Tender For Addition / Alteration Of Building No.P-219A At Sma Varunapuri Under Age B/R-Ii Of Ge (Nw) Vasco. (Tender Id No. 2023_Mes_631821_1), vasco-Goa

Tender For Addition / Alteration Of Building No.P-219A At Sma Varunapuri Under Age B / R-Ii Of Ge ( Nw ) Vasco. ( Tender Id No. 2023_Mes_631821_1 ) ; 1 Dismantling Floor, Hearth Or Wall Tiling Incl Cement Mortar Bedding ( But Not Backing ) , Removing Serviceable Tiles To Store And Rubbish Off The Premises. 2 M&L Rendering 10Mm Thick In Cm 1:4 On Brick Work / Concrete Surface To Receive Tiles 3 M&L Screed Bed Or Bedding Layer Of Mortar 15Mm Thick To Rceive Floor Tiles In Cement Plaster 1:4 4 S & Fglazed Ceramic Tiles, Coloured Of Size 450 X 300 X 7Mm Thick With On Vertical Surfaces Such As Dado, Skirting Etc, Set And Jointed In Neat Cement Slurry And Pointed In White Cement To Match All As Specified. 5 S&F Coloured Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exceeding 0.18 Sqm But Notexceeding 0.36 Sqm, In Floors Etc, Setand Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match. 6 M & L Granite ( Of Any Type ) Work ( Table Rubbed And Polished ) 18-20 Mm In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar ( 1:4 ) Including Pointing In White Cement ( 1:2 ) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite. 7 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For 8 S&F Aluminium Powder Coated Window / Ventilators Shutter Including Frame, Any Type ( Sliding Or Openable ) With Frame, & Other Similar Work Etc. Fabricated By Using The Jindal / Hindal Co / Century Standard Section Including Necessary Arrangements To Receive 4Mm Thick Glass Or Wire Mesh With Aluminium Chanel Beading & Stainless Steelscrews Including The Cost Of Rubber Gasket / Rubber Beading Etc. Complete Including Necessary Handles, Roller Wheels, Hinges Etc Complete All As Specified And As Directed. ( Note :- Wt Of Aluminium Shall Be Measured Exclusive Of All Fittings Fixtures, Hinges, Handle, Bolts, Rubber Gasket / Rubber Beading And Locking Arrangements. ) 9 S&F Powder Coated Aluminium Grill Of Make Dg 104 ( 10Mm Thick ) With Dl 102 Frame. 10 S&F Sheet Glass Ordinery Quality, 4Mm Thick And Glazing With Oil Putty / Wooden Beads In Squars N Exc 0.5 Sqm Each. 11 S&F Aluminium Alloy Wire Mesh 0.45Mm Nominal Dia Of Wire And Avg Width Of Aperture 1.4Mm Cut To Size And Fixed To Doors / Window Shutters And Fixed With Aluminium Wire Staples As Ordered. 12 Excavation In Trenches N.Exc 1.5 M In Wide N.Exc 1.5 M Depth, For Foundations Etc Or For Shafts, Wells, Cesswpits, Manholes Getting Out In Hard / Dense Soil 13 M&L Pcc 1:4:8 Type D2 ( 40Mm Graded Aggregate ) As In Foundation. 14 M&L Precast Cement Concrete Block Masonary 1:3:6 Type C-1, Using 20 Mm Graded Stone Aggregat With Solid Blocks Exc 10 Cm In Width And Setting In Mort 1:6 Complete. 15 M&L Rendering 10 Mm Thick On Fair Faces Of Brick Work On Concrete Surfaces In Cm 1:6 To Be Finished Even And Smooth ( Without Using Extra Cement ) . 16 M&L Returning Filling Including Spreading Levelling Watering And Well Ramming In Layers Not Exc 25 Cm. 17 Removal Of Excavated / Demolished Material ( Soil ) Exc 250 And N.Exc 500M And Depositing Where Directed. 18 Taking Down Cement Plastering Of Any Description On Brick Or Stone Wall Etcincluding Rakingout Joints Hacking For Key Scrubbing Down With Water Etc And Removal Of Debries And Depositing Where Directed. 19 M & L For Rendering 10 Mm Thick In Cm 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement As N Walls. 20 M & L Rendering 15Mm Thick Plaster In Cm 1:4 In Two Coats ( 10Mm Thick Backing Coat +5Mm Thick Finishing Coat ) Finished Even And Smooth Without Using Extra Cement Incl Water Proofing Compound ( Dr Fixit Lw Oe Equv 200Ml Per Bag Of Cement ) 21 Supply Only Watrer Proofing Compound 22 M & L For Rendering 5 Mm Thick In Cm 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement As N Walls. 23 Preparing Newly Plastered Surfaces Of Wall And Applying Two Coats Of Oil Bound Distemperover A Coat Of Alkali Resistant Primer Over 3Mm Thick Wall Care Putty. 24 Preparing Newly Plastered Surfaces Of Ceiling And And Applying Two Coats Of Oil Bound Distemperover A Coat Ofover 3Mm Thick Wall Care Putty. 25 M&L For Preparing Newly Plastered Of External Wall Surface And Applying Two Coats Of100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm / Ltr And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Extrior Paint Of Required Shade ( Company Depot Tinted ) With Silicon Additives @ 1.43 Ltr / 10Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.9 Ltr / 10 Sqm 1Mm Thickness Putty Over New Surfacesas Directed By Engr-In-Charge All As Specified In ManufacturerS Instructions And To Be Applied Through Applicator Of Authorised Manufaturer With 5 Years Guarantee.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	09-Dec-2023	Revised BOQ Corrigendum	Other	20-12-2023
2	09-Dec-2023	Revised BOQ	BOQ	20-12-2023

INR 500 /-

INR 75000.0 /-

INR 37.37 Lakhs /-

NAME OF WORK : ADDITION / ALTERATION OF BUILDING NO.P-219A AT SMA VARUNAPURI UNDER AGE B/R-II OF GE (NW) VASCO. (Tender ID No. 2023_MES_631821_1)

Sl. No.	Item Description
1	Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
2	M&L rendering 10mm thick in CM 1:4 on brick work/ concrete surface to receive tiles
3	M&L screed bed or bedding layer of mortar 15mm thick to rceive floor tiles in cement plaster 1:4
4	S & Fglazed ceramic tiles, coloured of size 450 x 300 x 7mm thick with on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement to match all as specified.
5	S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but notexceeding 0.36 sqm, in floors etc, setand jointed in neat cement slurry and pointed in white or Coloured cement to match.
6	M & L Granite (of any type) work (table rubbed and polished) 18-20 mm in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
7	Dismantling wrought iron or mild steel work of any description not otherwise provided for
8	S&F aluminium powder coated window/ventilators shutter including frame, any type (sliding or openable) with frame, & other similar work etc. fabricated by using the JINDAL/HINDAL CO/CENTURY standard section including necessary arrangements to receive 4mm thick glass or wire mesh with aluminium chanel beading & stainless steelscrews including the cost of rubber gasket/rubber beading etc. complete including necessary handles, roller wheels, hinges etc complete all as specified and as directed. (Note :- Wt of aluminium shall be measured exclusive of all fittings fixtures, hinges, handle, bolts, rubber gasket/rubber beading and locking arrangements.)
9	S&F powder coated aluminium grill of make DG 104 (10mm thick) with DL 102 frame.
10	S&F sheet glass ordinery quality, 4mm thick and glazing with oil putty/wooden beads in squars n exc 0.5 sqm each.
11	S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and avg width of aperture 1.4mm cut to size and fixed to doors/window shutters and fixed with aluminium wire staples as ordered.
12	Excavation in trenches n.exc 1.5 m in wide n.exc 1.5 m depth, for foundations etc or for shafts, wells, cesswpits, manholes getting out in hard/dense soil
13	M&L PCC 1:4:8 type D2 (40MM graded aggregate) as in foundation.
14	M&L precast cement concrete block masonary 1:3:6 type C-1, using 20 mm graded stone aggregat with solid blocks exc 10 cm in width and setting in mort 1:6 complete.
15	M&L rendering 10 mm thick on fair faces of brick work on concrete surfaces in CM 1:6 to be finished even and smooth (without using extra cement).
16	M&L returning filling including spreading levelling watering and well ramming in layers not exc 25 cm.
17	Removal of excavated/demolished material (soil)exc 250 and n.exc 500M and depositing where directed.
18	Taking down cement plastering of any description on brick or stone wall etcincluding rakingout joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.
19	M & L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as n walls.
20	M & L rendering 15mm thick plaster in CM 1:4 in two coats (10mm thick backing coat +5mm thick finishing coat) finished even and smooth without using extra cement incl water proofing compound (Dr fixit LW oe equv 200ml per bag of cement)
21	Supply only watrer proofing compound
22	M & L for rendering 5 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as n walls.
23	Preparing newly plastered surfaces of wall and applying two coats of Oil bound distemperover a coat of alkali resistant primer over 3mm thick wall care putty.
24	Preparing newly plastered surfaces of ceiling and and applying two coats of Oil bound distemperover a coat ofover 3mm thick wall care putty.
25	M&L for preparing newly plastered of external wall surface and applying two coats of100% Premium acrylic emulsion paint having VOC less than 50 gm/ ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance extrior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10Sqm over and including priming coat of exterior primer applied @ 0.9 ltr/10 Sqm 1mm thickness putty over new surfacesas directed by Engr-in-Charge all as specified in manufacturer"s instructions and to be applied through applicator of authorised manufaturer with 5 Years guarantee.