Tender For Construction Of Metal Quenching Lab In Automobile Workshop; 1 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. 2 In Cement Mortar 3 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In- Charge. 4 Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of: 5 Asbestos Cement Sheet 6 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. 7 For Thickness Of Tiles 10 Mm To 25 Mm 8 Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 9 Dismantling C.I. Or Asbestos Rain Water Pipe With Fittings And Clamps Including Stacking The Material Within 50 Metres Lead : 10 100 Mm Dia Pipe 11 Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : 12 Of Area 3 Sq. Metres And Below 13 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 14 Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 15 12 Mm Cement Plaster Of Mix : 16 1:6 ( 1 Cement: 6 Fine Sand ) 17 Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attachedpilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bedblocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing : 18 1:1½:3 ( 1 Cement : 1½ Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) . 19 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. 20 Cold Twisted Bars 21 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For 22 Suspended Floors, Roofs, Landings, Balconies And Access Platform 23 12 Mm Cement Plaster Of Mix : 24 1:4 ( 1 Cement: 4 Coarse Sand ) 25 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. 26 Fixed To Openings / Wooden Frames With Rawl Plugs Screws Etc. 27 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fastenersto Be Paid For Separately ) : 28 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) 29 Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 30 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : 31 With Float Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10Kg / Sqm ) 32 Providing And Fixing Up To Floor Five Level Precast Cement Concrete String Or Lacing Courses, Copings, Bed Plates, Anchor Blocks, Plain Window Sills, Shelves, Louvers, Steps, Stair Cases, Etc., Including Hoisting And Setting In Position With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) , Cost Of Required Centering Complete. 33 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20Mm Nominal Size Derived From Natural Sources ) 34 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm Ptmt Pillar Cock, 32 Mm Ptmt Waste Coupling Ofstandard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required. White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm Ptmt Pillar Cock. 35 Providing And Fixing Brass Bib Cock Of Approved Quality : 36 15 Mm Nominal Bore 37 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqmincluding Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 38 Size Of Tile 600X600 Mm 39 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, ( I ) Single Socketed Pipes. 40 75 Mm Diameter 41 110 Mm Diameter 42 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately ) . 43 Second Class Teak Wood 44 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters. 45 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws 46 10 Cm Thick ( Average ) Mud Phaska Of Damped Brick Earth On Roofs Laid To Slope Consolidated And Plastered With 25 Mm Thick Mud Mortar Mixed With Bhusa @ 35 Kg Per Cum Of Earth And Gobri Leaping With Mix 1:1 ( 1 Clay : 1 Cow Dung ) And Covered With Flat Tile Bricks, Grouted With Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement And Finished Neat: 47 With Common Burnt Clay F.P.S. ( Non Modular ) Brick Tile Of Class Designation 10 48 Providing And Laying Pressed Clay Tiles ( As Per Approved Pattern 20 Mm Nominal Thickness Of Approved Size ) On Roofs Jointed With Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Mixed With 2% Integral Water Proofing Compound, Laid Over A Bed Of 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) And Finished Neat Complete. 49 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings / Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion. 50 Bend 87.5° 51 110 Mm Bend 52 Shoe ( Plain ) 53 110 Mm Shoe 54 Distempering With 1St Quality Acrylic Distemper ( Ready Mixed ) Having Voc Content Less Than 50 Gms / Litre, Of Approved Manufacturer, Of Required Shade And Colour Complete, As Per ManufacturerS Specification. 55 Two Or More Coats On New Work 56 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : 57 Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture 58 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : 59 New Work ( Two Or More Coats ) Over And Including Water Thinnable Priming Coat With Cement Primer 60 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 61 New Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) 62 Providing And Fixing 3 Layer Pp-R ( Poly Propylene Random Copolymer ) Pipes Confirming To Is:15801 Uv Stabilized & Anti - Microbial Fusion Welded, Having Thermal Stability For Hot & Cold Water Supply, Including All Pp - R Plain & Brass Threaded Polypropylene Random Fittings, Including Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. External Work 63 Pn - 16 Pipe, 25 Mm Od ( Sdr-7.4 ) 64 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 65 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. 66 Hot Finished Welded Type Tubes 67 Nehani Trap
