Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-12-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-12-2023 |
| 2 | 11-12-2023 | Amendment | BOQ | 20-12-2023 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each including Builders Hardware and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed. |
| 2 | Taking down chowkats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each including Builders Hardware and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed. |
| 3 | Taking down shutters of any description exc 1 Sqm and n.exc 2.00 Sqm each including Builders Hardware and removing from site complete all as specified and as directed. |
| 4 | S&F factory made pressed steel frames confirming to IS, having profile of size 125 x 60 mm, 1.25 mm thick MS Sheetfor doors with one or more rebates including necessary Supply & fixing lugs, lock strike plate, etc 100 mm size MS hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed. |
| 5 | S&F factory made pressed steel frames confirming to IS, having profile of size 105 x 60 mm, 1.25 mm thick MS Sheetfor doors with one or more rebates including necessary Supply & fixing lugs, lock strike plate, etc. 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed. |
| 6 | S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour printed PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 7 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as specified and as directed. |
| 8 | S&F of factory made 30mm flush shutter, machine pressed architects veneer designer ply lam both side flush door shutter solid core construction with block board core including 5mm thick teakwood lapping around complete all as specified and as directed. |
| 9 | S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitered beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed. |
| 10 | Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including the cost of EPDM rubber /neoprene gasket required including taking down old windowcomplete all as specified and directed.(a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831)(b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832)(c) Top & side Members of shutter Section shall beof size 18.00 x 40.00 x 1.55 (Section No 20738)(d) Shutter Interlock Section shall beof size 18.00 x 40.00 x 1.45 (Section No 20737)(e) Bottom Members of shutter Section shall beof size 18.00 x 40.00 x 1.55 (Section No 20736) |
| 11 | S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) partition wall or fixed type window/ ventilator made out of aluminium anodized standard hollow section 100x40x1.60mm thick snap fit beading standard rubber gasket 5.5mm thick glass or 12mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing light grey lamination including taking down of old wooden partition complete all as specified and as directed. |
| 12 | S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) ventilator, partially glazed and partially louvers, outer frame & mullionfabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (section No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and as directed. |
| 13 | S&F powder coated anodized aluminium door made out hollow extruded aluminium sections as mentioned below. Each door having 02 Nos disk or D type handles of 200mm long, 02 Nos aluminium tower bolt of 200mm size, 1 no mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu /Titz or equivalent as approved by the GE) shutter to be paterly glazed with 5mm thick tinned glass and partly paneled with 12mm thick prelaminated particle board fixed with glazing clips rubber beading /gasket anodized aluminium beading screws complete including taking down old unserviceable shutter with frame complete all as specified and as directed. (a) Chowkat frame : 100 x44 x1.60 mm(b) Shutter vertical style : 100 x44 x1.60 mm(c) Shutter lock rail : 150 x44 x1.60 mm(d) ShutterTop rail : 100 x44 x1.60 mm(e) Shutter bottom rail :200 x44 x1.60 mm |
| 14 | S&F for 12 mm thick toughen glass shutters (openable type), with diamond polished clear glass including all hardware fittings detailed as under, fixed in position as per manufacturer instruction complete including necessary itching on door as required at site complete all as specified and as directed. (a) Stainless steel top patch (Cat No EPF-701) 01 Set.(b) Stainless steel top pivot (Cat No EPF-712) 01 Set.(c) Stainless steel bottom patch (Cat No EPF-702) 01 Set.(d) Glass to wall Stainless Steel lock (cat No EPF-799)01 No(e) Stainless steel floor door spring (Cat No FH-ECO-842) 01 Set.(f) Stainless Steel Handle 300 mm size (Cat No ESBH -011) - 2 Nos For Each shutter Note: Cat No mention above for Hardware fitting are of make ENOX, contractor may use similar type hardware fitting of make DORMA/OZONE or equivalent as approved by GE. |
| 15 | M&L for PCCtype C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete inframe filling , gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work as required all complete all as specified and as directed. |
| 16 | S&F of Stainless Steel butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed. |
| 17 | S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 18 | S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 19 | S&F aluminium anodised extruded fabricatedtype handle 150mm long complete all as specified and as directed. |
| 20 | S&F aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed. |
| 21 | S&F door stopper of size 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 22 | S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed. |
| 23 | M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 24 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 25 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 26 | M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 27 | M&L for preparation of new primer applied steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 28 | M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 29 | Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one complete all as specified and as directed. |
| 30 | S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 31 | S&F for 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 32 | M&L in repair for 5.5mm thick sheet glass ordinary quality and glazingin square exc. 0.5 Sqm in each pane as in Aluminium door & windows including supplying and fixing of necessary aluminium cleats, rubber gaskets etc and making good complete all as specified and as directed. |
| 33 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed. |
| 34 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed. |
| 35 | Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed. |
| 36 | M&L for brick works with fly ash bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 37 | M&L of brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 except bricks complete all as specified and as directed.Note: The bricks obtained from demolition shall be reused. |
| 38 | M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and as directed. |
| 39 | Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 40 | M&L for applying average 20mm thick plaster in two coats (10+10mm) with ready-mix pre-packed proportioned dry mix mortar, blended with PP fibres, mixed with liquid water proofing compound on top layer on fair faces of brick wall or concrete surfacesadditives on external surfaces as per manufacture\"s instructions including transporting of material, mixing, curing, scaffolding etc complete all as specified and as directed.Note : Liquid water proofing compound will be measured and paid separately as supply only. |
| 41 | M&L for rendering 5 mm thick cement plaster on ceiling cement mortar (1:3) finished even & fair without using extra cement complete all as specified and as directed. |
| 42 | M&L 15mm thick rendering in cement mortar 1:6 onfair faces of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and as directed. |
| 43 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 44 | M&L for preparation of newly plastered surface of wall and applying two coats of colour/white wash to match the colour of existing adjecent surface complete all as specified and as directed. |
| 45 | M&L forpreparation of newly ceiling plastered surfaces and applying three coats of white wash on wall complete all as specified and as directed. |
| 46 | M&L for preparation of new surface applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 47 | M&L for preparing of old surfaces of walls and applying one coat ofacrylic emulsion distemper on plastered surface complete all as specified and as directed. |
| 48 | M&Lfor preparation new internal wall surfaces and apply one coat wall putty and two coats of distemper acrylic emulsion over one coat of primer complete all as specified and as directed. |
| 49 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking down cement plaster complete all as specified and as directed. |
| 50 | M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and directed. |
| 51 | S&Fforcoloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors/skirting etc set and jointed in neat cement slurryover 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match complete all as specified and as directed |
| 52 | M&L for 1st quality double charged/ultra charged Vitrified Ceramic tiles dark shade 7-8 mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floorsetc set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 53 | M&L for 1st quality double charged/ultra charged Vitrified Ceramic tiles dark shade 7-8 mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 Sqm in skirtingetc set & jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 54 | M&L for DIGITAL ELEVATION TILES of size 300x450 x 7-8mm/300x600x7-8mm thick on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed. Notefor Item No. 50 to 54 :-(a)The rates include for all straight cutting and waste including raking or circular cutting and waste complete.(b) All corners in wall tiling should be properly metered jointed to give monolithic uniform appearance.(c)Design/pattern of vitrified tile flooring shall be as approved by Engineer-in-Charge/GE. (d) The rates for tiling includes for laying to any pattern with one or more colors as directed.(e) If tiles of different sizes are used then no price adjustment shall be made. |
| 55 | M&L for 18 to 20mm thick jet black granite machine cut, pre polished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigmentto match the shade of granite stone as in kitchen platform, flooring and as vertical surfaces including grinding mirror polishing and molding the exposed edges laid over 15mm thick screed bed in CM 1:6 including cutting space for sink where required complete all as specified and as directed. |
| 56 | Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed. |
| 57 | M&L for PCC (1:3:6) type C-2 (40 mm graded aggregate) as in plinth protection including finishing the concrete surface even and smooth w/o using extra cement complete all as specified. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume. |
| 58 | M&L for75mm thick PCC 1:4:8 type D-2 as in sub base using 40mm graded mechanically crushed stone aggregate complete all as specified and as directed. |
| 59 | Providing and laying of300x300 mm/200 x 200 mm & 10mm thick Anti-Skid pavement tile Endura vitrified tile of \"H & R Johnson India\"or equivalent in pavit or NITCO in approved color & Shade and in anti skid finishset and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 20 mm thick screed bed in cement mortar 1:4complete all as specified and as directed.Note: Design/pattern shall be as approved by GE at the time of exection. |
| 60 | M&L forPCC 1:2:4 type B-1 as in bounding of edges of interlocking tilesand the like including watering & lightly rounded or chamfered angles and throating as directed complete all as specified and as directed. |
| 61 | Taking down Wall paneling and similar work complete all as specified and as directed. |
| 62 | S&F Solid PVC Wall Lining consisting of 5mm thick Single Side Prelamcolour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 63 | S&F 5mm thick PVC sheet fillet of width35mm for wall paneling inclusive offixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 64 | M&L for water proofing treatment to sunken floor with the following course of treatment/ specification:(i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrer\"s instruction laid in slope 1:20 towards spouts including coveting corners(ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as per remanufacturer\"s instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed with acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry @ 0.242 kg/sqm mixed with acrylic based polymer modified cementenous compound @ 0.126 kg/sqm. This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs.(v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation .(Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalent approved brand as approved by GE. Make of PU paint - Dek guard PU or equivalent approved brand as approved by GE. (vii) 2 Nose 32mm bore GI medium grade 450mm long spout ,to be provided through external wall to drain out accumulated water. (vii)Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 complete all as specified and as directed. |
| 65 | S&F 25 mm dia stainless steel curtain rod with required brackets for fixing to wall including decorative finials at each end (in pair) complete as in repairs complete all as specified and as directed. |
| 66 | Demolition of wall and ceiling board (Fibre, pulp, insulation etc.) or insulation board /slab/blankets any thickness including cover filletcomplete all as specified and as directed. |
| 67 | Supply & fixing false ceiling with Gl powder coated frame work and 4 mm thick (E-board) non asbestos fibre reinforced cement board, reinforced design board tiles conforming to IS-14862 of approved texture at all height duly suspended ceiling laid on hot dip galvanised iron imposed dried of size 600 mm x600 mm, T section/ Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0/1:3 cement mortar complete all as specified and having following details.(a) 27mm x 27mmangle 0.55 mm thickness,GI powder coated hot dip galvanized plugged at the rate 600mm centre to center alongwith te perimeter of wall.(b) 25 mm x 25 mm Tee 0.55 mm thickness,GI powder coated hot dip galvanised as main and cross runner suspended with 1.6 mm dia GI wire suspendrs (not exc 1.2 mtr length) with ajustable clamps and dash true fastners plugged in RCC slab or angle iron runner of slopped roof placed at therate 600 mm centre to centre alongwith the perimeter of wall.Note : The work shall be carried out as per manufacturer instruction and as directed. |
| 68 | M&L for Gypsum board 12 mm thick (Gyproc) for seamless false ceiling to flat surface fixed with screw over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centreincluding finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish complete as per manufacturer instruction. |
| 69 | Supply and fixingfor Gypsum Board 12 mm thick cornices up to 100 mm wide along the false ceiling on vertical surfacesfixed with cadmium plated screw, design as approved by GE complete all as specified and as directed. |
| 70 | M&L applying two coats of plastic emulsion paint on wall/ceiling surfaces of any description over 10 cm girth or width not other wise described over a coat of primer over two coats of wall care putty complete all as specified and as directed.rge. |
| 71 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed. |
| 72 | S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed. |
| 73 | Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed.Note:The serviceable steel tubing obtained from taking down shall be reused. |
| 74 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing etc and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed. |
| 75 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and as directed. |
| 76 | S&F of tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floorscomplete all as specified and as directed. |
| 77 | Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.Note:The serviceable steel tubing obtained from taking down shall be reused. |
| 78 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 79 | S&F rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section Tube/square hollow MS pipes etc) including distance pieces, cleats etc. confirming to Fe - 410- W including cutting, welding & necessary fittings such as nut bolt, plate etc complete all as specified and as directed. |
| 80 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 81 | S&F in repair table top wash hand basin, of size500 mm x 425 mm x 130 mm including 32 mm size brass chromium plated waste coupling all fixing assoseries complete all as specified and as directed. Make: Jaquar - Cat No FLS-WHT-05935 or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 82 | S&F in repair table top wash hand basin, of sizenot less than 480 x 470x195 mm including 32 mm size brass chromium plated waste coupling all fixing assoseries complete all as specified and as directed. Make: Jaquar - Cat No JDS-WHT-25903 or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 83 | S&F in repairs Brass chromium plated 15 mm dia bib tap (long body), with wall flange, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make : Cat No. VGP-81037 of Jaquar or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 84 | S&F in repair two way bib cock with wall flange complete all as specified and as directed. Make : Cat No. VGP-81041 of Jaquar or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 85 | S&F as in repair 15mm bore brass chromium plated single lever tall boy with 180 mm extension body fixed spout basin mixture with pop up waste system with 600 mm long braided hoses etc complete all as specified and as directed. Make: Jaquar Cat No VGP-81021N or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 86 | S&F in repair 15mm bore brass chromium plated angular stop cock regular bodywith adjustable wall flange complete all as specified and as directed. Make: Jaquar Cat Pat No VGP 81053 or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 87 | S&F in repair brass chromium plated fancy type towel ring square fixedetc complete all as specified and as directed. Make :JaquarCode : AKP-35721P or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 88 | S&F in repair Overhead Shower 200x200mm Square Shape Single Flow (ABS Body Chrome Plated with grey face plate) with Rubit Cleaning System complete all as specified and as directed. Make: Jaquar - Cat No OHS-35497 or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 89 | S&F in repair brass chromium plated concealed stop cockfor 15mm pipe with fitting sleeve, operating lever & adjustable wall flange with seal complete all as specified and as directed. Make : JaquarCode : OPP-150 83KPM or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 90 | S&F in repair for Bowl with Cistern for coupled WC with UF soft close slim seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set, Size - 375 x 650 x 800 mm, S Trap - 250mm or P trap - 180 mm complete all as specified and as directed. Make : Jaquar Cat No. ARS-WHT-39751S250UFSMZ / ARS-WHT-39751P180UFSMZ or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 91 | S&F in repair hand shower (health Faucet) with 1 meter long easy flex tube in chrome finish and wall hook with N.R.V (Back flow preventer) complete all as specified and as directed. Make:- Jaguar - Cat No ALD-579 or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 92 | S&F in repair 15mm bore brass chromium plated single lever exposed shower mixer Pipe (Jaquar Cat Part No. SHA-1211 NH & SHA-1213 or equivalent as approved by the GE) and hand shower with connecting legs and wall flanges etc including supply and fixing exposed shower pipe round shape 25 mm size 1050 x 350 mm (Make : Jaquar Cat no. SHA-1213 or equivalent as approved by the GE) with provision to adjust height upto 250 mm with wall bracket for connection to overhead shower & sliding holder for hand shower complete all as specified and as directed. Make : Jaquar Cat Pat No ARI-39145 for mixer or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 93 | S&F in repairbrass chromium plated ø25 x 38 mm oval shape single flow (ABS body & face plate chrome plated with grey face plate) with rubit cleaning system complete including supply and fixing easy flex tube chrome finish 1.50 mtr long with nuts complete all as specified and as directed. Makes: (a) Jaquar Cat Pat No HSH-49537 For hand shower or Techno commercially equivalent inGrohe/Kohler/CERA (b) Jaquar Cat Pat No SHA-571 for flexible tube or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 94 | S&F in repair Stainless steel Towel Rail of size 600 mm with lower hanger fixed to wall complete all as specified and as directed. Make: Jaquar Cat No AKP-35711PS or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 95 | S&F in repair for looking mirror 5.50 mm thick of superior quality, any size, with approved border design fixed with commercial plywood 6 mm thick or AC board and with teak frame fixed in repair complete all as specified and as directed. Make : Modiguard/Saintgobain.Note:Design and quality as approved by GE/Engineer-in-Charge at the time of execution. |
| 96 | S&F in repair Stainless steel grade 304 cockroach type floor trap (Grating, inner & outer filter with frame) Square of size 150 mm x150 mm with or with out hole fixed with cement mortar (1:4) including all accessories complete all as specified and as directed. Make - Pryag Cat No - FT-31/ 31M, FT-32/32M or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 97 | S&F in repair Glass Shelf 600mm Long superior quality glass with CP brackets and railing fixed as in repair complete all as specified and as directed.Make: Jaquar Code : AKP-35771P or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 98 | S&F in repair 450 mm long braided hose with two 15 mm nuts & rubber washers without nipple complete all as specified and as directed.Make: Jaquar Code : ALD-805B or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 99 | S&F in repair toilet Paper roll Holder with Flap Recessed Type (Stainless Steel) complete all as specified and as directed. Make : Jaquar code: AKP 35753PSor Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 100 | S&F in repair chromium plated soap dish fixed to wall with CP brass screws complete all as specified and as directed. Make : JaquarCode : AKP-35731P or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 101 | S&F in repair Push Button Soap Dispensers Push Button Soap Dispensers, Capacity : 0.8L, Material : ABS Finish : white/smokedcomplete all as specified and as directed. Make : Jaquar Code : SDR-WHT-DJ0010F or Techno commercially equivalent make and as listed in List of Makes as approved by the GE. |
| 102 | S&F in repair Bottle Trap 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange with fully casted body (with internal partition) complete all as specified and as directed.Make - Jaguar - cat No ALD-769L250x190 or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 103 | S&F in repair for Corner Glass Shelf (with bracket) complete all as specified and as directed. Make : Cat No. ACN-1173, of Jaquar or Techno commercially equivalent make as listed in List of Makes and as approved by the GE. |
| 104 | S&F in repair for towel rack with lower hanger (stainless steel) with hook complete all as specified and as directed. |
| 105 | S&F in repair Urinal With Fixing Accessories, Size: 355x340x535 mm with flush pipe, connecting pipe & waste pipe, CP urinal spreader complete all as specified and as directed. |
| 106 | S&F in repair curved shapedUrinal partition (of size 900X 450 mm) with 10 mm thick frosted glass including all fittings and fixturescomplete all as specified and as directed. |
| 107 | Taking down PVC/AC pipe of any dia & any description including all fittings complete all as specified and as directed. |
| 108 | S&F 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and as directed. |
| 109 | S&F 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and as directed. |
| 110 | S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed |
| 111 | S&F 110mm dia PVC (SWR) junction single \"T\" equal or unequal with access door complete all as specified and as directed. |
| 112 | S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal complete all as specified and as directed. |
| 113 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 114 | M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Fins, fascias, louvres, parapets, chajja/sunshade, shelves and railings, newels, balustrade & the like complete all as specified and as directed. |
| 115 | Formwork tofins, fascias, louvres, parapets, chajja/sunshade, shelves and railings, newels, balustrade & the like Fair finished surfaces of concrete flat complete all as specified and as directed. |
| 116 | M&L Mild steel TMT bars 6mm to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality |
| 117 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same toa distance exc. 50m and n. exc.100m including roughening ofold concrete surface of roofby wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed. |
| 118 | M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces forapplying, finished even and smooth without using extra cement complete all as specified and as directed. |
| 119 | M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges, padding to roof etc complete all as specified and as directed. |
| 120 | M&L for waterproofing Coating with polyurethane based water proofing liquid membrane of approved make to be applied by brush with multi coats with minimum dry film thickness of 1 mm and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane complete all as specified and as directed.Note: The above treatment will be carried out by authorised applicator of approved firm/company. |
| 121 | M&L for preparation of old decorative surface of walland applying two coats of colour/white wash to match the colour of existing surface complete all as specified and as directed. |
| 122 | M&L forwashing, rubbing down and scraping of old decorated surface andpreparation of oldceiling plastered surfaces forapplying one coat of white wash on wall complete all as specified and as directed. |
| 123 | M&L for washing, rubbing down and scraping of old decorated surface andpreparation of oldwall plastered surfaces forapplying one coat of white/colour wash on wall complete all as specified and as directed. |
| 124 | INTERNAL ELECTRIFICATIONTaking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed. |
| 125 | M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with allaccessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylam sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB\"s or common earth dolly for one light point controlled by one, one way switch complete all as specified and as directed. |
| 126 | All as per item No 125 here in before but for one ceiling fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed. |
| 127 | All as per item No 125 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed. |
| 128 | All as per item No 125 here in before butfor one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed. |
| 129 | All as per item No 125 here in before but for one bell point controlled by one, bell switch 5 Amps complete all as specified and as directed. |
| 130 | All as per item No 125 here in before but for light point controlled by two way switch Amps complete all as specified and as directed. |
| 131 | All as per item No 125 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including running of2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed. |
| 132 | S&F switch piano single pole flush type 5 amps, 230 Volts one way complete all as specified and as directed. |
| 133 | S&F switch piano single pole flush type 5 amps, 230 Volts two way complete all as specified and as directed. |
| 134 | S&F socket 2 in 1, 5 Pin, 5/6 Amps, white ivory finish flash type complete all as specified and as directed. |
| 135 | S&F socket 2 in 1, 5 Pin, 5/15 Amps, white ivory finish flash type complete all as specified and as directed. |
| 136 | S&F switch piano single pole flush type 15 Amps, 230 Volts one way complete all as specified and as directed. |
| 137 | S&F switch socket combination 2 and 3 Pin, 5/6 Amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and as directed. |
| 138 | S&F of socket outlet 2 in 1, 5 Pin 5/15 Amps multipurpose 230 Volts flush type complete all as specified and as directed. |
| 139 | S&F in repair ceiling rose, bakelite, surface type, 220/240 Volts, three terminals complete all as specified and as directed. |
| 140 | S&F in repair switch piano single pole flush type 5 Amps, 230 Volts one way complete all as specified and as directed. |
| 141 | S&F in repair switch socket combination 2 and 3 Pin, 5/6 Amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and as directed. |
| 142 | S&F in repair of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed. |
| 143 | S&F of stepped type modular electronic fan regulator 120 watt 2 module suitablefor 1200/1400 mm sweep energy saving fans, ISI marked complete all as specified and as directed. |
| 144 | S&F in repair lamp holder, insulated body, with back plate suitable for batten/anglefittings complete all as specified and as directed. |
| 145 | S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed. |
| 146 | S&F Call bell Ding dong, 230 Volt single phase complete all as specified and as directed. |
| 147 | S&F in deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary stepwhite/ivory finish complete all as specified and as directed. |
| 148 | S&F in repairhylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and as directed. |
| 149 | S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and as directed. |
| 150 | S&F in repair hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and as directed. |
| 151 | S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and as directed. |
| 152 | S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 153 | S&F of Bulk head luminaire with B22 base holder suitable for 9 WattLED inverter type bulblight IP66 grade,with and including 9 watt LED (or nearest next higher wattage) lamp (LED Bulb with B22 base 900 Lumens in normal mode and 450 lumens in power back up mode, charging time 8-10 Hrs and around 4 Hrs Power backup with inbuilt surge protection of 3 KV) (or nearest next higher wattage) and connecting up with and including PVC insulated3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 154 | S&F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unserviceable fitting complete all as specified and as directed. |
| 155 | S&F of Decorative wall light fixture made up of polycarbonate suitable for 15 WattLED retrofit of type B-22 base, IP66 grade, with and including 15 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 156 | S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 157 | S&F post top lanterns 20 watt LED light fitting, new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements and taking down the old unserviceable fitting complete all as specified and as directed. |
| 158 | S&F Recess mounting flat panel 34 Watt LED fitting (2\"X2\") for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection and taking down the old unserviceable fitting complete all as specified and as directed. |
| 159 | S&F Recess round shape LED ceiling light 12 Watt fitting (6\"\" outer dia) for armstrong/grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection and taking down the old unserviceable fitting complete all as specified and as directed. |
| 160 | M&L for sub main wiring with 2 run of 6.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts gradewith stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in suitable PVC rigid non-metallic concealed conduit with and including taking down unserviceable sub main, complete all as specified and as directed.Note : Two runs of submain wiring cable alongwith one run of earth wire with and including PVC conduit pipe shall be measured as one unit length. |
| 161 | M&L for sub main wiring with 2 run of 4.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts gradewith stranded copper conductor includingone run of 2.5 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non-metallic concealed conduitwith and including taking down unserviceable sub main, complete all as specified and as directed.Note:Two runs of submain wiring cable alongwith one run of earth wire with and including PVC conduit pipe shall be measured as one unit length. |
| 162 | M&L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incoming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc including taking down of old existing one complete all as specified and as directed. |
| 163 | S&F of moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 160 Amps of breaking capacity 36 KA after and including taking down/dismantling of old existing unserviceable one complete all as specified and as directed. |
| 164 | S&F sheet metal enclosure MCB DBTPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unserviceable sheet metal enclosure complete all as specified and as directed. |
| 165 | S&F sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including removal of old unserviceable sheet metal enclosure all as specified. |
| 166 | S&F MCB, triple pole & neutral 40 to 100 amps, 240 volts, ‘C’ curve, 10KA including taking down old existing one complete all as specified and as directed. |
| 167 | S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed. |
| 168 | S&F MCB, Single pole, 5 to32 amps, 240 volts, ‘C’ curve, 10 KAall complete with and including taking down old unserviceable one complete all as specified and as directed. |
| 169 | S&F Single pole and neautral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessary connection complete all as specified and as directed including taking down old one. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
