Public Works Department-PWD has published Tender For Construction Of Ad Office Udhampur. Submission Date for this Tender is 14-12-2023. Building Work Tenders in udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
2 | Removal / disposal of surplus excavation earth by mechanical means upto a lead of 1km. |
3 | Providing and lying in position cement concreteof specified gradeexcluding the cost of centring and shuttering- all works upto plinth level. (crushedStone 40 mm nominal size) 1 cement 4 coarse sand: 8 graded, stone aggregates 40mm size crushed Stone. |
4 | Providing and laying Cement Concrete (1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size) in string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills,fillets etc upto floor V level etc. l, including curing but excluding the cost of centring, shuttering and finishing with. |
5 | Providing and laying in position specified grade of reinforced cement concrete M 20 Mix excluding the cost of centering, shuttering, finishing and reinforcement - All works upto plinth level: 1:1:5:3 (1 cement: 1:5 coarse sand:3 graded stone aggregate 20mm nominal size) |
6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) |
7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
8 | Providing and laying in position cement concrete of 1:3:6 grade (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) excluding the cost of centring andshuttering- All work upto plinth level. |
9 | Brickworkwith common burnt clay F.P.S (non modualar) bricks of class designation 75 upto plinth level in 1cement : 4 fine sand mortar. |
10 | Providing and laying damp-proof course 50 mm thick with cement concrete 1: 2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 nominal size) crushed aggregate |
11 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. |
12 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. |
13 | Cetring and shuttering including strutting, propping etc and removal of the form work for: |
14 | Foundation, footing, bases of columns |
15 | Wall (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
16 | Suspended floors, roofs, landing, balconies and access platforms. |
17 | columns, Pillars,Piers, Abutments, Posts and Struts. |
18 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
19 | Edge of slabs and break in floors and walls Under 20 cms wide. |
20 | Weather shade, chajjas, corcels etc., including edes. |
21 | Stairs, (excluding landings) except spiral staircases |
22 | Brickworkwith common burnt clay F.P.S (non modualar) bricks of class designation 75 in superstructureupto floor V level in 1cement : 6 fine sand mortar. |
23 | Half brick masonry with bricks of class designation 75 in foundations and plinth, and superstructure upto floor V level in Cement mortar 1:4 (1 cement: 4 coarse sand). |
24 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. |
25 | Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. |
26 | 15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 coarse sand) |
27 | Add for plaster drip course/groove in plastered surface of moulding to R.C.C. projections. |
28 | Making of Grove 12mm x10 mm between Brick and RCC. |
29 | Providing and laying vitrified floor tiles in Size of tile 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete |
30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
31 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
32 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) 18mm thick:- |
33 | Extra for providing edge moulding to 18 mm thick Granite stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
34 | Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble I stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. |
35 | Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.50 mmthick with 20mm nominal size stone aggregate. |
36 | Providing and fixing on wall face unplasticized - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm diameter |
37 | Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised- Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 1 0 mm gap for thermal expansion. |
38 | Coupler 110mm. |
39 | Single tee with door 110 x 110 x110mm |
40 | Bend 87.5* 110mm |
41 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
42 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood |
43 | Providing 40x5 mm flat iron hold fast 40 em long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) |
44 | Providing and fixing 35mm thickglazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. in Second Class Deodar Wood |
45 | Providing and fixing 35mm thick wire guage shutters using galvanised M.S. wire guage of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors, windows and clerestory windows with ISI marked M.S pressed but hinges bright finished butt hinges of required size with necessary screws, in Second Class Deodar Wood |
46 | Providing and fixing Glass panes weighing 13.75 kg/sqm with Deodar wood Fillets.(Area of opening for glass panes excluding portion inside rebate shall be measured). |
47 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1stclass hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
48 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. |
49 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
50 | Providing and fixing stainless steel tower bolt ISI marked of approved make with necessary screws etc. complete : |
