Military Engineer Services-MES has published Tender For Renovation Of Building No. P-360 (Barrel Shed) And P-578 At Pxe, Chandipur. Submission Date for this Tender is 24-02-2024. Building Work Tenders in chandipur Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Jan-2024 | Corri01 | Date | 18-01-2024 |
| 2 | 10-Jan-2024 | Corri02 | Date | 29-01-2024 |
| 3 | 19-Jan-2024 | Corri03 | Date | 03-02-2024 |
| 4 | 25-Jan-2024 | Corri04 | Date | 10-02-2024 |
| 5 | 31-Jan-2024 | Corri06 | Date | 12-02-2024 |
| 6 | 31-Jan-2024 | Corri05 | BOQ | 12-02-2024 |
| 7 | 01-Feb-2024 | Corri07 | Financial Bid | 12-02-2024 |
| 8 | 12-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-02-2024 |
| 9 | 19-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-02-2024 |
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete( un-reinforced) manually/ by mechanical means including disposal of material within 50 metre lead complete all as specified & directed. |
| 2 | M&L for 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4type B1(using 20 mm graded stone aggregate) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer"s instructions complete all as specified & directed. (This includes cost of cement slurry, but excluding the cost of nosing of steps etc.) |
| 3 | M&L for plinth protection 50 mm thick of cement concrete 1:3:6 type C1(using 20 mm graded stone aggregate) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth complete all as specified & directed. |
| 4 | M&L for 40 mm thick flooring in plain Cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete all as specified & directed. |
| 5 | M&L for precast reinforced cement concrete 1:1.5:3 type A1(using 20 mm graded stone aggregate) as in cover slab, string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including therequired formwork but , excluding cost of reinforcement complete all as specified & directed. |
| 6 | M&L for PCC 1:3:6 type C-1(using 20 mm graded stone aggregate) as in surface channel and drains etc. including finishing complete all as specified & directed. |
| 7 | Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metre lead complete all as specified & directed. |
| 8 | M&L for Brick work with common burnt clay with old sized bricksmachine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 complete all as specified & directed.. |
| 9 | M & L for Reinforced cement concrete 1:1.5:3 type A1 (using 20 mm graded stone aggregate)as in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement for bands and lintels etc. complete all as specified & directed.. |
| 10 | M&L for TMT Steel reinforcement of grade Fe-500D or more for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level complete all as specified & directed.. |
| 11 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metre leadcomplete all as specified & directed.. |
| 12 | M & L for 12 mm cement plaster in cement mortar 1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for 15 mm cement plaster in two coats in Cement Mortar 1:4 on the rough side of single or half brick wall of mix with integral water proofing compoundon external wall brick / concrete surfaces finished even and fair without using extra cement complete all as specified & directed.. Note:- Water proofing compound shall be measured & paid separately. |
| 14 | Supply only integral water proofing compound complete all as specified anddirected. |
| 15 | M & L for distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on newly plastered surfaces (two or more coats) over and including water thinnable priming coat with cement primer complete all as specified & directed.. |
| 16 | M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade onNew surfaces (Two or more coats applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) complete all as specified & directed.. |
| 17 | M&L for preparations of surfaces of old walls and distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade (one or more coats) complete all as specified & directed.. |
| 18 | M&L for complete removal of existing treatment and finishing walls surfaces with Premium Acrylic Smooth exterior paint with Silicone additives of required shade(Two or more coats applied @ 1.43 ltr/ 10 sqm) complete all as specified & directed.. |
| 19 | Dismantling Asbestos Cement sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metre lead complete all as specified & directed.. |
| 20 | Supply & fixing of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 MPa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as directed by Engineer in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as in roofing complete all as specified and as directed. |
| 21 | Dismantling G. S. Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metre lead complete all as specified and as directed. |
| 22 | Supply and fixing precoated galvanised steel sheet roofing accessories(plain ridges 600mm wide ), 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete all as specified and as directed. |
| 23 | Supply & fixing 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated "J" or "L" hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth complete all as specified and as directed. |
| 24 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metre lead (Steel gate and rolling shutter area exc. 3 Sqm complete all as specified and as directed. |
| 25 | M&L for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete all as specified and as directed. |
| 26 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead ( floor hearth) for thickness of tiles 10 mm to 25 mm complete all as specified and as directed. |
| 27 | M&L for rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on & including 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and as directed. |
| 28 | M&L for 1st quality ceramic glazed floor tiles 7 to 8 mm thick conforming to IS : 15622 of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over & including 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and as directed. |
| 29 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metre lead area n.exc 3 Sqm complete all as specified and as directed. |
| 30 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead complete all as specified and as directed. |
| 31 | Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frame for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings, as specified and directed. (Glazing & panelingto be paid for separately) |
| 32 | Supply & fixing of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutter of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, including Supply & fixing of hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required all complete as per architectural drawings, as specified and directed. (Glazing & panelingto be paid for separately) |
| 33 | Supply & fixing of anodised aluminium grill(wt not less than 2.07 Kg / Sqm)(anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,complete all as specified and as directed.. (Only weight of grill to be measured for payment). |
| 34 | Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips etc, complete all as specified and directed. |
| 35 | Supply & fixing of glazing with float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) in aluminium ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings as specified and directed . (Cost of aluminium snap beading & EPDM rubber / neoprene gasket not included) |
| 36 | Supply & fixing of glazing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings as specified and directede . (Cost of aluminium snap beading & EPDM rubber / neoprene gasket not included) |
| 37 | Dismantling G.I. pipes 15 mm nominal bore (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metre lead complete all as specified and directed. |
| 38 | Dismantling G.I. pipes 20 mm nominal bore (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metre lead complete all as specified and directed. |
| 39 | Supply & fixing of G.I. Pipes 15 mm dia nominal borecomplete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete all as specified and directed. |
| 40 | Supply & fixing of G.I. Pipes 20 mm dia nominal borecomplete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete all as specified and directed. |
| 41 | M&L for polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab of colourblack, cheery/ruby red or equivalent over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed. |
| 42 | M&L for laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through theauthorised applicator of the manufacturer of membrane including dismantling of existing treatment complete all as specified and directed. |
| 43 | M&L for 12 mm cement plasterin CM 1:4 onroof surface including taking down existing plaster complete all as specified & directed. |
| 44 | Dismantling C.I. or asbestos rain water pipe of 100 mm dia with fittings and clamps including stacking the material within 50 metre lead complete all as specified & directed. |
| 45 | Supply and fix 150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls/floors including necessary brackets clamps or laid in trenches complete all as specified and as directed. |
| 46 | Supply and fixing on wall face unplasticised Rigid PVC Single socketed110 mm dia rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed. |
| 47 | Supply and fixing on wall face unplasticised Rigid PVC Single socketed75 mm dia rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed. |
| 48 | Supply and fix 150mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 49 | Supply and fixing 110 mm on wall face following unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed.. |
| 50 | Bend 87.5° |
| 51 | Single Tee with door 110x110x110mm |
| 52 | Shoe 110 mm dia (plain) |
| 53 | Supply and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including Supply aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. with Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) complete all as specified and as directed. |
| 54 | M&L for painting with two coats of synthetic enamel paint of approved brand and to give an even shade on new work of steel surface complete all as specified and as directed. |
| 55 | M&L for painting with one or more coats of synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old surface complete all as specified and as directed. |
| 56 | Supplying and fixing rolling shutters of approved make, made of 80x1.25 mm M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of Supply and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of 1.25mm thickness for rolling shutters complete all as specified and as directed. |
| 57 | Supply and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer using flats 30x6mm for diagonal braces and central cross piece complete all as specified and as directed. |
| 58 | Supply and fixing 600 x 120 x 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete all as specified and as directed. |
| 59 | Supply and fixing PTMT Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms complete all as specified and as directed. |
| 60 | Supply and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete all as specified and as directed. |
| 61 | Disconnecting damaged overhead/terrace PVC water storage tank of 500 Ltr capacity from water supply line and removing from the terrace including shifting at ground level complete all as specified and as directed. |
| 62 | Supply, hoisting and placing on terrace (at all floor levels) 500 Ltrs capacity polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and as directed. |
| 63 | Supply, hoisting and placing on terrace (at all floor levels) 1000 Ltrs capacity polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and as directed. |
| 64 | Supply and fixing PTMT Ball cock 20 mm nominal bore, 120 mm long, weighing not less than 198 gms of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball complete all as specified and as directed. |
| 65 | Supply and fixing gun metal gate valve of 20 mm nominal bore with C.I. wheel of approved quality (screwed end) complete all as specified and as directed. |
| 66 | Supply and fixing PTMT stop cock 15 mm nominal bore, 86 mm long, weighing not less than 88 gms of approved quality and colour complete all as specified and as directed. |
| 67 | Supply and fixing PTMT stop cock 20 mm nominal bore, 89 mm long, weighing not less than 88 gmsof approved quality and colour complete all as specified and as directed. |
| 68 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and as directed. |
| 69 | Supply and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms complete all as specified and as directed. |
| 70 | Supply and fixing Range of two half stall urinals white vitreous china flat backof size 580x380x350 mm with 5 litre P.V.C. automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required complete all as specified and as directed. |
| 71 | Supply and fixing White Vitreous China wash basin of size 630x450 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including dismantling of old WHB complete all as specified and as directed. |
| 72 | Supply and fixing C.P. brass bib cock 15 mm nominal bore of approved quality conforming to IS:8931 complete all as specified and as directed. |
| 73 | Supply and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and as directed. |
| 74 | Supply and fixing PTMT grating of 125 mm nominal dia with 25 mm waste hole of approved quality and colour complete all as specified and as directed. |
| 75 | Supply and fixing PTMT towel rail 600 mm long with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete all as specified and as directed. |
| 76 | Supply and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms complete all as specified and as directed. |
| 77 | Supply and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge with & including GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), factory painted after bending including taking down existing false ceiling with ceiling board & frame of any description complete all as specified & directed. |
| 78 | M&L for use & waste of centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers and all attached work etc. complete all as specified and as directed. |
| 79 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metre lead complete all as specified and as directed. |
| 80 | Demolishing RCC work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metre lead complete all as specified and as directed. |
| 81 | Dismantling wood work in fillets, rails, trusses, purlins and rafters of sectional area below 40 sqcm including stacking the material within 50 metre lead complete all as specified and as directed. |
| 82 | Dismantling wooden boardings any description and thickness upto 10mm including stacking within 50 metre lead complete all as specified and as directed. |
| 83 | Dismantling PVC rain water/SWR 110mm dia PVC pipe with fittings and clamps including stacking the material within 50 metre lead complete all as specified and as directed. |
| 84 | Dismantling PVC rain water/SWR 75 to 80mm dia PVC pipe with fittings and clamps including stacking the material within 50 metre lead complete all as specified and as directed. |
| 85 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including brushing neat cement slurry with 3.0 kgs of cement per sqm all as specified and directed. |
| 86 | M&L for brick work with clay fly ash old sized brick of class designation 7.5 in superstructure above plinth level up to floor five level in cement mortar 1:6 complete all as specified and as directed. |
| 87 | M&L for Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified an as directed. |
| 88 | M&L for drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce upto and including 12mm dia steel bars for sunshades/balconies/lintel including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, complete all as specified and as directed. |
| 89 | M&L for 6mm thick in cement plaster of mix 1:3 (1 cement : 6 fine sand) on ceiling surfaces finished even and smooth w/o using extra cement complete all as specified and as directed. |
| 90 | M&L for 10mm thick double charged vitrified floor tiles of size 800x800mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and as directed. |
| 91 | M&L for 10mm thick Double Charged Vitrified tiles of size 800x800mm, with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and as directed. |
