiron124 X 296 X 5 mmthickandM.S.plateof2 mmthickuseto supportit. 10) HandleIs conectedwith frame by 8 MM lasercuttingMSprofile. 11) Bracket- 8 mmthick leserprofile isusetosupportpaddle frame. 12) Top Closingcap- domeshapemadeby PP/ NYLON / HDPE material; 13) Closing cap"s - PP/ NYLON/ HDPEmaterial. . 14) Foundationstool:MadefrommainpipeUSmmdia ODM.S.pipe and top support of M.S .round plate of250mm dia & 8 mm thickness is welcledtone.Squaretubeof30X 30 x2mm is use for to supportcenterpipe Heightofstool is3 ft. Foundationstool isernbeddedivC. C. st‹ockbelowgrc und level. Bearing-Useis6005permanentlubicated reputedbrand. Pin- Made upof 25mmdixM.S.brightbarpin. Bearingbushes -60 mmdiaOD seamless pipe.Grips Highqualityrubber46 mmdiaOD. circlips-A24circlipsare used forassembly. Coating bestqualityof powdercoating80-100 micron SafetyInstructionsandExcerciseclart-start & finish position stickon product. Excavationforpitasperdrauúng60x60x75 cmand filledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
| 25 | Four in One Combo Unit Seating Twister/Standing Twister / Leg Press/Airwalkerer. Providingand fixingFourinOneComboUnitmadefromG.I.pipe. Dimensions :(1 X WXH)=2740 X150OX2.130mm. 1) Main centerpipe-1.14mm dia OD "B"class G.I.pipe. 2) Mainpipe-AirwalkerSSmmdiaOD "B"classG.I.pipedually bendingdesign. 3) Foundationplate-M.S.roma dplateof250mmdiaR8mm thick. 4) Foundation covercap- dome shapeof PP/ NYLON /HDPE material. 5) Remainingframe-madeupof48 mm diaOD"B"C1assG.I.pipe.6) Handle-Made upof48 mmdiaand33 mmdiaOD"B"Clash-G.I. Pipe. 7) Paddle-42 mmdiaODroundG.I.pipe. 8) seat360x 300 x 2 mmthick M.S. seat with cornerfillet for safety. 9) Footrest-casttroll124X296X 5mm thickandM.S.plateof2 mmthickusetosupportit. 10) Handleisconnectedwithframeby8 MMlasercuttingMSprofile. 11) Bracket-8 mmthicklaserprofileisusetosupportpaddleframe. 12) Top Closing cap- dome shape wade by PP/ NYLON/ HDPE material. 13) Closingcap"s -PP/ NYLON/ HDPE material. . 14) Foundationstool:MadefrommainpipeSSmmdiaODM.S.pipe and top support of M. S . round plate of 250 mm dia & 8 mm thickness isweldedtop.squre tubeof30x30x"2mm is use for tosupportcenter pipe Heightofstr.• 1 is 3ft. FoundationstoolisembaddedinC. C.stockbelowgroundlevel. Bearing-Use is 6005permanentlubricatedreputedbrand. Pin-Mode upof25mm diaM.S.brightbarpin. Bearingbushes-6.0mm dia OD seamless pipe.Grrips Highqualityrubber46tomdiaOD. Circlips-A24circlipsarereed foras sembly. Coming-bestqualityof pu z dercoating 80-100 micron. SafetyInstructionsandExercisechart-start&finishpositionstick on product. Excavationforpitasperdrawing60x60x75 cm and filledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
| 26 | Cross TrainerSingle ProvidingandfixingCross TrainersinglemadefromG.I.Pipe.Dimensimons: (L XWXH)=1140XSSO X1650mm. 1) Mainframe- Madecross mmdiaOD "B"class G.L pipedually bendingdesign. 2) Foundation plate M. S . round plate of 250 rrim dia&8 mm thick. 3)Paddleverticalsupport-42mm dia OD "B"ClassG.I.pipe. 4)Handle-33 mmdiaOD"B"Closs G.I.pipeduallybendingdesign. 5) Legmovement frame- 50mm X 50mm X 2mm thick square pipe. 6) Footrestcastiron124X296X5mmthickandM.S.plateof2 mmthickusefortosupportit. 7) TopClosingcap-domeshapemadebyPP/ NYLON / HDPE material 8) Closing cap"s-PP/ NYLON / HDPE material. 9) Foundationstool:Madefrommainpipe 88 mmdia ODM.S .pipe, and temp support of M.S .round plateof 250 mm dia & 8 mm thicknessisweldedtop.Squaretubeof30x30x2mm Isuse for tosupportcenterpipe.Height ofstool is3 ft. Foundationstool is embeddedinC.C. stockbelow groundlevel. Grips -Highqualityrubber. Bearing-Use is 6005permanentlubricatedreputedbrand. Bearingbushes - 60 mmODseamless pipe. Pin -Madeof25mm dia M.S.brightbar. circlips- A 24 circlips are usedfor assembly. Coating- bestqualityof powdercoating 80-100 micron. SafetyInstruction and Exercisechart-start & finishpositionstickon product. Excavationfor pit as per drawing60x60x75cmandfilledbyconcrete M-20orasdirectedby Engineer-in-change. |
| 27 | CrossTrainerDouble ProvidingandfixingCross TrainerDouble made from G.I Pipe. Dimensions:{L XWX H) =2280 X 550 X 1650mm. 1)Mainframe-Madeof 88mm dia OD"B" class 61pipe dually bendingdesign. 2)Foundationplate-M.S.roundplateof250 mmdia& 8mm thick. 3)Paddlevertical support- 42mmdiaOD"B"ClassG.I.pipe. 4)Handle-33mm diaOD "B"C1assfi1pipe dually belidingdesign. 5)Leg movementframe-50mmX 50mm X 2mmthicksquarepipe. 6)Footrest-costiron124X296 X5mm thickandM.S.plateof2 mmthickusefortosupportit. 7) Top Closing cup - dome shape made by PP/ NYLON / HDPE material. 8) Closing cap"s-PP/NYLON/ HDPEmaterial. 9) Foundationstool:Madefrommainpipe88 mmdiaOD M.S pipe. and topsupportofM.S.roundplateof250 mm &dia 8mmthicknessisweldedtop.Squaretubeof30 x30 x2mm is usefortosupportcenterpipe.Heightofstoolis3ft. FoundationstoolisembeddedinC. C. stockhelowgroundlevel.Grips - Highqualityrubber. Bearing-Useis6005permanentlubricted reputedbrand. Bearingbushes-60mmmiaODseamlesspipe.Pin-Madeof"25mmdia M.S.brightbar. Circlips-A 24circlipsare used forassembly. Casting- bestqualityof powdercoating80-100 micron SafetyInstructionsand Exercicechart-start & firiishpositionstickon product. Excavationforpitasper-drawing60x60x75cm andfilledbyconcrete M-20orasdlrectedby Engineer-in-charge. |
| 28 | ArmandPaddleBike. ProvidingandfixingArmand Paddle Bike made fromG.I.pipe. Dimensions:(L XWXH)=990X500X880 mm. 1) MainFrame- 100mm X 50 mm X 2. 5 mmrectangular CR pipe withbendingdesign. 2) Foundationplate-M. S.round plateof250 mmdia & 8mmthick. 3) Handle-33mmdiaOD "B"Class61 Roundpipedullybending design. 4) Guideandtop cover- 1.6mmthick MSlasercuttingprofile isused. 5) Seat-5mm thickMSlasercuttingprofile isused. 6) Paddle-100mmX50mmcapsulepipeand40x16mmMS flat isuseforconnectingthepaddleandshaft. 7) Closingcap"s-PP/ NYLON/ HDPE material. 8) Foundationstool madefrommainpipeS"YmmdiaODM.S pige and tc›p support ofM.S. round plate of250 nim dia & S min thicknes S 1sweldedtop.Squai‘etubeof30x30x2mrsisuse for tosupportcenterpipe.Heightofstroolis3ft. Foundationstorolis embeddedivC. C. stockbelowgroundlevel. Bearingbushes-60mmdiaOD seamlesspipe. Bearing-Useis6005permanentlubricatingsealed reputedbrand. Shaft-Madeupof25mm diaOD MSBrightbar. Circlips-A 24círclipsare need for assembly. Coating- bestqualityofpowdercoating80- 100 micron SafetyInstructionsandExercisechart-start&finishpositionstick on product. Excavationforpitasperdrawing60x60x75 cm and filledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
| 29 | Singlebar. Providingandfixing single bar made fromG.I.pipe. Dimensions:(L XWXH)=3550X2590Xmm. 1) Mainframe - made front48diaOD"B"ClassG.I.pipe. 2) FrameofSingleBar- 33ODdia "B" ClassG.I.pipe. 3) Foundation plate-M. S.roundplateof 250mmdia &8 mmthick. 4) TopClosingcap"s-DecentDesign Size PP/HDPE/ MS. Material Foundationstool:MadefrommainpipeSSmmdiaODM. Spipeandtop supportofM.S.roundplateof250mmdia & 8mm thicknessiswelded temp. Square tubeof30 x20x2mm isuse fortosupportcenterpipe. Heightofstool is3ft. Foundationsstool isembeddedinC. C.stockbelowgroundlevel. Coating-bestqualityof powderc.eating 80- 100 micron. Safety Instructions and Exercise chart- MadefromAluminum / stainless- steelstick-onproduct Excavationforpitasperdrawing60x60x75 cm and filledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
| 30 | Doublebar. Providingandfixing single bar made fromG.I.pipe. Dimensions:(L XWXH)=1850X530 X1980 mm. 1) Mainframe - made front48diaOD"B"ClassG.I.pipe. 2)remaining frame- madefrom48 mmdiaOD "B" ClassG.I.pipe 3)Closing cap"s-PP/ NYLON/ HDPE material. Foundati‹on.stool:Modefrancmainpipe88mmdiaODM. S pipeandtop supportofM. S. roundplateof250mmdia&8mm.thicknessIswelded top.Squaretubeof30 x80x2mm isuse fortosupportcenterpipe. Heightofstoolis3ft.FoundationstoolisembeddedinC. C. stockbelow groundlevel. Coating-bestqualityof powdercasting8O- 100 micron. SafetyInstructionsandExercisechart-start& Finish position stickon product. Excavationforpitasperdrawing60x60x75 cm and filledbyconcrete M-20orasdirectedbyEngineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
