Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-12-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-12-2023 |
| Sl. No. | Item Description |
| 1 | Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loosesoil as specified & as directed |
| 3 | Excavation in trenches exc 1.5 m & n.exc 3 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 3 m in depth and getting out in soft/loosesoil as specified & as directed |
| 4 | M&L Cement concrete 1:4:8, Type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete etc complete all as specified & as directed |
| 5 | M&L flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter all as specified & all as directed. |
| 6 | M&L for RCC M-25 (Desigh mix) (20mm graded stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, all as specified and directed. |
| 7 | M&L form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape all as specified & as directed. |
| 8 | M&Lfor RCC M-25 (Design mix) (using 20mm graded stone aggregate) for columns, pillars, pierrs, posts & struts etc all as specified and directed. |
| 9 | M&L flat form work to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc all as specified and directed. |
| 10 | M&L for RCC Design Mix M-25 (using 20mm graded stone aggregate) for beams cantilevers bressumers, lintels over 1.5m span etc all as specified and directed. |
| 11 | M&L for flat rough finished surfaces Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc all as specified & all as directed |
| 12 | M&Lfor RCC Design mix M-25 (using 20mm graded stone aggregate)for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc all as specified and directed. |
| 13 | M&L for form work to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in valls etc rough finished surfaces of concrete flats. |
| 14 | M&F formwork to rough finished surfaces of contrete ofchullah hoods, chajjas, troughs and similar items including edges as specified and directed. |
| 15 | M&L for RCC design mix M-25 (using 20mm graded stone aggregate) as in chajjas all as specified and directed. |
| 16 | M&L for DPC to horizontal or vertical surfaces including necessary form work 25mm thick PCC 1:2:4, Type B0 (12.5mm graded stone aggregate on plinth beam including mixing of water proofing compound as per manufacturers instructions and necessary form work all as specified and directed |
| 17 | M&L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 |
| 18 | M & L for brick work with fly ash sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 19 | M&L rendering 10mm thick 1:6 on surfaces other than fair faces of brick work or concrete surface surface finsihed even and smooth without using extra cement.Complete all as specified and directed. |
| 20 | M&L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4,mixed with water proofing compound @ 3% by weight of cement or as per menufecturer instruction, surface finsihed even and smooth without using extra cement. WPC shall be measured and paid separately. |
| 21 | M&L rendering 5mm thick in CM 1:3 on ceiling surface, surface finsihed even and smooth without using extra cement. |
| 22 | M&L preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper (white or tinned) over chalk whiting complete all as specified and directed. |
| 23 | M&L applying two coats cement base paint on wall including preparing new plastered surface including 3mm wall care putty |
| 24 | M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 25 | M&L for sand filling under floor or in foundation including watering and consolidation all as specified and directed. |
| 26 | M&L, Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surfaceetc all as specified and directed. |
| 27 | M&L cement concrete 1:4:8, type D2(using 40mm graded stone aggregate) as in 75mm thick sub base of floor all as specified and directed. |
| 28 | M&L for cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) 25mm thick as in bedding layer for laying floor tiles complete all as specified and directed |
| 29 | M&L non skid coloured ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match incl 15mm thick screed bed in CM 1:6 complete |
| 30 | M&L machine cut mirror polished kota stone slab flooring20-25mm thick over including 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment dto match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete as specified and directed. |
| 31 | M&L for machine cut mirror polished kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar laid over and including 15mm thick cement screed base in CM 1:4 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete as specified and directed. |
| 32 | M & L 7 to 8mm thick glazed ceramic coloured tiles ( square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 33 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing. |
| 34 | S&F Factory made solid panel pvc doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification. |
| 35 | S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long and fixed as specified and as directed. |
| 36 | S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified and directed |
| 37 | S&F Butt hinge,Stainless steelof 100 mmsize complete all as specified and directed |
| 38 | S&F pressed steel frames size 115mm x 60mm for door with one or more rebates including necessary fixing lugs, hings, lock stike plate etc complete all as specified and directed. |
| 39 | M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) for fixing of hold fast/filling pressed steel door frame including necessary form work complete all as specified and directed. |
| 40 | S&F 30mm thick flush shutters, solide core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. |
| 41 | S&F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats complete all as specified and directed. |
| 42 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 43 | S&F 200mm long mild steel barel tower bolts of stove enamelled black with bright bolt and fixed as specified and as directed. |
| 44 | S&F 150 mm aluminium handle cast type, anodised complete all as specified and as directed. |
| 45 | S&FofSteel windows with pressed steel frame ( size 125x45x1.25mm) side hung shutter including box type hinges with steel handle, and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar (open in side) dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 07 jan 2002Note:- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (ii) MS grill shall be measured and paid seperatly under relevant item of schedule |
| 46 | S&F mild steel window with side hung shutter incl projecting type hinges with steel handle and steel peg stay complete without glazingbars,dovetailed or welded complete all as specified and directed. |
| 47 | S&F steel ventilator with top hung shutter incl hinges steel peg stay complete all as specified and directed. |
| 48 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed. |
| 49 | S&F 3.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 50 | S&F mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed. |
| 51 | Preparation of new wooden surface of any description and applying two coat of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as specified and directed. |
| 52 | S&F framed work such as grill grating etc with end of bars shouldered and/or riveted welded or forged into spikes framed guard bars iron doors ladders framed bullesters walk ways railings, frame work of water tanks and similar work confirming to Fe-410 complete all as specified and directed. |
| 53 | M&L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4,mixed with liquidwater proofing compound @ 3)% by wt of cement as per manufacturers insts, finished the surface even and smooth without using extra cement complete all as specified and directed. Note:- Cost of WPC shall be deemed to be included in qouted rate of item. |
| 54 | M&L for preparation of roof surface and applying a coat of hot bitumenous primer @ 0.40 Kg/sqm and applying a coat of industrial bitumen 85/25 grade @ 1.20 Kg/sqm, supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less than 3kg/sqm) 3mm thick consisting 100 micron HMHDPE film centre core including applying one coat of industrial bitumen grade 82/25 @ 1.20 Kg/Sqm on top surface of membrane and torch application of membrane with 100mm overlaps at side and end lap where required and finally finished with and including a coat of aluminium paint @ 0.20 ltr/sqm as per manufacture instruction complete all as specified and directed. |
| 55 | S&F fancy type curtain rod MS conduit rod PVC coated including fancy type knob and MS bracket for hanging curtain rod complete all as specified and directed. |
| 56 | M&Lprecast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in precast cover slabs (for manholes etc) including all use of forms moulds or machine moulds and setting the blocks, slabs etc in cement mortar 1:6 mplete all as specified and directed (Reinforcement shall be measured and paid separately under respective item of this schedule) |
| 57 | M&L for PCC (1:3:6) Type C1 as in plinth protection 75mm thick finished even and smooth without using extra cement all as specified and directedd. |
| 58 | M&L for cement concrete type B2 1:2:4 (40mm graded aggregate ) in surface channels and drains complete all as specified and directed. |
| 59 | Extra for forming fair finished drain or channel 30cm inner girth in cment concrete using extra cement complete all as specified and directed |
| 60 | S&F bib taps cast copper alloy 15mm size, crutch or butterfly handle, screwed down, screwe for iron pipe chromium plated. |
| 61 | S&F of 15mm pillar taps of cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and flyne\"s screwed for iron pipe and fixed as directed. |
| 62 | S&F of vitreous china wash basin white, flat, back, size 550x400mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply wate pipe all as specified. |
| 63 | S&F of 15mm bore of dia concealed stop cock cast copper alloy screwed down high pressure, with cruch or butterfly handle, screwed both ends for iron pipe all as specified and directed. |
| 64 | S&F PVC connection 15mm bore length not less than 600 mg long with both ends PTMT nuts complete all as specified. |
| 65 | S&F angle cock 15mm bore chromium plated fancy type screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 66 | S&F in repair vitreous China coloured European type WC with \"P\" or \"S\" trap 1st quality including connection to drain and fixing bolts, Health faucet completeall as specified. |
| 67 | S&F 10 ltrs PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed. |
| 68 | S&F 125 mm size swivel shower rose brass chromium plated long body fixed all as specified. |
| 69 | S&F rotational mouldred polythylene water storage tank of 1000 ltr capacity consisting of three laver (cylindrixcal vertical with top closed) hoisted and fixed in poistion including GI nipple 20mm dia fixed in water tank complte all as specified and directed. |
| 70 | S&F 20mm dia Ball valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule all as specified and directed. |
| 71 | S&F 20mm bore Gun-metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed. |
| 72 | S&F 600mmx450mm bevelled adges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed |
| 73 | S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screw and wooden /plastic cleats(min wt 170 gms) |
| 74 | S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(min wt 300 gms) complete all as specified |
| 75 | S&F 125mm grating doom with waste hole of PTMT (min wt 40gms) complete all as specified. |
| 76 | S&F 32 mm dia waste coupling of PTMT (half or full threaded) (min wt 42-45 gms) complte all as specified. |
| 77 | S&F 32mm bore low density polythylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complte to walls, ceiling or in floors etc complte all as specified |
| 78 | Cutting chases for GI consealed water tubing and making good with cement sand mortar 1:3 cutting n.exc. 10cm girth complete all as specified and directed |
| 79 | S&F 15mm bore GI water tubing medium grade galvanished with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed |
| 80 | S&F 20mm bore GI water tubing medium gared galvanished with all litting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed |
| 81 | S&F cast iron nahani trap with gratingincluding jointing to waste pipe fixed in cement concete type B-1 (1:2:4) of 75mm bore complete all as specified |
| 82 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 83 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed |
| 84 | S&F 110 mm bore PVC (SWR)vent cowl complete all as specified and directed |
| 85 | S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floor all as specified |
| 86 | S&F 75mm dia PVC (SWR) floor tarp plain with grating incl jointing with solvent cement all as specified directed. |
| 87 | M&L PVC (SWR) gully trap 125x110 mm setting in jointing with solvent cement all as specified and directed |
| 88 | S&F 100mm dia stack clamp out of 50mmx5mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed |
| 89 | S&F 110mm bore PVC (SWR) bends with oval acces door all as specified |
| 90 | S&F 75mm bore PVC (SWR) bends with oval acces door all as specified |
| 91 | Returning filling in including spreading leveling, watering and well ramming in layers not exc 25cm in soft/loose soil all as specified and directed |
| 92 | Removing excavated material n .Exc. 50m and depositing where directed at a level n.exc 1.50m above the sarting point in soils.(this soil will be filled under floor area). |
| 93 | M&L for forming embankmets including raising(or lowering) earth, spreading in layers n exc 30 cm thick watering, ramming/rolling and finishing to required size, shape etc, n exc. 1.5 m high from base with soils complete all as specified and directed by Engr-in-Charge. (Note : soil will be arranged by contractor within defence land area) |
| 94 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified. |
| 95 | M&L for mild steel TMT bars 6mmto 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified. |
| 96 | M&L for mild steel TMT bars 5mm dia and overupto and including 10mm dia in stirrups, spaces and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified. |
| 97 | S&F joint channel angle or tee section fixed indenpendtly without connecting plated inclung necessary cutting welding etc for cooler sand of Fe 410-W(Gde E-250) quality Ball as specified and directed |
| 98 | S&F relooed mild steel Fe 410(Gde-250) stairs (framed) including stingers, treades, landing, balusters, hand rails etc including cleats brackets etc complete all as specified and directed |
| 99 | Excavation in post holes or similar holes each n.exc. 0.50. cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50m and making good surfaces complete all as specified |
| 100 | M&L for cement concrete type C-2 1:3:6 (40mm graded stone aggregate) as in foundation, filling and mass concrete. |
| 101 | M&L applying two coats of synthetic enamel paints on new steel surfaces over a cot of red oxide promer including preparation of surfaces all as specified and diected |
| 102 | M&L 150 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars laidin trenches and jointes make leakage free with cement mortar 1:2 complete all as specified and directed. |
| 103 | M&L for concrete bed to drain pipes in cement concrete 1:3:6 type C-2 including packing under and haunching against the sides of pipes after they are laid and tested bore of pipe 150mm complete all as specified and directed |
| 104 | M&L for providing cement concrete type C-1 1:3:6 (20mm graded aggregate) as in copings etc complete all as specified and directed |
| 105 | M&L for Septic tanks for 10 users, exc, in any type of soil, foundationin PCC 1:2:4, fly ash brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete. all as perCEBZ TD Drg No-TD/217 Sheet 1 to 7 as attached. |
| 106 | M&L for Soakage wells exc, in any type of Soil, Foundationin PCC 1:3:6, walls of Honey combed and solid witj flyash brick and bendin RCC nominal mix 1: 1½: 3 Concrete, including intercepting chamber, screen chamber fly ash Brick work in CM, RCC cover slab in RCC nominal mix 1: 1½: 3 Concrete / filling with brick bats, complete of size3.6 M dia X 6.0 M deep all as perCEBZ TD Drg No-TD/309 Sheet 1 to 4 as attached. |
| 107 | M&L for PCC 1:2:4, type B-1 using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railings upto 60 cm in height copings, kneelers, apex stones, bed plates, kerbs not provided for, water throughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed. |
| 108 | M&L for PCC 1:3:6, type C-2 using 40mm greaded stone aggregates as in sub base flooring 100 mm thick for receiving of floor finishes etc all as directed and specified. |
| 109 | M&L Factory made Machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed. Note:- Pattern and colour of Machine pressed paver block shall be approved GE |
| 110 | Excavation in post holes (or similar holes)each and exc 0.5 cum, getting out, returning, filling in and ramming reath or broken rubble mixed with earht around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed. |
| 111 | M & L forCement concrete 1:4:8, type D2 (using 40 mm greaded stone aggregate)in foundations, filling and mass concrete complete all as specified and directed. |
| 112 | S&F post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat ireon fillets (for securing wire mesh etc) including all necessary drilling, bolting and riveting etc and similar work conforming to Fe 4410-O or Fe 130-O) complete all as specified and directed. |
| 113 | Supply only Chain Link, M S galvanised fencing (IS-272) mesh as required but weight of mesh not exc 4.0 kg/sqm complete all as specified and directed. |
| 114 | Fixing only GI chain link fencing of plain GI steel wire of dia 4mm and mesh size (50x50mm) and tying to any type of standard rails, straining with required bolts etc. including provision of binding wire complete all as specified and as directed.(Note: Weight of chain link per Sqm shall be finalised through BOO) |
| 115 | M&L for mild steel deformed or twisted bars 10mm dia for stiffening of the fencing complete all as specified and directed. |
| 116 | M&L of two coat of synthetic enamel paint over one coat of red oxideon new steel surfaces of any description over 10cm in width or girthincl preparation of surfaces complete all as specified and directed. |
| 117 | M&L for Mild steel in flat, round or square bars, in available length, conforming to Fe-410-W(Gde E-250) of quality-B complete all as specified and directed. |
| 118 | Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm but not exc 15 cm and 15mm dia complete all as specified and directed. |
| 119 | M&L for PCC 1:3:6, type C-2 (40mm graded aggregate) in foundation filling and mass concrete including surface dressing and leveling,complete all as specified and directed.(Note:- this item used at bottom of chain link fencing) |
| 120 | Point wiring in concealed PVC conduit using stranded copper conductor cable of size 1.5 Sqmm, PVC insulated unsheathed FRLS cable complete with all fittings and accessories but using existing sunken cast iron or pressed steel terminal box for mounting of switches, sockets, fan regulators etc but providing new cover 3mm thick laminated, (Hylem) sheet top cover fastened with chromium plated screws and 1.5 Sqmm PVC insulated stranded copper conductor FRLS cable as continues earth wire connected to common earth dolly complete all as specified and directed. for the following :-NOTE: for wiring in ceiling portion conduit shall be fixed with surface of ceiling/with trusses etc. |
| 121 | One light/fan point/ Exhaust fan controlled by one switch. |
| 122 | One 3 pin socket outlet 5 Amp on same board |
| 123 | One 3-pin socket outlet 5 Amp on independent board. |
| 124 | All as per Srl item No 120 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire |
| 125 | S &F switch piano flush type polycarbonate SP one way 5 Amps complete all as specified and directed. |
| 126 | S &F switch piano flush type polycarbonate SP one way 15 Amps complete all as specified and directed. |
| 127 | S &F Switch piano, flush type single pole, two way 5 Amp complete all as specified and directed. |
| 128 | S&F bell push piano flush type 5 amp single pole one way complete all as specified and directed. |
| 129 | S&F socket out let 3 pin 5 amp multipurpose flash type complete all as specified and directed. |
| 130 | S&F socket out let 3 pin 5/15 Amp multipurpose, flush type 240 volt complete all as specified and directed. |
| 131 | S&F ceiling rosePVC / polycorbonate isolated body 3 terminals with base plate ISI markedall as specified and directed.. |
| 132 | S&F Lamp holder, PVC/polycarbonate type with back plate suitable for pendent fitting of complete all as specified and as directed |
| 133 | S&F Lamp LED 9 Watt 230 Volt retrofit typecomplete all as specified and as directed. |
| 134 | S&F ceiling fan 1200 mm sweep complete with blades, down rod, electronic fan regulator stepped type and accessories 230 Volts, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor(BLDC) and marking the serial MES fan nos etcincluding electric connection with three core flexible PVC insulated copper conductor multistrandedcable 1.0 sqmm complete all as specified and as directed. |
| 135 | S&F Exhaust fansteel body AC single phase, 300mmsweep with blades, frame and louverscomplete ,and marking the serial MES fan nos etc including electric connection with three core flexible PVC insulated copper conductor multistrandedcable 1.0 sqmm complete all as specified and as directed. |
| 136 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 VoltsAC decorative type with driver holder connecting up with three core flexible copperconductor cable suitable size and taking down existing unserviceable luminaire complete all as specified and directed. |
| 137 | Supply and fixingLED light fitting 1x20 watt, 220 volts AC decorative box type with driver, holder including LED tube linghtconnecting up with three core flexible copperconductor cable suitable size from ceiing rose and taking down existing unserviceable luminaire complete all as specified and directed . |
| 138 | Supply and fixing ofLED building security light fitting Luminare of 35 Watt made uppressure die cast housing with toughened glass and high power with option of secondary optic with IP 65/66 protection complete with 1.5 meter GI tube and fixing clamps and 3 core copper cable complete all as specified and directed . |
| 139 | M&L in repairs for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as an earth continuity conductor complete all as specified and directed. |
| 140 | S & F of LED solar street light fitting 36 wattwith electric back up 8 to 10 hrs & including galvanised steel pole in built,solar panel, Lithium ion battery, PVC battery box, Charger controller with dusk down sensor, PVC wireetc including required earth work & PCC work & monkey protectioncomplete all as specified and directed. |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail