Military Engineer Services-MES has published Tender For Addition/ Alteration And Special Repair To Bldg No T-47 (Gs Branch Office) Ofhq 55 (I) Mech Bde At Mil Stn Beas Under Ge Kapurthala.. Submission Date for this Tender is 04-01-2024. Building Work Tenders in kapurthala Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-01-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling of asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings including ridges, complete all as specified and directed by Engr-in-Charge. |
| 2 | Dismantling taking down framed trusses of span not exceeding 10m, complete all as specified and directed by Engr-in-Charge. |
| 3 | Taking down chowkats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge. |
| 4 | Taking down chowkats or frames with shutters exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames) Complete all as specified and directed by Engr-in-Charge. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge. |
| 6 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and directedby Engr-in-Charge . |
| 7 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engr-in-Charge. |
| 8 | Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided for Complete all as specified and directed by Engr-in-Charge. |
| 9 | Demolition cement concrete of any description and in any position not otherwise specifically provided for Complete all as specified and directed by Engr-in-Charge. |
| 10 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed by Engr-in-Charge. |
| 11 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thicknness, including cover fillets, complete all as specified and directed by Engr-in-Charge. |
| 12 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge. |
| 13 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge. |
| 14 | Erection and fixing only steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 Complete all as specified and directed by Engr-in-Charge. |
| 15 | S&F Frame work of mild steel work in tubular trusses,including grill door or gate, spcial shaped washer, vertical Post, including bracket, tee, distance pieces,cleat and fixing of gate etc, complete using ERW or induction butt welded tubes, conforming to IS 1161-1979 grade St-240 complete all as specified and directed by Engr-in-Charge. |
| 16 | Erection and fixing only steel tubular work as in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 Complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F rolled mild steel Fe 10-W (Gde-E-250) qualiy-A in Joist,perline, crane gantries,channel, angle,tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for preparation of New steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for in repairs n.exc 2.5cm inlength to the metal not exceeding 6mm thick complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge. |
| 22 | -Ditto- all as per item No 21 above but except bricks etc, complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for Cement Concrete Type B1, 1:2:4 (20mm graded aggregate)in lintels upto 1.5m clear span, cill, bands, plinth courses, coping etc and similar work, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for Form workto sides and sofits of floor or roof beam, girders,lintel, cantilever, shelves includingsupports overhangs, opening of concrete walls, side of RCC/PCC band and lintel in walls, horizontal or slopin and similar work complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to. Complete all as specified and directed by Engineer-In-Charge. |
| 26 | All as per item No 25 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, complete all as specified and directed by Engineer-In-Charge. |
| 27 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and fair, complete all as specified and directed by Engineer-In-Charge. |
| 28 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and fair, complete all as specified and directed by Engineer-In-Charge. |
| 29 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of chalk whiting/priming on plastered surfaces of walls, complete all as specified and directed by Engineer-in-charge. |
| 30 | M&L for preparation of new plastered surfaces and applying Two Coats Oill Bound Distemper over a coat of primer and 1mm thick wall care putty, complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F Vitrified Ceramic Colour light shade Tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36sqm.m. in floors etc, set and jointed in neat cement slurry and pointed in white or colours cement to match with tilesand including 15mm thick screed bed in cement mortar 1:6. Complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F Vitrified Ceramic Colour light shade Tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36sqm.m. in Skirting etc, set and jointed in neat cement slurry and pointed in white or colours cement to match with tilesand including 15mm thick screed bed in cement mortar 1:6. Complete all as specified and directed by Engr-in-Charge. |
| 33 | S&F Non Skid Ceramic Coloured Tiles 7 to 8mm thick(square/rectangular) areaof each tilesexceeding 0.11sq.m. but not exceeding 0.18sq.m, in floorsetc, set and jointed in neat cement slurry and pointed in white or colours cement to match with tilesand including 15mm thick screed bed in cement mortar 1:6. Complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F Glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick setand jointed in neat cement slury and pointed in white or colour cement to match with tiles Complete all as specified and directed by Engr-in-Charge. |
| 35 | M&L for 75mm thick cement concrete type C2 1:3:6 (40mm graded stone aggregate) in sub base complete all as specified and directed by Engr-in-Charge. |
| 36 | M&L for 75mm thick cement concrete type D-2, 1:4:8 as in Subbase flooring, complete all as specified and directed by Engr-in-Charge. |
| 37 | M&L for 50mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in plinth protection finished even and fair laid to a slope of 1 in 20 in alternate bays, each bay not exceeding 3m in length with joint to be filled with bituminous mastic filling comprising a mixture of 1 part of heated hot blown bitumen 85/25 penetration and three parts of heated sand, complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L for ceiling using 9mm thick gypsum based ceiling tiles with wheather resistance face on back side and vinyl finish including framework on the front fixed in 24mm GI armstrong frame work of grid 600x600 mm size, the members of snap grid frame work of GI/Steel section of 24mm wide with T-flanges, channels etc of white colour having rotary stiching on all members, i.e main runner, 1200x600mm cross tee galvanised with minimum thickness of 120 gms per/sqm passed through 500 hrs test and hanging the same with existing roof members such as rafters, pulins or other wooden members particularly provided for hanging pupose using 8mm dia mild steel bar of required length fixed with nut bolt of 50mm long and 10mm dia of neck with washer flat iron 50x6mm thick clamps etc to steel members, complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F 6mm thick PVC hollow wall paneling plain/coloured/printed fixed with screws to wall and corner, edges of panels be sealed with appropriate arrangement, colour and pattern as approved, complete all as specified and as directedby Engr-in-Charge. |
| 40 | S&F powder coated anodised aluminium frame (thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 Nos) suitable handle (1 No.) complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F powder coated anodised aluminium fly proof window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 Nos) suitable handle (1 No.) complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F aluminium diamond grill security window with fly screens, average width of aperture 75mm, premium quality security window with 20mm frame(thickness) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F aluminium alloy wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & directed by Engr-in-Charge. |
| 46 | S&F 5.50mm thick sheet glass but exc 0.5sq.m in each , ordinary quality and glazing with beads fixed with metal panel pins with solar control dil 25micron reflective type sicked to glass panes as per instruction of manufacturers complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F for 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F, aluminium (extruded section)door closer hydraulically regulated designationNo 3, universal type, suitable for door shutters of851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F floor door stopper 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F, 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed completeall as specified and as directed by Engr-in-Charge. |
| 51 | S&F, 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed completeall as specified and as directed by Engr-in-Charge. |
| 52 | S&Fin repair aluminium Hat and coat hooks, solid body, 175mm to 250 mmfixed to wall with screws complete all as specified & as directed by Engr-in-Charge. |
| 53 | S&F Mortice lock 100mm with two leavers (Vertical Surfaces), mild steel body and fixed complete all as specified and directed by Engr-in-Charge. |
| 54 | M&L for 25mm thick damp proof course to horizontal or vertical surfaces including necessary form work with Cement concrete B0, 1:2:4, and applying evenly a coat of hot blown bitumen at the rate of 1.5Kg per sqm and blinding with clean dry sand @ 0.05 cu. m. per sqmand laying a layer of polythene film,50 micron thick,laid on a coat of bitumen primer,@0.30 to 0.50 kg per sq. m.necessary formwork in cement mortar 1:2 complete allasspecified and directed by Engr-in-Charge |
| 55 | S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, & fixing in opening complete all as specified and directed by Engr-in-Charge. |
| 56 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F 125 mm long aluminium anodized cast type handle all as specified and directed by Engr-in-Charge. |
| 58 | S&F 100mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed to PVC door complete all as specified and as directed by Engr-in-Charge. |
| 59 | S&F vitreous china urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with grating and union for dischage pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush pipe grating and union for discharge pipe complete fixed in repairs complete all as specified and as directed by Engr-in-Charge. |
| 60 | S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min weight 60gms) complete all as specified and as directed by Engr-in-Charge. |
| 61 | S&F in repair Coupled closet WC colour, Bowl for coupled WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set size 380x660x765mm and cistern withcistern fittings complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F in repair, vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc with pedestal complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F, 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) with PVC waste pipe for wash hand basin fixed in repair complete all as specified and as directed by Engr-in-Charge. |
| 64 | S&F in repair SDG frameless bevelled mirror for bathrooms Wall and Office, 18x24 Inch (Silver) and 5mm thick looking mirror and bevelled Edge of mirror for 0.75 Inch, Edge thickness shall be 4mm, fitted to wooden plug with CP screws. Complete all as specified and as directed by Engr-in-charge. Make. Saint Gobain/Modi Guard Ultra Mirror by Engr-in-Charge. |
| 65 | S&F in repair, 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F in repair toilet paper holder with flat recessed type stainless steel , chromium plated fixed with brass screws complete all as specified and as directed by Engr-in-Charge. |
| 67 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F, soap dish, stainless steel approximate size 160x160x90mm fixed to wall with chromium plated brass screws fixed in repair complete all as specified & as directed by Engr-in-Charge |
| 69 | S&F in repair, sheet glass shelf PTMT assembly consisting of 5.5mm thick sheet glass shelf 12cm wide fixedwith includingchromium plated screw, bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge. |
| 70 | S&F in repairs stainless steel soap dispensers with bracket complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F Tubular towel rail Brass Chromium plated, D type, 60cm long between flange complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F in repair, 15mm bore Bibtaps, cast copper alloy with crutch , chromium plated, fancy type, screwed down, screwed for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F in repair, 15mm bore Stop Valve/angle valve , cast copper alloy with crutch , chromium plated,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or fpr unions and fixed, complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F Floor grating 100mm dia of PTMT.(Minimum weight 25gms) complete all as specified and directed by Engr-in-Charge. |
| 76 | S&F of PVC connection 15mm size with PTMT nuts of length 300mm Complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F of PVC connection 15mm size with PTMT nuts of length 450mm Complete all as specified and directed by Engr-in-Charge. |
| 78 | Taking up or down, steel tubing 15mm bore and connections including cleaning for refixing and removal from sitecomplete all as specified and as directed by Engr-in-Charge. |
| 79 | S&F 15mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F 20mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge. |
| 81 | Demolition and breaking up 150 mm dia, drain pipes Salt glazed ware, AC or reinforced concrete set in cement mortar complete all as specified & directed by Engr-in-Charge. |
| 82 | M&L for RCC NP2 pipe 150mm dia bore and jointed complete with collars as in culvert complete all as specified and directed by Engr-in-Charge. |
| 83 | M&L for cement concrete ( 1:3:6,type C2) bed to drain pipes of 150mm bore dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engr-in-Charge. |
| 84 | Excavation in trenches, n.exc 1.5 mtr wide& n.exc1.5 mtr depth for foundation, etc, or for shafts, wells, casspits, manholes, pierholes etc. n. exc 10 sqm on plan & n. exc 1.50m in depth and getting out in soft and loose soil complete all as specified and directed by Engr-in-Charge. |
| 85 | Returning, filling in, including spreading, leveling, watering and well ramming the approved soil/earth in layers n. exc 25 cm thickin any type of soil complete all as specified and directed by Engr-in-Charge. |
| 86 | M&L for removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified & directed by Engr-in-Charge. |
| 87 | M&L for providing pre-cast cement concrete 1:2:4 typeB-1 (using 20 mm graded stone aggregates) as in cover slab formanholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered, weathering, throating etc including necessary use and waste of form work complete all as specified and as directed by Engr-in-Charge. |
| 88 | M&L for cutting into existing manholes for connecting new drains, of any dia making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) finished smooth and reforming benching as required for 150 mm dia SGSW pipe complete all as specified and directed by Engr-in-Charge. |
| 89 | M&L cast Iron floor trap 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge. |
| 90 | S&F PVC (SWR) P Trap 110mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge. |
| 91 | S&F PVC (SWR) gully Trap 125/110mm, setting and jointing with solvent cement,complete all as specified and directed by Engr-in-Charge. |
| 92 | S&F20 mm dia curtain rod of mild steel with decorative finish , with fixing brackets complete all as specified and as directed (two brackets per opening of door and window and 08 Nos PVC rings) complete all as specified and directed by Engr-in-Charge. |
| 93 | S&F rotational moulded polyethylene water storage tanks 1000 ltr (three layered) capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia ball brass valve, complete all as specified and directed by Engr-in-Charge. |
| 94 | S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe orunion, 20mm bore dia of pipe complete all as specified and directed by Engr-in-Charge. |
| 95 | S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints laidin trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 96 | S&F 110 mm bore PVC(SWR) bend any radius. Complete all as specified and directed by Engr-in-Charge. |
| 97 | S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engr-in-Charge. |
| 98 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr-in-Charge. |
| 99 | M&L for 20mm thick granite (of any type) til;es machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stoneincluding rinding and polishing complete all as specified and directed by Engr-in-Charge. |
| 100 | Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. |
| 101 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- |
| 102 | One light point controlled by one, one way switch |
| 103 | One fan point controlled by one, one way switch |
| 104 | One socket outlet 3 Pin, 5 Amp on independent board |
| 105 | M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FRLS) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board, complete all as specified and directed by Engr-in-Charge. |
| 106 | S&Fswitch piano flush type single pole one way 5 Amp, complete all as specified and directed by Engr-in-Charge. |
| 107 | S&Fswitch piano flush type single pole one way 15 Amp, complete all as specified and directed by Engr-in-Charge. |
| 108 | S&F socket out let 2 in 1, 3 pin 5 Ampflush type, complete all as specified and directed by Engr-in-Charge. |
| 109 | S&F socket out let 2 in 1, 3 pin 15 Amp flush type, complete all as specified and directed by Engr-in-Charge. |
| 110 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body, complete all as specified and directed by Engr-in-Charge. |
| 111 | S&F factory made sheet metal enclosure distribution board class IP-40 with 200 Amp rated copper bus bar 240 volts 2 way single pole and neutral link complete all as specified and directed by Engr-in-Charge. |
| 112 | Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface, complete all as specified and directed by Engr-in-Charge. |
| 113 | Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded aluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable withwhite of zie 23/0.0076, complete all as specified and directed by Engineer-In-Charge. |
| 114 | Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 09W, complete all as specified and directed by Engr-in-Charge. |
| 115 | S&F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engr-in-Charge. |
| 116 | S&F in repair LED bulk head fitting 10watt highly cost effective compact, ultra-low energy, modern design utility bulkhead suitable for indoor and outdoor applications with IP 65 protection Cart Par No LBH-10-CDL, complete with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076, complete all as specified and directed by Engr-in-Charge. |
| 117 | S&F LED Bldg security light fitting 35 watt housing made out of die cast aluminium alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40mm dia light grade GI pipe bend to shape, complete all as specified and directed by Engr-in-Charge. |
| 118 | S&F ceiling fans completed with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless directed current motor (BLDC). |
| 119 | S&F in repalcement Exhaust fans of 230 volt 300mm sweep ventilator DB bouble ball heavy duty motor, metal blade with proctection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES NO with black synthetic enamel paint 2.0 cm high complete all as specified and directed by Engr-in-Charge. |
| 120 | Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link, complete all as specified and directed by Engr-In-Charge. |
| 121 | Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:- |
| 122 | S&F of MCB, 10 to 32 Amp, SP, 240 Volt, complete all as specified and directed by Engr-in-Charge. |
| 123 | S&F of MCB, 25 to 32 Amp, SPN, 240 Volt, complete all as specified and directed by Engr-in-Charge. |
| 124 | M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductormulti-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-in-Charge. Note:- Three run of 6.00 Sqmm cableand one run of PVC Conduit shall be measured & paid as one unit). |
| 125 | S&F water heater storage type electric, capacity 25 Ltrs, BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including M&L for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces complete all as specified & directed by Engr-in-Charge. |
| 126 | M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
