Council Of Scientific And Industrial Research-CSIR has published Tender For Upgradation Of Instrumentation Area In N.K. Jain Block, Computer Cell & Projection Room In Auditorium, Gis Lab, Compost Quality Testing Lab, Administration A.O. Office, Damaged Boundary Wall, Food Processing Rear Store Area. Submission Date for this Tender is 14-12-2023. Auditorium Construction Tenders in palampur Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-12-2023 |
| Sl. No. | Item Description |
| 1 | Steel work in built up tubular (round, square or rectangular hollow tubes and welded mesh etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes and welded mesh. |
| 2 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) |
| 3 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) |
| 4 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on both sides. |
| 5 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness. |
| 6 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 7 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.: Twin rubber stopper |
| 8 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 9 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm |
| 11 | Providing and fixing modular type under bench cabinet over all size 1.70m x 0.70m (or part thereof) 0.60m deep, with one no. Intermediate horizontal partition and two no. Intermediate vertical partitions. The cabinet size shall be fixed two nos. 0.15m deep drawers and shutters in rest of the front area excluding one 1/3rd portion. Prelaminated MDF board of 18mm thickness shall be used except on back sides of cabinet and bottom of drawers which shall be 8mm thickness. The shutters and drawers shall be fixed with 10mm stainless steel C type handles. The shutters shall be fixed with spring hinges and 40mm cupboard locks to approved make. Th e drawers shall be fixed with powder coated telescopic channel of approved make. The exposed edges of board is to be covered with matching lamination 0.8m thick/ painted with epoxy paint matching to the colour of the laminated board, complete as per drawing, design. The MDF board shall be of approved manufacturer, ISI marked conforming to IS: 14587, exterior grade with choice lamination on one side and balancing lamination on other side. Only front area of the cabinet shall be measured for payment. |
| 12 | Providing and fixing side cabinet of sixe 1.50m (long)x0.45m (Overal depth)x0.75m (high, including skirting). The cabinet is to be fixed with one no. Intermadiate vertical partition and one no. Intermediate horizontal partition. ( removable type). The top board of the cabinet shall be projected by 25mm on front side beyond overal depth of the cabinet. The cabinet shall be fixed with 4 nos. 0.15m)deep) drawers on top and 4 nos. shutters in rest of the front area above skirting. The cabinet is to be fabricated out of 18mm thick prelaminated MDF board. The thickness of the board on back side of the cabinet and bottom of the drawers shall be 8mm. The shutters and drawers shall be fixed with 8 nos. 100mm C type SS handles and six nos. cupboard locks. The drawer shall be fixed with power coated telescopic channles of approved make. The exposed edges of the board shall be covered with matching lamination 0.8mm thick/painted with epoxy paint of matching colour. The cabinet shall be fixed with 4 nos. PVC shoes. The MDF board shall be of approved manufacturer, ISI marked conforming to IS:14587. The front area of the finished table shall be measured for payment. |
| 13 | P/f Student table of overall size 1.10mt long x0.70m deepx1.65m total height. Lower part of table shall have a vertical partiton, one shutter and one drawer 0.15cm deep & 15cm deep long. The upper portion of table shall have two intermediate partitions & shutters 1.10x0.38m size. Prelaminated MDF board 18mm thick shall be used in table except on back & drawer bottom which shall be 8mm thick . The exposed edges of board is to be covered with 0.8mm lamination of matching colout/epoxy 40mm cupboard lock of approved make shall be provided in the cabintes. The Cabinet shall be fixed with 6 nos. PVC shoes. MDF board shall be of approved manufacturer, ISI marked conforming to IS:14587, exterior grade with choice lamination on one side and balancing lamination on other side, complet as per drawing design. |
| 14 | Providing and fixing machine cut mirror polished black granite 18mm thick in size 1.8m x 0.75m or part there of on table top complete in all respects. |
| 15 | Providing edge moulding to 18 mm thick marble stone counters, Vanitiesetc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge. Granite work. |
| 16 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 17 | Providing and fixing of adjustable PVC shoe of size 40mm complete with nut and bolt as per requirement including welding of washer & net on bottom table frame. |
| 18 | Providing and fixing overhead cabinets0.75m wide and 0.50m deep with partitions as per drawing & design made out of 18 mm thick one side choice lamination interior grade phenol bonded type II - 3 layer particle board of Dura Tuff laminated MDF Board/ or equivalent conforming to IS 12406-1988 of approved colour & design on all sides including top and bottom except on back.The shutter shall be provided in the front face with spring hinges and will be made out of 18 mm thick prelaminated board as per above specifications.The back of the cabinet shall be provided with 8 mm thick one side choice lamination- prelaminated board as per above specification.All the exposed surfaces of the board shall be painted with epoxy paint matching to the laminated board with necessary putty etc.The shutter shall be provided with approved and best quality cup board lock complete in all respects as per the direction of the engineer in charge.Only front face area of the cabinet shall be measuredand paid for payment. |
| 19 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions C.P. brass three outlet swan neck tap complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 600x450x200 mm |
| 20 | P/f Aluminium composite panels for exterior applications, 3 mm thick, with Aluminium thickness 0.25mm, with PVDF coatings, in metal colours, in walls cladding/false ceiling including filling of joints with Silicon, Excluding frame work on backing. |
| 21 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 22 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.Armstrong mineral fibre ceiling tiles (Prima Aderia) micro perforation of size 600 x 600 mm. |
| 23 | Providing and fixing solid 80mm thick double skin Panel for clean room in walls/ partitions, made up of 0.6mm thick (TCT) Polyester powder coated G.I. Sheet on both sides of panel, filled CFC free puff of (density 40Kg/cum), including other required acessories, end channels/Floor runner, Silicon application at desired locations complete in all respect. The finished area on site shall be measured for payment. Deduction shall be made for all cutouts/ openings measuring more than 1.5sqm. Each Panel shall be having one vertical concealed PVC conduit 32mm dia for making electrical circuits. |
| 24 | Providing and Fixing in single rebate door frame of required size made out of 1.2 mm thick G.I. Sheet formed to single rigid profile of size 80mm x 45mm. The door frame shall have back plates as reinforcement on all jaws for taking all hardwares, including fixing in position with anchor bolts. The door frame shall be finished with 50 microns epoxy powder coat including fixing of high quality rubber gasket for sealing its with shutter. The rebate shall be suitable for fixing of shutter of required thickness. |
| 25 | Providing and fixing double skin door leaf (single/double), 44 mm thick made out of 0.8mm thick GPSP metal sheet including 38 density PUF infilled. The finish shall be 50 microns epoxy powder coating and will have provision of fixing hardware excluding cost of hardware but including costing S.S hinges 125 x 64 x 1.9mm concealed Tower bolt, Door bottom Seal complete in all respect. |
| 26 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, ofaproved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 28 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter (600 mm over all girth) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
