Tender For Renovation Of Conference Hall At Ada Hq, bangalore-Karnataka

Tender For Renovation Of Conference Hall At Ada Hq; 1 Electrical Items : 2 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge With In Cement Mortar. 3 Dismantling Cement Asbestos Or Other Hard Board Ceiling Or Partition Walls Including Stacking Of Serviceable Materials And Disposal Of Unserviceable Materials Within 50 Metres Lead. 4 Dismantling Aluminium / Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineer-In-Charge. 5 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. 6 Half Brick Masonry With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level With Cement Mortar 1:4 ( 1 Cement :4 Coarse Sand ) . 7 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia& Length With Sal Wood. 8 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters With 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws 9 Extra For Providing Lipping With 2Nd Class Teak Wood Battens 25 Mm Minimum Depth On All Edges Of Flush Door Shutters ( Over All Area Of Door Shutter To Be Measured ) . 10 Providing 40X5 Mm Flat Iron Hold Fast 400 Mm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 300X100x150 Mm 1:3:6 Mix ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size ) . 11 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. 12 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete With Twin Rubber Stopper. 13 Providing And Fixing Bright / Matt Finished Stainless Steel Handles Of Approved Quality & Make With Necessary Screws Etc All Complete Of 125 Mm. 14 Providing And Laying In Position Mks Tufted Carpeting Of Size 150X210 15 Providing And Fixing In Position Polyester Blend Sun Screen Full Blackout Fabric Roller Blinds With Remote Control 16 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall / Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C / C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per ManufacturerS Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With 12.5 Mm Thick Tapered Edge Gypsum Plain Board Conforming To Is: 2095- ( Part I ) :2011 ( Board With Bis Certification Marks ) 17 Supply And Installation Of Anutone Synth Stretch Srs Polyfibre Synth Pf Panels, Core-Pigmented, High-Density, Of Size As Per Requirement 25Mm Thk, Installed By Using Above Framework 18 Providing And Fixing Tiled False Ceiling Of Specified Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams / Sqm, Both Side Inclusive ) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick ( Minimum ) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting / Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge With Gi Metal Ceiling Lay In Plain Tegular Edge Global White Color Tiles Of Size 595X595 Mm, And 0.5 Mm Thick With 8 Mm Drop; Made Of G I Sheet Having Galvanizing Of 100 Gms / Sqm ( Both Sides Inclusive ) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns. Including Factory Painted After Bending. 19 12 Mm Cement Plaster Of Mix Of 1:4 ( 1 Cement: 4 Fine Sand ) 20 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface With Water Thinnable Cement Primer. 21 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Of Two Or More Coats On New Work. 22 French Spirit Polishing With Two Or More Coats On New Works Including A Coat Of Wood Filler. 23 Providing And Fixing In Position Wall Panelling At All Heights With Integral Densified Calcium Silicate Panels / Tiles Of Size 595 X 595Mm, Having Nrc ( Noise Reduction Coefficient ) Of 0.50 ( Minimum ) As Per Is 8225:1987, Light Reflectance Of 85% ( Minimum ) . Non Combustible As Per Bs:476 ( Part-4 ) , Fire Performance As Per Bs:476 ( Part 6 &7 ) , Humidity Resistance Of 100%, Thermal Conductivity <0.043 W / M K As Per Astm 518:1991, Comprising Of A Frame Made From Especially Fabricated Galvanised Mild Steel Sheet 0.50 Mm Thick Pressed Section ( Galvanizing @120 Grams Per Sqm Including Both Sides ) I.E.Vertical Studs Of Size 48 X 34 X 36 Mm Are Placed At 600Mm Center To Center In A Floor And Ceiling Channel Section Of Size 50 X 32M Fixed To The Floor And Soffit At 600Mm Centers Using 12Mm Dia, 50Mm Long Wedge Type Expanded Zinc Alloy Dash Fastner With 10Mm Bolt. This Same Channel Is Then To Be Fixed In Horiziontal Direction At 600Mm Center To Center So As To Form A Grid Of 600Mm X 600Mm. Glasswool Of 50Mm Thickness Is Then To Be Inserted In The Slots And Finally Calcium Silicate Non Combustible Panels / Tiles Are To Be Screw Fixed With Self Tapping Pan Head Nickel Coated Mild Steel Screws Of Size 13 X 3.2Mm On To This Grid Leaving An Even Groove Of 1 Mm Between The Panels. The Joints Between The Panels Are To Be Duly Jointed And Finished Using Recommended Jointing Calcium Silicate Based Compound And Fiber Joint Tape Roll 50Mm Wide ( 90 Metre ) Roll And Two Coats Of Primer Suitable For Panelling As Per ManufacturerS Specification As Per Direction Of Engineer-In-Charge All Complete.Supply And Installation Of Anutone Slim, Polyfibre Panels, Core-Pigmented, High-Density, Synthpf Rigid Panels Of Size 1200X2400x9mm Thk, Volume Density 220Kg / M3, Weight 2Kg / M2 Adhered On Anutone Strand2 Primer, Square Edge Magnesite Bondedpinewoodfibre Core Tiles Of Size 600X1200x15mm, Volume Density 400Kgs / M3, Weight 6Kg / M2installed By Using Above Framework 24 Providing And Fixing Anutone Salon Slats Plus 16Mm Wall Tiles Made Of Wood Fibre Cement Composites Covered With Acoustically Transparent Absorptive Microfibers On The Front Side With An Option Of Colours As Per The Choice Of The Architect / Person In Charge Of Size 128X2430 Mm With Absorption Upto 0.75 Nrc To Be Installed Using Anutone / Himalayan Acoustics / Equivalanth Profile Fixed Ong.I Studs Of 2400Mm X 50Mm Web & Flanges Of 15 & 50Mm Fully Knurled To Give High Strength, Hot Dipped Galvanized Steel With 120Gsm Zinc Coating Specially Designed For Acoustic Vibration Management With A Backing Of Absorbantwool Of 50Mm Thick And 1000 Gsm. The Above Work Has To Be Done As Per The Engineer-In-Charge’S Instructions And Drawings. 25 Supplying And Fixing Of Following Ways, Double Door , Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) 4Way ( 4+12 ) , Double Door 26 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole 27 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess / In Columns And Beams Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. ( A ) 20Mm 28 ( B ) 25Mm 29 ( C ) 32Mm 30 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. ( A ) 3X2.5 Sqmm 31 ( B ) 6X2.5 Sqmm 32 ( C ) 3X4.0 Sqmm 33 ( D ) 6X6.0 Sqmm 34 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point Of Group C With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Note:The Scope Of The Work Includes Supplying Of Conduit Of Required Dia , Frls Pvc Ins Copper Wires Of 1.5 Sqmm , Modular Box Of Required Size, Modular Cover Plate, &Modular Switch 35 Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. ( A ) 5 / 6 Amps Switch 36 ( B ) 15 / 16 Amp Switch 37 ( C ) 3 Pin 5 / 6 Amp Socket Outlet 38 ( D ) 6 Pin 15 / 16 Amp Socket Outlet 39 ( E ) Bell Push 40 Supplying And Fixing Call Bell / Buzzer Suitable For Single Phase, 230Volts Complete As Required 41 Supplying And Fixing Following Size / Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required. ( A ) 1 Or 2 Module ( 75Mm X 75Mm ) 42 ( B ) 3 Module ( 100Mm X 75Mm ) 43 ( C ) 4 Module ( 125Mmx75mm ) 44 ( D ) 6 Module ( 200Mmx75mm ) 45 ( E ) 8 Module ( 125Mmx125mm ) 46 ( F ) 12 Module ( 200Mmx150mm ) 47 Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required 48 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 49 Installation, Testing And Commissioning Of Pre-Wired, Fluorescent Fitting / Compact Fluorescent Fitting / Led Fittings And Of All Types, Complete With All Accessories And Tube / Lamp Etc. Directly On Ceiling / Wall, Including Connections With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable And Earthing Etc.As Required. 50 Supplying And Drawing Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. ( A ) 1 Run Of Cable 51 ( B ) 2 Run Of Cable 52 Supplying And Installing Following Size Of Perforated Painted With Powder Coating M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling / Surface Mount With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. ( A ) 100 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 53 Supplying And Installing Following Size Of Perforated Painted With Powder Coating M.S. Cable Trays Bends With Perforation Not More Than 17.5%, , Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. ( A ) 100 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 54 Supplying And Installing Following Size Of Perforated Painted With Powder Coating M.S. Cable Trays Tee With Perforation Not More Than 17.5%, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Paintingsuspendersetc As Required. ( A ) 100 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 55 Supplying, Installation, Testing & Commissioning Sector Panel Suitable For 6Zone Zones, Complete With Visual Indications For Short Circuit Fault, Open Circuit Fault, Fire Condition And All Other Standard Facilities As Per Is:2189 With Mimic Diagram For All Area / Zone Covered, Complete With All Connections, Interconnections As Required. 56 Supplying, Installation, Testing & Commissioning Of Manual Call Boxes Of Ms Construction In Surface / Recess With Stainless Steel Chain & Hammer Assembly Complete With Glass And Push Button Etc. As Required. 57 Supplying, Installation, Testing & Commissioning Fire Alarm Sounder With Facility To Make Announcement, Mounted In M.S. Box ( 16 Swg ) With Hinged Cover Plate & Suitable For Operation With Amplifier I / C Line Matching Transformer Etc. Complete As Required. 58 Supplying, Installation, Testing & Commissioning Of Smoke Detector With Builtin Led And Mounting Base Complete With All Connections Etc. As Required. 59 Supplying, Installation, Testing & Commissioning Response Indicator On Surface / Recess Ms Box Having Two Leds Metallic Cover Complete With All Connections Etc. As Required. 60 Supplying & Laying Of 2X1.5 Sqmm Fire Alarm Armoured Cable, 600 / 1000V Rated With Annealed Copper Conductor Having Xlpe Insulation, Steel Wire Armouring & Frls Outer Sheath Complete As Required. 61 Wiring For 2 Lights Controlled By One No 6A Switch With 2.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Pvc Conduit, And Earthing The Point With 2.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. 62 Wiring For 3 Lights Controlled By One No 6A Switch With 2.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Pvc Conduit, And Earthing The Point With 2.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. 63 Supply Of Led Round Recess Mount Down Lighter With 21W System Wattage. Housing Shall Be With Powder Coated Pressure Die Cast Aluminium Alloy With Corrosion Resistant Polyester Powder Coat & With Extended Heat Sink. Diffuser / Cover Made Of Lexan Plastic Material. Rated Life Shall Be L70 @ 50000Hrs. Which Shall Has Inbuilt Electrical Protection Like Over / Under Voltage, Short Circuit, Over Load, Open Circuit & Miswiring. Driver Is On Constant Current Driver Output Driver @ 0.6A With Pf >0.9 With Line Voltage @ 220-240V @ 50 / 60Hz, Driver Efficency> 85% & Thd < 15%. Led Efficeiency> 130 Lm / W At 1W & Fixture Efficiency > 100Lm / W With Cri >75 With Injection Moulded Polycarbonate Lens.Similar To Havells Endurahodlr21wled857mod Or Equivalent Fitting. 64 Supply Of Decorative Wall Light Of Led With 9W System Wattage. Gold Finish Fixture With Cognac Hammered Glass Diffuser. Rated Life Shall Be L70 @ 50000Hrs. Which Shall Has Inbuilt Electrical Protection Like Over / Under Voltage, Short Circuit, Over Load, Open Circuit & Miswiring. Driver Is On Constant Current Driver Output Driver @ 0.6A With Pf >0.9 With Line Voltage @ 220-240V @ 50 / 60Hz, Driverefficency>85%&Thd<15%.Led Efficeiency>130Lm / Wat1w & Fixture Efficiency > 100Lm / W With Cri >75 With Injection Moulded Polycarbonate Lens. Similartohavellsfloretinewl1lse27 Cgnlhfoajd1tz1a060 65 Supply Of Flexible Led Strip With Optimum Brightness And Uniformity Of Light For Perfection For Cove Lighting. Rated Life Shall Be L70 @ 50000Hrs. Which Shall Has Inbuilt Electrical Protection Like Over / Under Voltage, Short Circuit, Over Load, Open Circuit & Miswiring. Driver Is On Constant Current Driver Output Driver @ 0.6A With Pf >0.9 With Line Voltage @ 220-240V @ 50 / 60Hz, Driver Efficency > 85% & Thd < 15%. Led Efficeiency > 130 Lm / W At 1W & Fixture Efficiency > 100Lm / W With Cri >75 With Injection Moulded Polycarbonate Lens. Similar To Havells Led Flexistrip5mip2024v / 2A Led865mod V1 Or Equivalent Fitting. 66 Supplying And Fixing 6 A To 32 A Rating, 240 / 415 V, 10 Ka, D Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Singlepoles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 67 Supplying And Fixing 40-63A Rating, 4Pole C Curve, Miniature Circuit Breaker Suitable For Inductive Load In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 68 Supplying And Fixing Of Pop Up Box Flush Type Mounting On Tablecomplete With Connections, Testing And Commissioning Etc. As Required. ( A ) 3 Modules 69 ( B ) 2 Nos 3 Modules 70 Supplying And Fixing Rj-11 Telephone Modular Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 71 Supplying And Fixing Rj-45 Data Modular Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 72 Supply, Installation, Testing And Commissioning Of Vrf Outdoor Units With Inverter Driven Scrollcompressor, Condensor, Fans, Controlsetc..As Per The Specifications With Necessary Refrigerant Gas And Oil Charge.The Compressor Shall Be Highly Efficient Hermatic Scroll Type And Equipped With Inverter Control Capable Of Changing The Speed In Accordance To The Cooling Load Equipment.Upto 10 Different Type And Capacity Indoor-Units Can Be Connected To One Refrigerant Circuit And Controlled Induvidually.Compressor Shall Be Equipped With Inverter Controller, And Capable Of Changing The Rotating Speed To Follow Variations In Cooling Load.The Outdoor Unit Shall Be A Factory Assembled Unit Housed In A Sturdy Weather Proof Casing Constructed From Rust-Proofed Mild Panels Coated With A Baked Enamel Finish.The Noise Level Shall Not Be More Than 55 Db ( A ) At Normal Operation Measured Horizontally 1M Away And 1.5M Above Ground.The Outdoor Shall Have Multi-Step Of Capacity Control To Meet Load Fluctuation And Indoor Unit Induvidual Control.24 Hp ( Top Discharge ) Make:Bluestarnote: This Work Includes Dismantling Existing Ac And Closing Of The Duct Complete As Directed By Engineer In Charge. 73 Supply, Installation, Testing And Commissining Of 4 Way Large Cassette Type Unit, Indoor Unit With Compact Cooling Coil, Electronic Expansion Valve, Three Speed Fan Motors, Dynamically Balanced Blowers, Provision For Fresh Air Intake, Synthetic Washable Media Filter Including Insulation And Suitable For Operation On Single / Three Phase Ac Supply & Remote Control Operation Etc As Required. Make: Bluestar3.2 Tr 74 Supply And Fixing Of Cordless Remote Controller 75 Supply, Installation, Testing And Commissioning Of Variable Refrigerant Flow Distribution Refnets In The Suction& Liquid Lines For Various Sizes Of Copper Refrigerant Piping Including Insulation Etc. Complete As Required. 76 Supply, Installation, Testing And Commissioning Ofinterconnecting Refrigerant Copper Pipe Work With Elastomeric Nitrile Rubber / Closed Cell Expanded Polythene Tubular Insulation Between Each Set Of Indoor & Outdoor Units As Per Specifications, All The Pipe Should Be Properlysupported By Threaded Rod With Slotted Channel For Suction And Discharge Lane 77 Supplying And Drawing Flexible Multicore Cable Manufactured With Electrolytic Grade Flexible Copper With Low Conductor Confirming To Table 3 Class 5 Of Is:8130-1984 And ( Virgin ) Pvc Insulation Suitable For Working Voltage Upto 1100Volts As Per Is-694:1990 & Confirming To Gtp Of Group-A ( A ) Copper Flexible Cabling For Control Cabling 3Core X 2.5 Sqmm Between Indoor Unit And Plug Top And Ac Distibution To 3 Pin Socket 78 ( B ) Copper Flexible Cabling For Control Cabling 2Core X 0.75 Sqmm Shielded Between Indoor Unit And Out Door Unit. 79 ( C ) Copper Flexible Cabling For Control Cabling4core X 16 Sq.Mm Power Cabling From Power Source Mcb To Out Door Unit. 80 Supply & Fixing Ofpvc Pipe With 6 Mm Thick Nitrile Rubber Insulation For Condensate Water From The Ac Units. ( A ) 25Mm 81 ( B ) 32 Mm 82 ( C ) Supply & Charging Of Refrigerant R410a 83 Supply And Fixing Of M.S Stand For Outdoor Units Duly Painted By Redoxide And 2 Rounds Of Enamel Coating Of Black Paint On It.For Fixing The Stands To Place Condensor / Condensing Units. 84 Lifting & Shifting Charges 85 Conference Table - Wooden :Providing And Fixing Conference Table Consisting Of 25 Mm Thick Three Layered Prelaminated Particle Board Table Topedge Banded Pvc Tape Dual Table, 18 Mm Thick Gable Plpb With Edge Bonded Modesty, Hardware-Minifix Assembly And Screw Leg., As Per Specifications, Drawings And As Directed By Engineer In Charge 1375X700x750mm 86 Conference Table - Wooden :Providing And Fixing Conference Table Consisting Of 25 Mm Thick Three Layered Prelaminated Particle Board Table Topedge Banded Pvc Tape Single Table, 18 Mm Thick Gable Plpb With Edge Bonded Modesty, Hardware-Minifix Assembly And Screw Leg., As Per Specifications, Drawings And As Directed By Engineer In Charge 675X700x750mm 87 Conference Table - Wooden :Providing And Fixing Conference Table Consisting Of 25 Mm Thick Three Layered Prelaminated Particle Board Table Topedge Banded Pvc Tape Corner Table, 18 Mm Thick Gable Plpb With Edge Bonded Modesty, Hardware-Minifix Assembly And Screw Leg., As Per Specifications, Drawings And As Directed By Engineer In Charge 600X600x250mm 88 Providing And Fixing Wooden Storage Unit Two Side Laminate With 18 Mm Ply / Plpb With Edge Bound For Body, 18Mm Ply / Plpb With Openable Shutters And Individual Locking System For Shutter, 9 Mm Ply With Edge Bound For Rear Portion With Hafele Fitting Hinges, Hafele Locks, Minifix Assembly, Screw Legs, Handles And Tower Bolt. Complete As Per Specifications, Drawings And As Directed By Engineer In Charge. 89 Providing Conference Revolving Mid Back Chair With Arm Synchronic Tilt Mechanism Designed With 360 Degree-Revolving With 3-Position Locking Made Of Nylon Base Pedestal With 5 Nos Twin Wheel Castor, Armrest Of Polypropylene, Seat Pressed And Molded With Pu Foam Upholstered With 100% Polyester Fabric And Backrest Made Of One Piece Injection Molded Frame Upholstered With Mesh Fabric Having Adjustable Lumbar Support. Overall Width 750 Mm Backrest Height Mm650 Mm Seat Width 500 Mm Seat Depth Mm480 Mm Including Pneumatic Height Adjustments With One Year Warranty Etc Complete 90 Providing Conference Revolving High Back Chair With Arm Synchronic Tilt Mechanism Designed With 360 Degree-Revolving With 3-Position Locking Made Of Nylon Base Pedestal With 5 Nos Twin Wheel Castor, Armrest Of Polypropylene, Seat Pressed And Molded With Pu Foam Upholstered With 100% Polyester Fabric And Backrest Made Of One Piece Injection Molded Frame Upholstered With Mesh Fabric Having Adjustable Lumbar Support. Overall Width 750 Mm Backrest Height Mm650 Mm Seat Width 500 Mm Seat Depth Mm480 Mm Including Pneumatic Height Adjustments With One Year Warranty Etc Complete. 91 Providing And Fixing To Base / Wall Seating With Base Frame 75Dia 10Swg Tubular Mild Steel Powder Coated After Seven Step Pre Treatment Process, Including Arm Rest Supports In 8Mm Ms Sheet Laser Cut And Powder Coated After Seven Step Pre Treatment Process, Arm Rest Made Of 25Mm Solid Termite Proof Rubber Wood Finished With Three Coats Of Matte Melamine, Seat Frame Of 19Mm Dia 16Swg Tubular Mild Steel, 3Mm Ms Flats Galvanized With Internal Coil Spring For Cushioning With Seat Cushion In High Density Polyurethane Foam Upholstered With Approved Polyester Fabric. Unit Is Mounted Onto To The Wall / Partition Using 10Mm Mild Steel Anchoring Plates And M10 Heavy Duty Anchor Bolts. With Gravity Tip Upmovement ( 550 X 590Mm ) .

Refer document

INR 122450.0 /-

Refer document

Name of Work: RENOVATION OF CONFERENCE HALL AT ADA HQ

Sl. No.	Item Description
1	Electrical Items :
2	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge with In cement mortar.
3	Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
4	Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
5	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
6	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level with Cement mortar 1:4 (1 cement :4 coarse sand).
7	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia& length with Sal Wood.
8	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
9	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
10	Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
11	Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
12	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete with Twin rubber stopper.
13	Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete of 125 mm.
14	Providing and laying in position MKS Tufted Carpeting of size 150x210
15	Providing and fixing in position polyester blend sun screen full blackout fabric roller blinds with remote control
16	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/Sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
17	Supply and installation of Anutone Synth Stretch SRS polyfibre Synth PF panels, core-pigmented, high-density, of size as per requirement 25mm thk, installed by using above framework
18	Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ Sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge with GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/Sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns. including factory painted after bending.
19	12 mm cement plaster of mix of 1:4 (1 cement: 4 fine sand)
20	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface with Water thinnable cement primer.
21	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade of two or more coats on new work.
22	French spirit polishing with Two or more coats on new works including a coat of wood filler.
23	Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per Sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer"s specification as per direction of Engineer-in-Charge all complete.Supply and installation of Anutone Slim, polyfibre panels, core-pigmented, high-density, SynthPF rigid panels of size 1200x2400x9mm thk, volume density 220kg/m3, weight 2kg/m2 adhered on Anutone Strand2 primer, square edge Magnesite bondedpinewoodfibre core tiles of size 600x1200x15mm, volume density 400kgs/m3, weight 6kg/m2installed by using above framework
24	Providing and fixing Anutone Salon Slats Plus 16mm wall tiles made of Wood Fibre cement composites covered with Acoustically Transparent Absorptive microfibers on the front side with an option of colours as per the choice of the Architect/ person in charge of size 128x2430 mm with absorption upto 0.75 NRC to be installed using Anutone /Himalayan Acoustics/equivalantH profile fixed onG.I studs of 2400mm X 50mm web & flanges of 15 & 50mm fully knurled to give high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management with a backing of absorbantwool of 50mm thick and 1000 GSM. The above work has to be done as per the engineer-in-charge’s instructions and drawings.
25	Supplying and fixing of following ways, Double door , horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4Way (4+12), Double door
26	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole
27	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess / in columns and beams including cutting the wall and making good the same in case of recessed conduit as required. (a) 20mm
28	(b) 25mm
29	(C ) 32mm
30	Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (a) 3x2.5 Sqmm
31	(b) 6x2.5 Sqmm
32	(c ) 3x4.0 Sqmm
33	(d) 6x6.0 Sqmm
34	Wiring for light point/ fan point/ exhaust fan point/ call bell point of group "C" with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. NOTE:The Scope of the Work includes supplying of conduit of required dia , FRLS PVC Ins Copper Wires of 1.5 sqmm , modular box of required size, modular cover plate,&modular switch
35	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (a) 5/6 amps switch
36	(b) 15/16 amp switch
37	(c)3 pin 5/6 amp socket outlet
38	(d) 6 pin 15/16 amp socket outlet
39	(e) Bell Push
40	Supplying and fixing call bell/ buzzer suitable for single phase, 230Volts complete as required
41	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (a) 1 or 2 Module (75mm x 75mm)
42	(b) 3 Module (100mm x 75mm)
43	(c ) 4 Module (125mmX75mm)
44	(d) 6 Module (200mmX75mm)
45	(e) 8 Module (125mmX125mm)
46	(f) 12 Module (200mmX150mm)
47	Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required
48	Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
49	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/ LED Fittings and of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc.as required.
50	Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. (a) 1 Run of Cable
51	(b) 2 Run of Cable
52	Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling/ surface mount with M.S. suspenders including bolts & nuts, painting suspenders etc as required. (a) 100 mm width X 50 mm depth X 1.6 mm thickness
53	Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. (a) 100 mm width X 50 mm depth X 1.6 mm thickness
54	Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, paintingsuspendersetc as required.(a) 100 mm width X 50 mm depth X 1.6 mm thickness
55	Supplying, installation, testing & commissioning sector panel suitable for 6Zone zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.
56	Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
57	Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
58	Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
59	Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
60	Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
61	Wiring for 2 Lights controlled by One No 6A Switch with 2.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 2.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
62	Wiring for 3 Lights controlled by One No 6A Switch with 2.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 2.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
63	Supply of LED round recess mount down lighter with 21W system wattage. Housing shall be with powder coated pressure die cast aluminium alloy with corrosion resistant polyester powder coat & with extended heat sink. Diffuser/cover made of Lexan plastic material. Rated life shall be L70 @ 50000Hrs. which shall has inbuilt electrical protection like over/under voltage, short circuit, over load, open circuit & miswiring. Driver is on constant current driver output driver @ 0.6A with PF >0.9 with line voltage @ 220-240V @ 50/60Hz, driver efficency> 85% & THD < 15%. LED Efficeiency> 130 lm/W at 1W & fixture efficiency > 100Lm/W with CRI >75 with injection moulded polycarbonate lens.Similar to Havells ENDURAHODLR21WLED857MOD or Equivalent fitting.
64	Supply of Decorative Wall light of LED with 9W system wattage. Gold finish fixture with cognac hammered glass diffuser. Rated life shall be L70 @ 50000Hrs. which shall has inbuilt electrical protection like over/under voltage, short circuit, over load, open circuit & miswiring. Driver is on constant current driver output driver @ 0.6A with PF >0.9 with line voltage @ 220-240V @ 50/60Hz,driverefficency>85%&THD<15%.LED Efficeiency>130lm/Wat1W & fixture efficiency > 100Lm/W with CRI >75 with injection moulded polycarbonate lens. SimilartoHavellsFLORETINEWL1LSE27 CGNLHFOAJD1TZ1A060
65	Supply of Flexible LED strip with optimum brightness and uniformity of light for perfection for cove lighting. Rated life shall be L70 @ 50000Hrs. which shall has inbuilt electrical protection like over/under voltage, short circuit, over load, open circuit & miswiring. Driver is on constant current driver output driver @ 0.6A with PF >0.9 with line voltage @ 220-240V @ 50/60Hz, driver efficency > 85% & THD < 15%. LED Efficeiency > 130 lm/W at 1W & fixture efficiency > 100Lm/W with CRI >75 with injection moulded polycarbonate lens. Similar to Havells LED FLEXISTRIP5MIP2024V/2A LED865MOD V1 or Equivalent fitting.
66	Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, "D" curve, miniature circuit breaker suitable for inductive load of singlepoles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
67	Supplying and fixing 40-63A rating, 4Pole "C" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.
68	Supplying and fixing of pop Up Box Flush type mounting on tablecomplete with connections, testing and commissioning etc. as required. (a) 3 Modules
69	(b) 2 Nos 3 Modules
70	Supplying and fixing RJ-11 Telephone modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as plate & switch box including connections but excluding modular plate etc. as required.
71	Supplying and fixing RJ-45 DATA modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
72	Supply,Installation,testing and commissioning of VRF outdoor units with inverter driven scrollcompressor, Condensor, fans,controlsetc..as per the specifications with necessary refrigerant gas and oil charge.The compressor shall be highly efficient hermatic scroll type and equipped with inverter control capable of changing the speed in accordance to the cooling load equipment. Upto 10 different type and capacity indoor-units can be connected to one refrigerant circuit and controlled induvidually. Compressor shall be equipped with inverter controller,and capable of changing the rotating speed to follow variations in cooling load. The outdoor unit shall be a factory assembled unit housed in a sturdy weather proof casing constructed from rust-proofed mild panels coated with a baked enamel finish. The noise level shall not be more than 55 dB(A) at normal operation measured horizontally 1m away and 1.5m above ground. The outdoor shall have multi-step of capacity control to meet load fluctuation and indoor unit induvidual control. 24 HP (Top Discharge) MAKE:BLUESTAR Note: This work includes Dismantling existing AC and closing of the duct complete as directed by engineer in charge.
73	Supply, Installation, Testing and commissining of 4 way Large Cassette type Unit,Indoor Unit with compact cooling coil, electronic expansion valve, three speed fan motors, dynamically balanced blowers, provision for Fresh Air Intake, synthetic washable media filter including insulation and suitable for operation on single/three phase AC supply & remote control operation etc as required. Make: Bluestar 3.2 TR
74	Supply and fixing of cordless remote controller
75	Supply, Installation, Testing and commissioning of Variable refrigerant flow distribution Refnets in the suction& liquid lines for various sizes of copper refrigerant piping including insulation etc. complete as required.
76	Supply, installation, testing and commissioning ofinterconnecting refrigerant Copper pipe work with elastomeric nitrile rubber/closed cell expanded polythene tubular insulation between each set of indoor & outdoor units as per specifications, all the pipe should be properlySupported by Threaded rod with slotted channel for suction and discharge lane
77	Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (Virgin) PVC insulation suitable for working voltage upto 1100Volts as per IS-694:1990 & confirming to GTP of GROUP-A (a) Copper Flexible Cabling for Control Cabling 3Core x 2.5 sqmm between Indoor unit and plug top and AC distibution to 3 pin socket
78	(b) Copper Flexible Cabling for Control Cabling 2Core x 0.75 sqmm shielded between Indoor unit and Out door unit.
79	(c )Copper Flexible Cabling for Control Cabling4Core x 16 Sq.mm Power Cabling From Power Source MCB To Out door Unit.
80	Supply & Fixing ofPVC Pipe with 6 mm thick nitrile rubber insulation for condensate water from the AC Units. (a) 25mm
81	(b) 32 mm
82	( c) Supply & charging of refrigerant R410A
83	Supply and Fixing of M.S Stand for Outdoor units duly painted by redoxide and 2 rounds of enamel coating of black paint on it.for fixing the stands to place condensor/condensing units.
84	Lifting & Shifting Charges
85	Conference table - Wooden :Providing and fixing conference table consisting of 25 mm thick three layered prelaminated particle board table topedge banded PVC tape dual table,18 mm thick gable PLPB with edge bonded Modesty, Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge 1375x700x750mm
86	Conference table - Wooden :Providing and fixing conference table consisting of 25 mm thick three layered prelaminated particle board table topedge banded PVC tape single table,18 mm thick gable PLPB with edge bonded Modesty, Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge 675x700x750mm
87	Conference table - Wooden :Providing and fixing conference table consisting of 25 mm thick three layered prelaminated particle board table topedge banded PVC tape corner table,18 mm thick gable PLPB with edge bonded Modesty, Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge 600x600x250mm
88	Providing and fixing wooden storage unit two side laminate with 18 mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with openable shutters and individual locking system for shutter, 9 mm PLY with edge bound for rear portion with Hafele fitting hinges, Hafele locks,Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge.
89	Providing Conference Revolving Mid Back Chair with Arm Synchronic tilt mechanism designed with 360 degree-revolving with 3-Position Locking made of Nylon Base Pedestal with 5 Nos twin wheel castor, armrest of Polypropylene, seat pressed and molded with PU foam upholstered with 100% polyester fabric and backrest made of one piece injection molded frame upholstered with Mesh Fabric having Adjustable Lumbar Support. Overall width 750 mm Backrest Height mm650 mm Seat Width 500 mm Seat Depth mm480 mm including pneumatic height adjustments with one year warranty etc complete
90	Providing Conference Revolving High Back Chair with Arm Synchronic tilt mechanism designed with 360 degree-revolving with 3-Position Locking made of Nylon Base Pedestal with 5 Nos twin wheel castor, armrest of Polypropylene, seat pressed and molded with PU foam upholstered with 100% polyester fabric and backrest made of one piece injection molded frame upholstered with Mesh Fabric having Adjustable Lumbar Support. Overall width 750 mm Backrest Height mm650 mm Seat Width 500 mm Seat Depth mm480 mm including pneumatic height adjustments with one year warranty etc complete.
91	Providing and fixing to base / wall seating with base frame 75dia 10swg Tubular Mild steel powder coated after seven step pre treatment process, including arm rest supports in 8mm MS sheet laser cut and powder coated after seven step pre treatment process, arm rest made of 25mm solid termite proof rubber wood finished with three coats of matte melamine, Seat frame of 19mm dia 16swg tubular mild steel, 3mm MS flats galvanized with Internal coil spring for cushioning with seat cushion in high density polyurethane foam upholstered with approved polyester fabric. Unit is mounted onto to the wall/ partition using 10mm mild steel anchoring plates and M10 heavy duty anchor bolts. with gravity tip upmovement (550 x 590mm).