Military Engineer Services-MES has published Tender For Additional /Alternator/Improvement To Building No. T-64 (Urc ) At Afs Hakimpet Under Ge (Af) Hakimpet. Submission Date for this Tender is 18-12-2023. Building Work Tenders in hakimpet Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-12-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 2 | Dismantling timber scantlings 40 sq. cm and over in section, in any position |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for struts, any size |
| 4 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including frame work,cover fillets |
| 5 | Demolition of Concrete of any description and in any position not otherwise specifically provided for and removed debris outside MD land. |
| 6 | Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in hard dense soil |
| 7 | M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete all as specified and directed by Engineer In charge. |
| 8 | S&F Steel work as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths |
| 9 | S&F Steel work as inRoof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 10 | M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified. |
| 11 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified. |
| 12 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge wall, fixed with self tapping screws as specified |
| 13 | S&F 1mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 |
| 14 | M&L Pre-cast cement concrete Type C1 1:3:6 block masonry with solid blocks, exc. 10 cm in widthbuilt in cemrent mortar 1:4 complete,all as specified and directed. |
| 15 | Rendering 15mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces on walls finished even and smooth without using extra cement complete all as specified and as directed. |
| 16 | M&L for rendering to brick masonry surfaces 10mm thick in cement mortar 1:4, complete all as specified and directed |
| 17 | M&L for 3mm thick wall care putty on wall complete all as specified |
| 18 | M&L 2 coats ofOil bound distemper on a coat of primer on walls withwhite or tinted complete all as specified |
| 19 | M&L Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 20 | S&F false ceiling at all heights withsemi perforated 12mm thick micro tegular edged GRG (Glass Fiber Reinforced Gypsum )false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than2%, humidity resistance of 99%, NRC 0.5-0.75 as per IS 8225:1987, Non combustable as per BS 476 (part 4 )-1970 and light reflectance 85% min to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120 grams per sqm including both sides) comprising of main -T runners ofsize 15 x 32 mm of length 3000mm, cross -T of size 15x32 mm of length1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items ( galvanising @ 80 gms per sqm) i.e. 50mm long, 8 mm outer diameter M6dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the helpof plastic rawl plugs at 450 mm center to center and 40mm long dry wall SS screws all as specified and directed by Engr-in -charge. |
| 21 | M & L for 25 mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base, floor, path, pavings etc.,surface finished fair & even complete all as specified and as directed. |
| 22 | M&L for Vitrified light coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd. |
| 23 | M&L for Vitrified light coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in Dado/ skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match and backingcoat of 10mm thick in CM 1:4 |
| 24 | M&L Machine cut kota stone slab flooring 20-25mm thick overcement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd. |
| 25 | Taking down Chowkhats or frames withshutters exc 1.5 sq. m but n exc 4 sq. m each |
| 26 | M&L Powder coated (minimum thickness of powder coating 50 micron)aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 27 | S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 28 | S&F 5.5mm Sheet glass, selected quality, in squares nexc. 0.5 sq. m each pane complete all as specified. |
| 29 | M&L Prelaminated particle board 12mm thick, interior grade, prelaminated on both sides side with decorative choice lamination fixed with screws to timber frame work |
| 30 | S&F 125 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge |
| 31 | S&F 200 mm size Alluminium,anodised barrel tower boltsof extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge |
| 32 | S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed |
| 33 | S&F 150 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed by the Engineer-in-Charge |
| 34 | 200mmlong Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as direcetd. |
| 35 | Supply and fixing factory made uPVC white colour Two track two panels sliding window upto 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm) comprising of UPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. |
| 36 | Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 37 | Supply and fix Anodised aluminium grill any size 8 mm thick complete with frame or channel section including all necessary fittings complete all as specified. |
| 38 | S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete |
| 39 | Supply ony Chain link of sizeMS galvanised fencing any size or type Complete all as specified and as directed |
| 40 | Fixing onlychain link fencingincluding line wires, any mesh, size and type to any type ofstandard, rails, straining bolts etc., including provision of binding wire Complete all as specified and as directed |
| 41 | Material & labour for Mild steel round bars 10 mm dia and over,cut to length, bent to required shape including cranking, hooking ends and securing with welding with 10 cm overlaping between two bar all as specified and directed by Engineer-in Charge as in in reinforcement. |
| 42 | Material & labour for Flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 290(Gde E 165) Complete all as specified and as directed |
| 43 | Supply & fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n exc 10cm long and dia of neck 11 to 15mm Complete all as specified and as directed |
| 44 | S & Fin repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 90mm to 110mm spacing and straing and fixing to any type of standard rails straining bolts, incluing securing or typing a crossings with an provision of galvanize mild steel wire, staples or steel pins, etc all as directed (each line wire to be measured) in repairs completed all as specified and as directed |
| 45 | Taking down plaster/ tiles on brick or stone walls, etc. in cement lime or cement mortar complete all as specified and as direcetd and removed debris outside MD land. |
| 46 | Material and labour forfor digital coloured glazed ceramic tiles of sizes 300m x 450 mm X 7 mm thick jointed in neat cement slurry, laid over including 10 mm thick rendering coat/backing layer in CM (1:4) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as direcetd. |
| 47 | M&L 3 coats of white wash on surfaces of walls complete all as specified and as direcetd. |
| 48 | S & F in repair for vitreous china, half stall urinal white with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed |
| 49 | S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 50 | S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete. |
| 51 | S&F in repairs 10 litre capacity PVC low level flushing cisternwith all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. |
| 52 | S&F in repair vitreous China wash hand basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete. |
| 53 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as directed by the Engr-in-Charge. |
| 54 | S&F in repair angle valves15 mmbore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed. |
| 55 | S&F Two way taps 15 mmbore fancy type, chromium plated, screwed down, high pressure with crutch screwed both ends for iron pipe or for unions all as specified and directed. |
| 56 | S&F 15 mm borefancy type health faucet with SS hose complete all as specified. |
| 57 | S&F Tubular towel rail, 20mmdia, D type, 60cm long between flanges all as specified and directed. |
| 58 | S&F in repair 15 mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure complete all as specified and as direcetd. |
| 59 | Supply and fix 15 mm bore LDPE pipe 45cm long withbrass nuts and washers on both ends all asin repairs specified and directed. |
| 60 | Supply and fix 30 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete |
| 61 | Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed. |
| 62 | Taking down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store all as specified and directed |
| 63 | Supplying and laying 16mmbore of CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc. in repairs including concealed piping after cutting in brick work/ stone masonry walls where ever required complete all as specified and directed. |
| 64 | All as per item above but 20mm bore. |
| 65 | S & Fin repair 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position all as specified and directed. |
| 66 | S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed. |
| 67 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed. |
| 68 | S&FPVC (SWR)110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as direcetd. |
| 69 | S&F PVC (SWR) bends of 110mm bore complete all as specified and as direcetd. |
| 70 | S&FPVC (SWR)75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as direcetd. |
| 71 | S&F PVC (SWR) bends of 75mm bore complete all as specified and as direcetd. |
| 72 | S&F PVC (SWR) floor trap of 75mm, plain with grating including jointing with solvent cement complete all as specified and as direcetd. |
| 73 | Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 74 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by engineer in charge. |
| 75 | Taking down copper/ aluminum point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials for taking credit and making good disturbed surfaces of walls, floors etc. including paint tuch up to match with the existing surface as per site requirement complete all as specified and directed by Engr-in-Charge. |
| 76 | Taking down existing unserviceable distribution board with MCBs, switch fuse unit, enclosureand making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed by the Engineer in charge. |
| 77 | Taking down Existing old UNSV submain wiring of any description /type size and removal of UNSV material from site and making good the disturbed surface of walls / ceiling so asto match with the existing finishes all as specified and as directed by the Engineer -in- charge . |
| 78 | M&L for point wiring with 1.5 sq.mm FRLS insulated multistranded copper conductor, 1100 volts grade single core PVC insulated and unsheathed cable drawn through newPVC conduitof suitable size but not less than 20 mm dia in consealed of stone/concrete wall /roofetc allas per site requirement including FRLS,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour codingand pressed steel terminal boxes made out of 1.6 mm thick MS sheet with sink into the wall for mounting, 60 mm deep coveredincluding laminated sheet, required sizes switch modular covers or 3 mm thick laminated hylam sheet fixed with cadmium plated screws/ PVC gang box fully enclosed type for mounting switches, sockets, fan regulator, etcincluding making good the disturbed surfacesof walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge. |
| 79 | a)One light point controlled by one switch. |
| 80 | b)One 3 pin 6 Amps socket point controlled by one switch on same board. |
| 81 | c)One 3 pin 6 Amps socket point controlled by one switch on independent board. |
| 82 | d)One ceiling fan point controlled by one switch and regulator. |
| 83 | All as per itemhere-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F switch Modular type single pole one way6 Amps 240 volts complete all as specified and as directed. |
| 85 | S&Fsocket2 in 1,3 pin 6 Amps, modular type, universal ,240 volts completeall as specified and as directed |
| 86 | S&F of switch Modular type single pole one way16 Amps 240 volts complete all as specified and as directed. |
| 87 | S&Fof socket 2 in 1,3 pin 6/16 Amps, modular type, universal ,240 volts completeall as specified and as directed |
| 88 | S&F of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz2 module size in 5 stepsmodular type complete all as specified and directed. |
| 89 | S&F of ceiling rose 6 A, 3 plate,PVC/ polycarbonate, insulated body 240 Volt , 50 Hz all as specified and as directed. |
| 90 | M&L for submain wiring alongwith earth wire with 3 x 6.0 Sqmm FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC Conduit/ casing capping maintaning the colour coding as per electric rules and all required accessories of suitable size consealedion wall/roofcomplete all as specified and directed by Engineer-in-Charge. Note:Three runs of 6 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length. |
| 91 | All as per item here-in-before but with 5 x 6.0 sqmm FRLS PVC insulated copper conductor cable complete all as specified and directed by Engineer-in-Charge. Note: Five runs of 6.0 Sqmm copper cable and one run of PVC conduit/casing capping shall be measured as one unit length. |
| 92 | All as per item here-in-before but with 5 x 10.0 sqmm FRLS PVC insulated copper conductor cable complete all as specified and directed by Engineer-in-Charge. Note: Five runs of 10.0 Sqmm copper cable and one run of PVC conduit/casing capping shall be measured as one unit length. |
| 93 | Supply and fix MCB distribution board double door type SPN 12 way sheet steel powder painted with bus bar ,neutral link & earth bar etc.with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing circuit complete all as specified and directed by Engineer-in-Charge. |
| 94 | All as per item above but of SPN 4 way. |
| 95 | S&F MCBTriple pole and Neutral (TPN) of capacity 40-100 Amps 415 volts ,breaking capacity 10 KA,"C" series ,fixed in proper position all as directed by the Engineer in charge . |
| 96 | Supply and fix MCB, SPN, 40-63 Amps, 240 Volts |
| 97 | Supply and fix MCB , SP, 6 - 32 Amps, 240Volts |
| 98 | Supply & fixing in replacement ofhigh efficacy recess luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extrured diffuser giving glare free lightand good aesthetic appeal 35/36 W LED (2ft X 2ft) complete with all accessoriesincluding connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make:- Havells/Philips/ Bajaj |
| 99 | Refixing only of tube light/ LED fittings retrieved from site after cleaning complete of any type or capacity including all fixing accessories including connecting up with three core twisted flexible copper conductor cable up to 3 Mtrs length with suitable size complete all as specified and directed by Engineer-in-Charge. |
| 100 | Supply and fixing BLDC ceiling fans complete with blades, down rods and accessories such as hook for fixing to ceiling, nut, bolts, washers, pins etc. 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including all fixing accessories all as specified and directed by the Engineer-in-Charge. Make:- Havells/Usha/ Bajaj |
| 101 | Disconnecting and removingceiling fan of any sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, includingreplacement of wornout/defective parts, refixing in original position includingminor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified. |
| 102 | Supply and fix in repairLED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed by Engineer-in-Charge. |
| 103 | M&L GI Pipe Bracket made out of Galvanised Iron Tubing 40mm bore (dia), light grade, 1.50 Metre long bent to shape as per specified for fixing Street Light Fitting including suitable size of clamps and applying Two coats of Aluminium Paint over a coat of Aluminium Primer including taking down old unserviceable GI Pipe Bracket with clamps, complete all as specified and as directed. |
| 104 | Taking out ACs from site and depositing to E/M Store yard with complete accessories and refixing to the building after completion of the repair works including maintenance of the complete AC indoor unit and out door unit including filling of the Gas if required at the time of commissioning of the unit. The quoted rates willl be inclusive of replacement of the items damaged by the labour during desmantaling or transpotation. |
| 105 | Supply and fixsheet metal powder painted double pole enclosure with a two pin and earth plug and socket flushing in wall including 20 Amps rated double pole MCB 10 KA, "C" curve complete all as specified and directed by Engineer-in-Charge. |
| 106 | Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp including provision of mounting pole of suitable Dia& Height all as specified & directed by Engineer-in-Charge complete. |
| 107 | Supply and connect PVC insulated, PVC Sheathed flat twin core cable with stranded aluminium conductor of size 6 sqmm including takingdown existing unserviceable wire complete all as specified and directed by Engineer-in-Charge. Make: Finolex/ Polycab/ Havells |
| 108 | Material and labour for 40mm dia bore tubes, "light grade" galvanised, with all fitting and fixed complete to walls/ poles or laid in trenches/ floors for cable protection complete all as specified and directed by Engineer-in-Charge. |
| 109 | Supply & fixing in replacement of LT PVC insulated, heavy duty aluminium conductor multi stranded, served with an innersheathing of PVC tapearmoured with galvanised steel wire or tape underground cable of 16 Sqmm, 2 core in trenches or fixed on pole/wall or drawn through pipes including suitable size Lugs & Glands etc complete all as specified and directed by Engineer-in-Charge. |
| 110 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting in hard/dense soil for laying of cables/ for erection of poles/ for stay assembly etc complete all as specified and directed by Engineer-in-Charge. |
| 111 | Supply and spread clean dry river sand in trenches for cushioning of cable complete all as specified and directed by Engineer-in-Charge. (Note: Punned down thickness only shall be measured for the purpose of payment) |
| 112 | Supply and laying sub class "B" bricks laid dry and flat old size across the length of cable for protection of cable complete all as specified and directed. |
| 113 | Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by Engineer-in-Charge. |
| 114 | Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 115 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead strip 32x6 mmsize upto 7.5 mtr long in single length by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 5 of SSR part I including necessary excavation in hard/dense soil and earth work GI pipe 20mm dia mediumj grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to LT panel board as indicated including testing complete all as specified and as directed. |
| 116 | Material and Labour for earthing pit display boards made out of 3mm thick MS sheet of size 30 x 35cm welded to 75cm long 25 x 25 x 5 mm thick MS angle iron grouted in PCC 1:3:6 (with 20mm stone aggregate) to a depth of 20 cm and applying two coats of synthetic enamel paint of approved color over a coat of red oxide primer and writing the letters on plate for showing the following details: 1. EARTHING PIT NO: 2. DATE OF MEASUREMENT : 3. NEXT DUE DATE: 4. STANDARD VALUE: 5. VALUE OBTAINE: 6. MEASURED BY: 7. SUPERVISED BY: Note : Shape, size and colour of display board should be approved by Engr in Charge before fixing at site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
