Tender For Construction Of New Health Sub Centre Building At Thiruvanaikoil Area In Ward No 6; 1 Earth Work Excavation For Foundation In All Kinds Of Soils And Sub Soils To Full Depth As Directed By The Departmental Officers Except Hard Rockinclusive Of Shoring Strutting And Balling Out Water Wherever Necessary And Refilling The Sides Of Foundation With Excavated Earth In Layers Of 15Cm Thick Well Rammed And Consolidated And Depositing The Surplus Earth With In The Compound In Places Shown By The Departmental Officers With Initial Lead Of 10 Meters And Initial Lift Of 2 Meters Including Cost Of All Labour Charges Etc., Complete As Per Standard Specification 23 & 24Vi ( S2 ) Vii.9, 10 ( Open Earth Work ) 2 Earth Work Excavation For Foundation In All Kinds Of Soils And Sub Soils To Full Depth As Directed By The Departmental Officers Except Hard Rockinclusive Of Shoring Strutting And Balling Out Water Wherever Necessary And Refilling The Sides Of Foundation With Excavated Earth In Layers Of 15Cm Thick Well Rammed And Consolidated And Depositing The Surplus Earth With In The Compound In Places Shown By The Departmental Officers With Initial Lead Of 10 Meters And Initial Lift Of 2 Meters Including Cost Of All Labour Charges Etc., Complete As Per Standard Specification 23 & 24Vi ( S2 ) Vii.9, 10 ( Narrow Earth Work ) 3 Supplying And Filling In Foundation Andbasement With Filling Sand In Layers Of Not More Than 15Cm.Thick Well Rammed Watered And Compacted Etc., Complete Complying With Standard Specification. 4 Plain Cement Concrete 1:5:10Using 40Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Charges And All Incidential Charges Such As Water Providing Etc., Complete As Per Standard Specification ( The Crushed Stone Sand To Be Used On Cocrete Work Shell Conform To Gradation As Per Is :383-1970 ) 5 Brick Work In Cm 1:5 ( One Cement & Five Parts Of Crushed Stone M-Sand ) Using Ii Class Ground Moulded Bricks Of Size 9X43 / 8X 2 3 / 4 Including Finishing, Curing, Etc., Complete Complying With Standard Specification - 100Cft 6 Foundation 7 Ground Floor 8 Supplyingand Erectingsteel Centeringincludingnecessary Supports For Plane Surfaces For Reinforcedcement Concrete Works Such As Column Footings, Column Pedestals, Plinthbeams, Grade Beams, Staircase Steps, Etc. Which Require Only Nominalstruttingusingmild Steel Sheets Of Size 90Cm X 60Cm And 10 Bg Stiffened With Welded Mild Steel Angles Of Size 25Mm X 25Mm X 3 Mm For Boarding, Laid Over Silver Oakjoists Of Size 10Cm X 6.5Cm Spaced At About 75Cm Centretocentreoratsuitableintervalsetc.Completeinallfloorscomplyingwith Standard Specification. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) . 9 Without Strutting 10 Column& Sunshade 11 With Strutting 12 Reinforced Cement Concrete 1:1:5:3 Mix Using 20Mm Iss Gauge Hbbg Metal Including Curing Cost Of Materials And All Labour Charges And Curing Etc., Complete. 13 Foundation 14 Ground Floor 15 Suppling And Fabricating And Placing In Position Ms ( Or ) R.T.S. Bar For Reinforcement To All Rcc Works As Per The Design Given Including Cost Ofsteel And Binding Wire Also In All Floors. 16 Plain Cement Concrete 1:2:4 ( One Cement, Two Sand And Four Aggregates ) Mix Using 20Mm Iss Gauge Hbbg Metal Including Curing Cost Of Materials And All Labour Charges And Curing Etc., Complete. 17 Reinforced Cement Concrete 1:2:4 ( One Cement, Two Sand And Four Graded Stone Aggregates ) Mix Using 20Mm Issgauge Hbbg Chips For Jally 50Mm Thick Metal Excluding Cost Of Reinforcement Grills In Position But Including Moulding And Laying Concrete In Position Curing And Finishing Etc., Complete 18 Plastering With Cement Mortar ( 1:5 ) Mix ( One Cement & Five P-Sand ) 12Mm , Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications. 19 Plastering With Cement Mortar 1:3, Mix ( One Cement & Three P-Sand ) 10 Mm , Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications. 20 Weathering Course With Concrete Broken Brick Jelly 20Mm Gauge In Pure Slaked Lime ( No Sand To Be Added ) Over Roof Slab, The Proportion Of Brick Jelly To Lime Being 32 To 12.5 Well Beated With Wooden Beaters For Giving Required Slope And Thickness As Directed By The Departmental Officers Etc., Complete.-10 Cum 21 Finishing The Top Of Roof With One Course Of Machine Pressed Tiles Of Size 200 Mm X 200 Mm X 20 Mm Of Approved Quality In Cement Mortar 1:3 ( One Cement & Three P-Sand ) 12 Mm Thick Mixed With Water Proofing Compound Conforming To Iss At 2% By Weight Of Cement Used And The Joints Pointed Neatly To Full Depth Of Tiles With The Same Cement Mortar Mixed With Red Oxide And Water Proofing Compound Including Curing Etc., Complete ( The Crushed Stone Sand To Be Used In Base Mortar Shell Confom To Gradation As Per Is 1542-1977 ) 22 Paving The Floor With Vitrified Marbonite Tiles Of Approved Quality And Colour Of Size 600X600x8mm Thick Of Approved Make, Quality And Colour In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Cement & Three P-Sand ) 20Mm Thick And Laid Straight Alignment And Pointed Neatly With Colour Cement At The Rate Of 0.40Kg / M2 Laid Without Any Air Gap In The Tiles Neatly And Fixing In Position As Per Standard Specifications And As Directed By The Departmental Officer.The Colour & Quality Of Tiles Should Be Got Approved By Municipal Engineer Before Use On Work 23 Supplying And Laying In Flooring With Fully Polished Synthetic Jet Black Colour Granite Stone Of 20Mm Thick Of 4 X 2 In Size Laid Over Base Layer Of Cement Mortor 1:3 20Mm Thick And Applying Cement Slurry& Pointed With White Cement And Colour Pigment To The Colour Of Stones And Polished Neatly As Per Directed By The Deparmental Officers 24 Paving The Floor With Design Anti Skirt Ceramic Tiles ( Colour And Shade As Directed ) Of Size 305 Mm X 305Mm X 6 Mm In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Cement & Three P-Sand ) Thick Laid In-Situ And Pointed With Same Coloured Cement Mixed With Colouring Pigments ( The Crushed Stone P-Sand To Be Used In Base Mortar Shell Confom To Gradation As Per Is 1542-1977 ) 25 Supplying And Fixing In Position Indian Water Closet Of Size 580 X 440Mm, White Glazed Earthen Ware Of Approved Quality With P Trap Or S Trap Confirming To Is:2556 -Part Xii With Sand Cushion And Forming Flooring Alround The Closet Using 40Mm Broken Brick Jelly In Lime Concrete1:2:5 ( One Part Of Lime, Two Parts Of M- Sand And Five Parts Of Brick Jelly ) 100Mm Thick And Finishing The Top To Required Slope And Including Giving Necessary Connection To Cast Iron Soil Pipes / Pvc Pipes By Dismandling Brick Masonry, Reinforced Cement Concrete Roof / Floor Slab And Making Good The Disturbed Portion To Original Condition Without Leakage Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. 26 Supplying And Fixing In Position White Glazed European Water Closet Of Best Quality And Approved Make With 100Mm P Os S Trap With Double Flapped Rigit P.V.C. Seat Cover With C.P. Brass Hinges With 12.5 Litres Pvc Low Level Flushing Tank With All Internal Fittings Etc., Complete Complying With Standard Spoecifications, Labor Inclusive Of Fixing Lowlevel Flushing Tank. 27 Dadooing Walls With Ceramic Tiles Of Sizes 300Mm X 450Mm X 8Mm Size Of Approved Make And Quality And Colour Set In Cement Mortar 1:2 ( One Part Of Cement And Two Part Of Plastering Sand ( P- Sand ) ) Over 10 Mm Base Layer Plastering And Pointing With White Cement Neatly As Directed. 28 Supplying And Fixing In Position Best Quality Approved Make White Glazed Earthenware Wash Hand Basin Of Size 550 X 400 Mm With A Pair Of Cast Iron Brackets, Including Cost Of 15Mm Diametre Brass Chromium Plated Piller Tape, 32 Mm Diametre C.P. Waste Union, 32 Mm Diametre P.V.C. Waste Pipe With Rubber Plug And Chain, 15Mm Diametre G.M.Wheel Valve, 15Mm Dia Brass Nipple, 15Mm Dia Nylon Connections Etc., Including Fixing The Wash Hand Basin In The Wall In Position With A Pair Of C.I. Brackets With Teak Wood Plugs And Screws And Giving Necessary Water Supply Connection And Paintiung The Brackets With Two Coats Of Paint Over A Primimg Coat Of Anticorrosive Paint Including Testing For Leackage Etc., Complete Complying With Standard Specifications 29 Stainless Steel ( Salem Stainless Steel ) Door Frame ( Box Section Using Stainless Steel Plate Of 1.6Mm Thick ) Of Size 100Mm X 60Mm With A Rebate Of 30 / 35Mm X 15Mm On One Side Of The Frame Including Supplying And Fixing Dovetail Splayed End Stainless Steel Hold Fast Etc., ( Pwd 23-24 P.No:49 ) 30 Supply And Fixing Of Solid Pvc Door Shutters With Frameusing 19 Guage 19Mm Ms Square Tubes For Styles And Outer Frame 15Mm Ms Square Tubes For Top Lock Bottom Rails. The Steel Square Tubes For Top, Lock And Bottom Rails. The Steel Tubes Shall Be Covered With 5Mm Thick Solid Pvc Sheets. Shutterrs Using 5Mm Thicksolid Pvc Sheets For Panelling Shall Rigidly Fixed In Position Including Necessary Furniture And Fittings. The Overall Size Of Styles Shall Be 50Mm X 30Mm. The Overall Size Of Top Rail, Lock Rail And Bootom Rail Shall Be 75Mm X 30Mm. The Ovrall Size Of Frames Shall Be 50Mm X 45Mm With Suitable Rebate For Housing The Shutters. Etc., Complete Complying With Standard Specification 31 Supplying & Fixingdoor Shutters For Solid Core Flush Shutters With Teak Ply On Both Side With Teak Wood Lipping Alround 35Mm Thick, Single Leaf Confirming To Is:12406 / 1989 With 35X12mm T.W. Lipping On All Edges With Necessary Adhesives And Cp Screws Complying With Standard Specifications. The Rate Is Inclusive Ofthreee Coats Of Best Quality Varnish But Excluding Cost Of Furniture Fittings, Such As 300 Mm Tower Bolt 2Nos, 200Mm Towerbolt 1 No. 300Mm Aldrop 1 No. Alu Handle Ornamental Type 2 Nos And 1No.Door Stopper Etc Complete. 32 Fabricating, Supplying And Fixng In Position Of Steel Glazed Window ( Two Leaves ) With The Following Specifications. Outer Frames Of Windows Made Of Z Section F7d Of Size 33 X 25 X 3Mm At 1.419 Kg / M And Mullion J Section ( F4b ) Of Size 46X25x3mm At 2.28Kg / M And Shutter Section Of Made Off7d Of 33X25x3mm At 1.419 Kg / M As Specified In Is 7452 / 1990. Each Openable Shutter Should Not Exceed A Width Of 600Mm To Enable Separate Operations And Easy Maintenance. The Panel Of The Shutters To Be Covered With 3Mm Thick Pin Headed Glass And Fixed With 15X12mm Teakwood Beading Of Superior Quality And Fixed With Shutter Frames.2 Numbers Of Sturdy Hinges And One Number Of Handle To Be Fixed To Each Shutterat An Appropriate Height In Window. Suitable Opening Is Left For Its Easy Operation. A Stopper Square Rod For Handle Is Provided In The Mullion Section At Suitable Place To Catch The Window Handle. Each Window Shutter Having An Adustable Stay Made Out Of 18 X 5Mm At 0.70 Kg / M Ms Flat Of Lenght 320Mm With Three Adjustable Position. A Matching Peg Is Provided In The Outer Frame Of The Window At Suitable Place. 4 Nos. Of Hold Fasts Of 120Mm Length Spliced At The Ends Are Welded To The Outer Frame Of The Window.An Ms Square Bar Of 12Mm Size Is Welded To The Inner Face Of The Windowat An Equalinterval Not Exceeding 100Mm Edge Between Them. All Members Are Painted With One Coat Of Anti-Corrosive Red Oxide Primer As Directed By The Departmental Officers.All Sections Should Be In Confirmed With Is 7452 / 1990.The Cost Includes Cost Of All Materials, Labour Charges And Other Incidental Charges, Etc., Complete 33 Construction Of Inspection Chamber Of Size 1 1 / 2 X 1 1 / 2 As Per Tp No 18 / 1944 Of The Description Of The Chamebr To Be Cement Concrete 1:5:10 Mix Using 40Mm Metal Brick Work In Cement Mortar 1:5Mix Using Country Bricka And Plastering With Cement Mortar 1:4Mix 12Mm Thick As Per Standard Specification 34 Supplying And Fixing 110Mm Dia Pvc Rain Water Down Fall Pipe Including Cost Of 110Mm Dia Pvc Pipe, Bend, Tee, Brackets And Teak Wood Plugs Etc., Complete 35 Conducting Geophysical Survey, Quality And Quantity Test And Transportation Charges Etc, ( This Includes Labour Charges In The Field, Rent Of The Vehicle For Reaching The Place, Rent Of The Instrument And Excluding Charges For The Geologist ) 36 Drilling Of 150Mm Dia Vertical Bores In Hard Rock Formation To Any Required Depth As Directed By The Departmental Officers Including Labour Charges For Inserting Casing Pipe, Assembling In The Drilled Hole, Including Welding The Joints If Necessary Grouting The Casing Pipe Etc, And Including Transportation Charges For The Rig And Supporting Vehicles From One Place To Another Place. 37 Supply And Delivery Of Single Phase 1.00 Hp Clear Water Vertical Wet Type Submersible Pump Conforming To Is 8034 / 2002 And As Amended Threafter And Bee 3 Star Rated Capable Of Discharging Notes 20 Lpm X 100 M Against Head Of Water Column Due To All Causes. The Pump Shall Be With Stainless Steel Shaft And Dyamically Balaced Bronze Or Cast Ss Impeller, Brass Screws And Ci Fg 200 Grade Two Pole Suitable Wet Type Vertical Squirrel Cage Induction Motor Suitable For Operation In Ac Single Phase 230 V+- 10 %, 50 Hz + / - 5 %. 38 Supply And Laying Of Pvc Casing Pipes Of 150 Mm Od Pvc Casing Pipes Assemblyassembly ( With Slots Or Without Slots ) In The Drilled Hole Including The Jointing The Pipes With Pvc Couplers With Cement Paste Etc. Complete 39 Labour Charges For The Erection Of Submersible Pump Set In Bore Well / Open Well Including Fixing And Jointing Submersible Cable With Proper Clamps Up To The Starter To Required Depth And Also Fixing Of Riser Pipes To The Required Depth Valves Erection Clamps, Pressure Gauges Up To The Exterior Wall Of Pump Room And Erection Of Panel Board Consisting Of Tpicn Switches Starter, Voltmeter, Ammeter, Three Pilot ( Indicating ) Lamps Capacitor Single Phasing Preventer, Water Level Guard And Laying And Jointing The Cables And Twin Earthing As Per Ie Rules Etc., Complete And Testing The Pump Set And Trail Run For 10 Days. 40 Supply And Delivery Of Single Phase Panel Board - Star Delta With Two Level Guard And Auto Start Suitable For Submersible Pumpsets And Accessories Including All Fittings Suitable For Submersible Pump Sets.Panel Board Should Be Provided As Per Specification. Rates Inclusive Of Packing, Loading, Freight, Unloading, Stacking, Transit Andinsurance Charges Etc, Complete. 41 Supplying And Fixing Of Pvc Insulated And Sheathed 3 Core 1.5Sq.Mm Flat Type Copper Cable Cofirming To Is 694 / 1990 And Including Cost And Conveyance Of All Materials To Site And Labour Charges Etc, Complete As Per Standard Specification. 42 Supplyingand Fixing Of Bore Well Fittings As Per Standard Specification As Directed By The Departmentaol Officers Etc., Complete 43 32 Mm Dia Upvc -Pipe Bore Inner & Inlet To Tank 44 25 Mm Dia Upvc Pipe-Outlet 45 20 Mm Dia Upvc Pipe 46 32 Mm Dia Upvc Elbow 47 25 Mm Dia Upvc Elbow 48 20 Mm Dia Upvc Elbow 49 32Mm Dia Upvc Nipple 50 32 Mm Dia Upvc Coupling 51 25 Mm Dia Upvc Coupling 52 20 Mm Dia Upvc Coupling 53 32 X 25 Mm Dia Upvc Reducer 54 25 X 20 Mm Dia Upvc Reducer 55 32Mm Gate Valve 56 20Mm Lp Sd Tap 57 Supply Of Following Pvc Pipes With Specials Etc., Complete. 58 160Mm Pvc Pipe 6 Kg / Cm² 59 110Mm Pvc Pipe 6 Kg / Cm² 60 160Mm Borewell Pvc Endcup 61 110Mm Pvc Vent Cowl 62 Conveyance Of Rigid Pvc Pipes And Specials To Trench Within A Lead Of 200M And Lowering Into Trench And Laying To Proper Grade And Alignment Jointing With Pvc Couplers With Cement Paste And Testing To The Required Pressure Including The Conveyance Of Water For Filling During Testing Within 1Km Lead Exculding Cost Of Materials For Works Upto 2 Meters Depth Including Cost Of All Materials Etc., Complete 63 160Mm Pvc Pipe 6 Kg / Cm² 64 110Mm Pvc Pipe 6 Kg / Cm² 65 Supply And Delivery And Fixing Of Pvc Tank At Site Including Loading, Unloading, Transportation And Labour Charges Etc., Complete. 66 Painting Two Coats With Ready Mixed Plastic Emulsion Paint Approved Quality And Colour Over A Priming Coat, Including Thorough Scrapping, Clean Removal Of Dirt, Etc Complete And Including Necessary Plaster Of Paris, Putty, Wherever Required Etc, Complete As Per Standard Specification. - 10 Sq.M 67 Supplying And Painting The Walls With Two Coats Of Oil Bound Distemper Over One Coat Of Water Based Cement Primer Including Cost For Distemper, Primer, Cleaning And Scrapping The Walls, Rendering The Wallssmooth With Necessary Putty, Brushes, Scaffolding Arrangements, Labour Charges, Etc., As Per Standard Specification. ( The Colour And Shade Of The Distemper Shall Be Got Approved By The Executive Engineer Before Use Of Work ) . 68 Paintingwith Ready Mixed Enamel Paint Over The New Wood Works Of Approved Quality And Colour Without Priming Coatincluding The Cost All Materials Etc., Complete, In All Floors. 69 Reinforced Cement Concrete 1:2:4 Mis Using 20Mm Iss Gauge Hbbg Metal For Precast Slab Of The Following Thickness Excluding Cost Of Reinforcement Grills In Position But Including Moulding Costing Curing And Fixing Etc., Complete ( 50Mm Thick ) 70 Manufacturing, Supplying And Fixing Of Stainless Steel Hand Rails For Staircase Using 50Mm Dia 304L Grade Stainless Steel Pipe Of 1.60Mm Thick At Required Locations To A Height Of 900Mm From Finished Floor Level Welded To 38Mm Dia Stainless Steel Pipe Post Of 1.00Mm Thick As Vertical At 900Mm Centre With 2 Nos. Of 25Mm Dia Intermediate Horizontal Stainless Steel Pipe Of 1.60Mm Thick In Between. The Vertical Pipe Has To Be Welded To The 100 X 100 X 6Mm Ms Base Plate Encased In The Base Concrete. The Rate Is Inclusive Of The Charges For Cutting, Bending, Welding, Grinding, Polishing, Conveyance, Electrical Charges, Etc.Complete. 71 Supplying, Fabricating, Erecting Structural Steel Work For Roofing Welded Or Bolted Type Using Ms Channels, Angles, Plates And Round Bars Etc. Conforming To Is Specification Including Primer Coating And Enamal Painting As Per Design Given By The Departmental Officers Etc, Complete As Per Standard Specification 72 Fabricating Supplying And Fixing Of Pre Painted Galvanized Iron Sheets With The Following Specification. The Materials Should Be Of Ppgi Tile Profile With A Red Colour Or Any Other Approved Design 0.47 Mm Thick 24 Guage Having Width 1050 Mm. The Sheet Should Be G.I.Base Pre Painted Hot Dipped Galvanized Iron Sheet And To Be Fixed With Shelf Tapping Screws, Plastic Washer.The Washer And Screws To Be Fixed By Using Minute Power Machine Drilled With Out Damaging The Sheets Paint Coating To Be Regular Modified Polyster Coat With Zinc Coating Of Z 120 Gsm Paint Thickness The Finish Should Be Terra Cotta Finish Like Malabar Mangalore Tiles Finish Optional Matt Finish. The Sheet To Be Fixed With Making Suitable Corrugated, Cutting The Sheet In To The Required Ssize And Making Ornamental Designs As Per The Site Condition And As Directed By The Departmental Officers. 73 Wiring With 2 X 1.5 Sqmm ( 22 / 0.3 ) Pvc Insulatedunshealhed Sc.Cu.Conductor Of1100v Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessorieswith Tw Switch Box With 5A F.T. Switch Inflush With Wall, Coveredwith Hylum Sheet Of 3Mm Thick With Painting Of Suitable Colour For Open Pvclight / Fan Point ( For Electronic Regulator ) ( 5 Pointsper Coil ) . Sd 22 74 Wiring With 2X4 Sqmm ( 56 / 0.3 ) Pvc Insulated Sc Unsheathed Cu.Conductor Cable Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With 150Mm X100mm X113mm Tw Switch Box In Flush With Wall With 3Mm Thick Hylem Sheet Cover For 15 A 3 Pin Flush Type Non Inter Locking Wall Socket With 15A Flush Type Switch With Painting Of Suitable Colour With Continuous Earth Wire Connection Of 14 Swg Tc Wire For Open Pvc Power Plug Point. Sd 41 75 Wiring With 2 X 4 Sq.Mm. ( 56 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Cable Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessories In Flush With Wall With 150Mm X 100Mm X 113Mm Tw Switch Box With 3Mm Thick Hylem Sheet For 15A 3 Pin Non Inter Locking Wall Socket With 15A Flush Type Switch With Continuous Earth Wire Connection Of 14 Swg Tc Wire And Making Good Of The Concealed Portion With Suitable Colour For Concealed Power Plug Point Sd 40 76 Supply And Fixing Of 1200Mm ( 48 ) Sweep Ac Ceiling Fan Complete With Stepped Electronic 300W Regulator With 1 Metre Down Rod With Fan Clamp With Side Plates And Cross Arm Of Size 450Mm ( 18 ) Sd 106 77 Supply And Fixing Of 300Mm ( 12 ) Sweep ( Light Duty ) Ac Exhaust Fan Complete With Necessary Wall Opening And Making Good Of The Wall Sd 114 78 Supply And Fixing Of 20W 4 Feet Led Fitting With Led Complete With T.W. Blocks On Wall Or Ceiling With Tube With Pvc Unsheathed Copper Leads From Terminals To The Fitting ( Pwd 23-24, P:121 ) 79 Supply And Fixng Of Tneb Meter Board Suitable For 3 Phase 63A Service Connection Made Up Of Suitable Angle Iron Frame Work Of Size 2 Feet X 1-1 / 2 Feet Using Angle Iron Of Size 1-1 / 2 X 1-1 / 2 X 1 / 4 Rigidly Fixed On Wall Covered With Hylem Sheet Of Size 2 Feet X 1 / 2 Feet Of 6Mm Thickness With Necessary Bolts And Nuts Supports And Supply And Fixing Of 3 Nos. 63A Fuse Units ( 500V ) , 1 No. Neutral Link, Copper Earth Flat Of Size 1 X 1 / 4 With Inter Connection Of Eb Meter To Fuse Units By 16 Sq.Mm Pvc Insulated Copper Wire With Earth Connection Complete Sd 129 80 Supply And Run Of 2 Of 6 Sq.Mm. ( 84 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V On 7 / 20 Gi Bearer Wire For Service Connection Mains Sd 66 81 Supplying And Fixing In Position Indian Make Bewelled Edge Mirror Of Approved Quality And Brand Pvc / Fibre Glass Framed Of Size 600Mmx450mmx5.5Mm With Necessary Plastic Back Pvc Frame With Bottom Stand Of Approved Colour With Brass Screws, Rawal Plugs Etc., Complete.As Per Std., Specifications. 82 Supplying And Fixing Best Approved Quality Aluminium Anodised Towel Rail 600Mm Long And 20Mm Dia Etc., Complete. 83 Supply And Fixing Of Best Approved Quality Brass Cp Soap Tray Of Size 150 X 150Mm Etc., Complete. 84 Supply And Fixing Of Vinyle Name Board Of Required Size With Corportion Emblem And Lettering As Tcc Sri Zone Toilet At In Tamil As Directed By The Depart., Officers Etc., Complete.
