Tender For Renovation Of The F-2 Building In Iimc Campus., calcutta-West Bengal

Tender For Renovation Of The F-2 Building In Iimc Campus.; 1 Dismantling R.C. Floor, Roof, Beams Etc. Including Cutting Rods And Removing Rubbish As Directed Within A Lead Of 75 M. Including Stacking Of Steel Bars, In Any Floor. 2 Dismantling All Types Of Plain Cement Concrete Works, Stacking Serviceable Materials At Site And Removing Rubbish As Directed Within A Lead Of 75 M. Upto 150 Mm. Thick, In Any Floor. 3 Dismantling All Types Of Masonry Excepting Cement Concrete Plain Or Reinforced, Stacking Serviceable Materials At Site And Removing Rubbish As Directed Within A Lead Of 75 M. , In Any Floor. 4 Stripping Off Worn Out Plaster And Raking Out Joints Of Walls, Celings Etc. Upto Any Height And In Any Floor Including Removing Rubbish Within A Lead Of 75M As Directed. 5 Removal Of Rubbish, Earth Etc. From The Working Site And Disposal Of The Same Beyond The Compound Etc. 6 Hire And Labour Charges For Shuttering With Centering And Necessary Staging Using Approved Stout Props And Thick Hard Wood Planks Of Approved Thickness With Required Bracing For Concrete Slabs, Beams And Columns, Lintels Curved Or Straight Including Fitting, Fixing And Striking Out After Completion Of Works, In Any Floor. 25 Mm To 30 Mm Thick Wooden Shuttering As Per Decision & Direction Of Engineer-In-Charge. 7 Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming And Dressing Bed To Proper Level And Filling Joints With Local Sand. 8 Ordinary Cement Concrete ( Mix 1:1.5:3 ) With Graded Stone Chips ( 20 Mm Nominal Size ) , In Any Floor, Excluding Shuttering And Reinforcement. 9 Removing Corroded Worn Out Portion Of Reinforcement ( When The Area Of Bar Is Damaged By More Than 25% ) By Cutting And Replacing The Same By A New Bar Of Requisite Diameter By Binding With Required Lap / Welding With Old Bar, Including Cost Of Reinforcement, Complete In All Respect Including Removing Unserviceable Materials From Site As Per Direction Of The Engineer - In - Charge.Note : Payment On Weight ( Kg. ) Of New Reinforcement 10 Brick Work With 1St Class Bricks In Cement Mortar ( 1:4 ) In Any Floor. 11 125 Mm. Thick Brick Work With 1St Class Bricks In Cement Mortar ( 1:4 ) In Any Floor. 12 Plaster ( To Wall, Floor, Ceiling Etc. ) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Including Throating, Nosing And Drip Course, Scaffolding / Staging Where Necessary ( In Any Floor ) . [ Excluding Cost Of Chipping Over Concrete Surface ] With 1:4 Cement Mortar. 20 Mm Thick Plaster. 13 Neat Cement Punning About 1.5Mm Thick In Wall, Dado, Window Sill, Floor Etc.In Any Floor.Note: Cement 0.152 Cu.M Per 100 Sq.M 14 Applying 2 Coats Of Bonding Agent With Synthetic Multi Functional Rubber Emulsion Having Adhesive And Water Proofing Properties By Mixing With Cement In Proportion As Per ManufacturerS Specification, In Any Floor. 15 Taking Out M.S. Or W.I. Grills From Wooden Frame Including Cutting Lugs From Masonry Wall And Refitting The Same And Mending Good Damages After Repairs, In Any Floor. 16 M.S. Or W.I. Integrated Grill As Per Approved Design, Joints Continuously Welded With M.S. Flats And Bars. In Any Floor. 17 Supplying, Fitting And Fixing Stainless Steel Railing Consist Of 38Mm Dia And 900Mm Height Vertical Balustrade At Every Two Alternative Steps, 50Mm Dia Top Rail, 3 ( Three ) Nos 19Mm Dia Horizontal Strainless Steel Pipe And Base / Cover Plate With Strainless Steel Grade 304 Containing 7.5% Nickle ( Interior Grade ) Brushed / Mat Finish, Complete As Per Direction Of The Engineer-In-Charge. Weight Of Strainless Steel Railing Per Metre 6.5 Kg ( Approx ) 18 Wood Work In Door And Window Frame Fitted And Fixed In Position Complete ( Including A Protective Coat Of Painting At The Contact Surface Of The Frame And Cost Of Concrete With M.S Clamps ) In Any Floor.Gamar 19 Labour For Taking Out Door And Window Frame Including Shutter For Repair Or Replacement Of Different Parts & Refixing The Same Including Mending Good All Damages Complete. 20 Easing Door And Windows. 21 Anodised Aluminium Barrel / Tower / Socket Bolt300 Mm Long X 10 Mm Dia. Bolt 22 Anodised Aluminium Butt Hinges Of Approved Quality Etc.100 X 75 X 4.0 Mm. 23 Scraping Of Moss, Blisters Etc.Thoroughly From Exterior Surface Of Walls Necessitating The Use Of Scraper, Wire Brush Etc. 24 Applying Decorative Cement Based Paint Of Approved Quality After Preparing The Surface Including Scraping The Same Thoroughly ( Plastered Or Concrete Surface ) As Per ManufacturerS Specification. One Coat On New Surface. 25 Applying Exterior Grade Acrylic Primer Of Approved Quality And Brand On Plastered Or Cencrete Surface Old Or New Surface To Receive Decorative Textured ( Matt Finish ) Or Smooth Finish Acrylic Exterior Emulsion Paint Including Scraping And Preparing The Surface Throughly, Complete As Per ManufacturerS Specification And As Per Direction Of The Eic. One Coat, In Any Floor. 26 Protective And Decorative Acrylic Exterior Emulsion Paint Of Approved Quality, As Per ManufacturerS Specification And As Per Direction Of Eic To Be Applied Over Acrylic Primer As Required. The Rate Includes Cost Of Material, Labour, Scaffolding And All Incidental Charges But Excluding The Cost Of Primer. Premium 100% Acrylic Emulsion. Two Coats, In Any Floor. 27 Applying Interior Grade Acrylic Primer Of Approved Quality And Brand On Plastered Or Cencrete Surface Old Or New Surface To Receive Decorativetextured ( Mattfinish ) Orsmoothfinishacrylicexterior Emulsion Paint Including Scraping And Preparing The Surface Throughly, Complete As Per ManufacturerS Specification And As Per Direction Of The Eic.; In Any Floor:One Coat 28 Acrylic Distemperto Interior Wall, Ceiling Without Acrylicprimer ( Asper ManufacturerSspecification ) Including Cleaning And Smoothning Of Surface; In Any Floor.Two Coats 29 Rendering The Surface Of Walls And Ceiling With White Cement Basedwall Putty Of Approved Make And Brand ( 1.5Mm Thick ) 30 Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc. Including Using Of Approved Putty Etc. On The Surface, If Necessary: On Timber Or Plastered Surface: With Super Gloss ( Hi-Gloss ) . Two Coats ( With Any Shade Except White ) 31 Painting With A Best Quality Synthetic Enamal Paint Of Approved Make And Brand Including Smoothing Surface By Sand Papering Etc. Including Using Of Approved Putty Etc. On The Surface, If Necessary : On Steel Or Other Metal Surface : With Super Gloss ( Hi-Gloss ) . Two Coats ( With Any Shade Except White ) 32 Priming One Coat On Any Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc. 33 Dismantling Artificial Stone Flooring Upto 50 Mm. Thick By Carefully Chiselling Without Damaging The Base And Removing Rubbish As Directed Within A Lead Of 75 M.; Ln Any Fioor 34 Supplying And Laying True To Line And Level Vitrified Tiles Of Approved Brand ( Size Not Less Than 600 Mm X 600 Mm X 10 Mm Thick ) In Floor, Skirting Etc. Set In 20 Mm Sand Cement Mortar ( 1:4 ) And 2 Mm Thick Cement Slurry Back Side Of Tiles Using Cement @ 2.91Kg. / Sqm , Laid After Application Slurry Using 1.75 Kg Of Cement Per Sqm Below Mortar Only, Joints Grouted With Admixture Of White Cement And Colouring Pigment To Match With Colour Of Tiles / Epoxy Grout Materials Of Approved Make As Directed And Removal Of Wax Coating Of Top Surface Of Tiles With Warm Water And Polishing The Tiles Using Soft And Dry Cloth Upto Mirror Finish Complete Including The Cost Of Materials, Labour And All Other Incidental Charges Complete True To The ManufacturerS Specification And Direction Of Engineer-In-Charged Joints Grouted With Admixture Of White Epoxy Grout Materials Of Approved Brand Including Spacer -2Mm As Directed And Removal Of Wax Coating Of Top Surface Of Tiles With Warm Water And Polishing The Tiles Using Soft And Dry Cloth Upto Mirror Finish Complete Including The Cost Of Materials, Iabour And All Other Incidental Charges Complete As Per Direction Of Engineerin- Charge.Ln Any Fioor; Size Not Iess Than 600Mmx 600 Mm X 9.5 Mm Thickwith Application Slurry @1.75 Kg / Sq.M, 20 Mm Sand Cement Mortar ( 1:4 ) & 2 Mm Thick Cement Slurry At Back Side Of Tiles, 0.2 Kg / Sq.M White Cement For Joint Filling With Pigment.Light Colour 35 Supplying, Fitting, Fixing Marble Slab / Tiles, 15 Mm. To 18 Mm. Thick In Dado / Wall In 15 Mm Thick [ Avg ] Cement Mortar ( 1:2 ) Including Making Suitable Arrangements To Hold The Stones Properly By Brass / Copper Hooks Applying White Cement Slurry @ 4.4 Kg / Sq.M At The Back Side Of Marble & Pointing In Cement Mortar ( 1:2 ) ( 1 Cement, 2 Marble Dust ) With Admixture Of Pigment Matching The Stone Shades Including Polishing All Complete As Per Direction Of The Engineer-In-Charge Including Cost Of Materials, Labours, Scaffolding, Staging, Curing Complete, In Any Floor. Udaypur Green; [ White Cement, Pigment To Be Supplied By The Agency ] 36 Supplying, Fitting And Fixing Black Stone Slab Used In Kitchen Slab, Alcove, Wardrobe Etc. Laid And Jointed With Necessary Adhesive Cement Mortar ( 1:2 ) Including Grinding Or Polishing As Per Direction Of Engineer-In -Charge In All Floor.Slab Thickness 20 To 25 Mm 37 Supplying, Fitting & Fixing 1St Quality Ceramic Tiles In Walls And Floors To Match With The Existing Work & 4 Nos. Of Key Stones ( 10Mm ) Fixed With Araldite At The Back Of Each Tile & Finishing The Joints With White Cement Mixed With Colouring Oxide If Required To Match The Colour Of Tiles Including Roughening Of Concrete Surface, If Necessary Or By Syntheticadhesive & Grout Materials Etc.Wallwith Sand Cement Mortar ( 1:3 ) 15 Mm Thick & 2 Mm Thick Cement Slurry At Back Side Of Tiles Using Cement @ 2.91 Kg / Sq.M & Joint Filling Using White Cement Slurry @ 0.20Kg / Sq.M.Area Of Each Tile Above 0.09 Sq.Mother Than Coloured Decorative Including White 38 Supplying& Laying 20 Mm Designer Chequered Tiles Of Any Shade And Of Approved Quality As Per Is: 1237: 1980 Laid In Patterns As Directed In Pavement, Footpath Including Necessary Underlay 25 Mm Thick Average Cement Mortar ( 1:3 ) Complete In All Respect With All Labour And Materials [ Using Cement Slurry @ 4.4 Kg / Sq.M At Back Side Of Tiles. ] 39 Supplying, Fitting And Fixing Marble Slab / Tile Of 15 To 18 Mm Thickness In Floor, Lobby, Stair, Skirting, Landing & Treads Etc. Over 20 Mm ( Av. ) Thck Base Of Cement Mortar ( 1:2 ) Laid With White Cement Slurry @ 4.4 Kg / Sq.M Before Placing Marble & Jointed With White Cement Slurry @ 2.0 Kg / Sq.M With Necessary Pigments Including Grinding And Granite Polishing As Per Direction Of Engineering -In -Charge In All Floor. { White Cement And Pigment To Be Supplied By The Agencywith Chawk Dungriarea Of Each Tile Exceeding 0.3Sq.M. But Not Exceeding 0.6 Sq.M 40 Supplying, Fitting And Fixing In Position Rcpc ( Reinforced Cement Polymer Concrete ) Drain Cover ( 5 Mt ) Without Frame. 41 Supplying, Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window Of All Aluminium Sections Viz. Window Frame ( Top, Bottom & Side Frame ) , Shutter ( Top, Bottom, Side & Interlock Member ) Made Of Aluminium Alloy Extrusions Conforming To Is 733-1983 & Is 1285-1975, Annodised Conforming To Is 1868-1983, Fitted With All Other Accessories Viz. Pvc Roller, Epdm Gasket, Maruti Lock, Screws Etc. Including Labour Charges For Fitting & Fixing Of Aluminium 2-Track / 3-Track Sliding Window With Fixing Of Glass ( Excluding Cost Of Glass ) All Complete As Per Architectural Drawings And Direction Of Engineer-In-Charge. 10-12 Micron Thickness Annodizing Film Natural White 42 Supplying, Fitting & Fixing Of Aluminium Fixed Partion Wall Of All Aluminium Sections Viz Top, Bottom And Side Member, Intermediate Member, Glazing Clip Made Of Aluminium Alloy Extrusions Conforming To Is: 733-1983 And Is: 1285-1975, Annodized Conforming To Is:1868- 1983, Fitted With All Other Accessories Viz. Epdm Gusket, Cleat, Angle Screws Etc. Including Labour Charges For Fitting And Fixing Of Aluminium Fixed Partition Wall With Glass / Panel Board All Complete As Per Architectural Drawings And Direction Of Engineer-In-Charge. ( Excluding Cost Of Glass / Panel Board, 10-12 Micron Thickness Annodizing Film. Natural White.For Unsupported Length Of Vertical Member Upto 1.50M. Height Of Bothends Of Vertical Member Restrained But Panel With In 0.90 Sqm 43 Supplying Bubble Free Float Glass Of Approved Make And Brand Conforming To Is: 2835-19874Mm Thick Coloured / Tinted / Smoke Glass. 44 Supplying Bubble Free Float Glass Of Approved Make And Brand Conforming To Is: 2835-1987 Etc.5Mm Thick Coloured / Tinted / Smoke Glass. 45 Supplying, Fitting And Fixing Stainless Steel Sink Complete With Wastefittings And Two Coats Of Painting Of C.I. Brackets. ( A ) Sink Only ( I ) 630 Mm X 550 Mm X 180 Mm 46 Labour For Dismantling Old Pipe With Fittings 47 Supply Of Upvc Pipes ( B Type ) & Fittings Conforming To Is-13592-1992. Single Socketed 3 Meter Length. 110Mm Dia. 48 Supply Of Upvc Fittings; 110Mm Diabend 87.5º 49 Supply Of Upvcfittings; 110Mm Diadoor Bend 87.5º 50 Supply Of Upvc Fittings; 110Mm Dia ; Plain Tee 51 Compact Ball Valve With Ss Handle For Cpvc / Upvc Fittings20 Mm Dia 52 Supplying, Fitting And Fixing Cp Sink Cock With Regular Swinging Spout ( Table Mounted Model ) ( Equivalent To Code No. 5357 Of Jaquar Or Similar Brand ) . 53 Labour For Fitting And Fixing U.P.V.C. Pipes For Above Ground Work Including Cost Of Jointing Materials Etc. Fitting And Fixing All Necessary Specials, Cutting Pipes, Cutting Holes In Walls Or R.C. Floor Where Necessary And Mending Good All Damages Excluding The Cost Of Masonry Or Concrete Work, If Necessary, But Including The Cost And Fitting And Fixing Holder Bat Clamps ( Any Floor ) Or For Underground Work Including Cutting Trenches Upto 1.5 Metre And Refilling The Same Complete As Per Direction Of The Engineer In-Charge. ( Payment Will Be Made On Centre Line Measurement Of The Total Pipeline Including Specials. Above Ground. 110Mm Dia. 54 Supplying, Fitting And Fixing Pvc Pipes Of Approved Make Of Schedule 80 ( Medium Duty ) Conforming To Astmd - 1785 And Threaded To Match Withgi Pipes As Per Is : 1239 ( Part - I ) . With All Necessary Accessories, Specials Viz. Socket, Bend, Tee, Union, Cross, Elbo, Nipple, Longscrew, Reducing Socket, Reducing Tee, Short Piece Etc. Fitted With Holder Batsclamps, Including Cutting Pipes, Making Threads, Fitting, Fixing Etc.Complete In All Respect Including Cost Of All Necessary Fittings Asrequired, Jointing Materials And Two Coats Of Painting With Approved Paintin Any Position Above Ground. ( Payment Will Be Made On The Centre Linemeasurements Of Total Pipe Line Including All Specials. No Separatepayment Will Be Made For Accesories, Specials. Payment For Painting Willbe Made Seperately ) Etc.20Mm Dia.

INR 500 /-

INR 42675.0 /-

INR 21.33 Lakhs /-

Name of Work:Renovation of the F-2 building in IIMC Campus

Sl. No.	Item Description
1	Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars,in any floor.
2	Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. Upto 150 mm. thick,in any floor.
3	Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. ,in any floor.
4	Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
5	Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound etc.
6	Hire and labour charges for shuttering with centering and necessary staging using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works,in any floor. 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
7	Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
8	Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size), in any floor, excluding shuttering and reinforcement.
9	Removing corroded worn out portion of reinforcement (when the area of bar is damaged by more than 25%) by cutting and replacing the same by a new bar of requisite diameter by binding with required lap / welding with old bar, including cost of reinforcement, complete in all respect including removing unserviceable materials from site as per direction of the Engineer - in - charge. Note : Payment on weight (Kg.) of new reinforcement
10	Brick work with 1st class bricks in cement mortar (1:4) in any floor.
11	125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in any floor.
12	Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (in any floor). [Excluding cost of chipping over concrete surface] With 1:4 cement mortar. 20 mm thick plaster.
13	Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.in any floor. NOTE: Cement 0.152 cu.m per 100 sq.m
14	Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with cement in proportion as per Manufacturer"s specification,in any floor.
15	Taking out M.S. or W.I. Grills from wooden frame including cutting lugs from masonry wall and refitting the same and mending good damages after repairs,in any floor.
16	M.S. or W.I. integrated grill as per approved design, joints continuously welded with M.S. flats and bars. in any floor.
17	Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)
18	Wood work in door and window frame fitted and fixed in position complete (including a protective coat of painting at the contact surface of the frame and cost of concrete with M.S clamps) in any floor.Gamar
19	Labour for taking out door and window frame including shutter for repair or replacement of different parts & refixing the same including mending good all damages complete.
20	Easing door and windows.
21	Anodised aluminium barrel / tower / socket bolt 300 mm long x 10 mm dia. bolt
22	Anodised aluminium butt hinges of approved quality etc. 100 x 75 x 4.0 mm.
23	Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.
24	Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer"s specification. One coat on new surface.
25	Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC. One Coat, in any floor.
26	Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Premium 100% Acrylic Emulsion. Two coats, in any floor.
27	Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorativetextured(mattfinish)orsmoothfinishacrylicexterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC.; In any floor: One Coat
28	Acrylic Distemperto interior wall, ceiling without acrylicprimer (asper manufacturer"sspecification) including cleaning and smoothning of surface; in any floor. Two Coats
29	Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5mm thick)
30	Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: On timber or plastered surface: With super gloss (hi-gloss). Two coats (with any shade except white)
31	Painting with a best quality synthetic enamal paint of approved make and brand including smoothing surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : With super gloss (Hi-gloss). Two coats (with any shade except white)
32	Priming one coat on any surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
33	Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.; ln Any Fioor
34	Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM , laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer"s specification and direction of Engineer-in-Charged joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin- Charge. ln Any FIoor; Size not Iess than 600mmX 600 mm X 9.5 mm thick With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. Light Colour
35	Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing complete, in any floor. Udaypur Green; [White cement, Pigment to be supplied by the Agency]
36	Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in all Floor. Slab Thickness 20 to 25 mm
37	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. WALL With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Area of each tile above 0.09 Sq.m Other than Coloured decorative including white
38	Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles.]
39	Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, skirting, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in all Floor. {White cement and Pigment to be supplied by the Agency With Chawk Dungri Area of each tile exceeding 0.3sq.m. but not exceeding 0.6 sq.m
40	Supplying, fitting and fixing in position RCPC (reinforced cement polymer concrete) Drain cover(5 MT) without Frame.
41	Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white
42	Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film. Natural white. for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90 sqm
43	Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 4mm thick coloured / tinted / smoke glass.
44	Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 etc. 5mm thick coloured / tinted / smoke glass.
45	Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only (i) 630 mm X 550 mm X 180 mm
46	Labour for dismantling old pipe with fittings
47	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Single Socketed 3 Meter Length. 110mm Dia.
48	Supply of UPVC fittings; 110mm Dia Bend 87.5º
49	Supply of UPVCfittings; 110mm Dia Door Bend 87.5º
50	Supply of UPVC fittings; 110mm Dia ; Plain Tee
51	Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings 20 mm dia
52	Supplying, fitting and fixing CP Sink Cock with Regular Swinging Spout (Table Mounted Model) (Equivalent to Code No. 5357 of JAQUAR or similar brand).
53	Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. Above Ground. 110mm Dia.
54	Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) etc.20mm Dia.