Grama Panchayat has published Tender For Construction Of Anganwadi Ward 8 Chempilavu. Submission Date for this Tender is 23-12-2023. Building Work Tenders in kidangoor Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Stone Aggregate(single size): 40 mm nominal size |
2 | Stone Aggregate(single size):20 mm nominal size |
3 | Coarse sand (zone III) |
4 | Portland Cement |
5 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
6 | Vibrator (Needle type 40 mm) |
7 | Sundries |
8 | Stone for masonry work |
9 | Solid blocks of size 30x20x15cm |
10 | Structural steel such as tees, angles, channels and R.S. joists |
11 | Red oxide Zinc chromate primer |
12 | Adjustable span ESO+SI (2.35-3.40) |
13 | Adjustable telescopic prop 3 m (2.02-3.75m) |
14 | Stone Aggregate(single size): 10 mm nominal size |
15 | Twisted steel/deformed bars |
16 | Fine sand (zone IV) |
17 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
18 | Vitrified floor tile 50x50 cm |
19 | Anjili wood scantls |
20 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
21 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
22 | Bright finished or black enameled mild steel screws 40mm |
23 | Bright finished or black enameled mild steel screws 20mm |
24 | Anjili wood planks |
25 | Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm) |
26 | Mild Steel round bar above 12 mm dia |
27 | Flats up to 10 mm in thickness |
28 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
29 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9mm |
30 | Water thinnable cement primer for interior wall surface,having VOC content less than 50 gms/litre |
31 | Pink primer (for wood) |
32 | Synthetic enamel paint in black or chocolate shade |
33 | Plastic emulsion paint |
34 | Epoxy paint |
35 | Vitreous China orrisa type w.c. pan size 580 mm |
36 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
37 | 100 mm S.C.I. trap with vent heel |
38 | Vitreous China flat back wash basin 630x450 mm |
39 | 15 mm C.P.brass tap |
40 | C.P. brass waste 32 mm |
41 | C.I. bracket for wash basin and sinks |
42 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
43 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
44 | Rectangular shape 453x357 mm Mirror with Plastic moulded frame |
45 | Hard board 6 mm thick |
46 | Rawl plug 50 mm (designation 10 nos) |
47 | Chromium plated Brass screws 25 mm |
48 | Brass full way valve with C.I. wheel (screwed end) 25mm dia |
49 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
50 | Brass bib-cock-15 mm dia |
51 | C.P. Brass angle valve 15 mm |
52 | PTMT - Soap Dish/Holder 138x102x75 mm |
53 | PVC pipe 25 mm outer dia. 10kgf cm2 |
54 | PVC pipe 110 mm outer dia. 4kgf/cm2 |
55 | PVC pipe 75 mm outer dia 4 kgf/cm2 |
56 | PVC vent cowl 75 mm dia |
57 | PVC Elbow 110 mm dia |
58 | PVC bend 110 mm dia |
59 | PVC Tee 110x110x110mm dia |
60 | PVC Reducer 110x75 mm dia |
61 | PVC bend 75 mm dia |
62 | PVC Tee 75x75x75 mm dia |
63 | PVC Elbow 75 mm dia |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail