Tender For Supply Of Spares For Esp System Of Unit# 1 To 4 Ctpp, Chhabra, chhabra-Rajasthan

Supply Of Spares For Esp System Of Unit# 1 To 4 Ctpp, Chhabra , Inner Arm Assembly For Cerm & Eerm Consists I ) Inner Arm Half-2 Nos. Ii ) Hex Bolt M16x90-1 Nos. ( Half Threaded, Grade 4.6 ) Iii ) Hex Bolt M16x40-1 Nos. ( Half Threaded, Grade 4.6 ) Iv ) Hex Nuts M16-2 Nos. ( Grade 4.6 ) ( Moc En-08 For Flats ) As Per Drawing / Sample , Outer Arm For Cerm ( Total Weight 8Kg+ / -2.5-5% ) I ) Roller Wheel- 1 No. Ii ) Arm-2 Nos. ( 10 Mm Thick Flat ) Iii ) Washer- 2 Nos. ( 45X28x3 Mm ) Iv ) Pin - 2 Nos. ( L114xdia25mm Round Bar ) As Per Drawing / Sample *Moc En-08 For Roller Wheel & Pin And Ms For Arms & Washers , Sleeve Bearing Bracket Assy. Consists I ) Sleeve Bearing / Ci Liner ( In Two Halves ) , C.I.Fg-210- 2Nos. Ii ) Ht Hex Nut+ Bolt M12x50- 2Nos. Iii ) Ms Strip ( 40X40x10 ) - 4 Nos. Iv ) Weld Type-6 ( Moc For Liner Set Is As Per Is-210 Fg-210 ) As Per Drawing / Sample , Set Ring ( Material En-08 ) Id-50+ / -0.5Mm , Od-75.0M, Height-18.00Mm Grub Screw, M10x15 Mm-2Nos. , Grip Coupling For Eerm ( Moc En-08 For Flat ) Consists Grub Screw M10x25 Mm -1 No. As Per Drawing / Sample , Shaft Sleeve 50 Ø Mm ( En-24 ) Inner Dia -50+ / - 0.5 Mm Outer Dia-70+ / - 0.5 Mm Length- 130+ / -1 Mm Thickness-10 Mm, , Shaft Sleeve 40.5 Ø Mm ( En-24 ) Inner Dia -40+ / - 0.5 Mm Outer Dia-50+ / - 0.5 Mm Length- 120+ / -1 Mm Thickness-5 Mm , Plain Bearing Assembly For Rapping Mechanism Consists I ) Lower Half-01 ( Is-210-Fg 200 ) Ii ) Upper Half -01 01 ( Is-210-Fg 200 ) Iii ) Hex Bolt M16x120 Mm-02 Nos ( 4.6 Grade Half Threded ) Iv ) Hex Nut M16 -02 Nos. ( 4.6 Grade ) *Casting Must Be Free Of All Kinds Of Casting Defects. , Top Sleeve For Emmiting Shaft Dia.40 Mm ( Material En-8 ) , End Shaft For Cerm Dia 50Mm Lenth : 790Mm Hole Dia 17Mm Material : En-8 As Per Drawing / Sample , Gd Screen Material As Per Is 513, Crca Sheet 2.5Mm ( As Per Drawing ) , Material Of Hook Ms, 4.00Mm Thick , Emitting Rapping End Shaft ( Material En-8 ) , Emitting Rapping Shaft I ( Material En-8 ) , Emitting Rapping Shaft Ii ( Material En-8 ) , Emitting Rapping Shaft Iii ( Material En-8 ) , C.I. Liner In Two Halves ( Moc As Per Is 210 Fg 210 ) , Shock Bar Guide Angle

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	04-01-2024	Date Extension-I	Date	18-01-2024
2	18-01-2024	Date Extension-II	Date	30-01-2024
3	30-01-2024	Date Extension-III	Date	12-02-2024

INR 590 /-

INR 32932.0 /-

INR 16.46 Lakhs /-