Public Works Department-PWD has published Tender For Making Aluminum Partition In Gallery And Other Civil Maintenance Works.. Submission Date for this Tender is 25-11-2023. Building Work Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Proding and fixing aluminium work for doors windows, ventilators and partitions with extruded built up standard tublar section/ appropriate Z section and other sections of approved make conferming to IS:733 and IS 1285 , fixing with dash fasteners of requried dia and size , including necessary filling up the gaps at at junction I.S at top bottom and sides with required EPDM rubber/ neoprene gasket etc alumimium section shall be smooth , rust free straight ,mitred and joints machanically where requried including cleat angle , aluminum snap beading for glazing / paneling C.P Brass/ stainless steel screws all complete as per architectural drawing and the direction of Engineer-in - charge (glazing, paneling , and dash fasteners to be paid for separately)::for fixed portion:: powder coated aluminium, minimum thickness of powder coating 50 micron)(dar -21.1.1.2)For awas no 301 |
2 | same as above item no 1 but For awan no 303 |
3 | same as above item no 1 but For awan no 701 |
4 | For shutter of doors windows & ventilators including providing and fixing hinges /pivots and making provision for fixing of fittings wherever requried including the cost EPDM rubber / neoprene gasket requried (fittings shall be paid for separately) powder coated aluminium, minimum thickness of powder coating 50 micron)(dar-21.1.2.2)For awas no 301 |
5 | same as above item no 4 but For awas no 303 |
6 | same as above item no 4 but For awan no 701 |
7 | proding and fixing glazing in aluminium door , window ventilator shutter and partition etc with EPDM rubber / neoprane gasket etc complete as perarchitectural drawing and the direction of Engineer-in - charge (cost of aluminium snap beading shall be paid in basic item:(with float glass panes of 5 mm thickness (weight not less than 12.50kg/sqm)(dar-21.3.2) For awas no 301 |
8 | same as above item no 7 but For awas no 303 |
9 | same as above item no 7 but For awas no 701 |
10 | Providing and Fixing of glazing in Aluminium door/ window, Ventilator shutter and Partitions etc. with EPDM Rubber/neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium Snap beading shall be paid in basic item). withACP Sheet (Aluminium Composite Pannel) For awas no 301 |
11 | same as above item no 10 but For awas no 303 |
12 | same as above item no 10 but For awas no 701 |
13 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI IS:3564, emboeesd on the body , door weight upto 36 kg to 80 kg and door width from 701 mm to 1000mm ) with double speed adjestment with necessary accessories and screws etc . complete (Dar-)9.84 For awas no 301 |
14 | same as above item no 13 but For awan no 303 |
15 | same as above item no 13 but For awan no 701 |
16 | FILLING the gap in between allmunium frame and adjacent RCC/Brick/stone work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete complying to ASTM C920, DIN 18540-F & ISO 11600. Upto 10mm depth and 10mm width item no 21.19.2 For awas no 301 |
17 | same as above item no 16 but For awas no 303 |
18 | same as above item no 16 but For awasno 701 |
19 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick &2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar dar21.12.1 For awas no 301 |
20 | same as above item no 19 but For awas no 303 |
21 | same as above item no 19 but For awas no 701 |
22 | providing and fixing roller for sliding door complete For awas no 301 |
23 | same as above item no 22 but For awas no 303 |
24 | same as above item no 22 but For awas no 701 |
25 | Providing , Fixing of chromium plated 100mmAl. garnet II morrise mortise lock set and a pair of lever handles of aproved qyality including all neceesary fitting ,labour T&Petccomplete work For awas no 301 |
26 | same as above item no 25 but For awas no 303 |
27 | same as above item no 25 but For awas no 701 |
28 | Supply and fixing C.P. Hand Shower (Health Faucet) with 8mm Dia 1.00 mtr. Long Flexible tube & wall huke L&K Make including supply of all material, labour T&P etc. complete. For Awas no 303 |
29 | same as above item no 28 but For awas no 701 |
30 | providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p brass screws and washers complete(dar-17.31) For awas no 301 |
31 | same as above item no 30 but For awan no 303 |
32 | same as above item no 30 but For awas no 701 |
33 | Providing and fixing C.P. Brass Two way Bib cock short body ) with wall flange L &K make including supply of all material, labour T&P etc. complete. For awas no 303 |
34 | Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-Charge with in a distance of 60 metres (200ft.). (S.I No- 708) For awasno 301 |
35 | same as above item no 34 but For awas no 303 |
36 | same as above item no 34 but For awas no 701 |
37 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(D.S.R Item-13.80) For awas no 301 |
38 | same as above item no 37 but For awas no 303 |
39 | same as above item no 37 but For awas no 701 |
40 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : One or more coats on old work (Royal Silk) Asian/Berger.(13.98.1) For awas no 301 |
41 | same as above item no 40 but For awasno 303 |
42 | same as above item no 40 but For awasno 701 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail