Military Engineer Services-MES has published Tender For Ge/Smb/T-56/2023-24 Repair Replacement Of Ac Sheet Roof Sheet False Ceiling And Connected Br Items Of Certain Bldgs In Zone I At Mil Stn Samba. Submission Date for this Tender is 03-01-2024. Shed Construction Tenders in samba Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 27-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-01-2024 |
Sl. No. | Item Description |
1 | Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.47 to 0.50mmthick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions and including dismantling old U/S AC sheet in roof, wall etc, complete all as specified and directed. |
2 | Pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.47 to 0.50mmthick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions and including dismantling old U/S AC sheet in roof, wall etc, complete all as specified and directed. |
3 | Roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, flat, hollow sections) including distance pieces, cleats, welding/rivets/nut/bolts/washer etc, conforming to Fe-410-W (Gde-E-250) Quality-"A" ,complete all as specified and as directed. |
4 | Steel plates (plain or chequered) channels, square cut or notched ( ordinary and counter sunk) with riveted, bolted or welded attachment, complete all as specified and directed. |
5 | Dismantling timber scantlings 40 sq. cm and over in section, in any position, framed work, complete all as specified and directed. |
6 | Preparation of new or previously untreated surface ofsteel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
7 | Brick work withsub class"B" burnt old size bricks straight or curved on planexc. 6 m mean radius bult in CM 1:6 including demolition of old brick works any type and removing u/s material from the work site to outside defence land, complete all as specified and as directed. |
8 | Brick work withsub class"B" burnt old size bricks straight or curved on planexc. 6 m mean radius bult in CM 1:6 but except bricks,including demolition of old brick works any type and removing u/s material from the work site to outside defence land, complete all as specified and as directed. |
9 | PCC 1:2:4 type B-1 (using 20 mm graded stone crushed aggregate) as in coping, bed blocks, junction of parapet wall, fixing of truss etc including preparation of surface and fair without using extra cement and formwork included the quoted rate,complete all as specified and directed. |
10 | Rendering 15mm thick in CM 1:4 on fair/unfair faces of brick work or concrete surfaces finished fair & even without using extra cement , complete all as specified and as directed by Engineer-in-charge. |
11 | 15 mm thick renderingon fair faces of brick work or concrete surfaces in CM 1:6 and finished even and fair without using extra cement,, complete all as specified and as directed by Engineer-in-charge. |
12 | Rendering 15mm thick in CM 1:4 on fair/unfair faces of brick work or concrete surfaces finished fair & even without using extra cement including taking down old cement plaster on any surface include raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed by Engineer-in-charge. |
13 | 15 mm thick renderingon fair faces of brick work or concrete surfaces in CM 1:6 and finished even and fair without using extra cement, including taking down old cement plaster on any surface include raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed by Engineer-in-charge. |
14 | Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper including smoothing of plastered surface by applying wall care putty andone coat of primer complete all as specified. |
15 | Two coats of cement based paints including preparation to newly plastered surfaces of walls etc completed all as specified. |
16 | Preparation of old plastered surfaces of walls & applying two coats of oil bound distemper including smoothing of plastered surface by applying wall care putty andone coat of primer complete all as specified. |
17 | Two coats of cement based paints including preparation to old plastered surfaces of walls etc completed all as specified. |
18 | 4mm thick designer ceiling board in ceiling fixed in ceiling laid over and including hot dipped galvanised iron grid (powder coated ) with 24 mm wide T section exposed flange . The frame work shall comprise of main runner made from 0.33mm thick galvanished steel sheet of size 24x32 mm spaced at 1200mm maximum centres. Hangers of GI wire 4mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 frin adhacebt wall flush fittings of 1200 mm long screws Tee with double stiching to interlocked between main runners at 600mm centre to centre from 1200x600 mm modules cross tee longer than 600mm modules to be formed by fittings 600mm long cross tee,tee perimeter wall angle shall be of 0.45mm thick galvanised steel of size 19x19 mm of white colour all as per instructions including Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillet, complete all as specified and as directed. |
19 | Machin cut kota stone slab flooring 16-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 including demolition of old slabs or tile any type with bedding mortar and throu away out side of defence land, complete all as specified and directed by Engr-in-charge. |
20 | Machin cut kota stone slab flooring 16-18 mm thick in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding rendering 10 mm thick in CM 1:4 on brick or concrete surfaces including demolition of old slabs or tile any type with bedding mortar and throu away out side of defence land, complete all as specified and directed by Engr-in-charge. |
21 | Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail