Public Works Department-PWD has published Tender For Improvement And Repairs To Cottages C1 C2 At Government Rest House Monte Margao In Margao Constituency. Submission Date for this Tender is 04-01-2024. Building Repair Tenders in South Goa Goa. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 21-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-01-2024 |
Sl. No. | Item Description |
1 | Demolishing laterite stone masonry in cement mortar including stacking of serviceablematerial& disposal of unserviceable material within 50 mts. lead. |
2 | Demolishing brick work in cement mortar including stacking of serviceablematerial& disposal of unserviceable material within 50 mts. lead. |
3 | Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50 mts. lead. |
4 | Taking out doors, windows and clerestory windowsshutters (steel or wood) includingstacking within 50 mts. Lead |
5 | Of area 3 sq.m. and below |
6 | Dismantling the tile workin floors and roofslaidin cement including stacking of materials within50 meters lead for thickness of tiles 10mm to 25mm. |
7 | Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead. |
8 | Dismantling G.I. orasbestos rain water pipes with fittings and clamps including stacking the material within 50 mts. lead. 75mm to 150 mm dia. |
9 | Half brick masonry in cement mortar 1:4 (1 cement :4 coarse, sand)with bricks of class designation 40 kg/ sq. cm upto floor five level. |
10 | Upto floor V level. |
11 | Lateritemasonry in neatly dressed stones for 23 cms thick masonry walls in cm. 1 : 5 (1 cement : 5 coarse sand) in foundation uptoplinth level |
12 | Lateritemasonry in neatly dressed stones for 23 cms thick masonry walls in cm. 1 : 5 (1 cement : 5 coarse sand) in foundation uptoplinth level. Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level. |
13 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
14 | Providing and laying in position cement concrete 1:2:4(1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost ofcentering,shuttering and finishing : |
15 | All works upto plinth level |
16 | Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed ofcement mortar 1:3 and jointed with cement slurry complete. |
17 | Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. |
18 | Wall Ceramic Glazed Tiles : 300 x 600 |
19 | Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria(thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete |
20 | Dark Shades |
21 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws |
22 | 600 x 20 mm size |
23 | Providing and fixing toilet paper holder : |
24 | C.P. brass |
25 | Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws |
26 | Glass container |
27 | Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw |
28 | Providing and fixing brass stop cock (heavy) of approved quality : |
29 | 15 mm nominal bore |
30 | Providing and fixing brass full way valve(heavy) duty with wheelof approved quality : |
31 | 20 mm nominal bore |
32 | Providing and fixingP.V.C. connection pipe with brass unions 15 mm nominal bore: |
33 | 45 cm (18”) length . |
34 | Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet: |
35 | 100 mm diameter. |
36 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming toI S 12701; 1996. |
37 | 500 lit. capacity |
38 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. |
39 | Inside size 60 x 60cmand 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
40 | Constructing soak pit 1.20m x 1.20m x1.20m filled with laterite stone aggregate 125 to 180 mm including S.W. drain pipe 100 mm diameter and 1.2m. long complete as per standard design. : |
41 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes ofapproved including lubricant etc. complete (single/double) socketed: |
42 | 110 mm dia |
43 | 75 mm dia |
44 | Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend withdoor : |
45 | 110 mm dia |
46 | 75 mm dia |
47 | Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricatingetc. complete, without door: |
48 | 110 mm dia |
49 | 75 mm dia |
50 | Providing and fixingU.P.V.C. pipeclips (approved make ) for S.W.R. pipes: |
51 | 110 mm dia |
52 | 75 mm dia |
53 | Providing and fixing R.P.V.C. vent cowl: |
54 | 110 mm dia |
55 | 75 mm dia |
56 | Providing and fixing nahani trap ofrigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : |
57 | 110 mm dia |
58 | Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993 |
59 | 15 mm nominal bore |
60 | Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993 |
61 | 15 mm nominal bore |
62 | Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mmJaquar make or equivalent. Confirming to IS 8931;1993 |
63 | 15mm nominal bore |
64 | Providing and fixing NICKEL chrome plated copper alloy Fancy wall mixer with 3 IN 1 SYSTEM WITH 115MM long bend pipe for connection to over head shower Jaquar make or equivalent. Confirming to IS 8931;1993 |
65 | Providing and fixing NICKEL chrome plated copper alloy Fancy TELEPHONIC SHOWER 1.5M FLEXIBLE TUBE WITH SWINGING WALL HOOK Jaquar make or equivalent. Confirming to IS 8931;1993 |
66 | Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993 |
67 | Providing and fixing NICKEL chrome plated copper alloy Fancy waste coupling 32 mm with 190 mm long connection pipe wall flanceJaquar make or equivalent. Confirming to IS 8931;1993 |
68 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. |
69 | 20 mm dia nominal outer dia pipes. |
70 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. SCH-40(blue)/(white) |
71 | 20mm outer dia. |
72 | 40mm outer dia. |
73 | Proving and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support - W.C. Pan with white plastic seat and lid |
74 | Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete. |
75 | Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards. |
76 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
77 | Providinganti – termitetreatment tobuildingsconforming to I.S.S. 6113 part II 1971 (revised) including adoptingprecautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicatingany infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. |
78 | Post construction |
79 | FRP (Fiber Reinforced Polymer) Frames with WoodFinish Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company. Specified Cross Sectionb) 4” x 2” |
80 | Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps)and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade BlockBoard. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certifiedfactory. Accessories: i) S. S. Hinges 4”- 3 Nos ii) S. S. Latch- 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5”- 2 Nos |
81 | Shutter Thickness :35mm |
82 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
83 | Providing & fixing in position fixed glass for shower partition with 10mm toughened clear glass on patch fittings in SS 316 grade, Reinforcement bar, silicone sealant Complete. |
84 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
85 | Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
86 | Providingand fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, and cross "T" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main "T" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings etc. complete. |
87 | (As Directed by Engineer in Charge) Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection>85% non-combustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC. Hospitals, Offices and Commercial Buildings, Auditoriums and Cinema Hall, Educational Institutions, R&D Centers, Studios, Laboratories, Library, Canteen. |
88 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
89 | Removing old loose bottom or side cover of RCC slab, beam, columns etc. rubbing surface of concrete steel using wire brush and applying 2 coats of Alkaline rust converting primer (Feovert) after a waiting time of 6 hrs between coats and then applying another anti corrosive protective coating system ) for reinforcement bars (IPNet-RB) Conforms to IS-2770 Part-1 (Pull out Test) ASTM-3963-86 (Adhesion Test) and then applying concrete penetrating corrosion inhibitor (EPCO-KP100) and applying bonding new to old concrete (Epibond) Conforms to ASTM-C-882-87 and plastering on the fresh bond coat with Polymer Modified Mortar (Monobond) with 20mm C.M 1:3 and finishing coat of 6mm C.P 1:3 (1 Cement : 3 Sand ) incl. cost oftransport etc. as per dir of EIC.All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. |
90 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
91 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
92 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
93 | Wall painting(two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
94 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
95 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
96 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. |
97 | Second class Indian teak wood |
98 | Providing and fixing 50 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with necessary screws: |
99 | Second class Indian teak wood |
100 | Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with necessary screws: |
101 | Second class Indian teak wood |
102 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
103 | Dismantling tiledroofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
104 | Providing & fixing 12 mm thick & 100 mm wide pelmet with 25 mm diameter, wooden curtain rod and bracket including fixing within 25 x 3 mm flat 10 cm long and plugs etc. complete. |
105 | Second class Indian teak wood |
106 | Providing and fixing curtain rods of 1.25 mm thick anodized aluminium plates brackets in pelment instead of wooden curtain rods of 25 mm diameter and brackets (actual length of rods to be measured). |
107 | 12 mm dia. |
108 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. |
109 | 40 x 3 mm flat iron hold fast, 15 cm long |
110 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. |
111 | Ornamental grill |
112 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) |
113 | In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level |
114 | Centering & shuttering including Strutting, Propping & removal of forms for : |
115 | Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
116 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm |
117 | Jet Black |
118 | Melamine polishing on wood work (one or more coat) |
119 | Glossy |
120 | Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats.Fix fiber mesh while the first coat is still tacky.Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC.All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent |
121 | Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete. |
122 | Providing and fixing M.S. pressed butt hinges bright finished with necessary screws etc. complete. |
123 | 125 x 65x 2.12mm |
124 | Providing & fixing Stainless Steel tubular lever D-Type mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete |
125 | Providing and fixing M.S. tower bolts (barrel type) with necessary screws etc. complete |
126 | 200 x 10 mm |
127 | Providing & fixing ms. Sliding door bolts bright finished or and black enamelled with nuts and screws etc. complete |
128 | 250 x 16 mm |
129 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
130 | Providing and fixing 12 mm sheets flat pressed three layered melamine faced prelaminated wood based particle board bonded with BWP/BWR exterior grade synthetic resin panelling / cladding as for wall panelling / cladding as per IS-3087 (1985) type I one side approved shade and other side balancing white lamination of Novapan make or equivalent to be fixed to frames by cleates, leaving expansion allowance of 6 MM in between each panel. The width of the panel can be 1.5 feet/2 feet/3 feet as per Architects discretion. |
131 | Second class teak wood. |
132 | Providing and supplying Single Seater Sofa made of hardwood frame with armrest on either side having vertical spring filled with thick nylon thread for seat & back having 3" thick u Foam for back cushion & 4" thick for seat cushion with full upholostery complete etc as per the directions of the Engineer in charge. Basic rate of Cloth Rs.500/- Per Mtr. |
133 | Providing and supplying Three Seater Convertible Sofa cum bed made of hardwood frame with armrest on either side having vertical spring filled with thick nylon thread for seat & back cushion having 3" thick u Foam for back & 4" thick for seat with full upholostery complete etc as per the directions of the Engineer in charge. Basic rate of Cloth Rs.500/- Per Mtr. |
134 | Providing and supplying Coffee Table with Glass Top 0.90m x 90 top made of teakwood Frame work having 8mm thick clear glass with beveling for top with teakwood legs finished in melamine polish finish complete etc as per the directions of the Engineer in charge. |
135 | Providing and supplying sofa side Table with Glass Top 0.45m x 0.45m x 0.45m top made of teakwood Frame work having 8mm thick clear glass with beveling for top with teakwood legs finished in melamine polish finish complete etc as per the directions of the Engineer in charge. |
136 | Providing and making of teakwood chair of 22" W x 22" D x 36" H with 2" thick seat having finished in upholostery With legs of 2" x 2" teakwood section as per design back rest to be made of 2 1/2" x 2-1/2" wooden section and to be finished in melamine polish finish complete etc as per the directions of the Engineer in charge. |
137 | Providing & supplying wardrobe of 1000mm x 2100mm x 600mm made of 19mm thick marine block board having external in 4mm thick teak veneer finished in melamine polish finish with internal having two open shelves, and one utility drawer with lock, one SS rod to receive cloth hanger, including necessary hardwares such as SS door hanles, locks, tower bolts, door hinges complete etc and internal to be finished in french polish finish complete etc as per the directions of the Engineer in charge. |
138 | Providing & making of single bed with box storage having made of 19mm thick marine block board finished in 4mm thick teak veneer with 3" recessed skirting finished in melamine polish finish with internal hardwood framing as to support the top ply of 12mm thick and internal to be finished in french polish finish including head board upto 35" made of 19mm thick marine block board having finished in 4mm thick teak veneer of approved shade & design with teakwood beading on edges and to be finished in melamine polish finishing complete etc as per the directions of the Engineer in charge. |
139 | Providing & Supplying Bed Side Table 0.45m x 0.45m x 0.45m made of 19mm thick marine block board having outsurface finished in 4mm thick veneer comprising of two drawers with necessary hardwares such as telescopic drawer channel, handles, complete etc and to be finished in melamine polish finish and to be internal to be finished in french polish finish complete etc as per the directions of the Engineer in charge. |
140 | Providing & supplying Mattress 0.90m x 2.0m x 0.15m having 50mm thick u foam and 100mm choir (Kurl-on, Sleepwell make or equivalent) with quilting above including complete etc as per the directions of the Engineer in charge. |
141 | Providing and supplying Pillows of Kurl-on/ Sleepwell Make or equivalent make complete etc as per the directions of the Engineer in charge. |
142 | Supplying & fixing of single bedsheets of bombay dyeing or equivalent make with pillow covers complete etc as per the directions of the Engineer in charge. |
143 | Providing & supplying Luggage Rack of 0.90m x 0.50m x 0.50m made of 19mm thick marine block board having finished in 4mm thick veneer of approved shade and design having with back 6mm thick marineply cladded with veneer and to be finished in melamine polish finish complete etc as per the directions of the Engineer in charge. |
144 | Providing & making desk table having made of 19mm thick marine block board having finished in teakveneer of 4mm thick made as per design with one drawer and one openable shutter including necessary hardwares such as telescopic drawer channels, handles, lock complete and external to be finished in melamine polish finish & internal to be finished in french polish finish complete etc as per the directions of the Engineer in charge. |
145 | Providing and fixing in position curtain (4ft x 5ft):- Diving curtain should be made of bioactive fabric, anti microbial effect with 100% polyester. Including powder coating channel complete etc as per the directions of the Engineer in charge. |
146 | Providing & supplying wall mounted dressing unit with mirror 0.60m(W) x 1.20m(H) made of 19mm thick marine block board having external in 4mm thick teak veneer finished in melamine polish finish with table top and one utility drawer with lock, including necessary hardwares such as SS door handles, locks, drawer rail complete etc and internal to be finished in french polish finish complete etc as per the directions of the Engineer in charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail