|
| 1 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer in charge with in a distance of 60mt (200feet) S.I. no 692 |
| 2 | Dismanting iron Doors or windowincluding stacking of dismantied materials as directed by Engineer in charge with in a distance of 60 mt. (200feet) Sl No. 703 |
| 3 | M-150 classbrick work 1:4 in super structure cement ,c. sand mortar etc all completeS.I. No. 305b+310 |
| 4 | RCC work in 1:2:4 in Lintal cement ,c.sand&20mm stone Grite etc all complete S.I.NO 283 |
| 5 | Mildsteel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and includingsupply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. S.I. NO.- 504 |
| 6 | 12mm thick cement plaster 1:3 cement ,c. sand mortar etc all completeS.I.NO. 580 |
| 7 | Providing and applying White cement based putty Avg. thickness 1mm of approved brand and manufacture over the plaster wall surface to prepare the surface even and smoth complete D.S.R. - 13.80 |
| 8 | Finishing walls with Premium Arcylic smoth exterior paint with Silicone additives of required shade(Two or more coat applied @ 1.43 Ltr/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) (apex Ultima, Weather coat all quard) asin, berger D.S.R. No. - 13.47.1 |
| 9 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm D.S.R. no 11.47.2 Year 2021 (Rate=1676.15-17.55%=1381.98) |
| 10 | Supply and laying of wall Tiles on 12mm Base in old Toilet.D.S.R.- 8.31 |
| 11 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete D.S.R. no. 11.40 (Rate=1225.10-17.55%=1010.10) |
| 12 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges f 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin- charge and as per manufacturer\"s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 D.S.R.no 12.45.4 |
| 13 | Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.5 mm thick D.S.R. 9.127.1 |
| 14 | P/F water clost squating pan (orrisa W.C. pan ) with 100 mm. P.V.C. P trap,10 litre low level white pvc flushing cistern including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixture complete, including cutting and white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests i/c. supply of all material,labour,T&P etc. complete dsr 17.1.1 |
| 15 | S/F of Cammod with 10 liter capacity PVC flushing sistern and C.P. jet D.S.R 17.15+17.16a+17.18.1 |
| 16 | S/F of Wash hand basin 600x450mm with Paidistal and with pillar cock D.S.R. 17.7.1+17.8 |
| 17 | S/F of Hand Showar |
| 18 | S/F of CP Brass Angle ValveD.A.R.- 18.5.3 |
| 19 | S/F of CP Brass Long nose Bib Cock Heavy Quality18.50 |
| 20 | S/F of PVC CONNECTION |
| 21 | S/F of S.S. JALI ROUND JALI 100 DIA |
| 22 | S/Laying of 20mm CPVC pipe 18.8.2 |
| 23 | S/Laying of 25mm CPVC pipe |
| 24 | S/Laying of 110mmdia PVC pipe |
| 25 | S/instlationofPVC water storage tank |
| 26 | S/O SS office chair |
| 27 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point lockinghaving transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). D.S.R. no. 9.147A-5Door/Window double leaf D.S.R. No. 9.147A.4 |
| 28 | S/F Cartain with palmet and palmet -rod. Etc all complete |
| 29 | Oil Painting Two coat on previousely painted surface S.I. 642 + 643 |
| 30 | Wireing point for light with 1.5sq. Mm PVC Insulated singil core Coper Condctor Cable with PVC Conduit SI. No. 121C |
| 31 | Wireing point for power plug 2 way with 1.5sq. Mm PVC Insulated singil core Coper Condctor Cable with PVC Conduit SI. No. 124C |
| 32 | Tube light LED |
| 33 | Cieling Light |
| 34 | Cope light |
| 35 | Cilling fan 48\" |
| 36 | Erection of Rod 75cm |
| 37 | Erection and Testing of ceiling fan -SI No. 1116 |
| 38 | Suply, fixing and testing ofWall fan (400mm with 3 blad) Havels45\"x45\" |
| 39 | S/O New Wood Computer Table complete with side almiraha and self |
| 40 | Suplly & Instalaetion of 1hp Sabmersible pump with borring with lowring of necessary pvc pipe etc. |
| 41 | p/F of fly proof wire gauge to windows & doors S.S. grade 304 wire gauge of 0.5 mm dia & 1:4 mm apertube on both sides. DSR No. 10.29.2 |
| 42 | s/f OFFICE MODER table & chair . |
| 43 | Expaintion air conditioners eith invertor Technology 5 star |
| 44 | Misclenious items |
