|
| 1 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm nut not exc 4 Sqm each, complete all as specified and directed. |
| 3 | S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete, quality conforming grade Fe-290 (Gde E 165), complete all as specified and directed. |
| 4 | S&F mild steel work for hold fast and similar small articles conforming to grade Fe-290 (Gde E 165) including MS screws, bolts, including tarring with a coat of tar and sanding, complete all as specified and directed. |
| 5 | M&L for providing PCC 1:3:6 type C-1 (using 20mm graded aggregate) for embedding hold fasts including necessary form work etc., complete all as specified and directed. |
| 6 | Supply & fix Glazed or skeleton factory made door shutter, 35mm thick of second class hard wood (hollock), open rebated and prepared to receive glass, gauge ( divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers) with plain, chamfered or rounded, mitred beads for glass etc, size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a), complete all as specified & directed. |
| 7 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 8 | S&F 150mm long alluminiumhandles, cast type, anodized and fixed, complete all as specified and directed. |
| 9 | S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 10 | S&F Butt hinges, medium weight, cold rolled, mild steel, and fixed with screw/ welding (Size of hinges in 100 mm), complete all as specified and directed. |
| 11 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 150 mm, complete all as specified and directed. |
| 12 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wooden surfaces, complete all as specified and directed. |
| 13 | M&L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 14 | Demolition of brick work or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles, complete all as specified and directed. |
| 15 | M&L for brick work with kiln burnt sub class \"B\" bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6, complete all as specified and directed. |
| 16 | Taking down cement or cemant lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 17 | M&L for 15mm thick plastering in CM 1:6 on fair faces of brick walls or concrete surfaces & finishing the surfaces even & smooth without using extra cement, complete all as specified and directed. |
| 18 | M&L for 15mm thick plastering in CM 1:4 on fair faces of brick walls or concrete surfaces & finishing the surfaces even & smooth without using extra cement, complete all as specified and directed. |
| 19 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed. |
| 20 | Preparingnewly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting, complete all as specified and directed. |
| 21 | Dismantling stone slabs and tiles of any description or thickness in floors / dados, etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 22 | S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed. |
| 23 | Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 176 of SSR 2020 (Part-II). |
| 24 | S & F factory made steel windows with side hung shutters using steel section with glazing bars including box type hinge, 01 \"Z\" section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leafdovetailed or welded complete all as specified and directed. |
| 25 | S & F factory made steel windows with side hung shutters with using \"Z\" steel section without glazing bars includingbox type hinges, 01 \"Z\" section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded, complete all as specified and directed. |
| 26 | S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: framed guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works conforming to Fe-290 Grade-E-165, complete all as specified and directed. |
| 27 | M&L 3mm thick ordinary quality sheet glass and glazing with oil putty in square not exc 0.5 Sqm in each pane, complete all as specified and directed. |
| 28 | S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type), 250 mm long and fixing clip of sheet cast or extruded section or fixing bolt cast aluminium alloy and fixed complete all as specified and as directed. |
| 29 | M&L for glazed ceramic coloured tiles of size 300x200x7mm thick fixed over and including 10mm thick rendering in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and drected. |
| 30 | M&L for non skid ceramic coloured tiles (squre/rectangular) area of each tiles exc 0.06 sqm but n. exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 31 | S&F 2nd class hard wood (Sal) as in scantling clean sawn, timber framed and fixed, complete all as specified and directed. |
| 32 | M&L for 17 mm thick Medium Density Fibre Board(Pre Laminated) Both Side Laminated, fixed with screws to timber frame work, complete all as specified and directed. |
| 33 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm Width of flaps when open, complete all as specified and directed. |
| 34 | Cutting holes of Superficial area n exc 100 Sqcm into or through reinforced cement concrete slabs, chajjas, etc., reinforcement cut through wherever required, complete all as specified and directed. |
| 35 | Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as required for superficial area not exc 150 sqcm, complete all as specified and directed. |
| 36 | S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 290 Gde-E-165complete all as specified and directed. |
| 37 | M & L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and directed. |
| 38 | S&F 100mm long alluminiumhandles, cast type, anodized and fixed complete all as specified and directed. |
| 39 | S&F 50 mm long Magnetic catcher to kitchen cabinet complete all as specified and directed. (Make - Harrison/Godrej/Hettich) |
