Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-12-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-01-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling of brick tiles single layer as in roof covering all as specified |
| 2 | Demolition of mud in roofs any thickness all as specified. |
| 3 | Material and labour for Wire brushing and cleaning top surface of cement concrete, including flashing and junction of parapets etc. complete all as specified and directed |
| 4 | Material and labour for Brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed |
| 5 | Material and labour for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof padding, laid to slopes, surface finished even and smooth without using extra cement average thickness of concrete 50mm complete all as specified and directed |
| 6 | Material and labour for applying a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20kg/sqm over a coat of primer @0.3 litre per sqm over the roof surface including cleaning surfaces complete all as specified and directed |
| 7 | Material and labour for APP based polymeric membrane minimum weighing 3.4Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms /sqm) land on primed surface by forced application complete all as specified |
| 8 | Material and labour for 40mm thick tiles are laid on bedded in cement mortar (1:6) 15mm thick and joints grouted flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed |
| 9 | All as per srl item No 08.00 here-in-before but except tiles |
| 10 | Material and labour for flush pointing to brick roof tiles including of joint in cement mortar 1:3 complete all as specified |
| 11 | Material and labour for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof kerbs PCC as in kerbs/covet fillet complete all as specified |
| 12 | Demolition of cement concrete any description in any position not otherwise specifically provided for complete all as specified and directed |
| 13 | Material and labour for cement concrete 1:5:10 type E-2 (using 40 mm graded brickaggregate) as in sunken flooring complete all as specified and directed |
| 14 | Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:-(i)The top surface of the sunken RCC slab shall be laid with cross slope as indicated in drgs towards the spouts. The min thickness of the RCC slab shall be as specified in drg.(ii) PCC 1:1.5:3 fillets at corners with 12.5mm graded aggregate shall be provided.(iii) Plastering in CM (1:3) 15mm thick with WPC on walls as well as on sunken floor finished even and smooth using extra cement.(iv)GI Pipe 40mm dia medium grade be inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe upto two storey construction and 25cm beyond two storey construction.(v) After doing the plaster, testing be carried out by ponding (for 72 hrs) the sunken portion before further treatment to the sunken slabs. Any leakage/seepage observed shall be rectified before carrying out water proofing treatment.(vi) Two component Acrylic modiied Cementitious coating:- |
| 15 | (aa)The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cementlaitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture\"s published literature should be strictly complied with, including but not limited to the following:-(bb)Chipping out any visible cracks in \"V-Groove\" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required.(cc)Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO.(dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer\"s instructions. (ee)Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. |
| 16 | (ff) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer\"s instructions on the entire area.(gg) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat.(hh)The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces.(jj) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.(kk)A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. |
| 17 | Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645.(ll)All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP.(mm) The membrane has to be protected in accordance with the manufacturer\"s recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer\"s recommendations.(nn) Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer\"s and approved by GE.(vii) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealent.(viii) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min15cm) all around. |
| 18 | Material and labour for GI pipe 50mm dia medium grade as in spout fixed at bottom at sunken slab complete all as specified and directed |
| 19 | Taking down of cement plaster on brick wall of any description thickness including racking out joints, hacking for key scrubbing down with water and prepared to receive plaster complete all as specified |
| 20 | Material and labour for 5mm thick cement plaster in cement mortar 1:3 as on ceiling, soffits of RCC shelves,surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | Material and labour for 15mm thick rendering in cement mortar (1:4) on brick work or concrete surfaces finished fair and even complete all specified and directed. |
| 22 | Material and labour for rendering 12 mm thick in Cement Mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth, without using extra cement complete all as specified and as directed |
| 23 | Material and labour for 15mm thick plaster in CM 1:3two layers, first layer of 10mm thick plaster in cement mortar 1:4 & second layer of 5mm thick in cement mortar 1:3 as in chajjas, beam balcony fins, parapet, projectionsetc with dubbing out average on irregular face of walls top layer of plaster finished even & smooth without using extra cement complete including cleaning and preparation of existing RCC surfaces and applying a coat of cement slurry complete all as specified and directed |
| 24 | Material and labour for preparation of newly plastered surfaces and applying three coat of white wash on ceiling all as specified |
| 25 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified |
| 26 | Material and labour for preparation of newly plastered surfaces of walls and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed |
| 27 | Material and labour for preparation of old surfaces and applying one coats of white wash on plastered surfaces of ceiling complete all as specified |
| 28 | Material and labour for complete removal of existing finishof walls and preparation of surface including applying 1mm thick wall care putty on wall and applying two coat of oil bound distemper over a coat of primer all as specified |
| 29 | Material and labour for complete removal of existing finishof walls and preparation of surface of walls with Acrylic Smooth exterior paint of required shade over two coats of exterior primer complete all as specified and directed |
| 30 | Dismantling floor hearth or wall tiling/china mosaic including cement mortar bedding (but not backing ), removing serviceable tiles to store andrubbish off the premises complete all as specified |
| 31 | Material and labour for non-skid coloured ceramic tiles7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed |
| 32 | Material and labour for glazed ceramic coloured tiles (premium quality) in vertical surface such as skirting/ dado etc of size 450 x 300 x 7mm thick set and jointed in cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick plaster in CM 1:4 to receive the tiles complete all as specified and directed |
| 33 | Material and labour for vitrified ceramic tiles light shed 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bedding layer in cement mortar 1:6complete all as specified and directed |
| 34 | Material and labour for vitrified ceramic tiles light shed 10mm thick (for vertical surfaces)polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in whiteor coloured cement to match laid over including 10mm thick screed bedding layer in cement mortar 1:4 walls, finished even and rough to receive the top layercomplete all as specified |
| 35 | Material and labour for 18-22mm thick machine cut kota stoneflooring laid andjointed with neat cement slurry mixed with pigment to match the shade of the slab laid over 20mm thick bedding layer in cement mortar 1:6 including rubbing and polishing complete all as specified |
| 36 | Material and labour for 18-22mm thick machine cut kota stone as in vertical surfaces risers of steps, skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete all as specified |
| 37 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) all as specified. |
| 38 | Material and labour for 75mmthickPCC 1:3:6type B-1 as in plinth protection finished surface even and smooth with using extra cementcomplete all as specified and directed |
| 39 | Material and labour for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished rough to receive top layer complete all as specified and directed |
| 40 | Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed |
| 41 | Material and labour for 60mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and directed |
| 42 | Material and labour for coloured cement concrete chequered tiles 300 x 300 x 22mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 15mm thick screed bed to floor finishes in CM 1:4 complete all as specified and directed |
| 43 | Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed Note : Reinforcement where provided shall be measured and paid separately. |
| 44 | Taking down chowkhats or frameswith shutter (without taking off shutters form the frames) area not exc 1.5 sqm each and removal to storecomplete all as specified and directed. |
| 45 | Taking down chowkhats or frameswith shutter (without taking off shutters form the frames) areaexc 1.5 sqm but n.exc 4.0 sqm each and removal to storecomplete all as specified and directed |
| 46 | Refixing of shutters of any description exc 1.0 sqm but n.exc 2.0 sqm each, in same opening including taking down all as specified and as directed |
| 47 | Supply and fixing Pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 48 | Supply and fixing Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed size 125 x 60mm complete all as specified and directed |
| 49 | Material and labour for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and directed |
| 50 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain, colour PVC sheet reinforced with MS square tube, supplying and fixing opening as per specification and drawing |
| 51 | Supply and fixing 30mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC “C” channel having strip of 20 mm width stuck inside with solvent cement rail on either side and as gap inset for top rail and bottom rail, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supply and fixing in the frame and site as specification all as specified. |
| 52 | Supply and fixing 100mm sizemild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed |
| 53 | Supply and fixing 75mm but hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed for PVC doors complete all as specified and directed |
| 54 | Supply and fixing 30mm continuous (piano) hinges, mild steel, bright finish or electro galvanised al as specified and directed |
| 55 | Supply and fixing aluminum anodised barrel tower bolt 125 mm long of extructed section complete all as specified and directed |
| 56 | Supply and fixing aluminum anodised handle cast type 125 mm, anodised complete all as specified and directed |
| 57 | Supply and fixing 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and metered beads for securing glass etc size of member all as per clause 8.23 (a) of SSR Part-I complete all as specified and directed |
| 58 | Supply and fixing 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed |
| 59 | Supply and fixing 35mm thick 2nd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated complete all as specified |
| 60 | Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mmx20mmand 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter :- (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 Nos per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf(d) z section 20mm x 25mm, 100mm long stopper - 01 No per leaf (f) MS box type hinges of size 75mm x 12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07.Note: glass pans and painting shall be measured & paid separately under respective item of schedule |
| 61 | All as per Srl item No. 57.00 here-in-before but window with glazing bars but without sash bars. Note wire gauge and painted shall be measured and paid separately under respective item of schedule |
| 62 | All as per Srl item No. 57.00 here-in-before but as in Ventilators |
| 63 | Material and labour for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railings and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed |
| 64 | Supply and fixing galvanized mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed |
| 65 | Supply and fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each panes complete all as specified |
| 66 | Supply and fixing 3mm thick figured glass pinhead type in squares n.exc 0.5 sqm each pane complete all as specified and directed |
| 67 | Cutting holes in brick wallsexc half brick but n.exc on brick built in cement mortar for inserting hold fast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed |
| 68 | Material and labour for treating small article such as stops, covers, gully, gratings and hold fast ends & post backs of chowkhat etc tarred area n.exc 0.10 Sqm each complete all as specified and directed |
| 69 | Supply and fixing aluminum alloys anodised sliding door bolt with hasp, staples 300mm (Bolt Type) and fixing clip of sheet cast or extructed sectionand fixing bolt and sliding bolt of extructed section or cast aluminum alloys and fixed complete all as specified and directed |
| 70 | Supply and fixing 200mm long aluminium anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 71 | Supply and fixing aluminum anodised handle fabricated type 150mm, anodised complete all as specified and directed |
| 72 | Material and labour for 18/19mm thick in repair Block board grade 2,interior grade ,decorative type with decorative face veneers on one faces fixed with screw to timber/steel frame work as in cupboard partition, shelves etc all as specified |
| 73 | Material and labour for preparation of newly wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed |
| 74 | Material and labour for preparation of newly steel surfaces of any description over 10cm width or girth and applying twocoats of synthetic enamel paint complete all as specified and directed |
| 75 | Material and labour for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 76 | Material and labour for preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 77 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.. |
| 78 | Material and labour for brick work with fly ash brick, straight or curved on plan exc 6m mean radius built in CM 1:6complete all as specified and directed |
| 79 | Material and labour for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar 1:4complete all as specified and as directed |
| 80 | Material and labour for 25mm dia stainless steel pipe curtain rod fixed with & includingSS powder coated hooks/brackets , shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall complete all as specified |
| 81 | Supply only finials for curtain rod as approved by GE complete all as specified and directed. |
| 82 | Taking down old GI tubing and connection including fittings 15mm bore pipe complete all as specified and as directed. |
| 83 | Supply and fixing 15mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors, complete all as specified and directed. |
| 84 | Taking down old GI tubing and connection including fittings20mm bore pipe complete all as specified and as directed. |
| 85 | Supply and fixing 20mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors, complete all as specified and directed. |
| 86 | Supply and fixing in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure withcapstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed |
| 87 | Supply and fixing in repairs Stop valve cast copper alloychromium plated with long shank and cup (concealed type) screwed down high pressure with capstan headedscrewed both ends for iron pipe or for union and fixed 15mm borecomplete all as specified and directed |
| 88 | Supply and fixing in repairs 15mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe in repairs complete all as specified and directed |
| 89 | Supply and fixing in repairs WHB mixer chromium plated brass, size 15mm bore screwed down high pressure with lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipecomplete all as specified anddirected |
| 90 | Supply and fixing in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower with & including handshower (health faucet) ABS body including 8mm dia flexible tube 1m long & wall hook complete all as specified |
| 91 | Supply and fixing chromium plated health faucetfor EWC with 1m long CP tube with CP wall hook superior quality complete all as specified |
| 92 | Supply and fixingCP jet spray with holder for EWC 1.5mtr long complete all as specified & directed |
| 93 | Supply and fixing in repairs Vitreous China wash down water closet white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at topincluding fixing bolt Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device fixed complete all as specified and directed |
| 94 | Supply and fixing in repairs PVC 10 litre symphonic action type flushing cistern, low level with inlet, ball valve, float and handle (ISI Marked) including brackets, flush pipe PVC 32mm bore and connection to WC complete all as specified and directed |
| 95 | Supply and fixing in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and directed |
| 96 | Supply and fixing PVC connection 450mm long, 15mm size with PTMT nuts complete all as specified |
| 97 | Supply and fixing in repairs bevelled edge looking mirror of selected quality glass, 5.5mm thick of size 450 x 600mm,PVC moulded case mounting on 6mm thick AC building board or commercial ply wood on back and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs, complete all as specified and directed |
| 98 | Supply and fixing in repairs Chromium plated brass shower rose, swivel type of size 150mm x150mm fixed to pipe complete all as specified and directed |
| 99 | Supply and fixing in repairs toilet cabinet made out of white acrylic sheet 1.50mm thick of size 450 x 300 x 90mm with looking mirror 450 x 270mm fixed on the shutter and with suitable shelving arrangement in replacement of existing wooden cabinet/ mirror and repairing the disturbed surface to match with existing complete all as specified |
| 100 | Supply and fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guards and railing 60cm long complete all as specified. |
| 101 | Supply and fixing Soap dish, stainless steel approx size 160mm x 160mm x 90mm complete all as specified and directed. |
| 102 | Supply and fixing Brass chromium plated tubular 20mm dia D type towel rail 600mm long complete all as specified and directed. |
| 103 | Supply and fixing chromium plated grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed. |
| 104 | Supply and fixing in repair glass corner shelf including CP railing, radius 300mm complete all as specified and directed |
| 105 | Supply and fixing in repair stainless steel paper holder, fixed with gutties and steel screws on wall fixed complete all as specified |
| 106 | Supply and fixing in repair 32mm dia PVC waste pipe for WHB complete all as specified. |
| 107 | Supply and fixing low density polyethylene (HDPE) 40mm pipes of pressure rating 6kgf/sqcm complete all as specified |
| 108 | Dismantling of cast iron drain pipe jointed with cement mortar/lead joint and taking out from wall/floor if reqd 75/100mm complete all as specified and directed |
| 109 | Supply and fixing cast iron sandcast soil waste pipes of size 100mm in any lengthwith or without ears, with cement joints fixed to walls complete all as specified |
| 110 | All as per Srl item No. 106.00 here-in-before but as in floor |
| 111 | Supply and fixing cast iron sandcast soil waste pipes of size 75mm in any lengthwith or without ears, with cement joints fixed to walls complete all as specified |
| 112 | All as per Srl item No. 108.00 here-in-before but as in floor |
| 113 | Supply and fixing cast iron cowls 75mm size complete all as specified and directed |
| 114 | Supply and fixed cast iron floor trap with grating including to waste pipe in 75mm fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed |
| 115 | Supply and fixing 100mm CI bends rest complete all as specified |
| 116 | Supply and fixing 75mm CI bends withrest complete all as specified |
| 117 | Supply and fixing cast iron branch pipes, single (equal or un equal) ordinary or inverted (spigot or socket type) or with parallel branches for 100mm bore pipe fitted with oval access doors complete all as specified and directed |
| 118 | Supply and fixing cast iron branch pipes, single (equal or un equal) ordinary or inverted (spigot or socket type) or with parallel branches for 75mm bore pipe fitted with oval access doors complete all as specified and directed |
| 119 | Supply and fixing bends (any radius),diminishing pieces or tapers 100mm bore complete all as specified and directed |
| 120 | Dismantling of water tanks any type of capacity exc 250 ltrs but n.exc 500 ltrs and removing to store complete all as specified and directed |
| 121 | Supply and fixing 500 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position any description complete all as specified |
| 122 | Supply and fixing 20mm bore brass ball valve high pressurewith epoxy coated aluminium rod & high density polythene float balland fly nut screwed for iron pipe complete all as specified. |
