}

Tender For Provision Of Store At Mirc Ahmednagar, ahmednagar-Maharashtra

Military Engineer Services-MES has published Tender For Provision Of Store At Mirc Ahmednagar. Submission Date for this Tender is 15-05-2024. Screws Tenders in ahmednagar Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

40950539
Corrigendum : Tender For Provision Of Store At Mirc Ahmednagar
Open Tender
Indian
Maharashtra
ahmednagar
15-05-2024

Tender Documents

Additional Details Available on Click
✓ Tendering Authority
✓ Publication Document
(Tender Document / Tender Notice )

Tender Details

Tender For Provision Of Store At Mirc Ahmednagar; 1 Sch A Part-I: Building / Structuresnote: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only 2 Construction Of Block Of Explosive Store Includingrcc Retaining Wall ( Vift ) , Toe Wall, Sand Fillingand Earth Filling And Hard Standing Complete All As Shown In Drawings And As Specified.Note : Road As Shown In Drawing Shall Be Measured And Paid Seperately. 3 Note: Schedule ‘A’ Part Iito Vii Items Have Been Prepriced By Mes And The Bidders Shall Insert Their Lumpsum Cost In Green Field Under Column-6 Only. 4 Total Amount Of Sch A Part-Ii ( Lighting Protection ) 5 Total Amount Of Sch A Part-Iii ( External Electrification ) 6 Total Amount Of Sch A Part-Iv ( Road, Path And Culvert ) 7 Total Amount Of Sch A Part-V ( Area Drainage ) 8 Total Amount Of Sch A Part-Vi ( Fencing And Gate ) 9 Total Amount Of Sch A Part-Vii ( Site Clearance, Excavation And Earthwork ) 10 Note: Schedule ‘A’ Part Iito Vii Items Which Are Notprepriced By Mes Are Given In Sch A Part-Viii, Bidders Shall Insert Their Rate In Column-6 Only And The Estimated Rate Indicated As 0.0 Are For That Purpose. 11 Schedule A Part-Viii ( Misc B / R Ande / M Works ) 12 Supply, Install And Erect In True Vertical Position Steel Tubular Swaged Welded Poles Complete With Ms Base Plate 6 Mm Thick And Of Size 450 Mm X 450Mm, Finial Taper, Plug, Pole Cap, Bolts, Nuts & Screws Etc., Pole Made Out Of Erw M.S. Tubing Conforming To Is-2713 Part-Ii Type 410 Sp- 31 ( 9.0 Metres Long ) Swan Neck Including Drilling Of Holes Of Required Numbers And Size For Fixing Of Cross Arms And Applying Two Coats Of Aluminium Paint Over A Coat Of Red Oxide Primer Over The Exposed Surface And Applyingtwo Coats Of Black Bituminous Paint Over The Embedded Portion Of Pole In Concrete, Painting Three Signal Red Colour Bands At Lower Portion Of Exposed Pole Starting From Pole Cap Each Band Of 300 Mm Height At 300 Mm Spacing, Painting Pole Number By Black Paint In Stencilled Letters / Figures Of 8 Cm Height, Complete All As Specified And Directed. Note:- Excavation And Pccfor Foundation And Coping Will Be Measured & Paid Separately Under Relevant Items Of Schedule A. 13 S&F Pvc Insulated And Overall Pvc Sheathed, Stranded Copper Conductor Wire 1.50 Sq.Mm X 3 Core Isi Marked Complete And Provided And Connected From Fittings To Pole Junction Box, Complete All As Specified And Directed. 14 S&F New Generation Energy Saving And Environmental Friendly Long Life Led Street Light Fitting 65 Watt Made Up Of Pressure Die Cast Aluminium Housing With Ip 66 Ingress Protection With High Power Led As Lighting Source And Lens Embedded Pc Cover Having Top Opening Seperate Driver Compartment And Impact Resistance Of Ik08 With 4 Kv In Built And 10 Kv External Surge Protection Device, High / Low Voltage Cut Off, Open / Short Circuit Protection And High Power Factor Including Fittings And Connecting New Street Light On Pole Bracket And Suitable Size 40Mm Dia Gi Light Grade Mounting Pipe; Complete All As Specified An Directed. 15 S&F Pole Junction Box Sheet Moulded Compound ( Smc ) Type With Hinged Door And Locking Arrangement Of Size 200 X 140 X 95 Mm ( Internal ) Comprising 10 Amp Aluminium Bus Bar, 240 Volt, Neutral Link And 01 No Mcb Single Pole Of Capacity 6 Amp 240 Volts And One Number Heavy Duty Connector Block Of Polycarbonate Body With 4 Terminals For Loop In & Loop Out Suitable For Three Phase Street Light System Including Nuts And Bolts And Connecting Up Complete With Ms Clap Fabricated From 25 X 3 Mmm Flat Iron, Nuts, Bolts And Washers Etc. Complete All As Specified And Directed. 16 Supply, Installation, Testing And Commissioning In Replacement Outdoor Cubical Feeder Pillar Box / Lt Panel Suitable For 3 Phase 4 Wire 415 Volts 50 Hz System, Suitable Size Powder Coated, Weather, Dust And Vermin Proof, Factory Fabricated, Totally Enclosed, Front Opening Door Type, Ip-54 Class Protection, Made Out Of 3.15 Mm Thick Crca Sheet Metal Outer And 2 Mm Thick For Inner Compartments Conforming To Is: 8623, Panel Shall Be Of Suitable Size For Housing Bus Bars, Lt Switchgears And Measuring Instruments, Frame Made Out Of Ms Angle Iron Frame Made Out Of 50X50x6 Mm Cut To Size, Welded, Bent To Shape, Cubical Fabricated Truly To Box Type, Hinged Panel Board Opening Handles, Locking Arrangements, Provided With Sufficient Circular Holes At The Bottom Sheet For Entry Of Plated Cable Glands And Aluminium Lugs Suitable For Incoming And Outgoing Cables, Provided With Pvc Rubber Bushes To Spare Holes, Including Internal Wiring In The Panel With Pvc Insulated Multi Stranded Copper Conductor Cable 1100 Volts Grade Is 694 Marked Or Pvc Sleeved Copper Strips Of Appropriate Sizes But Not Less Than 2.50 Sqmm, Including Provision Ofpcc Platform And Grouting Panel Legs In Pcc Block So That The Bottom Of Panel Shall Be At Minimum 45 Cm Above Ground Level And 45 Cm Embedded In Concrete, All Accessires Prewired Complete With Danger Notice Board With And Including The Following Controls And Accessories:- 17 ( A ) Aluminium Bus Bar 200 Amp Capacity For Phase-R-Y-B And 100 Amps For Neutral Mounted On Epoxy Based Insulator Installed With Coloured Sleeves - 01 Set ( 3 Phase And 1 Neutral ) 18 ( B ) Incoming - 4 Pole Mccb 63 Amp, 50 Hz, 415 Volt With Rupturing Capacity 16 Ka With Adjustable Thermal And Magnetic Settings Inclding Connection With Bus Bar - 01 No 19 ( C ) Outgoing- Mccb 32 Amps Four Pole Rupturing Capacity 16 Ka Including Connection With Busbar = 04 Nos. 20 ( D ) Multifunction Digital Square Type Inteligent Panel Meter To Measure Voltage, Current, Frequency And Power Factor = 01 No 21 ( E ) Led Phase Indicator Of Red, Yellow And Blue With Back Up Hrc Fuse = 01 Set Of 03 Lamps 22 ( F ) Automatic Street Light On / Off Timer Of Capacity 240 V Single Phase Of 16 Ammp Ratingwith Contactor Fitted Inside Steel Enclosure = 01 No 23 ( G ) Panel Wiring With Suitable Capacity Of Copper Conductor Cables Of 1100 V Grade. 24 ( H ) Pcc Foundation 1:3:6 Type C-1 Of Suitable Size As Directed By Engineer-In-Charge. 25 Notes: 26 ( I ) Panel Shall Be Manufactured By The Reputed Manufacturer Who Is Possession Of Type Test Certificate By Cpri Not Older Than Ten Years. 27 ( Ii ) Rate Quoted Shall Be Inclusive Of Complete Excavation And Earthwork In Any Kind Of Soil As Per Site Requirement.

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 03-Jan-2024 Bid Submission Start Date Corrigendum 03 Jan Date 23-01-2024
2 16-Jan-2024 Bid Submission Start Date Corrigendum 16 Jan Date 08-02-2024
3 29-Jan-2024 Bid Submission Start Date Corrigendum 29 Jan Date 27-02-2024
4 16-Feb-2024 Bid Submission Start Date Corrigendum 16 Feb Date 19-03-2024
5 11-Mar-2024 Bid Submission Start Date Corrigendum 11 Mar Date 11-04-2024
6 03-Apr-2024 Bid Submission Start Date Corrigendum 03 Apr Date 01-05-2024
7 23-Apr-2024 Bid Submission Start Date Corrigendum 23 Apr Date 15-05-2024

Key Value

Document Fees
INR 1000 /-
EMD
INR 273000.0 /-
Tender Value
INR 1.98 Crore /-

Attachment

FileName File Description File Size
f9981269-3d5d-4121-8dbe-1a0cff40f451.html Tender Notice 0 KB
BOQ_706669.xls Tender Document 0 KB
MainDrawingSet1A.rar Tender Document 0 KB
MainDrawingSet1B.rar Tender Document 0 KB
MainDrawingsSet2.rar Tender Document 0 KB
MainDrawingsSet3.rar Tender Document 0 KB
TDDrawingsT35.rar Tender Document 0 KB
Tender.pdf Tender Document 0 KB
Tendernotice_1.pdf Tender Document 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail