Supply Of List Of Indoor Gym Equipments, Panvel-Maharashtra

Supply Of List Of Indoor Gym Equipments-1. LAT PULL DOWN: 1) STRUCTURE AND FRAMES - Structural frames are fabricated from 100 x 50 x 2.5mm thick Capsule (Oval) shape steel tubing. Heavy metal bending design should be used for Main frame, Main Frame Back Side Bottom Support Frame, Seat Frame, should be bending design other side frames to ensure superior strength and to eliminate joint failure. 2) WEIGHT STACK - M.S (mild steel Bright Material Grade) weight stack 80 to 100 micron powder coated with 2 Nylon bushes Each Plate to avoid noiseless operations and all Top Plate use Glass field Nylon Guide bush of size 40 mm DIA, 70 mm long with press fit on all weight stack Top Plate only , all plates should be polycarbonate Colourful sticker Size 20mmX90mmX 175 micron Thick, with LBS and KG Weight Description like 11 LBS To 220 LBS And 5kg to 100kg (as per required weight stack) at front side. 3) FULL COVER FOR WEIGHT STACK MAIN FRAME AND OTHER MAIN FRME – Complete portion of main frame weight stack area front and rear (back) side is covered using heavy quality Acrylonitrile Butadiene Styrene material cover dimensioning L 700 X W 50 X H 1500 and No. Equipment’s Name & Specifications Qty/ Unit Rate shall have no sharp edge to be mounted on main frames. 4) GUIDES – Stainless steel SS202 grade Tube 25mm DIA/ MS Bar Chrome Plated guide support used for weight stack. 5) CENTER SUPPORT- 25mm DIA center support for weight stack selection is made up of stainless steel SS202 grade Tube steel finish. Center Support Top Side Insert M.S. 25 DIA bar 75 mm long Chrome Plated, for wire rope insert and 3 holes for wire rope tightening, bar covered with Soft PVC Cap 75mm long 50 OD and 25.5 ID, Main Pipe Top Closing cap’s- Decent Design Size 120X120 PP/HDPE/MS. material. 6) BEARINGS -For pulley 6203, 30204, lubricated high Grade ZZ steel ball bearing. 7) SELECTOR PINS- Magnetic selector pins; made up of high-quality steel 8mm with spring wire mechanism and nylon knob. 8) SPRING KNOBS - All Spring Knobs Made of MS steel Chrome Plated Knob DIA 44 mm OD and Pin DIA is 10mm OD Spring Knob Should Be in Appropriate select Position with Tightening System. 9) WIRE ROPE AND SPRING SNAP HOOK - 5 mm thick Nylon Coated Wire rope are used, Snap Hook size 7 X 70mm made of MS steel with chrome Plating snap hook attached with MS 25 DIA bar 80 mm long for wire rope insert and 3 hole for wire rope tightening, bar covered with 65mm long 35 OD and 25.5 ID PVC cap Used For LAT And V Rowing Handle, 10) PULLEY – Pulley used are made up of highquality glass filled nylon material 105 mm DIA 19 mm Thick and 10 mm deep grooved, to support cable and double ZZ bearing with M8 pin is used which ensures superior strength and longevity. 11) CUSHION/PADDING - Seats and pads are made up of 16mm thick plywood padded 40 mm of high-density foam and Cushion One Side Half Round Shape and Other Side Radius finally covered with completely stitched heavy vinyl cover in any suitable color. 12) FOAM ROLLER - Foam roller made up of Moulded Polyurethane Flexible Foam Roller, foam Roller Size 140 mm DIA 200 mm Long and both ends inside and outside are covered 1) STRUCTURE AND FRAMES - Structural frames are fabricated from 100 x 50 x 2.5mm thick Capsule (Oval) shape steel tubing. Heavy metal bending design should be used for Main frame , Main Frame Back side Bottom Support Frame, Seat Frame, should be bending design other side frames to ensure superior strength and to eliminate joint failure. 2) WEIGHT STACK - M.S (mild steel Bright Material Grade) weight stack 80 to 100 micron powder coated with 2 Nylon bushes Each Plate to avoid noiseless operations and all Top Plate use Glass field Nylon Guide bush of size 40 mm DIA, 70 mm long with press fit on all weight stack Top Plate only , all plates should be polycarbonate Colourful sticker Size 20mmX90mmX 175 micron Thick, with LBS and KG Weight Description like 11 LBS To 220 LBS And 5kg to 100kg (as per required weight stack) at front side. 3) FULL COVER FOR WEIGHT STACK MAIN FRAME AND OTHER MAIN FRME – Complete portion of main frame weight stack area front and rear (back) side is covered using heavy quality Acrylonitrile Butadiene Styrene material cover dimensioning L 700 X W 50 X H 1500 and shall have no sharp edge to be mounted on main frames. 4) GUIDES – Stainless steel SS202 grade Tube 25mm DIA/ MS Bar Chrome Plated guide support used for weight stack. 5) CENTER SUPPORT- 25mm DIA center support for weight stack selection is made up of stainless steel SS202 grade Tube steel finish. 6) BEARINGS -For pulley 6203,30205,6205, Lubricated high Grade ZZ steel ball bearing. And For Handle Self Lubricated Imported Bush. 7) SELECTOR PINS- Magnetic selector pins; made up of high-quality steel 8mm with spring wire mechanism and nylon knob. 8) SPRING KNOBS - All Spring Knobs Made of MS steel Chrome Plated Knob DIA 44 mm OD and Pin DIA is 10mm OD Spring Knob Should Be in Appropriate select Position With Tightening System. 9) CUSHION/PADDING - Seats and pads are made up of 16mm thick plywood padded 40 mm of high-density foam and Back Rest Cushion One Side Half Round Shape and Other Side

Refer document

Refer document

Refer document