Military Engineer Services-MES has published Tender For Provn Of Store Room Near Bldg No P 60 Kitchen Plate Rack In Or Md Accn Water Pipe Line From Water Tank To Kitchen In Bldg No 62 140 Jcos Or Md Accn 05 Gysers For 3J Dwt Stn Or Mess Or Bathroom And Spl Repair To Compound Wall Of Single Li. Submission Date for this Tender is 25-12-2023. Building Work Tenders in ranikhet Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-12-2023 |
| 2 | 19-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-12-2023 |
| Sl. No. | Item Description |
| 1 | BOQ ( Sch "A") B/R items Demolition of cement concrete (unreinforced)in ground floors and pavings incl chequered tiles (if any) not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation,filling,sub base complete all as specified and directed. |
| 3 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding6m mean radius, built in CM (1:6) complete al as specified |
| 4 | M & L for design mix M-25 (20mm graded crushed stone aggregates) for beams, cantilevers,chhajja, bressummers, lintels over 1.5 m span complete all as specified & directed. |
| 5 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams rough finished surfaces of concrete flat complete all as specified & directed. |
| 6 | M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 7 | M & L for TMT bars 6mm to 8mm dia as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 8 | M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement laid in bays incl necessary form work complete all as specified and directed. |
| 9 | M&L for 25 mm thickCement concrete type-B-0 1:2:4 (12.5 mm graded stone aggregate) as in sub base of floors all as specified and directed |
| 10 | M & L for non skid ceramic coloured /printedtiles7 to 8mm thick (square / Rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floorsetc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles, over with and incl screed bed or bedding layer 15mm thick in cement mortar(1:6) for laying floor finishes complete all as specified & directed. |
| 11 | M & L for non skid ceramic coloured /printedtiles7 to 8mm thick (square / Rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm as in skirtings, dado, in vertical surfaces, etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles, over with and incl backing coat of 10mm thick in cement mortar (1:4) for laying wall finishes complete all as specified & directed. |
| 12 | M & L for glazed ceramic coloured / printed tiles 300mm x 450mm, 6 to 7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles,over with and incl backing coat of 10mm thick in cement mortar (1:4) for laying wall finishes complete all as specified & directed. |
| 13 | M&L for rendering 15 mm thickon fare faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement includigmixing of water proofing compound of approved makecomplete all as specified. Note:- WPC shall be measured and paid separately. |
| 14 | Supply only integral water proofing compound complete all as specified & directed. |
| 15 | M & L for 15 mm thick rendering in cement mortar 1:6 on fare faces of brick work or concrete surfaces, surface finishedeven & smooth with using extra cement complete all as specified and directed. |
| 16 | M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed |
| 17 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 18 | M & L for MS rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 290 gde E -165 complete all as specified and directed. |
| 19 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed. |
| 20 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screwscomplete all as specified and directed. |
| 21 | S & F for Aluminiumanodised snap grid frame work for false ceiling comprising of following section for making partitions of 605 X 605 mm size fixed to walls with rawl plugs and screws and hang to roof with2 mm dia. G.I. wire (upto 1200mm length) adjusting levelfixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners12.5mm dia. 40mm long complete all as specified. size of main tee shall be :- (i)36.5mmx25mmx1.4mm thick, Weighing 0.24Kg/Rm (ii)Cross Tee 23.5mmx36.4mmx1.4mm thick Weighing 0.191 Kg/Rm and (iii)Wall angle 40mmx25mmx2mm thick. Weighing 0.36 Kg/Rm |
| 22 | S & F 4 mm thick non asbestos fiber disigner ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 600 X 600 mm size fixed with staples on snap grid as in ceilingwith and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed |
| 23 | M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 24 | S & F MS framed work such as grills, gratings,gates etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, grade E-165 complete all as specified and directed. |
| 25 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed. |
| 26 | S&F 30 mm thick 2nd class hardwood glazed and skeleton window shutters rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.20(b); supplied and fitted in chowkats , but divided into squares, with plain, chamfered or roun ded, mitred and rebated sash bars, any numbers complete complete all as specified and directed. |
| 27 | S & F butt hinges, medium weight, Mild steel and fixed, size of hinges 75mm complete all as specified and directed. |
| 28 | S & F butt hinges, medium weight, Mild steel and fixed, size of hinges 100mm complete all as specified and directed. |
| 29 | Supply and fixing 100 mm mild steel pressed handles, oval type, stove enamelled black and fixed withwooden screws, complete as specified and directed. |
| 30 | Supply and fixing 150 mm mild steel pressed handles, oval type, stove enamelled black and fixed withwooden screws, complete as specified and directed. |
| 31 | S&F mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 100 mm (ISI marked) fixed complete fixed with screws,complete as specified and directed. |
| 32 | S&F mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 150 mm (ISI marked) fixed complete fixed with screws,complete as specified and directed. |
| 33 | Supply and fixing mild steel sliding door bolt plate type (ISI Marked) stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts, length of bolt 300 mm and fixed with mild steel wood screws all as specified and directed |
| 34 | S & F floor door stopper of chromium plated body with rubber shoe fixed in door, overall length of cover plate140 mm all as specified and directed. |
| 35 | S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 36 | S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steelwire staples complete all as specified and directed. |
| 37 | M & L for preparation of new surfaces of steel and iron work and applying painting to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 38 | M & L for preperation of new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and directed. |
| 39 | S&F stainless steel wall mounted plate rack of size 780x760x240mm, made from the stainless steel sheet having thickness 1 mm and weight not less than 7.50 Kg, design & pattern as approved by GE, having sufficient space for placing crockeries, fixed on wall with rawl plug & screws, complete all as specified and directed |
| 40 | S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all GI fittings such as bends,tees,short pieces,connectors,elbows,reducers,union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed. |
| 41 | S&F GI water tubing of 20 mm dia ,medium grade conforming to IS-1239(Part -1) including all GI fittings such as bends,tees,short pieces,connectors,elbows,reducers,union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed. |
| 42 | S&F bib taps, cast copper alloy, 15 mm dia, Chromium Plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed. |
| 43 | M&L for 75 mm thick plain cement concrete type C-2 1:3:6 type (using 40mm graded stone aggregate) as in sub base to floors and paving etc all complete all as directed. |
| 44 | M&L for Chequered cement concrete tiles 25mm thick with mixture of white and grey cement in equal proportion and no pigment, set,area of each tile exceeding 0.05 sqm but not exceeding 0.09 sqm, jointed and pointed in near cement slurry in floors,laid on screed bed or bedding layer of mortar 15mm thick 1:6 cement mortar complete all as specified & directed. |
| 45 | M& L for filleting in any position and any shape in cement morter 1:4 including all mitres, stops, etc. exc. 25 sq.cm but n.exc 50 sq.cm complete all as specified & as directed. |
| 46 | Demolition brick work or stone/ boulder or precast PCC block masonery built in cement mortar including all quoins , pillars etc complete all as specified and directed. |
| 47 | M&L for precast cement concrete 1:3:6 type C1(using 20 mm graded stone aggregate) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed. |
| 48 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m Complete all as specified and directed. |
| 49 | BOQ ( Sch "A") E/M items S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface)and sunk cast ironor pressed steel terminal boxes for mounting fittinglike switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size (FRLS) copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :- (a)One light/one fan/one bell point controlled by one, one way switch. |
| 50 | S&F switch piano flush type single pole, one way 5 Amp complete all as specified and directed. |
| 51 | S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed. |
| 52 | S & F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. |
| 53 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 54 | S & FLED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser including LED light driver holder, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. Make : Havells cat part No HEXAFT10WLED857SSYMBOPC, CROMPTON cat part No LMHE-10CDL or equavalant make of C&S, Bajaj,Philips,Wipro, Eveready |
| 55 | S & F MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve typecomplete all as specified and directed. |
| 56 | S & FMCB single pole and neutral, 240 volts, 25-32 Ampere, rupturing capacity 10 KA,"B’ curve type complete all as specified and directed. |
| 57 | S&Fsheet metal enclusure for DBs(double door type)single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 58 | S& F LED Bulb of 9 watt of make Havells/crompton/HPL or equivalent approved make with 5 years warrantee complete all as specified and directed . |
| 59 | Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed . |
| 60 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying ofunderground cable and getting out in any type of soil complete all as directed. |
| 61 | Returning, fillingin, including spreading,leveling watering and well ramming in layers n.exc 25 cms thick in any type soil complete all as specified. |
| 62 | Removal of surplus soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified. |
| 63 | M&L for sand cushioning in trenches spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified and directed. Note:- Pund thickness of sand shall be measured and paid |
| 64 | M&L for laying of bricks well burnt sub class ‘B’ (old size) laid flat for cable protection width equal to the lengrth of brick complete all as specified and directed . |
| 65 | M & L for galvanised steel water tubing "light grade"40mm bore with all GI fittings laid under the roads, drains, culverts and fixed on poles etc complete all as specified and directed . |
| 66 | M&L for earthing complete with galvanised steel,earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs belowground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handleto cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost by the contractor. |
| 67 | M & L for sub main wiring PVC conduit concealed typewith 2 runs of 4 Sq.mm for phase, neutral and 2.5 Sq.mm for earth continuity PVC insulated unsheathed cable FRLS grade with copper conductor single core multi stranded 1100V grade confirming to IS - 694 drawn through and including25mm dia concealedPVC conduit (Heavy grade as per IS - 9537, Part - III) includingconduit includingPVC conduit accessories not less than 20mm diaincluding conduit accessories , junction boxes etc., all as directed. NOTE:-2 Runs of 4 Sqmm + 1 run of 2.5 Sqmm cable, 1 run of PVC conduit shall be measured as 1 RM. |
| 68 | S&F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps complete all as specified and directed. |
| 69 | S&F sheet metal enclosure for DBs(double door type)single pole and neutral 2 way without busbar including blacking plate as required , 240 volts fixed complete all as specified and directed. |
| 70 | Supply and fixing Geyser 25 Ltr Capacity ,steel body ,copper tank,BEE five star rating, heating element upto 2 KW, ISI mark, with all accessories such as safety valve, thermostate, NRV, connection piece etc & making 04 Nos hole and grouting of suitable size of nuts and bolts and making good as per existing surface complete all as specified and directed. |
| 71 | S & F 15mm bore GI water tubing medium grade, galvanised with all GI fittings (such as bends,elbows, tees, conectors, short pieces, back nuts, unions, caps & plugs etc)laid in trenches/on surfaceincluding connection with existing storage tank, cutttting, threading and testing complete all as specified and directed. |
| 72 | Supply and fixingstop valves, cast copper alloy15 mm dia fancy type, chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 73 | Supply and fixing 15mm bore bib taps, cast copper alloy with crutch or butterfly, handle, screwed down screwed for iron pipe or brass ferrul and fixed complete all as specified and directed. |
| 74 | S & F 450 mm long PVC connection 15mm size with PTMT nuts for cold and hot water complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
