|
| 1 | Dismantling surfaces of old concrete/terrazo floor with Mason\"s hammer by picking, sweeping clean and washing down with water to remove dust, etccomplete all as specified. |
| 2 | Material and labour for 20-25 mm thick machine cut kota stone slab 600mm x 600mm size flooring over and incl 20mm thick screed bed in cement mortar 1:4, roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry with 3 kg/sqm with pigments to match the shade of slab including cutting, rubbing and mirror / granite finish polishing complete all as specified and directed. |
| 3 | All as per Ser item No 2.00 above but on vertical surfaces such as skiting dado, riser etc over and incl 10 mm thick cement plaster in cement mortar 1:4 as in back coatscomplete all as specified. |
| 4 | Taking down cement plaster of any descriptionany thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water all as specified. |
| 5 | M&L White Marble20mm thick machine cut, bedded jointed and pointed with neatcement slurryand pointed with white cement including cutting and polishingincluding 15 mm thick screed bed in cement mortar 1:4 (Only for Borders lines) |
| 6 | M&L for 20 to 25 mmthick machine in cut kota stone slab fortreads (Single piece stone) & landings of stair cases over and incl 15mm thick bedding layer cement mortar 1:4with pigments to match the shade of slab including cutting, rubbing and mirror/granite finishpolishing complete all as specified and directed by Engr-in-Charge.(Length of tread not less than 1.40 mtrs). |
| 7 | All as per ser itemNo 6.00 above but on vertical surfaces such asriser (Single piece stone) etc over and incl 10 mm thick cement plaster in CM 1:4 at in back coat rough finished surface to receive tilescomplete all as specified. (Length of riser not less than 1.40 mtrs) |
| 8 | Rounding/mouldingto edges of Kota stone slabs/marble stone/granite stone slabs one edge, such as in steps, cooking platform , and other similar situations etccomplete all as specified. |
| 9 | M&L Granite (Lakha Red) 18-20mm thick machine cut, bedded in 15 mm thick screed in Cm 1:6 and jointed with neat cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishingcomplete all as specified. |
| 10 | All as per Ser item No 9.00 above but on vertical surfaces such as skiting dado, riser etc over and incl 10 mm thick cement plaster in CM 1:4 rough finished surface as in back coatto receive tiles complete all as specified. |
| 11 | Dismantlingfloor hearth or wall tilingincludingcement mortar bedding (but not backing)anddisposal of rubbish outside MD land complete all as specified |
| 12 | M&L Double charged Virified tiles 10 mm thick (square/ rectangular) polished, area of each tiles (Size 1200 mm x 600 mm), in floors including screed bed 15 mm thick in CM 1:6 and neat cement slurry etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles all as specified. |
| 13 | All as per Ser item No 12.00 above but in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles including back coat of 10 mm thick in CM 1: 4 complete all as specified and directed. |
| 14 | Demolition of reinforced cement concrete ofroof projections and downward facias in any position complete all as specified and directed. (Working height = Not less than 6.00 mtrs) |
| 15 | M&L scraping and cleaning of rusted reinforcement bars exposed due to demolition of Dilapilated roof projections (Demolition of concrete measured separately in item no 14 above) as as specified and directed. (Working height = Not less than 6.00 mtrs) |
| 16 | M&L TMT Mild steel bars 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends or welding where necessary and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by Engr-In-Charge. (Working height = Not less than 6.00 mtrs) |
| 17 | M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges and all the supports required to make the formwork firm and stable to take the load of the casting, complete all as specified and directed. (Working height = Not less than 6.00 mtrs) |
| 18 | M&L for Reinforced Cement concrete 1:2:4 (Nominal mix) Type B0 (using 12.50 mm graded stone aggregate as in chajjas, downward facias and similar works all as specified and directed. (Working height = Not less than 6.00 mtrs) |
| 19 | M&L for Rendering 10 mm thick in cement mortar 1:3 on concretesurface (On item no: 18 above) finished even and smooth without using extra cement all as specified. (Working height = Not less than 6.00 mtrs) |
| 20 | M&L forpreparing new plastered or unplastered wall surfaces and applying two coats of cement base paint to match the existing colour scheme over one priming coat all as specified and directed by Engr-in-charge. (Working height = Not less than 6.00 mtrs) |
