Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-12-2023 | Other Corrigendum | Other | 22-12-2023 |
| 2 | 16-12-2023 | BOQ CORRIGENDUM | BOQ | 22-12-2023 |
| Sl. No. | Item Description |
| 1 | Supply & fixtwin outlet hydrant valve 100 mm having 63 mm outlet with lock pin wheel complete all as specified and directed. |
| 2 | Supply & fixhose Reel drum suitable for 30 mtrs X 20 mm dia rubber hose pipe complete all as specified and directed. |
| 3 | Supply and fix20 mm dia gun metal Shutoff nozzle confirming to IS 903. |
| 4 | Supply & fixRRL canvas fire hose 63mm bore 15 m long confirming to IS 636-1988 having male/female gun metal coupling both end complete all as specified and directed. |
| 5 | Supply and fix Gun Metal Nozzle 63 mm x 20 mm bore suitable for 63 mm dia canvas pipe complete all as specified and directed. |
| 6 | Supply and fix hose box of size 800mm x 600mm x 250 mm for keeping 2 Nos hose pipe of length 15 meter each, branch pipe.nozzle, coupling etc of MS sheet of Thickness 2.0 mm |
| 7 | S&F Booster pumps for 440 V, 3 Phase, 50 Hz Confirming to IS- 12469 :1988 With CI Casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50 Hz 30mhead, 450 LPM discharge connecting electrically including suitable capacity of MCB, Flow switchand wiring for pump sets, testing complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Supply, fixing and connecting water storage tank 5000 Litre capacity Rotational moulded (ISI Marked), 3 layered including connecting all inlet and outlet connection including PCC (1:2:4),type B1 100 mm thick bed block after disconnecting existing water tank 5000 ltr capacity and removing from site all as specified and as directed. |
| 9 | Supply & fixinggun metal Two way fire brigade inlet conection with adaptor ofsize 80 mm dia X 63 mm diacomplete all as specified and directed. |
| 10 | Supply and fix 100mm bore hand operated butterfly valve of pressure not less than 15 Kg / Sqcm with complete set |
| 11 | S & FNon return valve of 100 mm dia both end flanged PN 1.6 all as specifed and directed. |
| 12 | Supply and fixAirrelease valave 25 mm dia. |
| 13 | Supply and fixMS ERWflanged pipe 100mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer, heavy duty clamp. |
| 14 | Supply and Fixing, installation, testing & commissioning of micro processor based 2 wire fault tolerant loop, required loop networkable type 2 loop (each loop accessing maximum 99 detectors and 99 modules ) fire alarm/detection control panel. The panel shall be able to give location of all fire/fault conditions of addressable units via the address. The panel shall have rectifier, Loop cards, L C D unit to indicate Fire/Fault Signal with address. The panel shall have a built in power supply and battery charger along with maintenance freeSMF Lead acid batteries as per manufacturers design with battery charger complete as required and as per specifications duly approved by EN 54 complete including making connections all as specified and directed by Engineer-in-charge. Make : Morley-IAS by Honeywell model Name/Number DXc2/714-001-225 or Bosch model NO FPA-1000-V2/Schneider cat No FFSULH1002 Model No ESM, ULTIMA. |
| 15 | Supply,replacement, Installation,Testing & Commissioning of Addressable Type Manual Call Point ressetable type with Mounting Base as required conforming (UL\"s Latest Edition Approved and NFPA compliant / VDS or LPCB tested and EN54 compliant) complete all as specified and directed. |
| 16 | Supply and fixFire Alarm sounders / Sirens electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 meter with sound output variation of + 5 DB for 500 meter range |
| 17 | Supply & fixdetectors complying with & type certified to EN-45 addressable type multisensor detector with heat and smoke combination complete all as specified and directed . |
| 18 | Supply , laying and testingPVC insulated, PVC sheathed cable galvanised steel strip or wire armoured, electric control cables (Heavy duty with stranded copper conductor of size 1.5 sqmm, 4 core, 1100 volts grade with clamp. |
| 19 | Supply , laying and testingPVC insulated, PVC sheathed cable galvanised steel strip or wire armoured, electric control cables (Heavy duty with stranded copper conductor of size 4 sqmm, 3.5 core, 1100 volts grade including suitable size of MCB with clamp |
| 20 | Supply and Fixingofsteel water tubing, galvanised, Medium grade 40 mm with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wallincluding necessary & capacityin low rise buildings in short piece/length, includingbreaking the existing brick wall for replacement ofcorroded GI pipe in/on wall and making good the disturbed surfaces complete all as specified and directed by Engineer-in-charge.Note Work to be carried out in high rise buildings plain wall or in shafts or in terraces or inside the flats for cutting the existing GI pipe line and replace the same with new GI pipe with heavy duty clamp in short piece of full length complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply and fixgun metal gate valve 40 mmwith iron wheel head screwed both ends for iron pipe including fittings i.e. union, socket etc complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply and fix in ceiling automatic fire extingusher 5 kgs capacity modular type, Dry Chemical powder (DCP) based, ISO certified all as specified and directed by Engineer-in-Charge. |
| 23 | Excavation in trenches n.exc.1.5m wide and not exc 1.5 m in depth for foundations of walls for laying of cables etc and not exc 10 Sqm on plan andin any type of soil all complete.(Note : Rate includes removing of paver blocks carefully and stack properly for refixing after laying of cable) |
| 24 | Ditto as per item No 23 but depth exc 1.5m and not exc 3.0m all as specifid and directed. |
| 25 | M&L for plain cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in foundtions filling and mass concrete completed all as specified and directed. |
| 26 | M & L RCC M-30 design mix for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete |
| 27 | M & L RCC M-30 design Mix as in Columns, pillars, piers, posts and struts completed all as specired and directed. |
| 28 | M & L RCC M-30 forlintel beams, roof beams, cantilevers, bressummers, lintels over 1.5m span completed all as specified and directed. |
| 29 | M & L RCC M-30 design Mix as in Chajjas all as specifed and directed |
| 30 | M&L for TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with m.s wire annealed not less than 0.9mm dia all as specified and directed |
| 31 | M&L for TMT steel bars 5mm dia and over and upto and including 10mm dia as in spacers , stirrups and binderbinding with m.s wire annealed not less than 0.9mm dia complete all as specified and directed. |
| 32 | M & L Formwork to sides of footings and pedestals, plinth beams forroughfinished surfaces completed all as specified and directed |
| 33 | M & L Form work to sides of column square or rectangular in plan for rough finished surfaces of concrete complete all as specified and directed. |
| 34 | M & L Form work toside and soffits of Chajjas, troughs and similar items in cluding edeges completed all as specified and directed |
| 35 | M & L Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. |
| 36 | Returning, filling in trenches using excavated soil, spreading, levelling, watering and well ramming in layers not exc.25cm |
| 37 | Removing excavated soil and demolised material exc 5 Km but n.exc 10 Km out side MoD land complete all as specified and directed |
| 38 | M & L Brick work with sub class \"B\" bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as directed by EIC. |
| 39 | M & L Cement Concrete type D2 (1:4:8) (Using 40 mm graded stone aggregate) in foundation filling for floor sub base |
| 40 | M&L for digital coloured virified Ceramic tiles light shade 10 mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or beddingin cement mortar 1:6 etc completeall as directed . |
| 41 | Material and labour for rendering 10mm thick in cement mortar 1 : 4 on backing coat of wall tiles etc complete all as specified and directed by Engr - in - Charge |
| 42 | M & L for 350x450x7 to 8 mm thick glazed ceramic tiles digital type on vertical surfaces such as skirting, dados and risers to step set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 43 | M&L plastering20mm thick in CM 1:4 on brick or concrete surfaces on external surface of walls in two coats(15mm thick backing coat and 5mm thick setting coat) mixed with water proofing compound finished fair & even without using extra cement. |
| 44 | M & L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. |
| 45 | M & LRendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified. |
| 46 | M & L Prepration of new plastered surfaces of walls, pillars, cornices and applying two coats oil bound distemper over a coat of primer including prepration of surfacecomplete all as specified and direceted. |
| 47 | M & LPrepration of new plastered surfaces of walls, pillars, cornices and applying two coats of oil bound distemper over 3mm thick wall care putty overa coat of primer including prepration of surfacecomplete all as specified and direceted. |
| 48 | M&Lfor preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceilingall as specified. |
| 49 | M&L for preparingnew plastered surfaces ofwall and applying two coats of Acrylic base paint exterior grade (100% Acrylic)over one coat of primer complete all as specified and directed. |
| 50 | M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium sliding window 18 to 20 mm thick over 20 mmthick screed bed in cement mortar 1:3 complete all as specified. |
| 51 | M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick over 15 mm thick rendering in CM 1:3 complete all as specified and directed. |
| 52 | S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note:Minimum 25 micron anodisation for all aluminium sections) |
| 53 | M&L powder coated aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (DG-102 (80 X 66 mm aperture) all complete. |
| 54 | S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete. |
| 55 | S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to Aluminium doors,windows shutter aluminium wire staples complete all as specified and directed. |
| 56 | S & F12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape,drilling holes required complete all as specified and directed EIC. |
| 57 | S&FStainless Steel curtain rod 25mm dia fixed to brackets complete all as specified and directed |
| 58 | S&F stainless steel fancy type decorated domes and bracket fixed to both ends of 25mm dia curtain rod complete all as specified and directed |
| 59 | M & L for Reinforced Concrete pipes, 150 mm dia conforming to class NP2,laid in trenches and jointed with collars as specified. |
| 60 | M & L Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 150mm dia pipe complete all as secified and directed |
| 61 | Supply and fix,10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white,with inlet, ball valve float and handle including brackets complete all as specified and directed. |
| 62 | S&F towel ring PTMT all as specified and directed. |
| 63 | S & F for grating doom 100 mm dia of PTMT (Minimum weight 25 gms) |
| 64 | Supply and fix32 mm dia PVC waste pipe all as specified and directed. |
| 65 | Supply and fix15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 66 | M & L for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed |
| 67 | S & F 32 mm dia bottle trap PTMT having minium water seal 25 mm (Minium wt 260 gram) all as specifiedand directed |
| 68 | S & F 75 mm dia PVC (SWR) floor trap plain, with grating including jointing with solvent cement all as specified and directed |
| 69 | S&F for 600mm x 450 mm bevelled edge mirror of selected uality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium lated brass screws andcup washers all as specified and directed |
| 70 | S & F for 110 mm Bore PVC ( SWR) Pipes single socketed in any lenth with rubber ring joints fixed to walls. |
| 71 | S & F for 75 mm Bore PVC ( SWR) Pipes single socketed in any lenth with rubber ring joints fixed to walls. |
| 72 | S&FPVC (SWR) bends any radius 110 mm bore. |
| 73 | S&FPVC (SWR) bends any radius 75 mm bore. |
| 74 | M & L for cast iron nahani trap 125/110 mm setting and jointing with solvent cement completae all as specified and directed |
| 75 | S & F 100 mm dia slotted vent cowlcomplete all as specified and directed |
| 76 | S & F 100 mm dia cone cap cowlcomplete all as specified and directed |
| 77 | S&F fancy type cromium plated stop valves of 15mm bore, with cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed cmplete all as specified and directed. |
| 78 | S&F 15mm bore dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed cmplete all as specified and directed. |
| 79 | S&F aluminiumdoor closer hydraulically regulated suitable for door shutters of 851 to 1000 mm in width complete all as specified and directed |
| 80 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed |
| 81 | M&L for granite (of any type) 20mm thickthe machine cut , bedded and jointed with grey cement slurry and pigment to match shade of granite stone including grinding and polishingcuttingpinning complete.over 20mm thick screed bed cement mortar 1:4 including cutting for wash basin /urinal partition etc completeall as specified & directed |
| 82 | Supply& Fixing of18 mm thick RajshriCeluka ply of Plain color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. (Make- Rajshri Plastiwood). |
| 83 | Supply& Fixing of18 mm thick Rajshri Celuka ply of one side Prelam/Rigidlam and other side plain white colourto make kitchen cabinet Shutter/ drawerFront shutters in double panel complete as per specifications and as directed by the engineer - in - charge. (Make- Rajshri Plastiwood) |
| 84 | Supply& Fixing ofauto closing hingesopenable at 0 degree for kitchen cabinet shutters Make; ( Hettich,Ebco, Prime) |
| 85 | Supply& Fixing ofstainless steel handles 100 mm size for kitchen cabinet shutters, , Make;( Hettich, Ebco, Prime) |
| 86 | M&L broken stone or boulders of hard core n exc 63 mm deposited, spreaded and levelled in layers n exc 15 cm thick, watered and rammed to a true surface. |
| 87 | M&L 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded stone aggegate as in sub base complete all as specified and directed |
| 88 | M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in subbase to floors all as specified and directed. |
| 89 | S & F for brass 4 levers mortice lock, vertical type, size 100 mm complete all as specified and directed. |
| 90 | S & F 15 mm bore pillar tap, fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 91 | S & F Chromium plated shower roses withor without swivel joints, any size, including fixing to steel pipe or union fixed complete all as specified and directed.Make : Jaquar/cera. |
| 92 | S & F Chromium plated shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of chromium platedincluding fixing to steel pipe or union fixed complete all as specified and directed. Make : Jaquar/cera. |
| 93 | S & F Cromium plated angle valves of 15mm bore, with adjustable wall flangefixed complete all as specified and directed. Make Jaquar/cera. |
| 94 | S & F Towel rail 600 mm long of chrome plated fixed with and including chromium plated brass screws and cleats fixed complete all as specified and directed. |
| 95 | S & F Looking mirror 5.5 mm thick mounted on 5mm thick PVC Sheet including power coated aluminium beading of approved pattern fixed complete all as specified and directed. |
| 96 | S & F 15mm bore centre hole basin mixer with round spout with 450mm long copper pipe and brassnut with out pop up fixed comlete all as specified and directed Make : Jauar cat part No LYR-38001B or euivalent in cera |
| 97 | S & F Towel rack 600mm long with lower hangers including fixing arrangement fixed complete all as specified and directed Make : Jauar cat part No ACN-1181N or equivalent in cera. |
| 98 | S & F Long body Bib Cock with wall flange fixed complete all as specified. Make : Jaquar cat part No ARI-39037 or equivalent in cera. |
| 99 | S & F 450 mm long branded hose with M10X1 Nipple 15 mm Nut, O ring and rubber washer (Suitable for basin mixers) Make Jaquar Cat No ALD 805B. Suitable for gysers. |
| 100 | S & F 450 mm long branded hose with M10X1 Nipple 15 mm Nut, O ring and rubber washer (Suitable for basin mixers) fixedcomplete all as specified and directed Make Jaquar Cat No ALD 8025B or euivalent in cera |
| 101 | S & F Hand shower (Health faucet) with 8mm dia 1mtr long flexible tube and wall hook fixedcomplete all as specified and directed. Make Jaquar cat part No ALD-573 or equivalent in cera |
| 102 | S & F Water closet one piece wall hung EWC with soft close seat cover and twin flush fitting ( as approved by Engr-in-charge) fixed complete all as specified and directed Make CERA, CROMA Size 550x365x355mm cat part No S1043113P Trap (Ivory Colour) or equivalent in Jaquar/Cera. |
| 103 | S & F Hand basin counter/cabinet type complete fitting as per sample approved by Engr-in-charge fixed complete all as specified and directed.Make : Cera 1005 x 455 mm x 600 mm Cat Part No S2030119 celene wash basin or equivalent in Jaquar/Cera |
| 104 | S & FCP waste coupling 32mm bore with cup and washers fixedcomplete all as specified and directed. Make : jaquar cat part No ALD-709L130 or euivalent in Jaquar/cera |
| 105 | S & FSoap dish holder fixed complete all as specified and directed Make jauar cat part No ACN-1131N or euivalent in Jaquar/cera |
| 106 | S & F Tumblar holder fixed complete all as specified and directed. Make :Jaquar cat part No ACN -1141N or equivalent in Jaquar/cera. |
| 107 | S & F Toilet paper holder with flap fixedcomplete all as specified. Make : Jaquar cat Part No ACN-1153N or equivalent in Jaquar/cera. |
| 108 | S & F Glass shelf 600mm long fixed complete all as specified and directed Make : Jauar cat part No ACN-1171N or equivalent in Jaquar/cera. |
| 109 | S & F Corner glass shelf with bracket fixec complete all as specified and directed. Make : Jaquar cat part No ACN-1173 or euivalent in Jaquar/cera. |
| 110 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed by Engg-In- Charge. |
| 111 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately) |
| 112 | S & F in repairs Vitreous China Urinal, full stall type, white (including, push cock, flushing cistern, flush pipe and waste pipe)including connections to flushing pipe and outgoing pipes. |
| 113 | S & F stainless steel butt hinges100mm size, medium weight of ISI marked |
| 114 | S&F aluminium anodised sliding door bolt with hasp and staple(bolt type) andfixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, length of bolt 300mm complete as specified |
| 115 | S&F 150mm long aluminium anodised tower bolt of extruded section. |
| 116 | S&F 150mm size extruded aluminium anodised alloy handles fabricated type |
| 117 | S & F Bib cock with wall flange 15mm bore with wall flange Make Jaquar/cera. |
| 118 | Demoliton of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge |
| 119 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggegate as in floor, finished the surface even and smooth without using extra cement and spike rolling to surfaces or making impressions of expandedmetal whilst the concrete is green all as directed . |
| 120 | M&L for sand cushioning under interlocking paver blocks watering and compactcomplete all as specified & directed . |
| 121 | M&L Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 grade complete all as specified and directed |
| 122 | M&L for 20 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed |
| 123 | M&L for digital type floor tiles of size 300x300x10 to 12 mm thick set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed. Colour, size and pattern shall be approved by GE. |
| 124 | M&L for prepolished coloured chequerd floor tiles of size 300x300x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed. Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paidseparately) |
| 125 | Dismantling posts or struts (wood,steel or RCC) any section,in natural ground including taking out embedded portion and making good distrubed ground complete all as specified and directed |
| 126 | Dismantling of fencing wire mesh any type |
| 127 | S&F mild steel work as in angle iron post and struts in fencing including welding, cutting tops to shape as directed,drilling holes,notching for wire etc flat iron fillets ( for securing wire mesh etc) including all necessary drilling,bolting or riveting and welding to existing boundary wall fencing post and other similar location etc complete all as specified and directed |
| 128 | Demolition of brick workbuilt in cement mortar including all quoins,arches pillars etc all as specified and directed |
| 129 | Providing PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation complete all as specified and directed. |
| 130 | Material and labourfor extra forming fair finished drain or channel inner girth in cement concrete using extra cement including forms, moulds, mitred/stopper ends etc complete all as specified and directed. |
| 131 | Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed . |
| 132 | M& L 15mm thick rendering in cement mortar(1:4) on fair face of brick work or concrte surfaces finished surface even and smooth with using extra cement complete all as specified and as directed by EIC. |
| 133 | M& L Preparation of new plastered surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat priming on plaster surfaces complete all as specified and directed. |
| 134 | S&F including fabricationframed work in MSiron such as grills, gratings gate fencing , etc with end of bars shouldered and/ or riveted or bolted with nuts and bolts framework confirming to Fe.290. Gde-E-165 complete all as specified and directed. |
| 135 | M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfacesincluding prepration of surface of any description over 10 cm width or girth not otherwiseall as specified and directed |
| 136 | M&L for Cement concrete type C-2 1:3:6 ( 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directd. |
| 137 | M&L fabrication of mild steel work as in posts,purlins,crane gantires, rafter ,rails,wind tie nut & bolt etc and fasteningsetc and heavy brackets framing (MS tube, beam,tee,angle,channels,flat section etc and other sections) including distance pieces,cleats etc complete all as specified and directed . |
| 138 | Supply and Fixing in position Pre painted manglore pattern galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as in roof covering/claddig to wall, fixed with self tapping screws, having tensile strength of 550 Mpa yield strength and zinc (galvanised) + Aluminium combined coating of 150 GSM/PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to 7 micron Epoxy primer fixes.RMR 1040 profile width 1125mmNote : The sheet shall be fixed to MS angle with or J hook with incl. wind ties etc & wind ties shall be measured seperately all as specified and directed. |
| 139 | Providing and fixing 12mm thick GRG false ceiling at all heights with GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture design and patterns having moisture content less that 2% humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225 : 1987, Noncombustible as per BS 476 (Part 4) - 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T - Grid of hot dippend galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross- T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) ie 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws, the work shall be carried out as per specifications, drawing and as per directions of the Engineer -in- Charge. |
| 140 | Providing and fixing in position wall paneling at all heights with GRG (Glass Gibre Reinforced Gypsum) panels/tiles of size size 595 x 595 mm of approved texture design and patterns having moisture content less that 2% humidity resistance of 99%, NRC 0.70 to 0.85 as per IS 8225 : 1987, Non Combustible as per BS 476 (Part 4) - 1970 and light reflectance of 75% to 85% (minimum) comprising of a frame made frm especially fabricated galvanized mild steel sheet 0.50mm thick pressed section (galvanizing @ 120 grams per sqm including both sides) i.e vertical studs of size 48 x 34 x 36 mm are placed at 600 mm centre to centre in a floor and ceiling channel section of size 50 x 32 mm fixed to the floor and soffit at 600 mm centres using 12 mm dia 50mm long wedge ype expanded zinc alloy dash fastener with 10 mm bolt.This same channel is then to be fixed in horizontal direction at 600mm glass wool of 50mm thickness is then to be inserted in the slots and finally GRG (Glass Reinforced Gypsum) non-combustible panels/tiles are to be screw fixed with self-Tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels.The joints between the panels are to be duly jointed and finished using recommended jointing compound and fiber joint tape roll 50mm wide (90 meter) roll and two coats of primer suitable for paneling as per manufacturesspecification as per direction of Engineer-in- chrge all complete |
| 141 | M&L for Soil-glazed stonewaredrain pipes 150 mm dia laid in trenches and jointed complete all as specified and directed. |
| 142 | S&F forbends and taper bends, any radius for Soil-glaged stoneware pipes for 150 mm dia pipes complete all as specified and directed. |
| 143 | M & L Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 150mm dia SGSW pipe complete all as secified and directed |
| 144 | S & F grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 145 | M & L jointing only 100mm bore cast iron pipes and fittings, in repairs, with cement joints. |
| 146 | M & L Dura stone (heavy duty) coloured, white printed tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm and 7-8mm thick as in floors etc set and jointed in neat cement slurry pointed in white or coloured cement to match complete including 15 mm thick screed bed in cm 1:4all as specified and directed. |
| 147 | M&L full body porselano glazed vitrified tiles/slabsgrandeur 14mm to 16mm thick 2400 X 800 mm in flooring and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 20 mm screed bed in cm 1:6 all as specified. Make : Johnson/equilant |
| 148 | Supply & fixing LED flood light fittings comprising of epoxy powder coatedpressure die cast aluminium housing, enclosed with glass cover in frame (with total lumen output not less than 30000 lumens and suitable wattage for efficiency not less than 120 lumens/Watt) min wattage 250 watt,with ingress protection IP66 and 4kV inbuilt and 10kV external surge protecton etc incl connecting light fitting with three core copper wire from junction box and neccessary clamping etc complete and testing on completion all as specified and as directed. |
| 149 | Supply & fixing LED flood light fittings comprising of epoxy powder coatedpressure die cast aluminium housing, enclosed with glass cover in frame (with total lumen output not less than 21600 lumens and suitable wattage for efficiency not less than 120 lumens/Watt) min wattage 180 watt,with ingress protection IP66 and 4kV inbuilt and 10kV external surge protecton etc incl connecting light fitting with three core copper wire from junction box and neccessary clamping etc complete and testing on completion all as specified and as directed. |
| 150 | Supply, install, testing and commissioning of 16 mtr High Mast, polygonal, continues tapered, and flange mounted type single hot dip galvanized, no circumferential weld and suitable for wind velocity as per IS 875 part 3 fabricated out of special steel plates as per BSEN-10025, grd mild steel, the mast shaft shall be supplied in two sections top dia : 150mm, bottom dia : 360mm approx, top section length 8.25 mtr, bottom section length 8.25 mtr and shall be stress fitted at site mast door opening size 1200mmx3000mm along with supply of accessories for 16 mtr high mast which includes head frame, lighting finial, stainless steel wire rope, compensating disc for three wire rope system, double drum winch with capacity of 750 kg, power trailing cable integral power tool, twin type LED aviation obstructionlight, control panel housing comprising of suitable timer-contactor circuit for automatic ON/OFF of high mast lights galvanised lantern carriage suitable for mounting 06 Nos 250 watt LED flood light fittings symmlevel adjuster of size 85 x 25 x 2 mm Galvanised iron perimeter wall angle of size 24x 24 x 0.40 mm of length 3000 mm |
| 151 | (a) Twin type LED Aviation Lights for each high mast tower as per DGCA guidelines. |
| 152 | (b) Feeder Piller distribution box for each high mast tower( as per OEM specification) |
| 153 | (c )Winch motor for high mast tower ( as per OEM specification) |
| 154 | (d) Flaxible trailing cables for LED flood lights, LED aviation lights and earthing. |
| 155 | (e) Cable glands and plugs for unused entries. |
| 156 | (f) Supply of foundation bolts manufactured from special steel alongwith nuts, washers, anchor plates and templates etc. for HM mentioned. |
| 157 | (g) The lantern carriage should be of raising and lowering type and for this purpose a THREE WIRE SUSPENSION system of stainless steel wire rope of adequate size along with a double drum winch to be provided for most optimum balancing of the lantern carriage. Tower tool should be integrated. |
| 158 | (h)COMPENSATING DISC and SAFETY WIRES to be provided for maximum safety and flexibility. |
| 159 | (j) The self lubricating WINCH gear assembly should be made of phosphor bronze. |
| 160 | (k)RCC foundation as per manufacturer\"s reccomendations. |
| 161 | (l)The power tool should be built in type and lightening arrester spike type. |
| 162 | Note :- Rate deemed to be inclusive of providing RCC foundation alongwith granite work at plateform according to site conditions and wind pressure, earth work, excavations. (ii) The contractor has to submit the specification of High Mast Structure and drawing of foundation for approval of accepting officer. |
| 163 | M&L for XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 300 sq mm 3.5 core confirming to IS 7098 (Part-I):1988 laid on trenches/wall/floor or passing through cable duct/trunking and suitable size of lugs, connection with existing LT panels and testing on completion complete all as specified. |
| 164 | Same all as per Item No 151.00 above but size 185 Sqmm, 3.5 core |
| 165 | Same all as per Item No 151.00 above but size 50 Sqmm, 3.5 core |
| 166 | Same all as per Item No 151.00 above but size 16 Sqmm, 4.0 core |
| 167 | Cutting existing road surface or hard standing, bituminous topping 15 cm but n exc 30cm girth for laying of pipes/ cables and making good distrubed surface to match with existing complete. |
| 168 | M&L for GI pipe ,light grade 50mm dia for road crossing of cable for cable protection or above ground surface including taking out old one all as specified and directed. |
| 169 | M&L for GI pipe, light grade 100mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. |
| 170 | M & L for 60 mm thick coloured interlocking paver tiles/ blocks, lacquer finish of existing size and existing type and including laying over 50 mm thick sand bed compacted complete as specified and directed. |
| 171 | M&L for High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 40 mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. |
| 172 | M&L for High density poly-ethylene pipes (HDPE) of pressure 4 kgf/cm2 pipe, 100/110mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. |
| 173 | M & L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, passing through PVC casing caping including accessories and one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly as directed by Engineer-in-Charge for the following:-NOTE :Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm. |
| 174 | One light/ fan/ E\"fan point controlled by one way switch |
| 175 | One 2/3 pin socket outlet, 5 Amps on the same board with other switches. |
| 176 | One 2/3 pin socket outlet, 5 Amps, independent |
| 177 | All as per item No 161.00 above but with 2.5 sqmm cable for one 2/3 pin 15 Amps socket out let controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 178 | All as per item No 161.00 above but with 4.0 sqmm cable to connecion of AC plug and socket box enclouser. NOTE :Separate Circuit conductor from MCB DB to Plug socket box to be drawn for each points control by 25 Amp MCB and length of circuit as per site requirement and as directed. |
| 179 | S & F modular switch piano, 1 module, single pole one way 6 Amp. |
| 180 | S & F modular switch piano, 1 module, single pole one way 16 Amp. |
| 181 | S & F modular socket 2/3 pin, 2 module, 6A, ISI marked, 230 volts. |
| 182 | S & F modular socket6/16A, 6 pin, 2 module, ISI marked, 230 Volts. |
| 183 | S & Fsheet metal enclosures single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB single pole 20 Amp 240V. |
| 184 | S & F modular stepped type (5 step) electronic fan regulator, 2 module, 230 volts ISI marked and connecting up complete all as specified and directed by Engineer-in-Charge. |
| 185 | S & F ceiling rose surface bakelite 65x50 mm with 3 terminals. |
| 186 | S & F modular metalic flush box of 8/6 module for mounting of modular switches including blank plate for blank module complete all as specified and directed by Engineer-in-Charge. |
| 187 | All as per Item No- 174.00 above but of modular metal flush box, 3 module. |
| 188 | S&F modular white cover plate with frame, 8 module. |
| 189 | S&F modular white cover plate with frame, 3 module. |
| 190 | Supply and fixSlim LED intigrated batten of 20 Watt 4ft coolday light with powder coated CRCA decorative patti prewired complete with two Nos of PVC box of size 75x75x20 mm for mounting light fittings complete. |
| 191 | Supply and fix 2\" x 2\" LED luminaires CRCA housing with efficient optics ensuring perfectly uniform illumination, with polymer diffuser complete with all accessories suitable for recessed mounting 36 Watt, 240V, CDL/NW. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings as specified and directed by Engr-in-Charge. |
| 192 | Supply and fix ceiling fan 230V, 50 Hz, AC, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified. |
| 193 | Supply and fix exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 300mm sweep having power input 70W speed 1440RPM, with protective bird guard and louvers including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. |
| 194 | Supply & fixing LED street light fittings comprising of epoxy powder coated pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 (with total lumen output not less than 5400 lumens and suitable wattage for efficiency not less than 120 lumens/Watt)min wattage 45 watt, with ingress protection IP66 and 4kV inbuilt and 10kV external surge protecton etc incl connecting light fitting with three core copper wirefrom connector or ceiling rose and necessary clamps etc complete and testing on completion all as specified and as directed. Make:Bajaj/Havells/Crompton/Wipro |
