Bids Are Invited For 1 Manufacturing, Providing And Placing In Position Machine Made Factory Assembled Officer Cabin Table Of Size: 1800Mm ( L1 ) X 1600Mm ( L2 ) X 800Mm ( D1 ) X 400Mm ( D2 ) X 740-760Mm ( H1 ) / 640- 660Mm ( H2 ) With Following Details And Specifications. The Top Is Made Of 35- 40Mm Thick Veneer Mdf E- 1 ( Environmental Friendly ) , Board, Edge Banding ( Pvc ) Tape 2Mm Thick. E1 Grade Veneer Mdf With Zero Urea Formaldehyde Emissions ( <Or= 8Mg / 100 G Oven Dry Board-Perforated Method ) For Better In-House Quality Comply With ( En 120- 1992 ) With Side Storage Unit Of Size 800-1600 Mm X 400-420 Mm Of Required Height. The Under Structure Is Made Of 35- 40 Mm Thick Veneer Mdf Grade E- 1 ( Environmental Friendly ) , Board Covered With Edge Banding ( Pvc ) Tape 2 Mm Thick. E1 Grade Veneer Mdf With Zero Urea Formaldehyde Emissions ( <Or= 8Mg / 100 G Oven Dry Board-Perforated Method ) For Better In-House Quality Comply With ( En 120- 1992 ) . The Aluminium Access Flap Is Made From Anodised Aluminium With Soft Closure. The Modesty Panel ( Wherever Required ) Is Made Of 25-30 Mm Thick Veneer Mdf ( E1-Grade ) With 2Mm Thick Pvc Edge Banding Tape And Brackets Used Are 3.2 Mm Powder Coated Steel Of 80-90 Microns. Side Storage: Body Of Storages Made Out Of 19 Mm Thick Veneer Mdf ( E-1 Grade ) With 2 Mm Thick Pvc Edge-Banding Tape. E1 Grade Veneer Mdf To Be Used Which Provide No Urea Formaldehyde Emission And Formaldehyde Phenol Base With Emission Of Not More Than ( <Or= 8 Mg / 100 G Oven Dry Board Perforated Method ) For Better In-House Quality Comply With ( En 120-1992 ) .The Storage Should Have Extruded Aluminium Handle, As Per Requirement. Product Should Be Bifma Gold Rated Scs Global Certified For In House Air Quality And With 5 Years Warranty. 2 Manufacturing, Providing And Placing In Position Machine Made Factory Assembled Officer Cabin Table Of Size: 1600W1 X 1800W2 X 800D1 X 400D2x 740H Mm With Following Details And Specification. The Top Is Made Of 35- 40 Mm Thick Veneer Mdf E- 1 ( Environmental Friendly ) , Board Edge Banding ( Pvc ) Tape 2Mm Thick. E1 Grade Veneer Mdf With Zero Urea Formaldehyde Emissions ( <Or= 8 Mg / 100 G Oven Dry Board-Perforated Method ) For Better In-House Quality Comply With ( En 120-1992 ) With Side Storage Unit Of Size 800 X 400-420 Mm Of Required Height. The Under Structure Is Made Of 35- 40 Mm Thick Veneer Mdf Grade E- 1 ( Environmental Friendly ) , Board Cover Edge Banding ( Pvc ) Tape 2Mm Thick. E1 Grade Veneer Mdf With Zero Urea Formaldehyde Emissions ( <Or= 8 Mg / 100 G Oven Dry Boardperforated Method ) For Better In-House Quality Comply With ( En 120-1992 ) . The Aluminium Access Flap Is Made From Anodised Aluminium With Soft Closure. The Modesty Panel ( Wherever Required ) Is Made Of 25-30 Mm Thick Veneer Mdf ( E1-Grade ) With 2Mm Thick Pvc Edge Banding Tape And Brackets Used Are 3.2 Mm Powder Coated Steel Of 80-90 Microns. Side Storage: Body Of Storages Made Out Of 19 Mm Thick Veneer Mdf ( E-1 Grade ) With 2 Mm Thick Pvc Edge Banding Tape E1 Grade Veneer Mdf To Be Used Which Provide No Urea Formaldehyde Emission And Formaldehyde Phenol Base With Emission Of Not More Than ( <Or= 8 Mg / 100 G Oven Dry Board Perforated Method ) For Better In-House Quality. This Should Comply With ( En 120-1992 ) Should Have Extruded Aluminium Handle, As Per Requirement. Product Should Be Bifma Gold Rated Scs Global Certified For In House Air Quality And With 5 Years Warranty. 3 Providing And Placing High Back For Cabin. The Seat Shall Be Made Up Of 12Mm Thick Hot Pressed Plywood & Upholstered With Leatherite And Moulded Medium Density Foam. Overall Dimensions Of Chair Shall Be, Width Of Chair - 640Mm, Depth Of Chair - 645Mm, Height Of Chair-1185-1245Mm As Measured Till Pedestal . The Back Shall Be Designed With Contoured Lumber Support For Extra Comfort. Size Of Back Shall Be W-510+10M, H-715Mm & Size Of Seat Shall Be W-520+10 Mm X D-450Mm X H-473-533Mm. Medium Density Foam Should Be Used In Making Seat & Back Which Shall Be Moulded With Density 45Kg / M ³ And Hardness Load 16Kgf. The Seat And Back Should Be Arrested Together With Spine Made Of 8Mm Thick Hr Steel And Should Be Powder Coated In Black With 40-60 Micron . The Fixed Armrest Are Made Of Aluminuim With Pu Padded. The Mechanism Of The Chair Shall Have Following Features : 360 Degree Swivel Type, Knee Tilt Mechanism, Seat & Back Tilting Ration Of 1: 1.5, Front Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort, Multiple Locking Position. Gas Lift Allows 10Mm Of Height Adjustment. The Pedestal Shall Be Made Of Die-Cast Aluminium Base. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 670Mm Pitch-Centre-Dia 700-720Mm With Castors ) . The Twin Wheel Castors Shall Be Made Of Nylon Injection Moulded In Black Color. Product Should Be Bifma Gold Rated Scsglobal Certified For Inhouse Air Quality And With 05 Years Warranty. 4 Providing And Placing Mid Back Chairs For Cabin . The Seat Shall Be Made Up Of 12Mm Thick Hot Pressed Plywood & Upholstered With Leatherite And Moulded Medium Density Foam. Overall Dimensions Of Chair Shall Be, Width Of Chair - 640Mm, Depth Of Chair - 620Mm, Height Of Chair-1000-1065Mm As Measured Till Pedestal . The Back Shall Be Designed With Contoured Lumber Support For Extra Comfort. Size Of Back Shall Be W-490+10M, H-530Mm & Size Of Seat Shall Be W-500+10 Mm X D-450Mm X H-470-530Mm. Medium Density Foam Should Be Used In Making Seat & Back Which Shall Be Moulded With Density 45Kg / M ³ And Hardness Load 16Kgf. The Seat And Back Should Be Arrested Together With Spine Made Of 8Mm Thick Hr Steel And Should Be Powder Coated In Black With 40-60 Micron . The Fixed Armrest Are Made Of Aluminuim With Pu Padded. The Mechanism Of The Chair Shall Have Following Features : 360 Degree Swivel Type, Knee Tilt Mechanism, Seat & Back Tilting Ration Of 1: 1.5, Front Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort, Multiple Locking Position. Gas Lift Allows 10Mm Of Height Adjustment. The Pedestal Shall Be Made Of Die-Cast Aluminium Base. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 670Mm Pitch-Centre-Dia 700-720Mm With Castors ) . The Twin Wheel Castors Shall Be Made Of Nylon Injection Moulded In Black Color. Product Should Be Bifma Gold Rated Scsglobal Certified For Inhouse Air Quality And With 05 Years Warranty. 5 Manufacturing, Providing And Placing High Back Chairs For Cabins. Chair Seat Made Up Of Insert Moulded Polyurethane Foam Upholstered With Foam Laminated Mesh Fabric, Insert Moulded Foam Assembled Over A Load Bearing Plastic Seat Cover, Back Is Made Up Of Two Piece Injection Moulded Frame, Inner Frame Upholstered With Mesh Fabric And Mounted On The Main Assembly, Back Adjustable Lumbar Support For Achieving Comfortable Seating Posture, Seat Size 44.5 - 52.5 Cm Depth ( Approx. ) , 46.4 - 51.0 Cm Width ( Approx. ) , Sub Assembly Back Size 55.5 Cm- 62 Cm Height. ( Approx. ) , Effective Back Height From Seat - 57 Cm ( Approx. ) , Polyurethane Foam For Seat Having Density 65±4 Kg / M3, Armrest Top Injection Moulded In Polyurethane And Mounted On The Injection Moulded Height Adjustable Type Armrest, Armrest Height Adjustable Up To 4.5 Cm ( Approx ) In 3 Steps & Width Movement Adjustable, 360 Degree Revolving Type. Mechanism, Single Point Control For Seat And Back Adjustment, Front Pivot For Tilt, Tilt Adjustment For Back In 3Position Locking With Antishock Feature, Pneumatic Height Adjustment Of 8.5 Cm Spine Bracket Made Of Aluminum Die Cast Piece Connecting To Back With Mechanism, Pedestal Made Of Die Cast Alunimium Fitted With 5 Nos. Twin Wheel Castors ( Castor Wheel Dia. 6.0 Cm Approx. ) , Base Pedestal Dia 65.0Cm ( Approx. ) And Pitch Center Dia. 71.0 Cm With Castors, Twin Wheel Castors Injection Moulded In Nylon Etc. All Complete As Per Manufacturers Specification, Approved Sample And Direction Of Engineer-In-Charge. Product Should Be Bifma Gold Rated Scsglobal Certified For Inhouse Air Quality And With 05 Years Warranty. 6 Manufacturing, Providing And Placing Mid Back Chairs For Cabins. Chair Seat Made Up Of Insert Moulded Polyurethane Foam Upholstered With Foam Laminated Mesh Fabric, Insert Moulded Foam Assembled Over A Load Bearing Plastic Seat Cover, Back Is Made Up Of Two Piece Injection Moulded Frame, Inner Frame Upholstered With Mesh Fabric And Mounted On The Main Assembly, Back Adjustable Lumbar Support For Achieving Comfortable Seating Posture, Seat Size 44.5 - 52.5 Cm Depth ( Approx. ) , 46.4 - 51.0 Cm Width ( Approx. ) , Sub Assembly Back Size 55.5 Cm- 62 Cm Height. ( Approx. ) , Effective Back Height From Seat - 57 Cm ( Approx. ) , Polyurethane Foam For Seat Having Density 65±4 Kg / M3, Armrest Top Injection Moulded In Polyurethane And Mounted On The Injection Moulded Height Adjustable Type Armrest, Armrest Height Adjustable Up To 4.5 Cm ( Approx ) In 3 Steps & Width Movement Adjustable, 360 Degree Revolving Type. Mechanism, Single Point Control For Seat And Back Adjustment, Front Pivot For Tilt, Tilt Adjustment For Back In 3Position Locking With Antishock Feature, Pneumatic Height Adjustment Of 8.5 Cm Spine Bracket Made Of Aluminum Die Cast Piece Connecting To Back With Mechanism, Pedestal Made Of Die Cast Alunimium Fitted With 5 Nos. Twin Wheel Castors ( Castor Wheel Dia. 6.0 Cm Approx. ) , Base Pedestal Dia 65.0Cm ( Approx. ) And Pitch Center Dia. 71.0 Cm With Castors, Twin Wheel Castors Injection Moulded In Nylon Etc. All Complete As Per Manufacturers Specification, Approved Sample And Direction Of Engineer-In-Charge. Product Should Be Bifma Gold Rated Scsglobal Certified For Inhouse Air Quality And With 05 Years Warranty. 7 Manufacturing, Providing And Placing High Back Chairs For Cabins. Chair Seat Made Up Of Insert Moulded Polyurethane Foam Upholstered With Foam Laminated Mesh Fabric, Insert Moulded Foam Assembled Over A Load Bearing Plastic Seat Cover, Back Is Made Up Of Two Piece Injection Moulded Frame, Inner Frame Upholstered With Mesh Fabric And Mounted On The Main Assembly, Back Adjustable Lumbar Support For Achieving Comfortable Seating Posture, Overall Chair Size: W63.0 -67.0Cms , D 63.0-67.0Cm , H112.5.0-121.5Cm, Seat Size 44.5 - 52.5 Cm Depth ( Approx. ) , 46.4 - 51.0 Cm Width ( Approx. ) , Sub Assembly Back Size 55.5 Cm- 62 Cm Height. ( Approx. ) , Effective Back Height From Seat - 57 Cm ( Approx. ) , Polyurethane Foam For Seat Having Density 65±4 Kg / M3, Armrest Top Injection Moulded In Polyurethane And Mounted On The Injection Moulded Height Adjustable Type Armrest, Armrest Height Adjustable Up To 4.5 Cm ( Approx ) In 3 Steps & Width Movement Adjustable, 360 Degree Revolving Type. Mechanism, Single Point Control For Seat And Back Adjustment, Front Pivot For Tilt, Tilt Adjustment For Back In 3Position Locking With Antishock Feature, Pneumatic Height Adjustment Of 8.5 Cm Spine Bracket Made Of Aluminum Die Cast Piece Connecting To Back With Mechanism, The Pedestal Shall Be Made Of Nylon Base.It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 670Mm Pitch-Centre-Dia 700-720Mm With Castors ) . The Twin Wheel Castors Shall Be Made Of Nylon Injection Moulded In Black Color. . Product Should Be Bifma Gold Rated Scsglobal Certified For Inhouse Air Quality And With 05 Years Warranty. 8 Manufacturing, Providing And Placing Mid Back Chairs For Workststion & Cabins Visitor . Chair Seat Made Up Of Insert Moulded Polyurethane Foam Upholstered With Foam Laminated Mesh Fabric, Insert Moulded Foam Assembled Over A Load Bearing Plastic Seat Cover, Back Is Made Up Of Two Piece Injection Moulded Frame, Inner Frame Upholstered With Mesh Fabric And Mounted On The Main Assembly, Back Adjustable Lumbar Support For Achieving Comfortable Seating Posture, Overall Chair Size: W61.0 -62.0Cms , D 61.0-63.0Cm , H96.0- 105.0Cm, Seat Size 46.5 - 51.5 Cm Depth ( Approx. ) , 45.4 - 51.0 Cm Width ( Approx. ) , Sub Assembly Back Size 55.5 Cm- 62 Cm Height. ( Approx. ) , Effective Back Height From Seat - 57 Cm ( Approx. ) , Polyurethane Foam For Seat Having Density 65±4 Kg / M3, Armrest Top Injection Moulded In Polyurethane And Mounted On The Injection Moulded Height Adjustable Type Armrest, Armrest Height Adjustable Up To 4.5 Cm ( Approx ) In 3 Steps & Width Movement Adjustable, 360 Degree Revolving Type. Mechanism, Single Point Control For Seat And Back Adjustment, Front Pivot For Tilt, Tilt Adjustment For Back In 3Position Locking With Antishock Feature, Pneumatic Height Adjustment Of 8.5 Cm Spine Bracket Made Of Aluminum Die Cast Piece Connecting To Back With Mechanism, The Pedestal Shall Be Made Of Nylon Base.It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 670Mm Pitch-Centre-Dia 700-720Mm With Castors ) . The Twin Wheel Castors Shall Be Made Of Nylon Injection Moulded In Black Color. . Product Should Be Bifma Gold Rated Scsglobal Certified For Inhouse Air Quality And With 05 Years Warranty. Total Quantity : 42
