Tender For Construction Of Shed For Parking Of Car/Scooter At Icar-Nrcp, Solapur, solapur-Maharashtra

Tender For Construction Of Shed For Parking Of Car / Scooter At Icar-Nrcp, Solapur; 1 Construction Of Shed For Parking Of Car / Scooter 2 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan ) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. All Kinds Of Soil 30 Cum 3 Supply And Fitting In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete 1 Cum 4 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering-All Work Up To Plinth Level: 1:4:8 ( 1 Cement:4Coarse Sand ( Zone-Iii ) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources ) 3.5 Cum 5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering – All Work Up To Plinth Level:1:2:4 ( 1 Cement:2Coarse And Sand ( Zone-Iii ) Derived From Natural Sources: 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) 25 Cum 6 Dry Stone Pitching 22.5 Cm Thick Including Supply Of Stones And Preparing Surface Complete 9 Sq. Meter 7 Supplying And Stacking At Site. Moorum 50 Cum 8 Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 120 Kg 9 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes 1900 Kg 10 Providing And Fixing Precoated Galvanized Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( +0.05% ) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is:277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Meter Or As Drilling / Self-Tapping Screws Of Size ( 5.5X55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 216 Sq Meter 11 Providing And Fixing Precoated Galvanized Steel Sheet Roofing Accessories 0.50 Mm ( +0.05% ) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is:277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling / Self Tapping Screws Complete: Ridges Plain ( 500-600Mm ) 17.5 Meter 12 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Ofrequired Colour To Give An Even Shade:Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture 50 Sq. Meter 13 Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 ( 1 Cement:6 Coarse Samd:12 Graded Stone Aggregate 20Mm Nominal Size ) Upto Plinth Level With: Cement Mortar:1:6 ( 1 Cement: 6 Coarse Sand ) 5.7 Cum

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	23-11-2023	TECHNICAL BID CORRIGENDUM	Other	11-12-2023

Refer document

Refer document