| 123 | Supply and fixing in repair 20mm bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed |
| 124 | Supply and fixing PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid inin floors complete all as specified and directed |
| 125 | Supply and fixing PVC (SWR) bends any radius 110mm dia complete all as specified and directed |
| 126 | Material and labour for reinforced cement concrete 1:1.5:3 using 20mm graded stone aggregate as in slabs, lintels, beams, in floors, roofs, landing, balconies, canopies, and shelves and the like complete all as specified and directed |
| 127 | Fair finish form work to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams etc. complete all as specified and directed. |
| 128 | Supply and fixing Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 129 | Taking down carefully existing point wiring of any type (i.e. on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings and fixtures such as ceiling rose, electric fittings, holders, switches, sockets etc including accessories such as wooden gutties/ rawal plug, screw etc includingremoving materials from site keeping side serviceable material tube lights in safe custody for reuse at site,to taking unserviceable materials as sch of credit and making good to disturbed surface of walls, floors etc. complete all as specified and directed |
| 130 | Material and labour for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, multi stranded copper conductor single core FRLScable, IS-694 marked, drawn throughexisting non metallic rigid PVC concealed conduit of any dia and in and including modular metal flush mounting box withwhite cover plate with frame of suitable module,screws and washers including 1.5 Sqmm multi stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for one light point/fan/bell controlled by one switch SP one way. |
| 131 | All as per srl item No. 127.00 here-in-before but for one socket outlet 5 Amps on independent board complete all as specified |
| 132 | All as per srl item No. 127.00 here-in-before but for one socket outlet 5 Amps on sameboard controlled with other switch complete all as specified |
| 133 | All as per srl item No. 127.00 here-in-before but with 2.5 Sqmm(nominal area) FRLS copper conductor unsheathed cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathedFRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge. |
| 134 | Material and labour for point wiring with 4 Sqmm, PVC insulated but unsheathed, multi stranded copper conductor single core FRLScable, IS-694 marked, drawn through in and including non metallic rigid PVC concealed conduit of suitable dia,screws and washers including 4 Sqmm multi stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for AC point controlled by one MCB SP one way. |
| 135 | Supply and fixing whitemodular switch 6 Amp one way one module complete all as specified and directed |
| 136 | Supply and fixing whitemodular switch 16 Ampwith indicator complete all as specified and directed |
| 137 | Supply and fixing white modular bell push switch 6 Ampwith indicator complete all as specified and directed |
| 138 | Supply and fixing whitemodular socket 6 Amp 250 V AC, 2in1 socket with shutter combined two module complete all as specified and directed |
| 139 | Supply and fixing whitemodular socket 6/16 Amp 250 V AC, twin socket combined two module complete all as specified and directed |
| 140 | Supply and fixing whitemodular fan regulator, step type, 5 steps, two module complete all as specified and directed |
| 141 | Supply and fixing in replacement for ceiling rose surface type bakelite 65 x 50 mm three terminal complete all as specified. |
| 142 | Supply and fixing in replacement Bell electric AC (Ding Dong) 240 volt SP complete all as specified |
| 143 | Material and labour for submain wiring with two run of single core FRLS, PVC insulated unsheathedmultistranded copper conductor cable of size 6 Sqmm drawn through in existing PVC rigid non metallic concealed conduit including one run of earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cableof size 6 Sqmm with green insulationincluding taking down old submain wiring and making good disturbed surface of walls, floors etc.complete all as specified. |
| 144 | Material and labour for submain wiring with four run of single core FRLS, PVC insulated unsheathedmultistranded copper conductor cable of size 16 Sqmm drawn through in existing PVC rigid non metallic concealed conduit including two run of earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cableof size 16 Sqmm with green insulationincluding taking down old submain wiring and making good disturbed surface of walls, floors etc.complete all as specified. |
| 145 | Supply and fixingin repairs PVC rigid non metallic concealed conduitmedium grade ISI mark 25mm dia including cutting chases making good in cement mortar 1:3 finishing, and conduit accessories such as tee, elbow ,bend junction box complete for drawing telephone cable/ TV cable/ Camera cable/ PVC copper wires all as specified |
| 146 | Supply and fixingin repairs PVC rigid non metallic concealed conduitmedium grade ISI mark 20mm dia including cutting chases making good in cement mortar 1:3 finishing, and conduit accessories such as tee, elbow ,bend junction box complete for drawing telephone cable/ TV cable/ Camera cable/ PVC copper wires all as specified |
