Military Engineer Services-MES has published Tender For Repair To Flooring, Plastering, Joinery, Roofing, Plumbing And Sanitary Fittings In Certain Bldgs At Upper And Lower Camp At Khundru Grn Under Ge 861 Ews.. Submission Date for this Tender is 28-12-2023. Shed Construction Tenders in Anantnag Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Dec-2023 | Amendment | Other | 21-12-2023 |
| 2 | 21-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-12-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and directed. |
| 2 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar, complete all as spcified and directed. |
| 3 | Dismantlingplain or corrugated steel sheeting , any gauge and thickness,including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 4 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as spcified and directed. |
| 5 | Demolition of cement concrete (unreinforced) in ground floors & paving n.exc15 cm thick (below or above ground level) complete all as specified and directed. |
| 6 | Taking down chowkats or frame with shutters (without taking off shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed. |
| 7 | Taking down Chowkhats or frames n. exc 1.5 Sqmeach with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 8 | Taking down of shutter any description area exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and directed. |
| 9 | Demolition of brick work or stone boulder masonry built in cement mortar including all arches quoins etc but excluding ashlar facing, dressed stone work & precast concrete articles etc complete all as specificed and directed. |
| 10 | Dismantling wall and ceiling boards (fibre, Pulp, insulation etc) or insulation board/slabs/blankets, any thickness, including cover fillets & snap grid frame etc, complete all as specified and directed. |
| 11 | Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed. |
| 12 | Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed. |
| 13 | Dismantling timber scantling unframed 40 sq cm and over in section in any position, complete all as specified and directed. |
| 14 | Dismantling of unframed timber scantlings under 40 Sqcmin section in any position complete all as specified and directed. |
| 15 | Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 16 | Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm but n.exc. 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed. |
| 17 | Non-skidcoloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed. |
| 18 | Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 to receive tiles complete all as spcified and directed. |
| 19 | Non-skidcoloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed. |
| 20 | Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm, as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 to receive tiles complete all as spcified and directed. |
| 21 | Glazed coloured ceramic tiles in vertical surface 300x450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchover and including 10mm thick renderingin cement mortar 1:4 to receive tiles,complete all as specified and directed. |
| 22 | Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 23 | Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed and including 10mm thick renderingin cement mortar 1:4 to receive, complete all as specified and directed. |
| 24 | 18-20mm thick udaipur green marble stone (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shadecomplete all as specified and directed. |
| 25 | 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap with zinc coating of 275, fixed with "L" or "J" type or cranked hook bolts in roofs, walls etc. upto a height of 10-12m, complete all as specified and directed. |
| 26 | All as per the description of item No. 25 here-in- before but except sheets. |
| 27 | 0.80mm thickplain galvanized mild steel sheeting in ridges, hips valley gutters, drip and straight flashings (length and girth as fixed)with grade of zinc coating 275 upto a height of 10-12m, complete all as specified and directed. |
| 28 | 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. NOTE: Work to be carried upto 10m height. |
| 29 | Plain cement concrete1:3:6, type C-2, using 40mm graded mechanically crushed stone aggregate, 50mmthick, as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified and directed. Note:- The unit rate include for use of form work (straight or curved). |
| 30 | Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed with grey cement and pigment and pointed in neat cement slurry in floors, laid in floors, over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 31 | 60mm thick factory made machine pressed precast concrete coloured interlocking paver blockwith grey cement and pigment, any shape,size and design as approved by Engr-in charge confirming to IS 15658-2006, M-35 grade, complete all as specified and directed. |
| 32 | Sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed. |
| 33 | 75mm thick PCC 1:4:8 type D-2 (40 mm graded stone aggregate) as in sub-floor, sub-base, floor and pavings, etc., complete all as specified and directed. |
| 34 | PCC 1:2:4, type B-1 using 20mm graded stone agregete as in kerbs/ mud stops, sides of concrete rounded or chamfered on edges of interlocking tiles including necessary formwork, complete all as specified and directed. |
| 35 | 2nd class softwood, plain, solid, straight chowkats and frames, wrought, framed, wrought, framed rebated on the solid, rounded of chamfered, put together with glue pinned complete all as specified and directed. |
| 36 | 35 mm thick, 2nd class soft wood factory made, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 37 | S & F glazed and skelton shutters, 30mm thick of 2nd class soft wood, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted without and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I sectin B clause 8.24 (a) |
| 38 | Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed. |
| 39 | Factory made solidpanel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVCchannel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed. |
| 40 | 150mm long mild steelbarrel tower bolts, stove enamelled black, with bright bolts fixed, complete all as specified and directed. |
| 41 | 150mm long, mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed. |
| 42 | 100mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. |
| 43 | 100mm long mild steelbarrel tower bolts, stove enamelled black, with bright bolts fixed, complete all as specified and directed. |
| 44 | 100mm long, mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed. |
| 45 | 250mm size Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapleplate and fixed |
| 46 | Brick work with sub class "B" bricks straight or curved on plan, exceeding 6m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and as directed. |
| 47 | 6mm thick plywood, grade BWR, type BB, fixed in ceiling flat and sloping with nails to timber frame work, complete all as specified and directed. |
| 48 | 2nd class softwood plain fillets square/rectangular or triangular in section of sectional area exc 13 Sqcm but n exc 25 Sqcm including dismantling old unsv fillets, complete all as specified and directed. |
| 49 | 2nd class softwood plain fillets square/rectangular or triangular in section of sectional area exc 3 Sqcm but n exc 6 Sqcm, complete all as specified and directed. |
| 50 | 2nd class softwood plain fillets bull nosed splayed chamfered or rounded on one edge or face in section of sectional area n.exc 3 Sqcmcomplete all as specified and directed. |
| 51 | S&F in repair vitreous china, wash hand basin, flat back of size 550mmx400mm with brackets including cutting for and pinning in ends of brackets, including 32mm dia waste fitting, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 52 | S&F in repairs vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) but including PVC (SWR) "P" trap, jointing to flush pipe complete and making good to floor in cement concrete M-5 (1:5;10), type E-2 using 40mm graded crushed stone aggregate, complete all as specified and directed. |
| 53 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including "P" or "S" trap, seat cover and fixing bolts, flushing cistern and flush pipe & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated), complete all as specified and as directed. |
| 54 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 55 | 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed in repairs to wooden plugs with chromium plated brass screws and cup washers |
| 56 | S & F in repair 15mm dia pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered "Hot" and "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 57 | S & Fin repair 15mm bore bib tap, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed. |
| 58 | S&F in repairs 15mm bore stop valves, fancy type, chromium plated withlong shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed. |
| 59 | S&F in repair 15mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed, complete all as specified and directed. |
| 60 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm,complete all as specified and directed. |
| 61 | S&F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets,complete all as specified and directed. |
| 62 | Supply & Fixing in repairs brass chromium platedtubular towel rail , 20mm dia ,60cm long between flangescomplete all as specified and as directed. |
| 63 | Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismantling of existing tank, complete all asspecified and directed. |
| 64 | Preparation of new CGI/PGI steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over a coating of mordant solution including washing the surfaces, complete all as specified and directed. NOTE: Work to be carried upto 10m height. |
| 65 | Preparation of old painted GI/steel surfaces of any description not otherwise described over 10cm width or girth as in roof and applying one coat of synthetic enamel paint complete all specified and directed. NOTE: Work to be carried upto 10m height. |
| 66 | Dismantling boarding of any description, fixed in any position with nails, complete all as specified and directed. |
| 67 | S&F block boards 18/19mm, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work , complete all as specified and directed |
| 68 | Steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed and concealed to wallsand ceiling or laid in floor, complete all as specified and directed. |
| 69 | All as per the description of item No. 68 here-in- before but except tubing. |
| 70 | Steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 71 | All as per the description of item No. 70 here-in- before but except tubing. |
| 72 | S & F in repair 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 73 | S & F in repair 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 74 | 110mm bore dia PVC (SWR) bends, complete all as specified and directed. |
| 75 | 75mm bore dia PVC (SWR) bends, complete all as specified and directed. |
| 76 | 2nd class softwood, as in scantling and similar work, clean sawn, timber fixed in position, complete all as specified and directed. |
| 77 | All as per the description of item No. 76 here-in- before but except timber. |
| 78 | S&F in repairs 75mm dia outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement, complete all as specified and directed. |
| 79 | 10mm thick rendering on fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed. |
| 80 | 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 81 | Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of alkali-resistant priming coat, complete all as specified and directed. |
| 82 | Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over chalk whiting, on plastered surfaces prepara-tory to distempering, complete all as specified and directed. |
| 83 | Preparation of old surfaces of walls, plastered or unplastered including brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of white or tinted oil bound distemper on wall, complete all as specified and directed. |
| 84 | Preparation of old surfaces of walls, plastered or unplastered including brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement based paint on wall, complete all as specified and directed. NOTE: Work to be carried upto 10m height. |
| 85 | Preparation of old painted wooden surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
