|
| 1 | Dismantling of floor, walls, roof tiles including bedding but backing and rubbish off permises complete all as specified and directed |
| 2 | M&L for 10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqmset & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed |
| 3 | M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6for laying of floor tiles complete all as specified and directed |
| 4 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick(square / rectangular) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed |
| 5 | M&L for glazed ceramics coloured tiles of size 450x300x7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed |
| 6 | M&L for 10 mm thick randering in cement mortar 1 : 4for fixing of wall tiles complete all as specified and directed |
| 7 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 8 | M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and directed |
| 9 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed |
| 10 | M&L Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed |
| 11 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed |
| 12 | M&L10 mm thick rendering on fair faces of bk/concrete surfaces in CM (1:6) finished even and smooth (without using extra cement ) complete all as specified and directed |
| 13 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer\"s instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:Liquid WPC will be measured and paid separately. |
| 14 | Supply only liquid water proofing compound , ISI marked complete all as specified and directed |
| 15 | M & L for preparation of plastered surfaces ofwall & concrete and applying 1 mm thick wall care putty including preparation complete all as specified and directed |
| 16 | M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed |
| 17 | M&L preparation of new plastered or unplasteredsurfaces of wall and applying two coats of weather proof antifungal paint exterior emulsion Apex paint over & including one coat of primer complete all as specified and directed |
| 18 | M&L preparation of old decorated surfaces of ceilingand applying one coat of white wash complete all as specified and directed. |
| 19 | Taking down Chowkhats or frames not exc. 1.5 sq. m eachwith shutters (without taking off shutters from the frames) complete all as specified and directed |
| 20 | Taking down Chowkhats or frames exc 1.5 sqmnot e xc. 4 sq. m eachwith shutters (without taking off shutters from the frames) complete all as specified and directed |
| 21 | Cutting holes in brick walls exc 1/2 brick & n exc full brick built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of doors, windows & ventilator and making good dismantled portion in cement mortar 1:3 etc complete all as specified and directed |
| 22 | S&F pressed steel frame size (105 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hold fast hinges, lock strike plate, etc complete all as specified and directed |
| 23 | S & F factory made 35 mm thick plain, framed, panelled shutters (Three panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed. |
| 24 | S&F 30mm thick factory made second class hard wood glazed and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a). |
| 25 | M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)\" with including and fixing rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion complete all as specified and directed. |
| 26 | S&F aluminium powder coted ventilator louvers type frame top and bottom of size 31x42x1.60mm(sec no-20558) rectaular tube of size 40x20x2 mm (sec no-14019 and middle verticalof size 42x46.20x1.60mm sec(20560) and clip for fixing wiremesh and glass of size 19x17.30x0.90mm (sec no-19360)thick including and fixingstainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with neccessary rubber beading ,gasket etcincluding necessary plaster, painting ,cill and making good to disturbed portioncomplete all as specified and directed |
| 27 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 28 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening complete all as specified and directed |
| 29 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed |
| 30 | S&F in repair Harrison rails, anodised aluminium alloy , chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed |
| 31 | S&F for sliding door bolt of Aluminium alloy anodised 250 mm complete all as specified and directed |
| 32 | S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm complete all as specified and directed |
| 33 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed |
| 34 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 35 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed |
| 36 | S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed |
| 37 | Dismantling PVC water tanksExc 250 ltrs but not 500 ltrs including taking down of float valve and removing from site complete all as specified and directed |
| 38 | S&F500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 complete all as specified and directed |
| 39 | S&F in repair ball valve/float ballhigh pressure of PTMT 20mmwith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc complete all as specified and directed |
| 40 | Taking upor down steel tubing and connections with all fittings for 15 mm bore GI tubing complete all as specified and directed |
| 41 | Taking upor down steel tubing and connections with all fittings for 20 mm bore GI tubing complete all as specified and directed |
| 42 | S&F including medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed |
| 43 | S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed |
| 44 | S&Fin repair bib tap 15 mm bore fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed |
| 45 | S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed |
| 46 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed |
| 47 | S&F in repair for 15 mm bore fancy type Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixedcomplete all as specified and directed |
| 48 | S&F for in repair Brass chromium plated shower rose 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed |
| 49 | S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed |
| 50 | S&F in repair vitereous china wash basin, white flat back,size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, incl 32 mm diabrass CP waste fittings (coupling)including32 mm waste pipe complete all as specified and directed |
| 51 | Supply only15mm dia pillar taps cast copper alloy chromium plated ,screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm) complete all as specified and directed |
| 52 | S&F in repair of cabinet mirror of selected quality glass, mounted pvc board including shelf assembly complete all as specified and directed |
| 53 | S&F in repair vitreous china squating pan \"Orissa\" pattern WC size 580x440 mm white with integral foot rest and trap andincluding connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 54 | S&Fin repair vitreous china wash down water closet pan (Pedestal pattern)white including fixing bolt and plastic water closet seat white closed pattern with flat bottom cover with MS chromium plated hinging devices to matching colour complete all as specified and directed |
| 55 | S&Fin repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed |
| 56 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 57 | Supply only PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed |
| 58 | Taking down AC/PVCpipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mmdia pipe complete all as specified and directed |
| 59 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed |
| 60 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed |
| 61 | M/L PVC(SWR) bend of110mm dia of any radius etc complete all as specified and directed |
| 62 | M/L PVC(SWR) Tee of110mm dia etc complete all as specified and directed |
| 63 | S&F PVC (SWR) bends any radiusprovided with access door of 75 mm dia complete all as specified and directed |
| 64 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed |
| 65 | S&F PVC (SWR) multi floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed |
| 66 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete all as specified and directed |
| 67 | M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed |
| 68 | M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed |
| 69 | Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level complete all as specified and directed |
| 70 | M&L for 50mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interwal and corner complete all as specified and directed. |
| 71 | S&F for magnet door catchersuitablefor cabinet, complete all as specified and directed |
| 72 | S & F for Continuous (piano) hinges of width 30 mm, mild steel, bright finish or electrogalvanised complete all as specified and directed |
| 73 | S&F for 100 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed withscrews complete all as specified and directed |
| 74 | S&F 18 mm thick factory made PVC sheet one side pre-laminated sheet cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as specified and directed |
| 75 | S & F factory made PVC shelf/partition of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc complete all as specified and directed |
| 76 | Dismantling timber scantlings as in framed work 40 sq. cm and over in section, in any position complete all as specified and directed |
| 77 | S&F for MS framed works as intrusses, purline, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried complete all as specified and directed |
| 78 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 79 | Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including ridge ofsame colourfixed with self tapping screws complete all as specified and directed |
| 80 | M&L Water proofing treatment on \"Non approachable / non accessible and approachable roof\" surface (Horizontal, sloped& Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment,properly cleaning & drying the concrete surfaces complete all as specified and directed.(i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm. (ii)Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.(iii) Laying /unrolled over the bitumen coated surface, APPbasedpolymericmembraneminimumweighing3kg/sqmandminimum3mmthickreinforced with polyster non wove fabric (wt. notless than 150 gms/sqm)land on primed surfaceby forced application complete all as specified with 100 mm over laps shall be sealed by flame complete all as specified and directed. |
| 81 | Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc complete all as specified and directed. |
| 82 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 83 | Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 84 | Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M Gaya complete all as specified and as directed. |
| 85 | Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesand deposit to MES store yard of AGE E/M Gaya complete all as specified and as directed. |
| 86 | Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M Gaya complete all as specified and as directed. |
| 87 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts gradeISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked including sunk in anodized pressed steel box 1.60 mm thick, 60 mm deep for housing switch socket etc withwhite laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi strandedcopper conductor 1.5Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminalincludingcutting, chasses and makinggooddisturbed surface to match with existing finish with plasterfor one light point controlled by one, one way switch 5 Amps complete all as specified and directed. |
| 88 | All as per item Noabove but one fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator. |
| 89 | All as per item Noabove but one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 90 | All as per item Noabove but one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 91 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts gradeISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches,including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly includingcutting, chasses and makinggooddisturbed surface to match with existing finish with plasterfor one light point controlled by one, one way switch 5 Amps complete all as specified and directed |
| 92 | All as per item Noabove but one fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator. |
| 93 | All as per item Noabove but one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 94 | All as per item Noabove but one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 95 | All as per item Noabove but one bell point controlled by one, bell switch 5 Amps |
| 96 | Description all as per item No 9 here in before butusing 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathedas earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed |
| 97 | Description all as per item No 9 here in before butusing 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of4.0 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathedas earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed |
| 98 | S & F for switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed. |
| 99 | S & Ffor socket outlet 2-in-1, 5 pin, 5 amp, 230 Volts complete all as specified and directed. |
| 100 | S & Ffor ceiling rose, surface Bakelite with 3 terminals, ISImarked for batten fitting complete all as specified and directed |
| 101 | S & Ffor stepped type electronic fan regulator flushType complete all as specified and directed. |
| 102 | S & Ffor modular switch flushtype, single pole, one way, and 5/6 Amp single module complete all as specified and directed |
| 103 | S & Ffor modular switchflush type, single pole, one way, and 15/16 Amp single module complete all as specified and directed |
| 104 | S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed |
| 105 | S & Ffor modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed |
| 106 | S & Ffor modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed |
| 107 | S & Ffor Bell push modular 6 Amps single module complete all as specified and directed |
| 108 | S & Ffor lamp holder, PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed |
| 109 | S & Ffor modular type TV Socket out let complete all as specified and as directed. |
| 110 | M & L forSub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etctwo runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed.Note:- Four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 111 | M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 112 | S & F for sheet metal enclosure MCBDBTPN4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 113 | S & FforMCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 114 | S & Ffor MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 115 | S & Ffor metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Ampsincluding removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed |
| 116 | S & F for water heater storage type (Geyser) vertical/ Horizental type as per site requirement with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts,BEE 5 star rated, ISI markedincluding 04 Nos of hold fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & coldfor Officers JCO\"s and OR Md Accn complete all as specied and as directed |
| 117 | S & F for ceiling fan, 230 Volts, 1200 mm sweep with service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal complete all as specified and as directed. |
| 118 | S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed |
| 119 | S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and directed |
| 120 | S & F forLED tube light fitting 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cableof suitable sizefrom ceiling rose to fitting complete all as specified and directed. |
| 121 | S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation andnecessary mounting arrangements , provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and directed |
| 122 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed |
| 123 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed |
| 124 | S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecomplete all as specified and directed.(Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be includedin overall rate quoted). |
| 125 | S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connectionsincludingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed. |