| 147 | Supply and fixing distribution board, vertical type, double door with IP-43 IK -09 Protection suitable for MCCB TPN as incommer and MCB SP/TP as outgoing 415 volts 3 phase 50 C/s 8 way , complete with appropriate size copper bus bar and neutral linkcomplete with one MCCB FP 415 volts 160 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as specified and directed |
| 148 | Supply and fixing in repairs/replacement Sheet metal enclosure for DBs when MCBs to be used, TPN 8 ways 415 V, with suitablerated bus bar, double door, epoxy/powdercoated inside and outside complete all as specified |
| 149 | Supply and fixing in repairs/replacement Sheet metal enclosure for DBs when MCBs to be used, SPN 8 ways 240 V, with suitable rated bus bar, double door, epoxy/powder coated inside and outside complete all as specified |
| 150 | Single pole and neutral enclosure with a two pin and earth plug and socket 240 volts complete with one single pole MCB 20 Amps complete all as specified and directed. |
| 151 | Material and labour in replacement MCB SP 5 Amps to 32 Amps, 240V with rupturing capacity 10 KA, B Curve complete all as specified |
| 152 | Material and labour in replacement MCB SPN 32 Amps, 240V with rupturing capacity 10 KA, B Curvecomplete all as specified |
| 153 | Material and labour in replacement MCB TPN 63 Amps, 415V with rupturing capacity 10 KA, B Curvecomplete all as specified |
| 154 | Material and labour in replacement MCB TP 32 Amps, 415V with rupturing capacity 10 KA, B Curve complete all as specified |
| 155 | Supply and fixing in replacement energy saving LED batten with polycarbonate diffuser comprising with aluminium housing, 4 ft, 20W, 6500K, power factor more than 0.95, IP-20 class-l protection with inbuilt LED driver, lumen efficacy 110 lm/w complete all as specified and directed |
| 156 | Supply and fixing in replacement energy saving bulk head luminaire with Polycarbonate diffuser LED integral fitting 10 watt (Min), 6500K, IP-66, connecting and testing,complete all as specified and directed |
| 157 | Supply and fixing in replacement energy saving LED batten with polycarbonate diffuser comprising with aluminium housing, 2 ft, 10W, 6500K, power factor more than 0.95, IP-20 class-l protection with inbuilt LED driver, lumen efficacy 110 lm/w,complete all as specified and directed |
| 158 | Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with and including LED lamp 9W complete all as specified and directed. |
| 159 | Supply and fixing in replacement energy saving pressure di-cast aluminium luminaire with heat resistant glass and suitable optics for uniform distribution of light 25 watt LED for building security lights with high efficiently electronic driver, having IP-66 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply pre-wired and including mounting bracket of suitable size with clamps, nuts and bolts,connection and testing complete all as specified |
| 160 | Fixing only serviceable tube light fitting retrieved from srl item No. 125.00 connecting to ceiling rose and make it functional complete all as specified and directed. |
| 161 | Taking downceiling fan from site and deposit to MES store yard for refixing complete all as specified and directed. |
| 162 | Fixing only ceiling fan of any sweep or make after collecting from MES storeincluding replacement of flexible wire, rubber reel, nut, bolts with lock nut and washer and testing complete all as specified and directed. |
| 163 | Material and labour for Painting of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust, preparing of surface complete all as specified and directed |
| 164 | Taking downgeyser 25 ltr cap from site and deposit to MES store yard for refixing complete all as specified and directed. |
| 165 | Fixing only geyser 25 ltr capof any size or make after collecting from MES store including replacement of PVC connectionscompleteall as specified and directed. |
| 166 | Material and labour for Painting of geyser complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust, preparing of surface complete all as specified and directed. |
| 167 | Taking downelectric KWh metersingle phase from site and deposit to MES store yard for refixing complete all as specified and directed. |
| 168 | Fixing only electric KWh meterany type, any make, any size, including collecting from MES store and making necessary connections complete all as specified and directed. |
| 169 | Material and labour for earthing complete with & including galvanized MS earth plate of size600 x 600 x 6 mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level,with top edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire 4mm dia connected soldered and riveted, fixed properlyto earth plate by means of nuts, bolts , check nuts & washers, of galvanizediron or steel all as Shown in electrical plate No. 3 of MES SSR Part- I (2009) and connected to panel board, all as specified and testing on completion including provn of earth wire protected by 15 mm dia light grade GI pipe upto 7.5 meter from electrode to earth terminal point Feeder Pillar box including earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate, GI light grade watering pipe of 20mm dia with funnel with wire mesh including all necessary excavation& earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6type C-1 as inearth chamber, 50 mm thick RCC cover using cement concrete 1:2:4 type B-0 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified & shown on drawings and testing& directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
