Uttar Pradesh Jal Vidyut Nigam Limited has published Tender For Construction Of Sarai And Lunger Hall Near Hanuman Mandir Adjoining Paonta Weir Of Khara Hydro Power Project Paonta Sahib Hp. Submission Date for this Tender is 18-12-2023. Building Work Tenders in saharanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift up 1.5 M and lead upto 30 M and including filling, watering and ramming of excavated earth into the trenches or into the sides of foundation trenches as directed by the E/Ifor proper completion of work. |
| 2 | River Bed Fine Sand filling in plinth including supply of necessary quantity of fine sand from outside the UPJVNL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. |
| 3 | Pre-Construction anti-termite treatment, by creating a barrier under and around the columns pits, foundation trenches, under floors, junctions of Walls & floors, around the external perimetre of building, expansion joints, surrounding of pipes and conduits etc. (Plinth area of the building at ground floor only shall be measured as per I.S. 6313 (Part II 1981))with Eldrine emulsifiable 0.2% concentration or any other approved material such as Heptachlore or chlordance will be used. The consumption of emulsion shall be (i) Foundation and masonary @ 5 Ltrs/Sqm, (ii) Back fills in immediate contact of foundation@ 7.5 Ltrs. / Sqm, (iii) Top surface of Plinth filling @ 5 Ltrs / Sqm, ( iv) Junction of walls & floors @ 7.5 Ltrs / Sqm, (v) Soil along external perimetre of building @ 7.5 Ltrs I Sqm (vi) under apron of the building @ 5 Ltrs. /Sqm. The rates includes cost of all materials, labour, equipments, T&P complete. |
| 4 | Concrete with 4cm gauge stone ballast, coarse sand and cement in proportion of8:4:1 in foundation & under floors including supply of all materials, labour & T&P etc.complete. |
| 5 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 4:2:1 including supply of all material, labour, side shuttering if required and T&P etc. required for proper completion of work. |
| 6 | RCC work with cement approved coarse sand and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1:2 (M25) in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including necessary centering and smooth shuttering etc required for proper completion of work including supply of all materials,binding wire,labour and T&P etc. |
| 7 | As in item 6 above in slab in proportion 1:1:2 (M25). |
| 8 | As in item 6 above in the lighter beams i.e. having span upto 6m .in proportion 1:1:2 (M25). |
| 9 | As in item 6 above but infootings in proportion 1:1:2 (M25). |
| 10 | As in item 6 above but in RCC column in proportion 1:1:2 (M25). |
| 11 | 25 mm. thick DPC with cement concrete(1:1.5:3) including water proofing materials(preferably RECRON 3Sor Dr. fixit) as directed by the engineer-in-charge mixed in proportion as specified by the manufecturer. |
| 12 | 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and two parts of approved coarse sand laid in panels finished with 3mm. floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour & T&P etc. required for proper completion of the work. |
| 13 | 1st class brick work in 1: 6 cement and coarse sand (2.0 to 3.2 F.M.) mortarin Foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of work. |
| 14 | Ist Class brick laid dry in foundation and plinth as in circular soakpit walls of one brick thickness and 2.0 to 3.0 M depth including cutting moulding brick as required including cost of all materials, labour and T&P complete. |
| 15 | 1st class brick work in 1:6 cement & coarse sand for wall of one brick thick in super structure. |
| 16 | 1st class brick work in 1:4 cement & coarse sand for wall of half brick 4.5" (115mm) thick in super structure. |
| 17 | Indian Sal wood wrought framed and fixed including simple, mouldings straight work as in Chaukhats for main wooden gate including supply of all materials, labour and T&P etc.required forproper completion of work. |
| 18 | Supply and fixing galvanised mosquito proof jali (16x24 gauge) with M.S. flat of 20 x 3 mm. size, on both sides screwed or welded to window or door frame. |
| 19 | S/F of the following types of oxidized fittings of app. Quality. (a)16 mm dia x 300 mm long L-drop |
| 20 | (a)16 mm dia x 200 mm long L-drop |
| 21 | Tower bolt 10 mm dia x 100 mm long. |
| 22 | M.S. Handles 100mm long size |
| 23 | M.S. hinges 100mm long |
| 24 | Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISi marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work. |
| 25 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws. |
| 26 | Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer"s specification and direction of Engineer-in-charge. |
| 27 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer"s specifications and direction of Engineer-in-charge.(Non decorative finish) |
| 28 | Mild Steel or Iron work in heavy sizes such as trusses built up gates, door window frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment Including cost of all materials supplied by contractor; |
| 29 | TMT/Tor steel in plain work such as reinforced concrete wrought to required shape as necessary including bending for porper completion of the working and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. |
| 30 | P/F in position collapsible steel shutter with vertical channels 20 x 10 x 2 mm.(3/4" x 3/8"x 1/12") and braced with flat iron diagonals 20 x 5 mm.(3/4" x 3/16") size with top and bottom rails of "T"iron 40 x 40 x 6 mm. (1/2" x 1-1/2" x 1/4") with 38 mm dia steel pullys with bolts, nuts, nuts locking arrangement, stoppers, handles complete including applying a priming coat of approved red oxide paint complete as per direction of E/I. |
| 31 | 12 mm thick plaster 1:6 cement and coarse sand mortar including cost of all material, labor, T&P etc. complete. |
| 32 | Supply and fixing of 32 mm. thick Shisham wood/orequivalent (as per availability) part panelled and part glazed door and window shutter including supply and fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.) |
| 33 | Supply and fixing of 32 mm. thick Shisham wood fully glazed door and window shutter including supply and fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.) |
| 34 | 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work without base cc |
| 35 | 2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work without base cc |
| 36 | Providing and fixing glass strips of 3.15 mm thickness & 40mm/25mm depth in joints of floor and skirting at the time of laying floors, flush with floor level including supply of all materials, labour& T&P etc. required for proper completion of work. |
| 37 | Supply and Laying 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make, , laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 38 | Supply and Laying 6 mm thickglazed tiles in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete,including supply of all materials, labour and T&P etc. completion required forproper completion of work. |
| 39 | Providing and laying brick tiles over mumty roof grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: With common burnt clay F.P.S. (non modular) brick tiles of class designation 10 |
| 40 | Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol"/asian or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. |
| 41 | As in item 32 above but for every coat after first coat. |
| 42 | Finishing walls with water proof cement paint of approved made like "Super Snowcem" or equivalent quality on new work with two coats to give an even shade including supply of all materials, labour etc. required for proper completion of work. |
| 43 | One priming coat and one coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work. |
| 44 | Same as in item 35 but for every coat afterthe first coat. |
| 45 | P/F 15 mm dia B-class (Jindal,JTC etc make) ISI marked G.I. pipe completewith special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc including cost of all materials, labour T&P etc. complete (Internal work). |
| 46 | P/F 15 mm dia B-class (Jindal,JTC etc make) ISI marked G.I. pipe completewith special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc including cost of all materials, labour T&P etc. complete (External work). |
| 47 | P/F 25 mm dia B-class (Jindal,JTC etc make) ISI marked G.I. pipe completewith special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc including cost of all materials, labour T&P etc. complete (External work). |
| 48 | Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trap including supply of all materials,labour and T&P etc.complete. (UPPTCL SOR- 2023, Item No- 27.01) |
| 49 | Providing and fixing first quality white glazed European type W.C. Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trap including supply of all materials,labour and T&P etc.complete. |
| 50 | Providing and fixing 100 mm dia white glazed "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For WC) |
| 51 | Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for orooer comoletion of the work. |
| 52 | Providing and fixing 600 mm X 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of work. |
| 53 | Providing and fixing flat back 465 mm.x 355 mm x 265 mm. size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of work. |
| 54 | Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality LS.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 55 | Providing and fixing Stainless Steel sink 610x450x200 mm Heavy Quality( ISI MARKED ) including all materials, labour cartage T&P etc.required for proper comoletion of the work. |
| 56 | Providing and laying 75 mm SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. |
| 57 | Providing and laying 110 mm SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. |
| 58 | Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. |
| 59 | P/F BRASS BIB COCK, 15 mm dia (400 gsm) ISi mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
| 60 | Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISi mark heavy quality including supply of all materials, labour and T&P required for proper comoletion of work. |
| 61 | Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P reauired for proper completion of work. |
| 62 | P/F BRASS STOP COCK, 15 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
| 63 | Providing and fixing full way 15mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper comoletion of work. |
| 64 | P/F BRASS BIB COCK, 15 mm dia (200 gsm) ISi mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
| 65 | Providing and fixing CP BRASS Piller cock HEAVY QUALITY( 400gm) ( L &K and equi.) fittings, ISi mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
| 66 | Providing and fixing CP BRASS SHOWER HEAVY QUALITY ( > 225 gm) ( L &K and equi.) fittings, ISi mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
| 67 | Providing and fixing CONCEALED STOP COCK HEAVY QUALITY ( L &K and equi.) fittings, ISi mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
| 68 | Providing and fixing Cl GRATING 100 mm dia including all materials, labour cartage T&P etc.required for proper completion of the work. |
| 69 | Providing and Fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and T&P required for proper completion of work. the weight of hot dipped GI barbed wire having 12 SWG - 2 ply wires and 4 point ordinary barbs@ 150 mm (approx) CIC should be 100 gm per Meter. |
| 70 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door |
| 71 | 16 way, Double door |
| 72 | Supplying and fixing 40A MCB rating, double pole, 240 V, isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required. |
| 73 | Supply and fixing 20 Amp.S.P. MCB of Havells or equivalent make as approved by Engineer in charge including supply of all materials labour, T&P etc. required for the proper completion of the work. |
| 74 | Supply and laying 1.5 Sq.mm gauge copper wire of "Plaza" or equivalent make of approved quality including connecting with existing wiring in existing P.V.C.pipe. including all materials, labour and T&P complete. |
| 75 | Supply and laying 2.5 Sq.mm gauge copper wire of "Plaza" or equivalent make of approved quality including connecting with existing wiring in existing P.V.C.pipe. including all materials, labour and T&P complete. |
| 76 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.(Group-A) |
| 77 | Supply and replacing of 6 Amp. piano tyre switch of " Anchor" or equivalent make of approved quality including all materials, labour and T&P complete. |
| 78 | Supply and replacing of 6 Amp. piano tyre socket of " Anchor" or equivalent make of approved quality including all materials, labour and T&P complete. |
| 79 | Supply and replacing of 16 Amp. piano tyre switch of " Anchor" or equivalent make of approved quality including all materials, labour and T&P complete. |
| 80 | Supply and replacing of 16 Amp. piano tyre socket of " Anchor" or equivalent make of approved quality including all materials, labour and T&P complete. |
| 81 | Supply and Fixing of 3 blade ceiling fan of 1200 mm sweep of Havells or equivalent including one unit electronic regulator for speed control andall remaining accessories including safety pin, nut bolts, washers, etc required for proper completion of work as aproved by E/I. |
| 82 | Supply and Fixing of Angle bulb Holder of "Anchor" or equivalentmake ofapproved quality including all materials, labour and T&P complete. |
| 83 | Supply and fixing of 22W, LED tube light with fitting as per approved sample by Engineer in chargeincluding supply of all materials labour, T&P etc. required for the proper completion of the work. |
| 84 | Supply and Fixing of 5 blade Exhaust fan ventllo air dx 225 mm of Havells or equivalent make Including all material, T&P etc required for proper completion of work as aproved by E/I. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
