Border Security Force-BSF has published Tender For Construction Of 05 Nos Prefab Hut Barrack Of Size 6.10 X 19.52 M With Verandha At Karahalli Campus Under Stc Bsf Bangalore Sh Ei And Fans And Service Connection. Submission Date for this Tender is 18-12-2023. Barrack Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group B |
| 2 | Supplying and drawing following sizes of FRLS PVC insulated copperconductor, single core cable in the existing surface/recessed PVC/ steel conduit i/c dismantling the existing wire etc as required. a) 3 X 1.5 SQ MM |
| 3 | Supplying and fixing of following sizes of pvc conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit i/c dismantling the existing steel/PVC pipe as required a) 20 mm |
| 4 | Supplying and fixing following piano type switch/socket on the existing switch box/cover including connections and dismantling the existing etc as reqd. a) 5/6 amp switch |
| 5 | b) 3 pin 5/6 A socket outlet |
| 6 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. A) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 7 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting and dismantling the existing etc. as required. |
| 8 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 9 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 10 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 11 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 12 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 13 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 14 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 15 | Providing and fixing of 20 Watt LED batten lighting fixture with compact appearance, simple and versatile in nature directly on ceiling/ wall, including connections, testing and dismantling the existing complete etc. as required. Cat no CCS-102-20-65-SL-DP-NWH Make Cromptonor equivalent make of PHILIPS/Havells/Bajaj. |
| 16 | Supplying,installation,testing and commissioning of 230 V,50Hz, Ceiling fan 1200 mm sweep (pearl white) down rod upto 0.30 mtr length with hook and making connection with 1.5 sq.mm FRLS PVC isnulated copper conductor and dsimantling the existing complete etc. as required.Model No.Festiva ES/Festiva Prime ( Havells) or equivalent model & specification of Bajaj/Usha/Crompton/Havells make. |
| 17 | Supplying and fixing of10W LEDBulkhead luminaire in Plastic body directly on wall i/c making connection, testing and dismantling the existing completeetc. as required. Model No- LBHP-10-CDL Make Cromptonor equivalent make of Philips/Havells/Bajaj. |
| 18 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 19 | Providing and fixing of 40 Watt LED Street/security Light with innovative thermal management with power coated die cast housing, heat resitance, toughened clear glass cover with IP66 protection including connection, testing and commisioning complete etc as reqd. Cat no LSTS-40-CDL-Mmake Crompton or equivalent model & specification of philips/Havells/Bajaj |
| 20 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. A) 40 A, 16 KA, DPMCCB |
| 21 | B) 63 A, 16 KA, FPMCCB |
| 22 | C) 100 A, 16 KA, FPMCCB |
| 23 | SITC of water protected outdoor hut type compartmentalized double door cubical panel of 400mm depth size suitable for 415 Volt, 3 phases, 50 Hz made out of 2 mm thick CRCA sheet with required hardware duly painted with powder coated. The panel having 200/415V 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with required current carrying capacity bus bars with switchgears, separate detachable gland plate, including angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the panel with legs 600 mm long, hinged door, with locking arrangement for inside/outside separately, earth bar/stud, i/c grouting the legs in 1:3:6 cement concrete foundation complete as required with following instruments mounted on it. (Panel should beas per design &drawing approved by Engg in charge) Instruments(Inside/outside) i) 0-500 Volts, Digital voltmeter of size 96Sqmmx96 sqmm flush mounting type with Selector switch-01 Set AE make ii ) 0-200 Amps, Direct Digital Ammeter of size 96Sqmmx96sqmm flush mounting type with CTs coil iii) PVC Holder-01 No iv) 5/6 Amp Paino/Tongle Swicth v) Selector Switches vi)LED Pilot light (22.5 MM dia) with03 Nos with 6 amp MCB on door closure |
| 24 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. A) 3½ X 70 sq. mm (38mm) |
| 25 | B) 2 X 16 sq. mm (22mm) |
| 26 | C) 3½ X 35 sq. mm (32mm) |
| 27 | Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. |
| 28 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 29 | Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of3.5 X 70 SQ MM size in the existing DWC/GI pipe as required. |
| 30 | Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 x 70 Sq.mm size in the existing masonry open duct as required. |
| 31 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm |
| 32 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm |
| 33 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm |
| 34 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 35 | Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of3.5 X 35 SQ MM size in the existing DWC/GI pipe as required. |
| 36 | Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 x 35 Sq.mm size in the existing masonry open duct as required. |
| 37 | Supplying, Installation, Testing and Commissioning of Symmetrical 12 Mtr height High Mast suitable for 04 Nos 200 Watt each LED Flood light fixtures having following specifications including suitable feeder pillar with required control and power switchgears: - (i) High Mast Structure(a) material construction :- IS 2062/BSEN 10025 (b) Diameter:- Top- 100mm, Bottom- 310mm (c) Plate Thickness- 3mm (d) Cross Section – 12 side polygon (e ) Galvanisation- BS EN ISO 1461 (f) opening door – 1050 x 225 mm (g) Base plate Dia & Thickness – 445mm & 25mm (h) Lightning protection finial- G.I. Single spike (i) Max wind speed- 55m/sec (j) foundation bolt-04 nos (k) PCD of Foundation bolt-385mm (l) Type/dia/length-TS 600/24mm/850mm long (II)Luminaries :- (a) Material-40 NB ERW Class B-M.S. Pipe (b) Dia of Carriage ring- 450 mm (ID) (c) Constrcution- 4 Arm, Welded, 2Section (d) Capacity – 4 Luminaires (III) Cable- 5 core 2.5 Sqmm PVC flexible Cable (One Cable per mast) (IV) Winch :- (a) Type/SWL of winch- Double drum, SWL 150 KG (b) Method of operation :- Integral Motor (c ) Motor Capacity- 0.5 HP (d) No. of Speed- 6 Pole, Single Speed (V) SS Wire Rope:- (a) Grad- AISI 304, 7/19 construction (b) No. of Ropes :- Two continuous (c) Dia- 5mm (d) Breaking capacity- 1350 Kg x 2 (VI) Aviation:- Solar Light Make of HML :-Bajaj make or equivalent specifications of make Crompton/Philips/Transrail/ Crompton. |
| 38 | Providing and fixing of 200 watt LED Flood light fitting Integral Flood light comprising of Die cast aluminium control gear and LED Housing with toughened glass fixed with clamp and powder coated IP 66 suitable for HML pole with suitable clamp nuts and bolts including connection, testing & Commissioning complete etc as reqd Cat No. LFLN-200-CDL/60-HPM Crompton make or equivalent specifications of make of Philips/Trilux/Bajaj |
| 39 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil |
| 40 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 41 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns, etc. |
| 42 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 43 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 44 | Supplying and laying of multistranded multicore core copper unarmored flexible PVC Insulated & PVC Sheathedcable for interconnection of HML connection box to LEDsincluding connection complete etc as reqd. KEI make (A) 3 x 2.5 Sqmm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