| 92 | M&L for 7 to 8mm thick (square/rectangular) Ceramic glazed floor tiles of size 300x300 mm or more of 1st quality conforming to IS : 15622, of approved make, in all colour shades, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and as directed. |
| 93 | M&L for polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red as in flooring, skirting/riser of staircase/steps in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 94 | M&L for 18-20mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) complete all as specified and as directed. |
| 95 | M&L for Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete all as specified and as directed. |
| 96 | M&L for 12 mm thick prelaminated particle board with decorative lamination both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings, specified and as directed. |
| 97 | M&L for 6mm thick coloured toughened glass pane in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawings, specified and as directed.(Cost of aluminium snap beading & EPDM rubber / neoprene gasket not included) |
| 98 | M&L for Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete all as specified and as directed. |
| 99 | M&L for powder coated (min thick of coating 50 micron) aluminium round shape handle of outer dia 100 mm with SS screws etc. complete all as specified and as directed. |
| 100 | M&L for factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete all as specified and as directed. |
| 101 | M&L for factory made 30mm thick plain panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC "C" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the "C" Channel using PVC solvent adhesive etc. complete as per direction, manufacturer"s specification & drawing. |
| 102 | M&L for stainless steel butt hinges 125x64x2.50 mm size (heavy weight) IS : 12817 marked with stainless steel screws etc. complete all as specified and as directed. |
| 103 | Supply and fixing of aluminium handles, 100mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed. |
| 104 | Supply and fixing of aluminium tower bolts, 250x10mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed. |
| 105 | Supply and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer complete all as specified and as directed. |
| 106 | M&L for steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required as in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, complete all as specified and as directed. |
| 107 | M&L for steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required as in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete all as specified and as directed. |
| 108 | S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 109 | M&L for structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete all as specified and as directed. |
| 110 | M&L for structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete all as specified and as directed. |
| 111 | M&L for stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, complete all as specified and as directed.(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 112 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make , 50mm average thickness, including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete all as specified and as directed. |
| 113 | M&L for mixing and applying bonding coat of approved Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make on chipped portion of RCCcomplete all as specified and as directed. |
| 114 | M&L for SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket50mm thick in Grade M 25 with cement content not less than 330 kg per cum for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary Portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member complete all as specified and as directed. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) |
| 115 | M&L for Water proofing treatment of RCC sunshade with Zycosil or equivalent water proofing Solution (1 litre of Zycosil or equivalent & 20 litres of water stirred first & 2 litres of Zycoprimeor equivalent added and stirred (total 23 litres)) till it meets the saturation level and testing as per RILEM or by water drops test in which water drops do not absorb but drops remain or rolls complete all as specified and as directed. |
| 116 | M&L for removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and as directed. |
| 117 | M&L forapplying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the new/old plastered wall surface to prepare the surface even and smooth complete all as specified and as directed. |
| 118 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, with & including 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit including taking down existing false ceiling complete all as specified and directed. |
| 119 | M&L for cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) excluding the cost of centering and shuttering in all work up to plinth level complete all as specified and as directed. |
| 120 | M&L for making connection of G.I. distribution branch with G.I. main of 25 to 40mm nominal boreby providing and fixing tee, including cutting and threading the pipe etc. |
| 121 | S&F 20mm nominal dia pipe Chlorinated Polyvinyl Chloride (CPVC) pipes on exposed surface of wall , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete all as specified and as directed. |
| 122 | S&F 15mm nominal dia pipe Chlorinated Polyvinyl Chloride (CPVC) pipes in concealed work, including cutting chases and making good the surface of wall , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete all as specified and as directed. |
| 123 | M&L for chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with medium shade pigment using 50% white cement 50% Grey cement to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 complete all as specified and as directed. |
| 124 | M&L for 25mm thick cement concrete of 1:2:4type B1(using 20 mm graded stone aggregate) as in sub base to received tile complete all as specified and as directed. |
| 125 | S & F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 126 | Dismantling W.C. Pan of all sizes including all fittings and disposal of dismantled materials including malba all complete as per directions of Engineer-in- Charge. |
| 127 | M&L for White Vitreous china Orissa pattern W.C. squatting pan (Indian type) of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and as directed. |
| 128 | M&L for white vitreous china flat back half stall urinal of size 580x380x350 mm with 5 litre white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required including dismantling of old urinal with all fittings complete all as specified and directed. |
| 129 | Supply and fixing in repairs 15mm nominal bore C.P. brass angle valve of approved quality conforming to IS:8931 complete all as specified and as directed. |
| 130 | Supply and fixing in repairs 15mm bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 complete all as specified and as directed. |
| 131 | Supply and fixing 15mm nominal bore with 45cm length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour complete all as specified and as directed. |
| 132 | M & L for 75mm dia outlet PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 133 | S&F and fixingABS (Body) health faucet with flexible tube upto 1 metre long with necessary fixing arrangement complete all as specified and as directed. |
| 134 | Supply and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms complete all as specified and as directed. |
| 135 | Supply and fixing in repair 150mm dia C.P. brass shower rose with 15 or 20 mm inletcomplete all as specified and as directed. |
| 136 | M&L for water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound complete all as specified and as directed consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 137 | Supply and fixing square-mouth S.W. gully trap class SP-1 of size 150x100mm P typewith C.I. grating brick masonry chamber with clay fly ash old sized (non modular) bricks of class designation 7.5 complete with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design and as directed including demolishing of existing complete all as specified and as directed. |
| 138 | Taking down carefully copper/aluminium point wiring including sunken MS Boxes (Light, Fan, socket or power) complete, (fitting such as switches, ceiling roses, call bell. pendants, regulators, socket etc) by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified and directed. |
| 139 | M&L for point wiring for light point/fan point/exhaust fan point/call bell point with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit medium duty for concealed wiring, MS sheet metal switch Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board with 5/6 A piano switch flush type one way 240 V and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface all as specified anddirected. |
| 140 | M&L for power socket wiring for 05/15 A Independent switch socket board with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 2x4 Sqmm, with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 1x4 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty for concealed wiring including all necessary wall cutting and making good disturbed surface complete all as specified and directed. Note:- Three runs of 4 Sqmm cable & one run of conduit shall be measured for payment as one unit. |
| 141 | S& F metal boxes of size 150 mm x 100 mm x 60mm deep of thickness 1.2mm on surface or recess with suitable size of phenolic laminated sheet cover of thickness 3mm in front including painting and making good of good disturbed surfaces complete all as specified and directed. |
| 142 | S& F metal boxes of size 180mm x100mmx 60mm deep of thickness 1.2 mm on Surface or recess with suitable size of phenolic laminated sheet cover of thickness 3mm in front including painting and making good of good disturbed faces complete all as specified and directed. |
| 143 | S&F switch 5/6 Amps piano type 240 Volt complete all as specified and directed. |
| 144 | S&F Socket outlet 3 in 1, 5 pin, 5 Amps flush type 240 Volt complete all as specified and directed. |
| 145 | S&F Socket outlet 5 in 1, 3 pin, 15/16 amps flush type 240 Volt complete all as specified and directed. |
| 146 | S&F switch 15/16 Amps piano type 240 Volt complete all as specified and directed. |
| 147 | S&F Ceiling rose 5A, 3 terminal PVC/poly carbonate isolated body on existing junction box including connection sets complete all as specified and directed. |
| 148 | Supply and fixing of Step type electronic regulator fluse type on the existing phenolic laminated sheet etc complete all as specified and directed. |
| 149 | Taking down unserviceable sub main Sub circuit wiring of any type and size including conduit/batten wiring for necessary repair/replacement complete all as specified and directed. |
| 150 | M&L for Sub main wiring using two runs of FRLSH grade PVC insulated, unsheathed, stranded. copper conductor cable of size 2.5 Sqmm and one run of 2 5 Sqmm FRLSH grade PVC suitable, unsheathed, stranded, single core, copper wire to be drawn in and including atPVC Conduit (medium grade) in Concealed wiring of suitable size complete all as specified and directed. Note:- Three runs of 2.5 Sqmm cable & one run of conduit shall be measured for payment as one unit. |
| 151 | M&L for Sub main wiring using two runs of FRLSH grade PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm and one run of 4 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including25 mm size PVC Conduit (medium grade) concealedcomplete all as specified and directed. Note:- Three runs of 4 Sqmm cable & one run of conduit shall be measured for payment as one unit. |
| 152 | M&L for Sub main wiring using 4 runs of FRLSH grade PVC insulated, unsheathed stranded copper conductor cable of size 10 Sqmm and 2 runs of 10 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including PVC Conduit (medium grade) concealed of suitable sizeall as specified and directed. Note:- Six runs of 4 Sqmm cable & one run of conduit shall be measured for payment as one unit. |
| 153 | Supply and fixing Highly robust industrial Box type LED extruded Batten type indoor decorative type luminaire suitable for LED Tube 2 x 20 watt (4 feet ) including LED tube rod 20 watt complete with all accessoriesinternally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. |
| 154 | Supply & Fixing in repairs Rectangular LED Floodlight made up off pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses along with IP66 protection high performance aluminium housing 150 watt complete all accessories necessary fitting including connection of 1.5 Sqmm copper conductor cable PVC insulated unsheathed 1100 volte grade, testing after mounting for proper function complete with taking down old unserviceable light fitting all as specified and directed. |
| 155 | Supply & Fixing roundHighbay LED luminairin PDC housing suitablefor Industrial application with IP66 protection high performance aluminium housing of 120 Watt with luminair efficiency upto 150LmW complete with all accessories necessary fitting including connection of 2.5 Sqm copper conductor cable PVC insulated unsheathed 1100 volts grade, ceiling rose PVC flexible conduit complete including taking down old unserviceable light fittings all as specified and directed. |
| 156 | Supply & fixing in repair building Security light fitting, authentically designed roadway luminiare with heat resistant excellent thermal management with IP 66 protection powder coated pressure die cast housing compact high power LED street light with toughened glass with lens of capacity 30 Watt includingprovn of necessary connection complete all as specified and directed. |
| 157 | Supply and fixing in repair of GI pipe bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 No. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. |
| 158 | Supply and fixing of Wall mounted/ Air Circulator fan of 600 mm sweep, single phase 50 Hz, 240 volts, 3 blade, high speed with fittings/connections complete all as specified and directed. |
| 159 | Taking down serviceable / unserviceable switch fuse /MCB DB/TPN DB etc for necessary repair/replacement and reuse complete all as specified and directed. |
| 160 | S&F MCB DB double door made of sheet steel phosphatised powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way 240 Voltsfixed in wall , making good disturbed surfaces, including taking out old DB with fitting & fixtures complete all as specified and directed.. |
| 161 | S & F horizontal type three pole and neutral (TPN) sheet steel, MCB distribution board, 415 V, 4 way (4 + 12) double door on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection powder painted including earthing etc as required ( but without MCB/RCCB, isolator) including making good disturbed surfaces including taking down old unserviceable, complete all as specified and directed. |
| 162 | Supply and fixing of surface/recess mounting vertical type, 415 volt TPN MCB 4 way (4 + 12) double door distribution board of sheet steel, dust protested duly powder painted, inclusive of 200 amps tinned copper bus bar common neutral link, earth bar., din bar for mounting MCBs (but without MCBs and incommer ) as required (Note Vertical type MCB TP DB is normally used where 3 phase outlets are required) including taking down old DB and making disturbed surface good to match the existing surface complete all as specified and directed. |
| 163 | Supply and fixing of 200 A, 4 pole, 36 KA, FP MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connection etc, complete all as specified and directed. |
| 164 | Supply and fixing of 63 A, TP 16 KA, 415 volts MCB complete with connection testing and commissioning etc as required complete all as specified and directed. |
| 165 | S&F40 A rating 240V, 10 KA "C" curve miniature circuit breaker SPNcomplete with connection testing and commissioning etc as required all as specified anddirected. |
| 166 | Disconnecting electrically and dismantling of ceiling fans of any make capacity and type, washing thoroughly of bearing /bush, fan blades and body of fan by kerosene /petrol etc andgreasing for smooth functioning, replacement of worn out/defective unserviceable parts (where ever necessary), reassembling the same including provision of new three core flexible copper wire 1.5m long, including one coat ofsynthetic enamel paint (first quality) with super glossy finish to fan body and blades refixing the same to its original position including testing complete all as specified anddirected. (NOTE : Replacement of worn out/ defective/unserviceable parts, flexible copper wire and rewinding included in this quoted rateand not paid separately under relevant items of these schedule). |
| 167 | S&F 5 A to 32 A rating, 240V/415 V, 10 kA "C" curve miniature circuit breaker SP suitable for inductive load in the existing MCB DB Complete with connection testing and commissioning etc as required all as specified anddirected. |
| 168 | M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm buried directly in ground connected to galvanized earth lead strip of size 25 mm x 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron including 40mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe light grade 20mm dia, charcoal and common salt in alternative layers of 15 cm compacted thickness all around the electrode with concrete earth pit with PCC type C1 , 1:3:6 (using 20 mm graded stone aggregate),50mm thick precast RCC type B1, (1:2:4)(using 20 mm graded stone aggregate) pit cover reinforced with 8mm dia deformed bar and suitable handle made of 10mm dia round bar including galvanised strip of size 25mm x 4mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No.3 of SSR Part-I, 2009 and all as directed including taking down old unserviceable one. Note :Cost of Main earthing lead from earth electrode to test point upto 7.5 meter is included in the quoted rate. |
| 169 | Supply and laying 25 x 4 mm Gl strip at 0.5 mtr below ground as strip earth electrode., including connection/ terminating with Gl nut bolt, spring washer etc as required (joining shall be done by overlapping and with 2 sets of GI nut bolts & spring washer spaced at 50 mm) complete all as specified and directed. |
| 170 | S& F metal boxes of size 150 mm x150 mmx 60mm deep of thickness 1.2mm on surface or recess with suitable size of phenolic laminated sheet cover of thickness 3mm in front including painting and making good of good disturbed surfaces |
| 171 | Supply and fixing call bell/buzzer suitable for single phase, 230 volts complete all as specified & directed. |
| 172 | S&F Bell push complete all as specified & directed. |
| 173 | S&F brass batten/angle holder including connection etc complete all as specified & directed. |
| 174 | M&L Sub main wiring usingfour runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 6.0 Sqmm and two run of 6.0 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and includingat least 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size complete all as specified & directed. Note:- Six runs of 6 Sqmm cable & one run of conduit shall be measured for payment as one unit. |
| 175 | S&F 12 way double door, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface, recess complete with tinned copper bus bar neutral bus bar earth din bar, interconnections powder painted including earthing etc.(but without MCB/RCCB/Isolator) complete all as specified & directed. |
| 176 | Supply and fixing 100 A, 16 KA TP MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connection etc complete all as specified & directed. |
| 177 | S & F 5A to 32 A rating, 240V/415 V, 10 kA "C" curve miniature circuit breaker single pole and neutral suitable for inductive load of following poles in the existing MCB DB complete with connection testing and commissioning etc complete all as specified & directed. |
| 178 | Supply and fix LED tube light fitting 1x20 Watt with high efficacy >=115 lm/W in aluminium housing, compact batten suitable for single tube complete with all accessories complete all as specified & directed. |
| 179 | Supply and fix LED tube light fitting 2x20 Watt with high efficacy >=115 lm/W in aluminium housing, compact batten suitable for single tube complete with all accessories complete all as specified & directed. . |
| 180 | Supply and fix LED tube light fitting 10 Watt, 2 ft LED batten with powdered coated aluminum housing & integrated electronic driverincluding taking down old fitting complete all as specified & directed. |
| 181 | S&F in repairLEDBldg security light fitting 45 Watt with all accessories, (with extra driver) attractively styled high pressure die cast housing acting as a heat sink housingepoxy powder coated in dark graphite greycolour suitable for mounting bracket of 40mm bore GI pipe light gradecomplete with all accessoriesincludingtaking down old fitting complete all as specified & directed. |
| 182 | Supply and fix down rod suitable forhanging of tube light fitting from roof/ceiling/wall with walve edge with check nut and meet to existing length complete all as specified and directed . |
| 183 | Supply, laying,connecting and testing XLPE cable insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sq mm 3.5 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories including excavation, removing and refilling the trench etc as required but excluding sand cushioning and protective covering complete all as specified and directed . |
| 184 | Supplying and filling sand intrenches as cushion for cableincluding , ramming, consolidating and dressing complete all as specified and directed . Note: Punned thickness shall be measured for payment purpose> |
| 185 | Supply and laying common burnt clay old sized (non modular) bricks class designation 7.5laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and directed . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
