Military Engineer Services-MES has published Tender For Repair To Flooring Tiling Plastering Plumbing And Joinery And Roof In Dcp Pocket And Mes Colony Under Ge Panaji. Submission Date for this Tender is 09-01-2024. Shed Construction Tenders in panaji Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-01-2024 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame ) area not exceeding 1.5 sqm each complete all as specified and directed. |
| 2 | Taking down chowkhat with shutter(without taking off shutter from the frame) area exceeding 1.5 sqm but not exceeding 4 Sqmeach complete all as specified and directed. |
| 3 | Taking down shutter of any description exceeding 1 sqm but not exceeding 2sqm each etc complete all as specified and directed. |
| 4 | Supply and Fix 2nd Class H.W. plain solid straight chowkhat & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints complete all as specified and directed. |
| 5 | Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC"C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drgs in SSR Pt II |
| 6 | Supply and Fix for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tubein opening as per specification and drawing complete all as specified and directed. |
| 7 | Supply and Fix for 35mm thick Plain framed panelled shutter with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated complete all as specified and directed. |
| 8 | Supply and Fix for 35mm thick 2nd class H.W Glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified in SSR Part I section clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed. |
| 9 | Supply and Fixpower coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 10 | Supply and Fix for Power coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 11 | Supply and Fix aluminium grills DG-104 of Deco Grill/ Hindal 10 mm thick diamond shape with aperture 7.5cm for windows complete all as specified and directed. |
| 12 | Supply and Fix Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixed in repair to existing shutters of any description complete all as specified and directed. |
| 13 | Supply and Fix Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixed complete all as specified and directed. |
| 14 | Supply and Fix sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm each pane 4mm thick complete all as specified and directed. |
| 15 | Supply and Fixfigured glass pin head type glazed with oil putty in squrenot exceeding 0.5 sqmin each pane 4mm thick complete all as specified and directed. |
| 16 | Supply and Fix butt hinges, medium weight cold rolled mild steel and fixed 100mm long complete all as specified and directed. |
| 17 | Supply and Fix aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long complete all as specified and directed. |
| 18 | Supply and Fix aluminium handles cast type anodised 150mm long complete all as specified and directed. |
| 19 | Supply and Fix for aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long complete all as specified and directed. |
| 20 | Material and Labour for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed. |
| 21 | Taking down cement plasteron brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 22 | Material and Labour for 10 thick internalplastering on fair faces of bricks or concrete surfaces finished even and smooth without using extra cement in CM1:6 complete all as specified and directed. |
| 23 | Material and Labour for 15mm thick external plastering in CM (1:4)on fair faces of bricks or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 24 | Material and Labourfor 10mm thick plastering on fair faces of bricks or concrete surfaces finished even and smooth without using extra cement in CM 1:3 complete all as specified and directed. |
| 25 | Material and Labour for preparing of new plastered surface of wall and applying two coats of Oil Bound Distemperon walls complete all as specified and directed. |
| 26 | Material and Labour for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of Oil emulsion distemper complete all as specified and directed. |
| 27 | Material and Labour for preparing of new surface of plaster and applying three coats of white wash on ceiling complete all as specified and directed. |
| 28 | Material and Labour for preparing of new surface of wall and applying twocoatsof cement base paint complete all as specified and directed. |
| 29 | Demolition of cement concrete (unreinforced) concrete in ground floors and pavingnot exceeding 15cm thickness( below or above ground floors.) complete all as specified and directed. |
| 30 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 31 | Material and Labour for cement concrete 1:2:4 (type B1)using 20mm graded stone aggregate 25mm thick as in flooring etc. complete all as specified and directed. |
| 32 | Material and Labour for non-skid ceramic coloured designer pattern tiles 400x400mmx7mm thick in floors etcset jointed in neat cementslurry and pointed in white cement or coloured cement to match etc including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 33 | Material and Labour for glazed ceramic coloured designer pattern tiles 450mmx 300mmx7mm thick on vertical surface such as skirt, Dado etc set and jointed in white colour cement including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed. |
| 34 | Material and Labour forcement concrete 1:2:4 (type B1) using 20mm graded stone aggregate 50 mm thick as in flooring etc. complete all as specified and directed. |
| 35 | Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore complete all as specified and directed. |
| 36 | All as per Item No. 35 above but for 20mm bore |
| 37 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 38 | All as per Item No. 37 above but for 25mm bore |
| 39 | Supply and fixing in CPVC 20mm Brass Elbow complete all as specified and directed. |
| 40 | Supply and fixing in CPVC 20mm Brass Tee complete all as specified and directed. |
| 41 | Supply and fixing in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 42 | Supply and fixing in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed. |
| 43 | Supply and fixing in CPVC 25mm Tank Adaptor complete all as specified and directed. |
| 44 | Supply and fixing in CPVC 20mm Ball valve complete all as specified and directed. |
| 45 | Supply and fixing in CPVC 25mm Ball valve complete all as specified and directed. |
| 46 | Supply and Fix for Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90gms) and fixed 15mm bore fixed in repair complete all as specified and directed. |
| 47 | Supply and Fix for Bib tapschromium plated cast copper alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrulo and fixed 15mm bore fixed in repair complete all as specified and directed. |
| 48 | Supply and fixed in repair Angle stop cock with wall flange 15mm bore cast copper alloy complete all as specified and directed. |
| 49 | Supply and Fix forStop cock fancy type chromium plated with long shank and cup(Concealed type) screwed down high pressure with crutch or butterfly handle screwed bot ends for iron pipe or for union and fixed 15mm bore fixed in repair complete all as specified and directed. |
| 50 | Supply and Fix in repairs 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank fancy type screwed for iron pipe complete all as specified and directed.. |
| 51 | Supply and fixed in repair PVC waste pipe of 32 mm size flexible and 1.2 mtr long, fitted to basin or sinkcomplete all as specified and directed. |
| 52 | Supply and Fix PVC valveless, syphonic action type flusing cistern low level, white, with inlet, ball valve, float and handle including bracket 10 ltrs fixed in repair complete all as specified and directed. |
| 53 | Dismantling water tanks and removing to store capacity exceeding 250 Ltr not exceeding 500 Ltr complete all as specified and directed. |
| 54 | Supply and Fix 500 Ltr capacity Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 55 | Supply and Fix Ball PTMT valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed in repair 20mm bore fixed in repair complete all as specified and directed. |
| 56 | Supply and Fix in repairPVC connection 15mm bore size with PTMT nuts of length 45cm complete all as specified and directed. |
| 57 | Supply and Fix grating PTMT (Minimum weight 40gms) 150mm size fixed to repair complete all as specified and directed. |
| 58 | Supply and Fix viterous china squatting pan of Orissa pattern size 580x440mm white with integral foot rest(excluding flushing cistern) and flush pipe complete all as specified and directed. |
| 59 | Supply and Fix in repair vitreous china wash down water closet pan (pedestal pattern), white connecting to trap and to flushing pipe front or back inletetc complete all as specified and directed |
| 60 | Supply and Fix Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fix in repairs complete all as specified and directed. |
| 61 | Supply and Fix in repair Brass chromium plated shower rose 125mm complete all as specified and directed. |
| 62 | Material and Labour for 75mm thick cement concrete 1:3:6 (type C2) using 40mm graded stone aggregate as in plinth protection joint filled with bitumen sand mixerfinished even and smooth without using extra cement complete all as specified and directed. |
| 63 | Supply and Fix Powder coated decorative/fancy type curtain rod 25mm dia withbracket fancy type complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
