Military Engineer Services-MES has published Tender For Addition Alteration To Cupboards Of Bldg Nos Np -1 To Np-06 Of An Ad Regt At Mamun Mil Stn Under Ge (S) Mamun. Submission Date for this Tender is 15-12-2023. Building Work Tenders in mamun Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-12-2023 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick walls or stone walls or concrete surface of any description etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 2 | M&L for 15mm thick rendering in CM 1:4 on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 3 | M&L for preparation of newly plastered surfaces of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coats of oil bound distempercomplete all as specified and directed. |
| 4 | M&L for preparation of old plastered surfaces of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coats of oil bound distempercomplete all as specified and directed. |
| 5 | Taking down old unsv wooden cupboardexc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed. |
| 6 | M & L for steel almirahbed side locker made of mild steel sheet of 1 mm thick all joints weldingand fixing with wall, surface painted with two coats of enamel paintall as spd and directed as indrg .note :- size shall be 760mm, long, 440mm wide and 1270mm high. The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top sides, back, bottom and Front of almirah shall be of 1 mm thick mild steel. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet. Front shutters shall have two leaves. A steel chromium plated handle shall be provided to the shutter handle shall be 100mm long. A threeway locking device shall be provided to front shutters. Each leaf of front shutter shall be hinged with two numbers but hinges 75mm long and shutters shall be side hung. All joints and welding, fixing shall be done in accordance with standard workmanship. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer after preparation of steel surfaces. Painting shall be done with spray machine. Rest all as shown on drawings complete all as specified and directed. |
| 7 | M&Lsteel screw bolt with hexagonal orsqaure heads at one end and screwed the other or screwed both ends each screwd end to be fitted with washers and one hexagonal or squae nutall as spd and directed |
| 8 | M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed. |
| 9 | M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, haunching, benching, kerbs , mud stops, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 10 | M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6)complete all as specified and directed. |
| 11 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shaperequired including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diacomplete all as specified and directed. |
| 12 | S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared foranging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 13 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in beams, cantilevers, bressumers, lintels, shelves complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
