Bharat Sanchar Nigam Limited-BSNL has published Tender For Renovation Of The Vacated Ac Plant Room 1 Inside Nib For Making Provision Of Sitting Arrangements For The Staffs Of Cntx East At 2Nd Floor Of Telephone Bhawan Kolkata. Submission Date for this Tender is 11-12-2023. Building Work Tenders in Kolkata West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 2 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 3 | 300x10 mm |
| 4 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 5 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 6 | Supplying, laying 2.00 mm thick PVC sheet in flooring on a smooth and damp proof base using rubber based adhesives of approved quality and manufacturer like Dunlop S-738, Fevicol SR 998 or equivalent including rolling with light wooden roller weighing about 5 Kg. all complete as directed by the Engineer-in-charge in approved colour and shade. |
| 7 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. |
| 8 | New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 10 | Two or more coats on new work. |
| 11 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 12 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. |
| 13 | Labour for taking out existing PVC flooring/Carpet from the floor / skirting including removal of adhesive by any means and making good the damages etc all complete including disposal of unserviceable surplus materials and stacking of servicable materials within any lead and lift as per direction of Engineer-in -charge. |
| 14 | Labour charge for dismantling 04 seater composite modular office table and reassembling it in new position with necessary fittings as per direction of Engineer in charge. |
| 15 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 16 | a)For fixed portion i Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 17 | b)For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). i)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 18 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 19 | Pre-laminated particle board with decorative lamination on both sides. |
| 20 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 21 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 22 | Taking out aluminium door/window, dismantling glass panes, prelaminited particle board and aluminium members, reassembling the members in proper alignment with new rubber gasket,screws wherever required and hanging the door/window as per direction of Engineer-in-charge. |
| 23 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 24 | With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