| 195 | S&F street light bracket bend to shape made as required of 32 mm dia, length 1.5 mtr GI pipe light grade fixed to pole/ Wall including M&L for fixing with the help of flat iron clampwith the help of nuts and bolts for fixing of street light fitting on the wall surfaces complete all as specified and as directed. |
| 196 | Supply, fixing and testing electric cable with copper conductor, 1100 volts grade of size 2.5 sqmm 3 corepassing through PVC conduits of size not lessthan 20mm dia, fixed on wall surfaces by proper clamping complete including connecting properly by means of thimbles/bottle lugs complete all as specified and directed. Make: Polycab/Havells/Plaza |
| 197 | S&F time switch distribution box made out of MS sheet powder coated of suitable size with front opening door system having one number astronomical time switch 230V AC, oneselector switch for auto/manual operation and one 3 pole Power contactor heavy duty 32 amps rating, one MCB TPN 32 Amps, connection copper busbarand necessaty internal connection/ wiring with adequate size copper wire all as directed. |
| 198 | S & F weather/water proof junction box of size not less than 4x4 inch with connector encloser, 3 terminal/ PVC/ polycarbonate, isolated body fixed on external wall surfaces comlpete all as specified and directed. |
| 199 | Supply and fixing of MCCB DB VTPN 8 way as per IEC 61439-3 Suitable for Flush /Surface mounting with 250 A Copper Busbar for each phase with 2 Neutral bar, 2 Earthbar and Cable ties for Cable management fully insulated busbar & shrouded Neutral bars improved Pan assembly for ease of installation prefitted masking sheet reversible metalic door for IP 43 & IP 54 DB\"s with provision for 125/160 Amp 4pole MCCB as incomer and SP/TP MCB\"s as outgoing complele all as specified and directed. Make : Legrand/Siemens/Schneider/ABB |
| 200 | S & F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 25 KA complete with connection testing and commissioning complete all as specified. |
| 201 | S & F miniature circuit breaker (MCB) TP, 63 Amp, 415V, 10KA \"B\" curvein the DB complete with connection testing and commissioning complete all as specified. |
| 202 | S & F miniature circuit breaker (MCB) SP, 5 to 32 Amp, 240V, 10KA \"B\" curvein the DB complete with connection testing and commissioning complete all as specified. |
| 203 | M&L for feeder pillar box (size 1.0 x 0.8 x 0.3 Mtr) factory made pedestal cubical double door outdoor type, CPRI approved, modular construction fabricated out of 3.15 mm thick MS sheet, epoxy powder coated to give superior finish, totally enclosed, dust and vermin proofwith locking arrangement (compartment wise) front & back side opening system including rain shed 15 cm all around, platform mounted having minimun clearance of 450 mm above ground level suitable for 415 Volts 3 phase 4 wire system 50 Hz supply, having ETP grade copper busbar strip (three phase & neutral) duly tapped in colour coded FRP sleeves install on porcelain /epoxy insulator, floor mounted type based on angle iron frame and legs 40x40x5 mm thick and having locking arrangement with 50 mm lock make Navtal or Harrison with three keys and including grouting of panel with necessary PCC work complete all as specified. The scope of work including provision of housing the following accessories:-Make of Panel - L&T/Legrand India Pvt Ltd/StandardIncoming:(i) MCCB 160 Amp 4 pole 36 KA 415 V with thermal magnetic release, Ics=100% Icu. - 01 No. Make: Schneider, L&T or Legrand.(ii) Indicating lamp LED type with holder key flush mounted, Red, Yellow, blue with toggle switch - 1 set ( set of three) asin incoming phases. |
| 204 | Outgoing:(i) MCB TP 63A, 10kA, 415V. - 01 No. Make: Schneider, L&T or Legrand.(ii) Analog time switch 3P Module, 24 hours program, programmable every 15 min., backup of 100 hours, current capacity 16A for ON/OFF controlling of security lights - 01 No. Make: Schneider, L&T or Legrand.(iii) Power contactor 3 pole AC, with 240 volt coil, 32 Amp ratingconforms to IS / IEC 60947-4-1 for ON/OFF controlling of security lights - 01 No. Make: Schneider, L&T or Legrand.(iv) Tinned copper bus bar strips made of copper of size 40x5mm having no.s of hole for connecting of outgoing cables - 04 Nos Note : Before fabrication of panel the Contractor has to take approved from accepting officer on drawing. |
| 205 | M&L for supply installation and testing of LT panel board factory made pedestal cubical double door outdoor type, CPRI approved manufacturer, modular construction fabricated out of 3.15 mm thick MS sheet, epoxy powder coated to give superior finish, totally enclosed, dust and vermin proofwith locking arrangement (compartment wise) front & back side opening system including air louvers at both side, rain shed 15 cm all around, overall size of each incoming & out going modules should not be less than (350mm x300mm x400mm ), platform mounted having minimun clearance of 450 mm above ground level suitable for 415 Volts 3 phase 4 wire system 50 Hz supply, having ETP grade copper busbar strip (three phase & neutral) duly tapped in colour coded FRP sleeves install on porcelain /epoxy insulator, floor mounted type based on angle iron frame and legs 50x50x5 mm thick, front and rear opening with double shutter and having locking arrangement with 50 mm lock make Navtal or Harrison with three keys and including grouting of panel with necessary PCC work complete all as specified. The scope of work including provision of housing the following accessories:- |
| 206 | Incoming: -(i)MCCB 250Amp 4 pole 36 KA 415V with thermal magnetic release, Ics=100% Icu.- 01No. (ii) On Load Changeover switch 250 Amp, 415V, 4 polewith open execution with front handle - 01 No. (iii) Digital type Voltmeter ( 0-500 Volts), 3 phase, 4 digit, high resolution, LED type with onsite programmability- 01 Nos. Make: Securemeters, Reshab orL&T.(iv) Digital type Ampermeter ( 0-300 Amps) three phase with copper wound CT coil assy of suitable ratio & size Class I accuracy, 0.5 VA burden & onsite programmability - 01 Nos.(v) Indicating lamp LED type with holder key flush mounted, Red, Yellow, blue with toggle switch - 1 set (set of three) asin incoming phases.(vi) Tinned copper bus bar strips made of copper of size 40x6mm suitable length-04 Nos Outgoing: - (i) MCCB 160 Amp 4 pole 36 KA 415 V with thermal magnetic release, Ics=100% Icu. - 02 No.(ii) MCCB 125 Amp 4 pole 25 KA 415 V with thermal magnetic release, Ics=100% Icu. - 01 No.(iii) MCCB 63 Amp 4 pole 25 KA 415 V with thermal magnetic release, Ics=100% Icu. - 01 No. (iv) Power contactor 4 pole 40 Amp, 415 V - 02 No. Make: Schneider, L&T or Legrand.(v) Analog time switch 3 module - 02 No. Make: Schneider, L&T or Legrand.(vi) All outgoing MCCB shall be connected through spreader and copper busbar not less than 5 mm thick strip. Note : Before fabrication of panel the contractor has to take approval from accepting officer on drawing. |
| 207 | Supply and erect steel tubular swaged poles complete with MS base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-79 (16.0 metres long)length of sections shall be 7 mtr(219.1 x 5.60 mm), 4.5 mtr (193.7 x 4.85 mm) and 4.5 mtr(165.1 x 4.50 mm) of bottom, medium and top respectively and weight of pole not less than 405 Kgs confirming to IS-2713 (Part I& II) of 1980 all as specified including two coats of black bituminous paint throughout internally and externally up to planting depth and applying two coats of aluminium paint over one coat of red oxide primer (externally) and embedded in ground by foundation and copping of suitable grade PCC. Certain modification work shall be carried out at site in steel pole by welding/drilling holes for fixing/mounting of iron structure for climbing post and light fittings complete all as specified and as directed by Engineer- in-Charge. Note :- Strcuctural iron itms, earth work and PCC for foundatioin shall be measured and paid separately. |
| 208 | Supply and erect steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long)length of sections shall be 5 mtr(165.1 x 4.50 mm), 1.75 mtr (139.7 x 4.50 mm) and 1.75 mtr(114.3 x 3.65 mm) of bottom, medium and top respectively and weight of pole not less than 141 Kgs confirming to IS-2713 (Part I II & II) of 1980 all as specified including two coats of black bituminous paint throughout internally and externally up to planting depth and applying two coats of aluminum paint over one coat of red oxide primer (externally)and embedded in ground by foundation and copping of suitable grade PCC complete all as specified and as directed by Engineer- in-Charge. Note :- Earth work and PCC for foundatioin shall be measured and paid separately. |
| 209 | S&F street light bracket bend to shape and made as required of 50 mm dia, length 1.2 mtr GI pipe light grade fixed to pole and M&L for fixing with the help oftwo set of flat iron clamp, nuts, bolts and washer for fixing of street light fitting on the steel tubular pole complete all as specified and as directed. |
| 210 | M&L for pole mounted thermoplastic cable junction box for steet light with IP-66/67 protection, halogen free and weather proof with metric knockouts for cable entry for outdoor installation of size 155mm x 210mm x 92mm with front door opening system including terminals for one incoming and two outgoing cables of size upto 16 sqmm 4 core, one MCB DP 6 Amp 240V AC with mounting clamp of flat iron, nut, bolt and washers complete all as specified and directed. |
| 211 | Supply & fixing LED street light fittings comprising of epoxy powder coated pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 (with total lumen output not less than 7200 lumens and suitable wattage for efficiency not less than 120 lumens/Watt)min wattage 60 watt, with ingress protection IP66 and 4kV inbuilt and 10kV external surge protecton etc incl connecting light fitting with three core copper wirefrom connector or ceiling rose and necessary clamps etc complete and testing on completion all as specified and as directed. Make:Bajaj/Havells/Crompton/Wipro |
| 212 | Supply & fixing LED flood light fittings comprising of epoxy powder coatedpressure die cast aluminium housing, enclosed with glass cover in frame (with total lumen output not less than 24000 lumens and suitable wattage for efficiency not less than 120 lumens/Watt) min wattage 200 watt,with ingress protection IP66 and 4kV inbuilt and 10kV external surge protecton etc incl connecting light fitting with three core copper wire from connecto and neccessary clamping etc complete and testing on completion all as specified and as directed. Make:Bajaj/Havells/Crompton/Wipro |
| 213 | Supply & fixing LED flood light fittings comprising of epoxy powder coatedpressure die cast aluminium housing, enclosed with glass cover in frame (with total lumen output not less than 48000 lumens and suitable wattage for efficiency not less than 120 lumens/Watt) min wattage 400 watt,with ingress protection IP66 and 4kV inbuilt and 10kV external surge protecton etc incl connecting light fitting with three core copper wire from connecto and neccessary clamping etc complete and testing on completion all as specified and as directed. Make:Bajaj/Havells/Crompton/Wipro |
| 214 | M & L for wiring for circuit/submain wiring alongwith earth wire of sizes 2x1.5 sq. mm for phase and neutral and 1x1.5 sq. mm as earth wire 1100 volts grade cable, FRLS, passing through rigid non-metalic medium grade PVC conduit including accessories PVC insulated mulunsheathed single core multi stranded copper conductor complete all as specified. Note : One RM of 2x1.5 sqmm phase and nuetral wire, one RM of 1.5 Sqmm earth wire & one RM PVC conduit of suitable size shall be measured as one RM. |
| 215 | M&L for XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 16 sq mm 2.0 core confirming to IS 7098 (Part-I):1988 laid on trenches/wall/floor or passing through cable duct/trunking and suitable size of lugs, connection with existing LT panels and testing on completion complete all as specified. |
| 216 | All as per item No 203.00 above but of size 35 sq mm 3.5 core. |
| 217 | M&L for High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 50 mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. |
| 218 | M&L for Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint for climbing and light fitting post on steel tubular poles complete all as specified and as directed. |
| 219 | M&L for earthing complete with galvanized steel earth plate electrode (600x600x6) mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level connected to GI earth wire 4.0 mm by means of nut boltand washer made out of galvanized iron or steel connected to panel and RCC cover slab of size (450x450x60) mm with one handle made out of 8 mm dia round bar 20mm bore GI pipe medium grade forwateringfunnel wire mess and charcoal or coke of alternative layer, of 15 cm including necessaryearth work complete all as shown in electrical plate No.5 of SSR part-1 and testing complete all as specified and directed. |
| 220 | M&L for feeder pillar box (size 1.0 x 0.8 x 0.3 Mtr) factory made pedestal cubical double door outdoor type, CPRI approved, modular construction fabricated out of 3.15 mm thick MS sheet, epoxy powder coated to give superior finish, totally enclosed, dust and vermin proofwith locking arrangement (compartment wise) front & back side opening system including rain shed 15 cm all around, platform mounted having minimun clearance of 450 mm above ground level suitable for 415 Volts 3 phase 4 wire system 50 Hz supply, having ETP grade copper busbar strip (three phase & neutral) duly tapped in colour coded FRP sleeves install on porcelain /epoxy insulator, floor mounted type based on angle iron frame and legs 40x40x5 mm thick and having locking arrangement with 50 mm lock make Navtal or Harrison with three keys and including grouting of panel with necessary PCC work complete all as specified. The scope of work including provision of housing the following accessories:-Make of Panel - L&T/Legrand India Pvt Ltd/StandardIncoming:(i) MCCB 160 Amp 4 pole 36 KA 415 V with thermal magnetic release, Ics=100% Icu. - 01 No. Make: Schneider, L&T or Legrand.(ii) Indicating lamp LED type with holder key flush mounted, Red, Yellow, blue with toggle switch - 1 set ( set of three) asin incoming phases.Outgoing:(i) MCB TP 63A, 10kA, 415V. - 01 No. Make: Schneider, L&T or Legrand.(ii) Analog time switch 3P Module, 24 hours program, programmable every 15 min., backup of 100 hours, current capacity 16A for ON/OFF controlling of security lights - 01 No. Make: Schneider, L&T or Legrand.(iii) Power contactor 3 pole AC, with 240 volt coil, 32 Amp ratingconforms to IS / IEC 60947-4-1 for ON/OFF controlling of security lights - 01 No. Make: Schneider, L&T or Legrand.(iv) Tinned copper bus bar strips made of copper of size 40x5mm having no.s of hole for connecting of outgoing cables - 04 Nos |
| 221 | S&F Decorative LED post top lantern fittings in victorian design 20 Watt warm white made in pressure die cast aluminium housing and with polycarbonate/ Frosted Glass cover with protection for optical compartment, potted driver and surge protection 4 KV including LED luminaire complete all as specified and as directed. |
| 222 | Supply, laying and testing of XLPE armoured electric cable with copper conductor, 1100 volts grade of size 2.5 sqmm 3 core confirming to IS 7098 (Part-I):1988 laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles/bottle lugs and taking out old u/s damaged cables. |
| 223 | M&L for PVC conduit pipe 20mm bore, heavy mechenical stress for protection of electric cable laid under ground/wall surfaces by proper clamping complete all as directed. |
| 224 | S & F weather/water proof junction box of size not less than 4x4 inch with connector encloser, 3 terminal/ PVC/ polycarbonate, isolated body fixed on external wall surfaces comlpete all as specified and directed. |
| 225 | Supply, installation, commissioning of Water cooler fully stainless steel body, electric driven compressor 230V single phase, 50 Hz, having approx storage and nominal cooling capacity 150/150 Ltrs complete all as specified and as directed. |
| 226 | S & F water purifier (on line) with sediment filter, carbon block & UV lamp with 200/Lph, fixing water purifier on wall and connecting it with water cooler including all connecting accessories complete all as specified and as directed. |
| 227 | M&L for Provn of PCC base for installation of water cooler including provision of waste water drain out complete all as specified and as directed. |
| 228 | Cutting of existing 15mm dia concealed GI pipe/remove existing stop valve and Provn of 15mm dia new GI pipe and refixing the removed stop vavle on same place complete all as directed. |
| 229 | Chiseling the existing bricks/conc walls and S & F GI tubes 15 mm dia, medium grade with all fittings and make good the disturbed surface area as per existing colours complete all as specified. |
| 230 | S&F Gun-metal, globe orgatevalves for 15mm dia, with iron wheel head, screwed both endsfor iron pipeandfixed Stop valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as directed. |
| 231 | Supply, laying and testing of XLPE armoured electric cable confirming to IS 7098 (Part-I):1988 with copper conductor, 1100 volts grade of size 4 sqmm 3 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles/bottle lugs and taking out old u/s damaged cables. |
| 232 | M & L for wiring for circuit/submain wiring alongwith earth wire of sizes 2x2.5 sq. mm for phase and neutral and 1x2.5 sq. mm as earth wire 1100 volts grade cable, FRLS, passing through PVC casing caping including accessories PVC insulated mulunsheathed single core multi stranded copper conductor complete all as specified. Note : One RM of 2x2.5 sqmm phase and nuetral wire, one RM of 2.5 Sqmm earth wire & one RM PVC casing caping shall be measured as one RM. |
| 233 | Supply and fixing steel water tubing, galvanised, Medium grade with all fittings such as nipple,union, socket elbow, bends, fixed to wall including work to be done up to 15 th floor in high rise bldgs in short piece/length, including breaking the existing brick wall for replacement of corroded GI pipe in / on wall and making good the disturbed surfaces to match previous structure with complete all as specified and directed by Engineer-in-charge of following sizes :- |
| 234 | 15 mm bore |
| 235 | 25 mm bore |
| 236 | 50 mm bore |
| 237 | 80 mm bore |
| 238 | supply and fix CP stop cock, screwed down with crutch or butterfly handle suitable for GI tubing 15mm dia bore including necessary clamp & saddles all as specified. |
| 239 | Supply and fix CP bibcock, with crutch or butterfly handle screwed both ends for GI tubing 15 mm dia bore including necessary clamp & saddles etc all as specified. |
| 240 | Supply and fix gun-metal, gate valve 50 mm bore in existing line in position with iron wheel head classI, made out of brass, screwed both ends for GI pipe with union, ISI marked complete all as directed of the following :- |
| 241 | Supply and fix gun-metal, gate valve 80 mm bore in existing line in position with iron wheel head classI, made out of brass, screwed both ends for GI pipe with union, ISI marked complete all as directed of the following :- |
| 242 | Supply and fix (HDPE) Rotational moulded plythelene water storage tanks 5000 Ltrs Capacity cylindrical vertical with closed top of following capacity hoisted and fixed in position including 03 Nos adopter, washer, inlet,outlet over flow pipe complete all as specified and directed by Engr-in-Charge. |
| 243 | S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, based, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, siffeners, gusset plates, of size Fe 410-W (GdeE-250) quality A or all as specified and directed by Engineer-in-Charge.(ii) Cost of making necessary holes in wall making good the disturb surfaces using cement and sand mortarfor fixing iron section is deemed to be including in the rate quoted. |
| 244 | M & L Construction of brick masonry valve chamber of size 1.2 x 1.2 x 1.2 M (internal dimension) (above GL 0.30 mtr) suitable for fixing of sluice valves, 15 cm thick foundation using PCC 1:4:8 type D-2 over 15 cm thick hardcore of broken stone, 23 cm thick brick walls built in cement and sand mortar 1:4, 15 mm thick internal and external plaster inlcuding top of floor in cement and sand mortar 1:3, 15 mm thick, finished even and smooth, without using extra cement, 5 mm thick plate cover on 50 mm x 50 mm x 6 mm MS angle frame embeded in PCC 1:2:4 type B-1 coping, having rectangular, hinged, opening of size 150 x 100 mm with locking arrangements, hold fasts, etc. applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil complete all as specified and directed. |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail