Tender For Ward 9 - Construction Of Shg Work Shed (Chaithanya Group), Kollam-Kerala

Tender For Ward 9 - Construction Of Shg Work Shed ( Chaithanya Group ) -2 Stone For Masonry Work 3 Portland Cement 4 Coarse Sand ( Zone Iii ) 5 Stone Aggregate ( Single Size ) :20Mm Nominal Size 6 Stone Aggregate ( Single Size ) :10 Mm Nominal Size 7 Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper 8 Vibrator ( Needle Type 40 Mm ) 9 Solid Blocks Of Size 30*20*15Cm 10 Structural Steel Such As Tees, Angles, Channels And R.S.Joists 11 Red Oxide Zinc Chromate Primer 12 Adjustable Telescopic Prop 3 M ( 2.02-3.75M ) 13 Beam Clamp 300-380 Mm ( 450-1070Mm ) 14 Twisted Steel / Deformed Bars 15 Mild Steel Tubes Hot Finished Welded Type 16 Welding By Electric Plant 17 Galvanised Wire Mesh Of Average Width Of Aperture 1.4 And Nominal Dia.Of Wire 0.63 Mm 18 Wire Nails 19 Gl Trafford Profile Sheet 0.35Mm Thick 20 Bitumen Washer 21 Stainless Steel Screws 50Mm 22 Fine Sand ( Zone Iv ) 23 Deharadun White Lime 24 Anjili Wood Scantls 25 Mild Steel Round Bar Above 12 Mm Dia 26 Flats Up To 10 Mm Thickness 27 Rawl Plug 50 Mm ( Designation 10 Nos ) 28 Bright Finished Or Black Enameled Mild Steel Butt Hinges 100*58*1.90 Mm 29 Bright Finished Or Black Enameled Mild Steel Butt Hinges 50*37*1.50 Mm 30 Bright Finished Or Black Enameled Mild Steel Screws 20 Mm 31 Bright Finished Or Black Enameled Mild Steel Screws 40 Mm 32 Anjili Wood Planks 33 Float Glass Sheet Of Nominal Thickness 4Mm ( Weight Not Less Than 10Kg / Sqm ) 34 24 Mm Thick Factory Made Shutters With Styles, Rails And Panels Of Pvc Extruded Section In White, Grey Or Wooden Finish 35 Anodised Aluminium Butt Hinges 75*63*4 Mm 36 Chromium Plated Brass Screws 30 Mm 37 Anodised Aluminium Tower Bold ( Barrel Type ) 200*10 Mm 38 Brass 100 Mm Mortico Latch And Lock With 6 Levers Without Pair Of Handles 39 Pair Anodised Aluminium Lever Handles For 100Mm Mortice Latch And Look 40 Anodised Aluminium Handles 125 Mm With Plate 175*32 Mm 41 Chromium Plated Brass Screws 25 Mm 42 Viteous China Orrisa Type W.C.Pan Size 580 Mm 43 Flushing Cistern P.V.C.10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessories And Flush Pipe ) 44 100 Mm S.C.I. Trap With Vent Heel 45 Vitreous China Flat Back Wash Basin 550*400Mm 46 15 Mm C.P. Brass Tap 47 C.P.Brass Waste 32 Mm 48 C.I. Bracket For Wash Basin And Sinks 49 Stainless Steel Kitchen Sink-Without Drain Board 470*420Mm Bowl Depth 178 Mm 50 Pvc Pipe 25 Mm Outer Dia.10Kgf Cm2 51 Pvc Pipe 110 Mm Outer Dia.4Kgf Cm2

INR 800 /-

INR 5027.0 /-

Refer document

Name of Work: WARD 9 - CONSTRACTION OF SHG WORKSHED (CHAITHANYA GROUP)

Sl. No.	Item Description
1	SUPPLY OF MATERIALS
2	Stone for masonry work
3	Portland Cement
4	Coarse sand (zone III)
5	Stone Aggregate (Single size):20mm nominal size
6	Stone Aggregate (Single size):10 mm nominal size
7	Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
8	Vibrator (Needle type 40 mm)
9	Solid blocks of size 30*20*15cm
10	Structural steel such as tees,angles,channels and R.S.joists
11	Red oxide Zinc chromate primer
12	Adjustable telescopic prop 3 m(2.02-3.75m)
13	Beam clamp 300-380 mm (450-1070mm)
14	Twisted steel/deformed bars
15	Mild steel tubes hot finished welded type
16	Welding by electric plant
17	Galvanised wire mesh of average width of aperture 1.4 and nominal dia.of wire 0.63 mm
18	Wire nails
19	Gl trafford profile sheet 0.35mm thick
20	Bitumen washer
21	Stainless steel screws 50mm
22	Fine sand (zone IV)
23	Deharadun white lime
24	Anjili wood scantls
25	Mild steel round bar above 12 mm dia
26	Flats up to 10 mm thickness
27	Rawl plug 50 mm (designation 10 nos)
28	Bright finished or black enameled mild steel butt hinges 100*58*1.90 mm
29	Bright finished or black enameled mild steel butt hinges 50*37*1.50 mm
30	Bright finished or black enameled mild steel screws 20 mm
31	Bright finished or black enameled mild steel screws 40 mm
32	Anjili wood planks
33	Float glass sheet of nominal thickness 4mm (weight not less than 10kg/sqm)
34	24 mm thick Factory made shutters with styles,rails and panels of PVC extruded section in white,grey or wooden finish
35	Anodised Aluminium butt hinges 75*63*4 mm
36	Chromium plated Brass screws 30 mm
37	Anodised Aluminium tower bold (barrel type)200*10 mm
38	Brass 100 mm mortico latch and lock with 6 levers without pair of handles
39	Pair Anodised Aluminium lever handles for 100mm mortice latch and look
40	Anodised Aluminium handles 125 mm with plate 175*32 mm
41	Chromium plated Brass screws 25 mm
42	Viteous china orrisa type w.c.pan size 580 mm
43	Flushing Cistern P.V.C.10 lts capacity (low level)(white)(with fittings,accessories and flush pipe)
44	100 mm S.C.I. trap with vent heel
45	Vitreous china flat back wash basin 550*400mm
46	15 mm C.P. brass tap
47	C.P.brass waste 32 mm
48	C.I. bracket for wash basin and sinks
49	Stainless steel kitchen sink-without drain board 470*420mm bowl depth 178 mm
50	PVC pipe 25 mm outer dia.10kgf cm2
51	PVC pipe 110 mm outer dia.4kgf cm2