Military Engineer Services-MES has published Tender For Special Repair To Bldg No T - 44 And Provn Of One Bathroom At Kufri Under Ge (I) Jutogh. Submission Date for this Tender is 20-12-2023. Building Work Tenders in Shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Nov-2023 | Changes in BOQ | BOQ | 13-12-2023 |
| 2 | 02-Dec-2023 | Changes in BOQ again | BOQ | 13-12-2023 |
| 3 | 13-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-12-2023 |
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and directed. |
| 2 | Excavation in trenches not exc 1.50 M wide and n exc 1.50 m in depth for foundation and getting out in hard/dense soil, complete all as specified and directed. |
| 3 | Rough excavationn. exc 1.5m deep and getting outinhard and dense soil complete all as specified and directed. |
| 4 | Excavating over areas, n exc 1.5 m deep and getting outhard/dense soil complete all as specified and directed. |
| 5 | Returning filling in including speading,leveling ,watering and well ramming in layer complete all as specified and directed . |
| 6 | Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point, complete all as specified and directed. |
| 7 | M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed. |
| 8 | M&L for stone masonryrandom rubble, well bonded, bedded and solidly hearted in CM 1:6 in retaining walls abutments brought upto coarses complete all as specified including necessary provn of weep holes etc., complete all as specified and directed. |
| 9 | M&L for brick work with old size kiln burnt sub class "B" bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 completeall as specified and directed. |
| 10 | M&L for brick work with sub class "B" bricks, straight or curvedon plan to any radius in half brick thick built in CM 1:4 with sub class "B" bricks of class designation 10(minimum compressive strength of brick 100 kg/Sqcm), complete all as specified and directed. |
| 11 | M&L for 40 mm thick cement concrete 1:2:4, type B-0, M-15 Nominal Mix using 12.5 mm graded crushed stone aggregate as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note: - water proofing compound will be measured and paid separately. |
| 12 | M&L for PCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in coping to retaining walls/ steps/ parapet/ base of railing post hold fast block etc., including necessary formwork complete all as specified. |
| 13 | M&L for 75mm thick PCC 1:3:6,type C-2, using 40mm graded crushed stone aggregate as in plinth protection and path finished concrete surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 14 | M&L for TMT bars 10 mm dia and over up to and including cranking , bending, hooking end and binding with and including mild steel wire not less than 0.9 mm dia and securing with clips, complete all as specified and directed. |
| 15 | All as per Srl item No 14.00 above but for 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed. |
| 16 | S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 17 | S & F galvanized mild steel wire cloth 0.56mm fixed nominal dai of wire and avrg widh of aperature 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed. |
| 18 | S&F 4mm thick figured glass, pin head type quality and glazing with oil putty or secured with wdn beads as required in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 19 | M&L for rendering 15mm thick in CM 1:6 onfair faces ofbrick wall or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4surface finished fair & even complete mixed withwater proofing compound@ 3% by weight of cement or as per manufacturers instruction, at any height complete all as specified anddirected. Note: - water proofing compound will be measured and paid separately. |
| 21 | Supply only water proofing compound (WPC) complete all as specified and directed. |
| 22 | M&L for Hard core of gauge n exc 63mm thick of broken stone or boulder spread and levelled in layers n.exc 15cm thick,watering, ramming to true surface complete all as specified and directed.. |
| 23 | M&L for 75mm thick PCC 1:3:6,type C-2, using 40mm graded crushed stone aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement,complete all as specified and directed. |
| 24 | M&L for 100 mm thick plaincement concrete 1:4:8 type D-2 , using 40 mm graded stone aggregate as in sub base, complete all as specified and directed. |
| 25 | M&L for Non skid ceramic coloured tiles 7 to 8mmthick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mmthick screed bed with cement mortar 1:6, complete all as specified and directed. |
| 26 | M&L forglazed ceramic coloured tiles in vertical surface 300x200x7/ 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchlaid over over 10mm thick backing coat in cement mortar 1:4 etc., complete all as specified and directed. |
| 27 | M&L for chequered cement concrete tiles rubber moulded pre polished with lacquer finish pre polished glossy finish 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20mm thick screed bed in CM 1:6 Complete all as specified and directed. |
| 28 | M&L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint chalk whiting, complete all as specified and directed. |
| 29 | S&F Framed work such as grills, gratings, etc.,with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladder; framed baluster; walk ways; railing; framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165, complete all as specified and directed. |
| 30 | M&L for rotational moulded polyethylene water storage tanks 1000 Ltrcapacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified and directed. |
| 31 | S&F 20 mm bore ball brass valves high pressure with polythene float and flynut complete screwed or iron, complete all as specified and directed. |
| 32 | S&F Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipes and fixed of 20mm dia of pipe fixed complete all as specified and directed. |
| 33 | M&L for steel tubing medium grade, 20 mm dia, galvanized ISI marked with all fittingsand fixed complete to walls and ceiling or laid in floor, complete all as specified and directed. |
| 34 | M&L forapplying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm wide or girth incl preparation of surface etc., complete all as specified and directed. |
| 35 | S&F 15mm bore steel tubing medium grade galvanized with all fittings and fixtures fixed to wall ceiling or laid on floor, complete all as specified and directed. |
| 36 | S&F15 mm bib taps fancy type cast copper alloy chromium platedwith crutch with butter fly handle, screwed for iron pipe or brass ferrule, complete all as specified and directed. |
| 37 | S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified and directed. |
| 38 | S&F for vitreous china wash basin flat back of size 550x400mmpedestal pattern incl brackets, cutting for and pinning in ends or brackets,but excluding taps, waste, chain and plug and porcelain stopper, complete all as specified and directed. |
| 39 | S&F for brass CP fancy type 15mm bore pillar tap for WHB, complete all as specified and directed. |
| 40 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm long, complete all as specified and directed. |
| 41 | S&F in brass chromium plated tubular towel rail ‘D’ type 60cm long between flange, complete all as specified and directed. |
| 42 | S&F 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted with PVC mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 43 | S & F viterious china squatting span ORISSA Pattern size 580x440mm with integral foot rests, (excl flushing cistern and flush pipe) but with andincl connection to trap, and to flushing pipe anti-syphonage pipe, etc. complete inclprovn of lime concrete and making good to floor, complete all as specified and directed. |
| 44 | S&F 10 litres cap PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and directed. |
| 45 | S&F 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 46 | S & F PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall 110 mm bore, complete all as specified and directed. |
| 47 | S & F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 48 | S&F PVC SWR Bends in any radius 110 mm bore with access door, complete all as specified and directed. |
| 49 | S & F PVC SWR Bends in any radius 75 mm bore with access door, complete all as specified and directed. |
| 50 | S&F PVC (SWR) Vent cowl 110 mm bore, complete all as specified and directed. |
| 51 | S&F for 110mm dia PVC (SWR), junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 52 | M&L for precast cement concrete type B-1 (1:2:4) (20 mm graded stone aggregates) set in Cm (1:6) in cover slab and similar work including formwrok , complete all as specified and directed. Notes : Reinforcement shall be measured masured and paid seperately |
| 53 | S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 54 | M&L for PCC 1:4:8, type D-2, concrete bed to drain pipes including packing under and completely surrounding the pipes after they are laid and tested, bore or pipe in 110mm, complete all as specified and directed. |
| 55 | S&F rolled mild steel section of grade FE-410W (Gde E 250 quality-A ) as in steel post/pillars of any shape (rectangular /circular/ square where connected to roof/ truss etc fixed with angle cleat, base plate etc., complete all as specified and directed. |
| 56 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges ,flashing, eaves board, valley gutter etc, fixed all as per manufactures"s instructions, fixed with self tapping screw with suitable arangement as required, complete all as specified and directed. |
| 57 | S&F for Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,facia, ridges ,flashing, eaves board, valley gutter etc, fixed all as per manufactures"s instructions, fixed with self tapping screws with suitable arangement as required, complete all as specified and directed. |
| 58 | S&F for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, complete all as specified and directed. |
| 59 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet reinforced with MS square tube complete all as specified and directed. |
| 60 | S&F butt hinges medium weight cold rolled mild steel of 100mm size complete all as specified and directed. |
| 61 | S&F aluminium handles,cast type, anodised 125 mm size, complete all as specified and directed. |
| 62 | S&F 200 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed. |
| 63 | S&F vitreous china urinal, half stall type, of size 600 x 355 x 265mm, white (excluding flushing cistern, flush pipe), but including waste pipe fixed, complete all as specified and directed. |
| 64 | Demolition of cement concrete (un- reinforced) in ground floor and paving n. exc 15 cm thick bleow or above round level complete all as specified and directed. |
| 65 | Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed. |
| 66 | Taking down chawkhat or frame with (without taking of shutters from the frames) exc 1.50 sqm but n. exc 4sqm, complete all as specified and directed. |
| 67 | All as per Serl Item No 67.00 above but for n.exc 1.5 sqm, complete all as specified and directed. |
| 68 | M&L for pressed steel frames for doors of size 125 x 60 mm with one or more rebated incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame for making arrangement for fixing of door spring etc. complete all as specified and directed. |
| 69 | S&F 30mm flush shutters, solid core construction, with block board core and plywood face panells, commercial types on both sidesincl teak wood beading alround the shutters, complete all as specified and directed. |
| 70 | S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters factory made open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 71 | S & F factory made steel windows with side hung shutters including box type hinges with steel handle, tower bolt and steel peg stay complete with glazing bars complete all as specified and directed. |
| 72 | All as per srl Item No 71.00 above but without glazing bars, complete all as specified and directed. |
| 73 | Dismantling of boarding of any description and in any position complete all as specified and directed. |
| 74 | S&F 6mm thick in 5 layer Plywood, grade BWR,type BB, fixed with screws to timber frame work etc complete all as specified and directed. |
| 75 | S&F 9mm thick in 5 layer Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified. |
| 76 | S&F 1.5mm thick decorative laminate(mica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions complete all as specified and directed. |
| 77 | Dismantling timber scantlingsin any position in fillets, rails, posts, rafters , purlins, etc. under 40 sq. cm in section (Unframed work) complete all as specified and directed. |
| 78 | M&L for plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 13 sq.cm and not exc 25 sq.cm ,incl paintings, complete all as specified and directed. |
| 79 | M & Lfor plain fillets,but bull nosed, splayed, chamfered or rounded on oneedge or face hard-wood clean sawn in sectional area exc 6 sq.cm and not exc 13 sq.cm complete all as specified and directed. |
| 80 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 81 | S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy bracketsframing (beam, tee, angle, gusset plate, channel or flat section including distance pieces, cleats etc, structural steel confirming to Fe-410w, Gde 250, quality "A", complete all as specified and directed. |
| 82 | S&F3mm thick Sheet glass, ordinaly quality and glazing with oil putty or secured with wdn beads as required in square n exc 0.5 sqm in each pane, complete all as specified and directed. |
| 83 | M&L 50mm thick plain cement concrete 1:3:6 type C2using 40mm graded stone aggregate, laid in 1:20 slope as in plinth protection, coping, surface finished even and smooth without using extra cement, with and incl use and waste of necessary form work complete all as specified and directed. |
| 84 | S & F Mild steel butt hinges medium weight , cold rolled, 50mm, ISI marked, complete all as specified and directed. |
| 85 | S&F 2nd class hard wood hollock small fittings such as brackets of any type, latch and hinge blocks, door stops and window stops, the like incl all necessary labours articles n. exc 200 cucmeach complete all as specified and directed. |
| 86 | S & F 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 87 | S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 88 | S&F 125mm mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed. |
| 89 | S&F in repair of 300mm mild steel ordinary rate tail rod pattern door spring incl roller and roller plate complete all as specified and directed. |
| 90 | M&L for mild Steel works as in bends straps, hold fasts etc, conforming to IS-20620:2006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified and directed. |
| 91 | M&L for preparation of new or previourly untreated surface of wood or board materials of any description not otherwise described over 10cm in or girth & appyling two coats of synthetic enamal paint over a coat of pink primer, complete all as specified and directed. |
| 92 | Dismantling plain or corrugated steel sheeting any guage thickness incl Nainital pattern as in roof covering, complete all as specified. |
| 93 | S&FCGI sheeting 0.63mm thick with grade of zinc coating 275 as in roof covering fixed with L or J type hooks or self thread making steel screws of length not less than 75mm as directed at site with suitable arrangement as required complete all as specified and directed. |
| 94 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 95 | Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid & dado and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing,complete over and including 15 mm thick screed bed or bedding with CM 1:6 ,etc complete all as specified and directed. Note:- (i) The rate of kota stone shall be deemed to incl for full rounded off corner/ edges incl holes for pipe all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and kota polishing to achive the desired granite finish all as spfd. |
| 96 | Roughening surface of old concrete by picking,sweeping clean and washing downwater to remove dustand brushing neat cement slurry with 3.0 kg of cement per sqm. complete all as specified and directed. |
| 97 | S&F in repair 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate, as in filling of mass concrete for sub base floors, complete all as specified and directed. |
| 98 | M&L for cement concrete/colour chequered tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished,over screed bed as in CM 1:4,15mm thick, complete all as specified and directed. |
| 99 | Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 100 | Dismantling timber scantling un framed work40 sq cm and over in section in any position, unframed work, complete all as specified and directed. |
| 101 | M&L for 2nd class HW clean Sawn timber scantling/posts, complete all as specified and directed. |
| 102 | M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel/ drains incl fair finises &necessary formwork, complete all as specified and as directed. |
| 103 | Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash complete all as specified and directed . |
| 104 | M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H)and unsheathed size 1.5 sqmm with concealedConduit with fixing accessories, to befixed , for one light /fan/bell point controlled by one switchwith pressed steel concealed terminal boxes coveredwith 3mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cablesize 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification , all as specified and directed . |
| 105 | All as per Srl Item No 104.00 above but for one 5 pin 5/6 Amp socket on the same board |
| 106 | All as per Srl Item No 104.00 above but for one 5 pin 5/6 Amp socket on independent board. |
| 107 | All as per Srl Item No 104.00 above but for one 3 pin 15 Amp socket independent but with 2.5 q mm PVC insulated unsheathed copper stranded conductor and earth wire with 2.5 Sqmm |
| 108 | S&F switch piano flush type/ Bell push, 5 Amps, single pole one way complete all as specified and directed. |
| 109 | S&F socket3/5 pins, 5/6 Amp, flush type piano (multi purpose) complete all as specified and directed. |
| 110 | S&F Socket 15 Amps flush type,3/ 6 Pin, 230 Volts , AC complete all as specified and directed. |
| 111 | S&F switch15 Amps flush type 230 Volts , AC complete all as specified and directed. |
| 112 | S&F ceiling rose, PVC/ polycarbonate isolated body of size, 65x20mm,three terminals complete all as specified and directed |
| 113 | S&F lamp holder PVC body with back plate complete with 9 Watt LED lamp complete all as specified and directed . |
| 114 | S&F sheet metal enclosures for MCB distribution boardSPN 12 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed. |
| 115 | S&F MCB SPN 32 / 40 Amps 230Vincl all termnials, fitting etc. complete all as specified and directed. |
| 116 | S&FMCB SP 6-32 Amp ,230 Volt complete all as specified and directed. |
| 117 | M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanisedmeans of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6, type C-2, all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed. |
| 118 | M&L for sub main wiring with two runs of single core 06 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to commonearth dolly , including taking out the old sub main wiring complete all as specified and directed. Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run complete all as specified |
| 119 | S&F LED bulkhead fitting with 10 watt LEDcomplete connection with copper wire complete all as specified and directed. |
| 120 | S&F in replacement energy efficient T-8 LED batten integrated type single tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten with extruded aluminium/PC Body and PC diffuser including all accessories pre wire and connecting up with copper three core flexible wire complete all as specified and directed. |
| 121 | S & FLED mirror light 10 watt with diffuser, decorative type complete all as specified and directed. |
| 122 | M&L for fresh air fan made of PVC body 250 mm sweep 1200 RPM, 230V including fixing arrangement complete with louver sutters and making opening in wall of suitable size incl making good to the surface of wall complete all as specifed and directed. Note:- Old U/s fan to be deposited in E/M store yard. |
| 123 | S&F LED building secuity light 25 watt, incl bracket as per suitable size and all connected accessories (clamps, nut, bolt etc)complete and including taking down existing fittings complete all as specified and directed. |
| 124 | S&F Air termination, single pointed, copper rod 12mm dia and 300mm long with necessary fixing arrangement on pole complete all as specified and directed. |
| 125 | S&Ftest point terminal block made of phosphorus bronze size 75 x 75 x 25 mm thick drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws fixed to copper strip bracket fixed to porcelain insulator in wall complete all as specified and directed |
| 126 | S&F Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors with rubber & bitumen washer & fixed to porcelain insulator on wall for down conductor incl dismantling and taking down old unsv strip complete all as specified and directed |
| 127 | S&F GI strip 32 x 6mm with saddles and fixing screws etc. for roof conductors with rubber and bitumen washer and fixed to porcelain insulator on wall for down conductor complete all as specified and directed. |
| 128 | Supply,Fixing & laying GI tubing light grade 40 mm dia used as protection pipe for earth lead strip in earthing or alongwith pole/wall/culvert/drainge etc for mechanical protection of cable complte all as specified and directed.Note: All required items and acessories, bend, joints, nut and bolts, clamps etc are incl in quoted rates, complete all as specified and directed. |
| 129 | S&F in replacement for 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm GI suspension wire, one twin core cable flat or circular of size 16 sqmm 2 core complete all as specified and directed |
| 130 | S&F sheet metal enclosures for MCB distribution boardSPN 4way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed. |
| 131 | M&L for sub main wiring with two runs of single core 04 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 1 x 2.5 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to commonearth dolly , including taking out the old sub main wiring complete all as specified and directed. Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run complete all as specified |
| 132 | S&F in replacement for 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm GI suspension wire, one twin core cable flat or circular of size 4 sqmm 2 core complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
