Chennai Port Trust-CPT has published Tender For Strengthening The Structural Members And Providing Improvement To The Building Occupied By The C And D Company At Cisf Barracks In South Zone. Submission Date for this Tender is 07-12-2023. Barrack Tenders in chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 1.Providing double scaffolding arrangement at the existing CISF barracks C&D coy building to carry out repair/improvement works by using steel pipes of required diameter or by Casuarina poles, including providing necessary Horizontal and verticalmembers, tie members, bracings etc., all round and platforms at various level adquate strength including removing the scaffolding with platform after completion of repair/improvement works all as per relevant specification and all as directed at site including all labour, materials, tools, equipments, coir, transport, fuel, etc., complete. Note : 1) Scaffolding will be measured only one time for entire repair/improvements (length x height) 2) 75% of the payment may be released after erecting of scaffolding in all respects. 3) 25% of the balance payment will be released only after completion of work. 4) If casuarina poles used for scaffolding, the bottom and top dia of casuarina poles are of 100mm and 50mm respectively. |
| 2 | 2.Dismantling and removing the existing wornout wooden/ Steel/aluminium doors, windows including frame in all floors less than3 Sqm area etc.,including frame with shutters without damaging the structures nearby, including transporting and handing over the same to departmental stores / RSO yard within a lead of 1km all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 3 | 3.Chipping thoroughly and removing the existing damaged plasteringfrom the items like lintel, column, sunshade, beam, waist slab, base slab,in all floorswherever required without damaging the nearby structures including collecting and depositing the debris nearby dust bins within a lead of 50 m all as specified andas directed, including scaffolding , all labour,tools, materials, etc., complete. |
| 4 | 4.Dismantling and removing the existing rich mix concrete items like lintel, column, sunshade, beam, waist slabin all floorswherever required without damaging the nearby structures including collecting and depositing the debris nearby dust bins within a lead of 50m all as specified andas directed, including scaffolding, all labour, tools, materials, etc., complete. |
| 5 | 5.Chipping thoroughly and removing the existing damaged floor tile, wall tiles and cement flooring at stair case steps plastering in all floorswherever required without damaging the nearby structures including collecting and depositing the debris nearby dust bins within a lead of 50m all as specified andas directed, including scaffolding , all labour, tools, materials, etc., complete. |
| 6 | 6.Dismantling and removing thebrick work manually/by mechanical meansin Cement Mortar to the required size and shape at all height/levelwherever requiredwithoutdamaging the nearby structures including collecting andbringingdown the debris to the ground leveland depositing the debris within a lead of 50m for disposingall as specified andas directed at site, including all all labour, tools, tackles, equipments, fuel, scaffolding, etc., complete |
| 7 | 7.Dismantling the existing IWC/EWC with all accessories in all floors etc., including collecting and depositing the debris within a lead of 50 m all as directedincluding all labour, tools, equipments, etc., complete. . |
| 8 | 8.Dismantling the existing Urinals with all accessories etc., including collecting and depositing the debris within a lead of 50m all as directedincluding all labour, tools, equipments, etc., complete. |
| 9 | 9.Earthwork excavation upto 1.5m by manually/mechanically in ordinary soil, sand, clay, mixed with roots, boulders, weighing individually less than 250 kg. debris, rubbish etc., as existing at site of work up to 1.5m depth for hardenning area, chamber, seweage line and where ever required, andas directed at site, including dressing of sides, dewatering if any as specified under relevant specifications, depositing the excavated earth within a lead of 50m all asper direction of Engineer-in-charge including shoring, shuttering, labour, tools tackles equipments, fuel, etc., complete. |
| 10 | 10.Dismantling/Removing the brick jelly concrete in the toilet sunken portion including collecting and depositing the Debris in all floorswith in a lead of 50m all as directed at site of work including all labour, tools, equipments,transport, etc., complete. |
| 11 | 11.Dismantling the RCC jally in the toilet/bath room portion including collecting and depositing the Debris in all floors with in a lead of 50m all as directed at site of work including all labour, tools, equipments,transport, etc., complete. |
| 12 | 12.Removing the existing GI/PVC water pipe/sewage pipes with all accessories etc., wherever required and handing over the same to department store/RSD yard all as per site condition including all labour, tools, equipments, etc., complete. |
| 13 | 13.Removing the existing damaged AC Corrugated roofing sheets from the head room of CISF building with out disburing adjacent area, including conveying and depositing the debris within a lead of 50m at ground level for disposal, all as directed including all labour, tools, equipments, transport, fuel, etc., complete. |
| 14 | 14.Providing and fixingIndian type Water Closet (Orissa pattern) (Parryware or Hindware) glazed white vitreousof size 580mm x 410mm (overall) or nearest size as available in the market with necessary "P" or "S" trap of approved make and qualityfixed in brick jelly cementconcretein volumetric proportion, curing and making good the disturbedportions, including providing 10 litres capacity ABS non corrosive polystyrene low level flushing cistern (Slim line of Parryware or equivalent) with 40mm dia flush pipe, fixing TW plugs etc., in sound working conditionwith all fittings and fixtures, etc., all in sound working condition, as per relevant specification and as directed at site including all materials, labour, tools, equipment, etc., complete. |
| 15 | 15.Providing and fixinggood quality European Water Closet white (Parryware or Hindware) with necessary "P" or "S" trap of approved make and qualityfixed in brick jelly cementconcretein volumetric proportion, curing and making good the disturbedportions, including providing 10 litres capacity ABS non corrosive polystyrene low level flushing cistern (Slim line of Parryware or equivalent) with 40mm dia flush pipe, plastic seat and cover fixing TW plugs etc., in sound working condition as per relevant specification and as directed at site including all materials, labour, tools, equipment, etc., complete. |
| 16 | 16.Providing and fixing in position First Class country wood (SAL/PADAUK) wrought main frames of finished size 95x70mm for doors with necessary M.S. hold fasts/clamps fixed suitably to the masonry/concrete including cutting pockets and grouting with P.C.C.1:3:6 (1 Cement : 3 Crushed stone sand : 6 graded down stone aggregate of 20mm down size) etc., and applying two coats of oil type wood preservative of approved brand and manufacture, complete. as per direction of Engineer-in-chargeincluding all labour, materials,tools, equipments, etc., complete. |
| 17 | 17.Providing and fixing First class country wood (SAL/PADAUK),30mm thick panelled shutters for doors/windows and fixing with butt hinges of required size with necessary screws, including panelling 16mm tk with single leaves / double leaves all complete adopting Port Authority"s manual anddirection of Engineer-in-charge including all labour, materials, tools, equipments, etc., complete. Note: Butt hinges with necessary screws shall be paid separately. |
| 18 | 18.Applying Reebaklens RR (Rust Remover) or equilant with brush for complete wetting of rusted materials/steel surface in all floors and preparing the surface free from all dust particles and loose materialsby using wire brush and applying two coat anti corresive (Nitozinc primer of Fosroc or equivalant) protective coat of approved quality all as per manufacture specification and as directed at site of work.The rate shall include cost of materials, labour, brushes, tools plant equipment, transport, fuel etc complete. Note: The paynment will be made only for actual surface area of reinforcement bars on which protective coating is applied |
| 19 | 19.Applying epoxy resin bonding agent (Nitro bond EPL of Fosroc or its equilant) at the top of existing concrete surface using short haired brush and applied on the old concrete surface to receive new finish/concrete/plastering all as per manufacture specification and as directed atsite of work.The rate shall include preparing the substrate,mixing the compound,applying,cost of materials, labour, brushes, tools plant equipment, transport, fuel etc complete. Note: The new concrete/plasteringshall be placed to the coated substrate, when it is in a tacky state. |
| 20 | 20.Preparing the exposed surfaces of all concrete members including repaired area and applying with two coats of protective coating in all floors using high performance aliphatic acrylate coating (Dekguard S standard of fosroc or its equivalent) including one coat of dekguard primer based on silence siloxane, all as per manufacturer"s specfications and as directed including all materials, labour, brushes, tools, plants, equipments, transport, fuel, etc,. complete. |
| 21 | 21.Supplying, transporting and fabricating HYSD bars for reinforcement and placing it in positionin RC work for all floors RCC members like column, beam, sunshade, waiste slab, lintel, etc.,including all handling, cutting, bending and welding the bar to the main rod with suitable welding rods, drilling and connecting the existing reinforcement wherever required including all materials and labour, lifting, tools, Plants and equipments, etc., complete. Note: i]The rate shall be inclusive of cost of steel, and fabrication/welding/drilling charge etc., complete. ii]Necessaryhooks/lifting hooks etc., whereverrequired shall be providedby operating the above item. a.10mm dia rod |
| 22 | b.12mm dia rod. |
| 23 | c.16mm dia rod |
| 24 | 22.Preparing and making holes 12mm dia up to a depth of150mm by using hand drilling machine in the existing RCC surface/masonry in all floors and preparing the surface free from all dust particles in the holes and placing 10mm dia TMT bars for vertical fins of all floorsto fix FOSROC LOKFIX S etc., all as per relevantspecification and all as directed at site of work including all labour, tools, materials, equipments, safety belts, helmet, safety shoes, fuel, etc., complete. Note: Payment will be made for steel reinforcement separately under relevant item. |
| 25 | 23.Supplying, fabricating and placing in positionThermo-Mechanically Treated bars of grade Fe-500D (TMT steel bars) or more as reinforcement for all RCC works wherever required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per relevant specification, drawings and as directed,including steel, all materials, labour, tools, equipment, transport, fuel, etc., complete. Note: The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., Binding wire will not be measured for payment purpose. |
| 26 | 24.Providing, casting,and fixing in position of RCC incement concrete of mix 1:1.5:3 in volumetric proportions (1 cement : 1.5 crushed stone sand : 3 stone aggregate (hard granite) of 20mm nominal size) inculding finishing the exposed surface,in cement mortor 1:3 (1cement 3 crused stone sand) 6 to 10mm thick with a floting coat of neat cement punning all as per relevant specification and as directed at siteincluding mixing, transporting, placing, ramming, consolidating, etc. including scafolding,shuttering, vibrating including cement, all labour, materials, curing, equipment, tools, etc. complete. a.Columns |
| 27 | b.Sunshade |
| 28 | c.Sunken slab |
| 29 | 25.Supplying mixing, pouring/pumping of anti washout non shrink cementitious micro concrete (RENDEROC RG(M) of FOSROC or equivalent) for repair the damaged portion ofcolumn, beam, Sunshade and waist slab in all floors etc., wherever required etc., mixed with 10mm to 6mm graded cleaned washed and saturated surface dry aggregate mixing the compound with the aggregates in the mix proportions as per manufacturer"s specifications and as directed. The rate includes conveying pouring the micro concrete using positive displacement pumps, or any other suitable method including providing leak proof shuttering ,, materials (including cement), equipments intercarting, mixing, placing, curing and all as directed at site of work including all materials, tools,tackles, equipments, transport, plant, fuel, scaffolding etc., complete. |
| 30 | 26.Providing Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in CM 1:5 (1 cement : 5 crushed stone sand) including making horizontal and vertical grooves 10mm wide 12mm deep complete and wherever required allas directed at site, including cement, all abour, materials, scafolding, tools, curing, equipments, etc., complete. |
| 31 | 27.Providing Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V levelin CM 1:4 (1 cement : 4 crushed stone sand) for all super structuresand wherever requiredallas directed at site, including cement, all labour, materials, scafolding, tools, curing, equipments, etc., complete. |
| 32 | 28.Preparing the surfaces of wall and plastering in Cement Mortar 1:5 (1cement : 5 crushed stone sand) 12 mm thick in all floors to the required finish, curing etc., all as directed at site including cement, alllabour, materials, tools, equipments, scaffolding, etc. complete. |
| 33 | 29. Preparing the surfaces of floor/wall and plastering in cement mortar 1:3 (1cement : 3 crushed stone sand)20mm thick and with neat cement slurryto the required finish, curing etc., all as directed at siteincluding cement, alllabour, materials, tools, equipments, scaffolding, etc. complete. |
| 34 | 30.Filling with Crushed stone sand in the toilet (sunken portion) in layers not exceeding 200mm depth in all floors andconsolidating the sand by watering and ramming etc; all as perspecification in the relevantschedule and as directed including curing, labour, materials, tools, equipment, etc. complete. |
| 35 | 31.Providing and laying of PCC for levelling course in CC 1:4:8 in volumetric proportions (1 cement : 4 crushed stone sand : 8 graded stone aggregate 40mm nominal size)consolidated including necessary excavation, levelling & dressing & finishing the top smooth all as per relevant specification as directed at siteincluding cement, all labour, materials, tools, equipments,etc., complete |
| 36 | 32.Providing and laying Brick jelly cement concrete 1:5:10in volumetric proportionfor levelling course in toilet, wherever reqiredincluding shuttering, mixing, transporting, placing, consolidation by ramming, curing etc., all as per drawing and as directed at site of work Including all labour, materials(including cement), tools, equipments, etc., complete. |
| 37 | 33.Providing and laying Ceramic glazed floor tiles of size 300x300mm with good quality, Anti-skid ceramic tiles (Jhonson/Kajaria/Nitco or other approved brands)(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 crushed stone sand) jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments including pointing the joints with white cement and matching pigments etc., complete., and as directed at site, including all materials, labour, tools, equipments, , etc., complete. |
| 38 | 34.Providing and laying Ceramic glazed wall dadoing tiles of size 300x300mm with good quality, Anti-skid ceramic tiles (Jhonson/Kajaria/Nitco or other approved brands) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, in a bedding mortar of 12mm thick in C.M 1:3 (1 cement : 3 crushed stone sand) and fixing with neat cement slurry and joints neatly pointed withwhite cement added with pigment to match the colour of the tiles to a required height as directed at siteincluding cement and all other materials, labour, tools, equipments, scaffolding, etc complete. |
| 39 | 35.Providing, fixing and laying in position rigid unplasticised PVC Pipe line 4Kgf/Sq.CM for sewage line and waste water line (Finolex or Truebore or Varun or equivalent) including necessary bends, clamps and specials, etc., and wherever required including cutting the brick masonry/concrete, refilling with cement mortar and making good the disturbed portions including jointing the pipes using necessary adhesives,making the joints water tight all as directed at site of work, including cement and all materials, labour, tools, scaffolding, equipments, etc., complete. a) 110mm dia |
| 40 | b) 75mm dia |
| 41 | 36.Providing and fixing 110mm dia PVC Nahani trap (floor trap with grattings suitable for PVC waste water pipe) embedding the trap making the joints water tight etc., allas directed including allmaterials, labour, tools, equipments etc., complete. |
| 42 | 37.Supplying and fixing of gully trap with chamber required size as per drawing no CEM/69A/91 (Chennai Port Trust Civil Engineering Works Manual drawing Amended) all as per relevant specifications and as directed including all materials, labour, tools, equipments etc., complete. |
| 43 | 38.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(Trubore/Finolex) or equivalent having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing, including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge for External work, including all labour, materials, tools, equipments, scaffolding etc., all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., and, including punching the masonry/concrete wherever required. a) 32mm dia |
| 44 | b) 25mm dia |
| 45 | c) 20mm dia |
| 46 | 39.Providing and layingof polished Granite stone slab of all colour and texture except black, Cherry/Ruby red 18mm thickness in bath shelvesand wherever required approved colour (steel grey) or of nearestsize available in the marketwith required slope and fixed with neat cement mortar cm 1:3 (1 cement : 3 crushed stone sand)including cutting the masonry wall for fixing the slab in position in the bath for soap tray including cost of cement and other materials,nosing the granite slab,labour, tools, equipments,etc., complete. |
| 47 | 40.Providing and fixing metro or equivalentC.P. brass fittings intoilets in sound working condition etc., all as directed including all materials, labour, tools, equipments, etc., complete. a) C.Pshower arm with flange 12" |
| 48 | b) C.P shower rose 4" dia |
| 49 | c) CP towel rail 24" long |
| 50 | d) C.P. 2way bib cock 15mm |
| 51 | e) C.P Bib Cock 15mm |
| 52 | f) C.P Stop Cock 15mm (concealed) |
| 53 | g) C.P. brass Angle Valve 15mm dia as per IS:8931 |
| 54 | h) Gun metal ball valve 32mm |
| 55 | i) Gun metal ball valve 25mm |
| 56 | 41.Providing and fixing on wall face PVCbevelled edge mirror of good quality glass of size 600x450mm with plywood back of approved quality all as directed at site of work all labour, materials, tools, equipments etc., complete. |
| 57 | 42.Providing and fixing good quality white vitreous flat back lipped in front urinal basin (white) (Parry ware or Hind ware) 430x260x350mm size fixing to wooden plug with brass screws including all fittings of approved brand &pattern and unions, PVC waste fittings of 32mm dia, all as directed at site of work including cement and all labour, materials, tools, equipments etc., complete. |
| 58 | 43.Providing and laying quality semi circular tiles for Urinal drains of approved colour set in C.M 1:3 (1 cement : 3 crushed stone sand) 6mm to 10mm thickwith neat cement slurry and joints neatly pointed with pigment to match the colour of the tiles curing all as directed including cement and all other materials, labour, tools, equipments., etc complete. |
| 59 | 44.Providing and fixing good quality vitreous size 550x400mm hand wash basin (White) as available in the market (Kings mere basin of Parryware or Hindware)with a single 15mm c.p. brass pillar tap, c.p. waste fitting, 32mm dia c.p. brass union, 15mm dia PVC inlet connection, 32mm dia PVC waste pipe fittings, a pair of cast iron bracketssuitable for fixing the wash hand basin as available in the market, including painting the brackets, etc. with two coats of synthetic enamel paint over one coat of primer, fixing the brackets with teakwood plug and making good the disturbed portion, etc., all as directed in sound working condition including cement and other materials, labour, tools, equipments etc. complete. |
| 60 | 45.Scrapping and removing the existing white/colour wash and preparing thewall/ ceiling surfaces for and applying colour washto give an even shade all as directed at site of work including all labour, scaffolding, materials, tools, equipments, wirebrushes, etc. complete. |
| 61 | 46.Preparing the surfaces of inner wallsurfaces and applying two coats of plastic emulsion paint (asian orequivalent) to give an even shade all as directed at site of work wherever required including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 62 | 47.Preparing the surfaces of old ceiling and applyingtwocoatsofwhite washing using Lovelycem or equivalent to give an even shade all as directed at site of work wherever requiredincluding all labour, materials, tools, brushes,tackles, equipments, scaffolding etc., complete. |
| 63 | 48.Preparing the surfaces ofwall and applying two coats of colour washing with Acrylic Smooth exterior paint (asian or equivalent) over a one coat of cement primerto give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. |
| 64 | 49.Supplying and fixing PVC cylindrical water tank of 1000 litre capacity of ISI quality (Sintex or equivalent) made up of non toxic UV resistant plastic of uniform thickness, strong and durable including providing top lid with locking arrangements and 25mm dia PVC outlet pipe with suitable wash out pipe, over flow pipe etc., including fixing the tank on the masonry pedestal at terrace including all accessories as per relevant specification and as directed at site of workincluding all mateials, labour, tools, transportation, fuel, scaffolding etc.,complete |
| 65 | 50.Preparing the surfaces of wooden members and painting with two coats of Deluxe Multi Surface Paint over a coat of primer (asian orequivalent) of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note: 1.Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2.The above quantity is inclusive of painting co-efficient. |
| 66 | 51.Providing and fixing aluminium fittings ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws allas directed including allmaterials, labour, tools, screws, equipments etc., complete. a) Butt Hinges 100mm Long with wood screws |
| 67 | b) Butt hinges - 125mm long |
| 68 | c) Anodized aluminium handles 75mm with plate 125x32 mm |
| 69 | d) Aldrop 200mm long |
| 70 | e) Aldrop 250mm long |
| 71 | f) Aluminium tower bolt - 150mm long |
| 72 | g) Aluminium tower bolt - 250mm long |
| 73 | 52.Supplying fabricating and fixing colour anodized aluminium main frames for Windows using anodized aluminium sections of size as per drawing and as directed including supplying and fixing necessary accessories like anodized sluminium cleats angle fully threaded 75mmmetal screws, wooden plugs ,etc., cutting the masonry / concrete etc., wherever required, fixing the frames using suitable clamps making good the disturbed portions all as per relevant specifications and drawings and as directed including all labour, tools materials, equipments etc., complete. |
| 74 | 53.Supplying fabricating and fixing colour anodized aluminium Window shutter frame using anodized aluminium sections of size as per drawing and as directed including supplying and fixing necessary accessories like anodized aluminium cleats angle fully threaded 75mmmetal screws, wooden plugs ,etc., cutting the masonry / concrete etc., wherever required, fixing the frames using suitable clamps making good the disturbed portions all as per relevant specifications and drawings and as directed including all labour, tools materials, equipments etc., complete. |
| 75 | 54.Supplying fabricating and fixing colour anodized aluminium main frames for Windows using anodized aluminium sections of size as per drawing and as directed including supplying and fixing necessary accessories like anodized sluminium cleats angle fully threaded 75mmmetal screws, wooden plugs ,etc., cutting the masonry / concrete etc., wherever required, fixing the frames using suitable clamps making good the disturbed portions all as per relevant specifications and drawings and as directed including all labour, tools materials, equipments etc., complete. |
| 76 | 55.Supplying and fixing in position 5mm thick plain glass (Saint Gobain or Modiguard) for windows and louvered ventilators with all accessories like anodized aluminium snap on, beading, rubber beading, country wood beadings, etc., all as per relevant specification and as directed at site of work including all labour, materials, tools, scaffolding, equipments, etc., complete. NOTE: 1) The actual area of glass used alone will be measured for payment purpose. 2) The rate shall include the cost of rubber beading, country wood beading etc., |
| 77 | 56.Providing and fixing anodized aluminium decorative grills of 6mm thick or nearest thickness with mesh size 100mm of approved design available in the market to the wall with F/U channel, all as directed including all materials, labour, tools, equipment, etc; complete.Note: The actual area of grill used alone will be measured for payment purpose. |
| 78 | 57.Providing and fixing Aluminium profile industrial troughed sheet 0.71mm thick, the profile detail width 1044/920mm, cover width 1000/875mm or nearest size as available in the Market and fixing in position with necessary G.I. L/J Hook of 10mm thick wherever required without damaging the nearby structure all as specified andas directed, includingall labour, tools, materials, etc., complete. |
| 79 | 58.Supplying, fabricating and fixing the M.S Grill as directed at site using suitable 12mm MS Square bars, verticle 100mm c/c and horizontal 400mm c/c and making necessary pocket (dismantling the existing brick work) includingprovidingand fixing necessaryarrangements including fixing the Grill to the pocketwithPCC 1:2:4(1 cement: 2 crushed stone sand : 4 stone graded aggregate of 20mm graded down to 12mm size) in volumetric proportions etc.,all as directed at site of work including scaffolding, fixing grill in proper alignment, including cement, alll materials, labour, tools, transport, fuel , etc., complete NOTE:1) The payment is based on the total weight of theMS flats, bars, etc as fabricated.2) The weighment will made at site or any other place as approved by the engineer-in-charge. Necessary charges for transport, weighment. etc., will be borne by the contractor. |
| 80 | 59.Preparing the surfaces of steel members and applying two coat ofAnti corrosive bitumastic paint of approved quality, colour to give an even shade all as directed at site of work including providing scaffolding, all materials, labour,brushes, tools, equipments, transport, fuel etc., complete. |
| 81 | 60.Loading, Transporting,dumping and levelling the surplus earth/debris from the site tothe low lying area in theport premiseswith in a lead of 2Kms as directed including levelling at dumping site, all materials, labour, tools, equipment, fuel,etc., complete. Note: 1) The contractor shall maintain tripsheets in triplicate in approved format at his own cost for the quantity of debris/earth transported. 2) No interim paymentwill be made. A deduction of20 % will be made on lorry cubicalcontent for earth transportation and No deduction of voids for debris will be made. 3) How ever, the final quantityof Debriswill be restricted toactual quantity of demolishing item. a) Surplus earth. |
| 82 | b) Debris |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