51 | 200x10 mm |
52 | 150x10 mm |
53 | Providing and fixing stainless steel Aldrops ISI marked of approved make with necessary screws etc. complete :250X14 mm |
54 | Providing and fixing stainless steel Handles ISI marked of approved make with necessary screws etc. complete : |
55 | 150 mm |
56 | 100 mm |
57 | Providing and fixing stainless steel hanging floor door stopper lSI markedwith necessary crews etc. complete .Twin rubber stopper. |
58 | Providing and fixing stainless steel M.S. hasp and staple (Safety type) lSI marked with necessary screws etc. complete. |
59 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete : |
60 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary ccessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
61 | providing and fixing of stainless steel nevel post including top ball of aisi 304 grade of required height duli anchored to floor with dash fasteners . Height of the nevel post shall not be less than 1050mm above the finished squirting level all complete as per architectural drawing (including cost of material lead,lift,carriage at etc. |
62 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. |
63 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over andincluding one coat of special primer applied @ 0.75liter /10sqm |
64 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
65 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work ( wood work). |
66 | Providing and fixing of overhead signage boards made up of 2 mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-II of STM-D-4956-01 as approved by engineer in charge, letters, boarders etc. at entrance over pillars including Aluminium frame work |
67 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
68 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
69 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
70 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the walls wherever required : Size 600x450x200 mm |
71 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern. |
72 | Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects as per direction of Engineer-Incharge. |
73 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore |
74 | Providing & fixing C.P. brass robe hook fixed to wall/door with plastic rawl plugs andC.P brass screws including cutting and making good the walls wherever required as per direction of Engineer-Incharge. |
75 | Providing & fixing recessed liquid soap dispenseras per direction of Engineer-Incharge. |
76 | P/F of Soap Dish Holder with all fittings as per direction of Engineer-in-charge |
77 | Providing and fixing of Tumbler Holder with all fittings as per direction of Engineer-in-charge |
78 | Providing and fixing Bottle Trap and other ancillary fittings. Cutting and making good the walls wherever required compete as per directions of Engineer-Incharge. |
79 | Providing and fixing 6mm copper backed float glass mirror MODI / SAINT-GOBAIN including 6mm thick BWR type ply board, 40mm stainless steel channel plugged to wall, hard wood treated with two coats of wood preservative, etc. all complete as specified and to the satisfaction of Engineer in charge. |
80 | Providing and fixing CP brass towel rail of approved make complete with CP brackets fixed to wooden cleats with CP brass screws. |
81 | Providing and fixing 15 mm dia. C.P. brassbib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (Short Body) |
82 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
83 | Providing and fixingPVC pipes 6kg/cm2 pressure excluding pvc fittings, jointing with adhesive/seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion of approved make Supreme/Finolex/ Astral or equilant. |
84 | 110 mm dia |
85 | 80 mm dia |
86 | 160 mm dia |
87 | Providing and fixingPVC plain Bend of approved make Supreme/Finolex/ Astral or equilant complete. |
88 | 110 mm dia |
89 | 160 mm dia |
90 | Providing and fixingPVC Floor Trap of approved make Supreme/Finolex/ Astral or equilant complete. |
91 | 110 mm X 80 mm |
92 | 160 mm X 110 mm |
93 | Providing and fixingPVC Plain Tee of approved make Supreme/Finolex/ Astral or equilant complete. |
94 | 110 mm X 80 mm |
95 | Providing and fixingPVC Door Bend of approved make Supreme/Finolex/ Astral or equilant complete. |
96 | 110 mm |
97 | Providing and fixingPVC Door Tee of approved make Supreme/Finolex/ Astral or equilant complete. |
98 | 110 mm |
99 | Providing and fixingPVC Coupler of approved make Supreme/Finolex/ Astral or equilant complete. |
100 | 160 mm |
101 | Providing and fixingPVC Clamps for pvc pipes of approved make complete. |
102 | 110 mm |
103 | Providing and fixingPVC Cowl of approved make complete. |
104 | 110 mm |
105 | Providing and fixingC.P Jali of approved make complete. |
106 | 110 mm |
107 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, star, Lotous or equivalent having valid ISI license) (2000 ltr. Capacity 3 No.). |
108 | Cutting holes upto 30x30 cm in walls including making good the same with common burnt clay F.P.S.(non modular) bricks |
109 | Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 16 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. |
110 | 32 mm Diameter |
111 | 25 mm Diameter |
112 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
113 | Group C |
114 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
115 | 2x1.5 +1 1x1.5 sq. mm |
116 | 2 x 2.5 + 1x2.5sq. mm |
117 | 2 x 4.0 +1x4.0 sq. mm |
118 | 2 X 6.0 +1x6.0 sq. mm |
119 | 2 x 10.0 + 1x6.0 sq. mm |
120 | 4 x 6 sq.mm +2 X 6 sq.mm earth wire |
121 | 4 X 10 sq.mm +2 X 6 sq.mm earth wire |
122 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
123 | 20mm Conduit |
124 | 25mm Conduit |
125 | 40mm Conduit |
126 | deep junction box |
127 | surface junction box |
128 | 5” dia fan box |
129 | Supplying and fixing following size/modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
130 | 1 or 2 module ( 75mm x 75mm) |
131 | 3 Module (100mmX75mm) |
132 | 4 Module ( 125mm x 75mm) |
133 | 6 Module ( 200mm x 75mm) |
134 | 8 Module ( 125mm x 125mm) |
135 | 12 Module ( 200mm x 150mm) |
136 | Supplying and fixingon exisitng GI Box modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc as required. |
137 | Supplying and fixingon exisitng GI Box modular plate and cover in front on surface or in recess, including providing and fixing 5 pin5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc as required. |
138 | Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required |
139 | 5/6Amp Switch |
140 | 3 pin 5/6 Amp socket outlet |
141 | Telephone socket outlet |
142 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc., as required. |
143 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
144 | Installation, Testing and commissioning of pre-wired, fluorescent fitting of all types complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5sqmm FRLS PVC insulated , copper conductor, single core cable and earthing etc. as required. |
145 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
146 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
147 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
148 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
149 | 2 Pair |
150 | 4 Pair |
151 | Supplying and drawing of UTP 4 pairCAT 6A LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. |
152 | Supplying and fixing 5 amps to 32 amps 10kArating, 240 Volts, "C" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
153 | Single pole |
154 | Single pole & Neutral |
155 | Trip pole & Neutral |
156 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
157 | Providing and fixing M.V. danger notice plate of 200mm x 150mm , made of mild steel, at least 2 mm thick , and viterous enamelled white on both sides, and with inscription in single red colour on front side as required. |
158 | Supply, Installation, Testing and commissioning of following Distribution boards made of sheet steel in IP43construction with key lock with sheet metal door of Legrand(Ekinoxe3) or equivalent in Siemens/Schneider makes |
159 | 8 Way TPN |
160 | 6 Way TPN |
161 | Supply of following LED lighting fixtures |
162 | Supply of Wall / Ceiling Fans230V 50Hz celing fan with double ball bearing with low power consumptionof following sweeps: |
163 | 1200mmCeiling Fan |
164 | 400mm Wall Fan |
165 | Supply of following sizes of heavy duty exhaust fan as per approved makes |
166 | 450mm Sweep |
167 | 200mm Sweep |
168 | Supply of 1.1kV grade , XLPE insulated,Aluminium conductor, Heavy Duty , Armoured cables of following ratings as per IS : 7098 Part-1 with latest amendments. |
169 | 3.5C x 400sqmm |
170 | 3.5C x 120sqmm |
171 | 3.5C x 70sqmm |
172 | Supplying and Installing Following Size of Perforated Hot Dipped Galvanized Cable Tray with Perforation not more than 17.5% in convenient Sections ,joined with connectors ,suspended from the Ceiling including bolts and Nuts ,etc as required. |
173 | 300mm (W) x 50 mm (H)x 1.6 mm(T)cable tray Perforated type |
174 | Providingandfixing FireExtinguishers(A,B,Ctype powder)complete withallaccessories as per manufacturers specifications. |
175 | Supply, installation, testing and commissioning of 75 mm Cu. Pipe Filled with Crystalline conductive Mixture with Copper Strip of Size 40 mm x 6 mm of Length2 mtr with Ecofriendly Backfill Compound 50 Kg. Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance value & Earth pit chamber (300mm x 300mm) with CI cover for the above as required complete Job. |
176 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
177 | Supplying,Installation,Testing and Commissioning of CubicalTypeLT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars, etc. as required as per the Following Description.INCOMERi) MCCB 400 Amps 4 P with Breaking Capacity 36 KA(1 Nos)ii) Indicating Lamps RYB(1 Set) iii) Voltmeter-0-500 Volts &Ammeter (0-600 A) (1 No Each) iv)Selector Switch (2 Nos)&Current Transformer 500/5 A 10 VABurden"Class-1 v) Aluminium Busbar 600 Amps FP E-91 E Grade Electrolytic Aluminiumvi) Digital Load Manager ,SP MCB 2 A& ON/OFFTRIP (02 Sets) |
178 | OUTGOINGSi) MCB 100 Amps TPN C curv (36 Nos) ii) MCCB 100 Amps 4 P with Breaking Capacity 25 KA (1 Nos) v)Load Bearing Members to be made out of 2.0 mm CRCA Sheet. vi)Partitions to be made out of 1.6 mm CRCA Sheet & Gland Plates to be 3.0 mm Thick. |
179 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thickcompacted bed of fine sand, filling the joints with coarse sand etc. allcomplete as per direction of Engineer-in-charge. |
180 | Carriage of material by M.T inclloading/unloading& stacking complete |
181 | Sand av lead 54 km |
182 | Stone agg below 40 mm nominal size av lead 5 km |
183 | Bricks av lead 75 km |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail