Tender For Annual Maintenance Of Hsvp Building In Sector 15, Panchkula ( Repair And White Washing, Sanitary Items At Staff Qtr No. 610, 609-A, 609-B In Sector-6, Panchkula And All Other Works Contingent Thereto With Defect Liability Period One Year Mtc. F, panchkula-Haryana

Annual Maintenance Of Hsvp Building In Sector 15, Panchkula ( Repair And White Washing, Sanitary Items At Staff Qtr No. 610, 609-A, 609-B In Sector-6, Panchkula And All Other Works Contingent Thereto With Defect Liability Period One Year Mtc. Free Of Cost ) .- 1 30.21:- Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 2 11.58:-Providing And Applying Two Coats White Cement Based Putty Of Approved Brand Andmanufacturer, Over Plastered Surface And Grinding The Surface Smooth With Sand Paper To Get En Even And Smooth Finish Including Cost And Carriage Of All Material , Labour Charges, Scaffolding, Sundries Etc. Complete 3 30.27.1:- Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade: 1 One Or More Coats On Old Work 4 30.37.2:- Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : Old Work ( One Or More Coat Applied @ 0.90 Litre / 10 Sqm ) . 5 30.28.1:- Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : 1 One Or More Coats On Old Work 6 12.36.1:- Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters. 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws 7 12.25.1.1:- Providing And Fixing 25 Mm Thick Shutters For Cup Board Etc. Panelled Or Panelled & Glazed Shutters : Second Class Teak Wood Including Isi Marked Anodised Aluminium Butt Hinges With Necessary Screws 8 22.105.1:- Providing And Fixing C.P. Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 810 Gms.15 Mm Nominal Bore

INR 250 /-

INR 3260.0 /-

INR 1.63 Lakhs /-

Name of Work: A/Mtc. of HSVP Building in Sector 15, Panchkula ( Repair and white washing, Sanitary Items at Staff Qtr no. 610, 609-A, 609-B in Sector-6, Panchkula and all other works contingent thereto with defect liability period one year mtc. free of cost).

Sl. No.	Item Description
1	30.21:- Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
2	11.58:-Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete
3	30.27.1:- Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 1 One or more coats on old work
4	30.37.2:- Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 litre/10 sqm).
5	30.28.1:- Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 1 One or more coats on old work
6	12.36.1:- Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
7	12.25.1.1:- Providing and fixing 25 mm thick shutters for cup board etc. Panelled or panelled & glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws
8	22.105.1:- Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore