Military Engineer Services-MES has published Tender For Repairs To False Ceiling And Wall Cladding And Repairs To Roof Over Roof, Mp Tiles And Connected Works Of Certain Bldg Under Age B/R-I At Ins Shivaji Lonavla. Submission Date for this Tender is 02-01-2024. False Celing Tenders in lonavla Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets/Aluminium snap grid |
| 2 | M&L for powder coated aluminium snap grid frame work for false ceiling, with aluminium angle 25mmx25mmx1.5mm fixed to perimeter of wall, Main "T" runner 38mmx25mmx1.5mm and secondary/cross "T" runner 25mmx25mmx1.5mm to be interlocked in such a way that the size of grid shall be 605mmx 605mm including 6mm dia GI hangers (upto 1200mm length) adjusting level fixed to roof bymeans of ceiling cleats made out of GI flat 40x3mm, 60mm long and expansion hold fastners 12.5mm dia, 40mm long, icluding romoving and refixing of existing fittings and fixtures complete all as specified and as directed. Note:- The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. |
| 3 | S&F 4 mm thick Non Asbestos (E-board) designer tiles (Electra) suitably fixed in false ceiling grid /frame with staples or screws complete all as specified and as directed. |
| 4 | Dismantling floor, hearth or external wall tilling including cement mortor bedding (but not backing), removing serviceble tiles to store and rubbish off the premises complte all as specified. |
| 5 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 6 | M&L rendering in CM (1:4) 15mm thick cement plaster as in backing coat brick/concrete surface with necessary adhesives finished rough to receive wall claddings/ cladding tiles |
| 7 | M&L forExternal Walltiles area of tiles n exc 0.20 Sqm each (With a tolerance of +- 4% in thickness) fixed with blended powder polymer modified cement based stone tile adhesives of thickness of approx 3-6 mm thick combed with notched trowel and placed and topped properly to ensure complete coverage of backside of tiles over adhesives including cleaning/ preparation of newely plastered surfaces to be tiled and making it free from wax, grease, polish,paints etc all as per manufacturers instructions Note :strictly apply the adhesive paste which can be tiled withing 10-15 minutes (Makes: Somany External walltiles/Johnsontiles. Roff Stone tile adhesives/Dr. Fixit Fevimate TL tile fixing adhesive Note : Item is required to be carried out at height upto 15 m above GL. Rate deemed to include for all necessary scaffolding and protective measures to work atheight up to 15 M from GL |
| 8 | S&F in repairs16 to 18mm Dholpur stone cladding gang saw out with machine out edges, uniform colour of each stone size exceeding 0.25 Sqm area and not exceeding 0.50Sqm fixed with and including one number SS clamps (grade-202) of flat 30mm x2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment. |
| 9 | S&F 40mm thick Solid PVC Sandwich Panel with lmm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification inclduing removing old partitions of any type any size |
| 10 | M&L for Preparation of old plastered surfaces of walls,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface up to 15M height from ground level incldng removing and refixng wall paintngs boards and panels of any descripton complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 11 | M&L for Preparation of old plastered surfaces of walls,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat water based premium acrylic smooth exterior emulsion of approved colourwith silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint up to 15height complete all as directed. |
| 12 | Dismantling of CGI/PGI/Galvalume sheet roofing any gauge and any thickness including ridge, valley gutter etc. |
| 13 | Dismantling boarding any description fixed in any position fixed with nails. |
| 14 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any design/colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws at any height all as specified and as directed. |
| 15 | S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, borduing fixed with self tapping screws as specified. |
| 16 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 17 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) |
| 18 | S&FRolled sections of Fe 410-w (Gde 250-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 19 | S&F for rollled steel section drilled and countersunk forwind ties for roof including securing with bolts at any height all as directed Enngineer-in-charge |
| 20 | M&L for preparation of new steel surface of steel and applying two coats of synthetic enamel paint over a coat redoxide primer |
| 21 | M&L for Preparation of Old steel surface of steel and applying two coats of synthetic enamel paint |
| 22 | Completely removing existing water proofing treatment of any descriptions and any type including top layer of plaster / china mosaic wherever occurs over roof and chhajja surfaces and scrubbing the surface with wire brush and cleaning wash down with water to receive new cement plaster / PCC layer and removing the waste material / debris to a distance exc. 1500m butn.exc. 2000m etc complete all as specified and directed by Engr-in-charge. |
| 23 | M/L for rendering 10mm thick in cm 1:4 on concrete roof and chajja surface to get a uniform level surface for laying of membrane treatment |
| 24 | M/L for PCC 1: 2 : 4 type B-1 (using 20mm graded agg) for PCC padding on RCC roof surface finished even and smoother using extra cement all as specified and directed by Engr-in-Charge. |
| 25 | M&L for water proofing treatment to RCC roof slab all as specified below and as directed:- a) Apply one coat of bitumous primer @ 0.25 Kg/Sqm. (b) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area.(c) Laying APP polymer modified membrane 4mm thick with non woven polyster reinforcement weighing not less than 4.00 Kg/ Sqm applied by torch application method.(d) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/sqm of the surface area. (e) Apply a coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm. |
| 26 | Disconnecting existing tanks of any capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after carrying out Roof treatment with all accessories all as specified and directed |
| 27 | Removing building materilas such as bricks, stones, concrete, sandm, APP membrane etc to a distance upto 15Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
